Merge tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2020-10-14 15:56:58 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2020-10-14 15:56:58 -0700
commit: 1a31c12371556bfbe511edd268dab721b504d511 (patch)
tree: 862c9a1cf5fb3a95422c4f3db9650e84cd04b635
parent: f888bdf9823c85fe945c4eb3ba353f749dec3856 (diff)
parent: 6d81dc3c79d46b66b29712eb1ac5ad2cbe4231d2 (diff)
download: linux-1a31c12371556bfbe511edd268dab721b504d511.tar.gz
55 files changed, 2493 insertions, 186 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
new file mode 100644
index 000000000000..979a2d62513f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -0,0 +1,15 @@
+What:		/sys/bus/spi/devices/.../bmc_version
+Date:		June 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read only. Returns the hardware build version of Intel
+		MAX10 BMC chip.
+		Format: "0x%x".
+
+What:		/sys/bus/spi/devices/.../bmcfw_version
+Date:		June 2020
+KernelVersion:	5.10
+Contact:	Xu Yilun <yilun.xu@intel.com>
+Description:	Read only. Returns the firmware version of Intel MAX10
+		BMC chip.
+		Format: "0x%x".
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
deleted file mode 100644
index 3b7811804cb4..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml
+++ /dev/null
@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung S5P/Exynos SoC series System Registers (SYSREG)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos4-sysreg
-          - samsung,exynos5-sysreg
-  required:
-    - compatible
-
-properties:
-  compatible:
-    allOf:
-      - items:
-          - enum:
-              - samsung,exynos4-sysreg
-              - samsung,exynos5-sysreg
-          - const: syscon
-
-  reg:
-    maxItems: 1
-
-examples:
-  - |
-    syscon@10010000 {
-        compatible = "samsung,exynos4-sysreg", "syscon";
-        reg = <0x10010000 0x400>;
-    };
-
-    syscon@10050000 {
-        compatible = "samsung,exynos5-sysreg", "syscon";
-        reg = <0x10050000 0x5000>;
-    };
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 000000000000..e2d2c10e536a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+  output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+      minItems: 1
+      maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 000000000000..010333cb25c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 000000000000..e8dfa6507f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 5c6eabeed341..d2a6e835c257 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -31,8 +31,8 @@ ab8500-btemp		 :			: vtvout       : Battery Temperature
 			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
 			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
 			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
+			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
 ab8500-charger		 :			: vddadc       : Charger interface
 			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
 			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
index e6f168db6c72..5ca75d888b4a 100644
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -71,7 +71,7 @@ Example:
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
 
 			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
 			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 000000000000..074243c40891
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB3930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
+      - const: ene,kb3930
+  reg:
+    maxItems: 1
+
+  off-gpios:
+    description: GPIO used with the shutdown protocol on Ariel
+    maxItems: 2
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+        reg = <0x58>;
+        system-power-controller;
+
+        off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+                    <&gpio 127 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 95e47f317ed2..d08e8fe76446 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -149,6 +149,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -157,7 +158,7 @@ examples:
             compatible = "gw,gsc";
             reg = <0x20>;
             interrupt-parent = <&gpio1>;
-            interrupts = <4 GPIO_ACTIVE_LOW>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
             #interrupt-cells = <1>;
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 000000000000..eb3b43547cb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  The board management controller may contain different IP blocks like
+  watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9a-f]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9a-f]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9a-f]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9a-f]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            compatible = "kontron,sl28cpld";
+            reg = <0x4a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            watchdog@4 {
+                compatible = "kontron,sl28cpld-wdt";
+                reg = <0x4>;
+                kontron,assert-wdt-timeout-pin;
+            };
+
+            hwmon@b {
+                compatible = "kontron,sl28cpld-fan";
+                reg = <0xb>;
+            };
+
+            pwm@c {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xc>;
+                #pwm-cells = <2>;
+            };
+
+            pwm@e {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xe>;
+                #pwm-cells = <2>;
+            };
+
+            gpio@10 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x10>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names = "a", "b", "c";
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@15 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x15>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@1a {
+                compatible = "kontron,sl28cpld-gpo";
+                reg = <0x1a>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@1b {
+                compatible = "kontron,sl28cpld-gpi";
+                reg = <0x1b>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            interrupt-controller@1c {
+                compatible = "kontron,sl28cpld-intc";
+                reg = <0x1c>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
deleted file mode 100644
index 41671e0dc26b..000000000000
--- a/Documentation/devicetree/bindings/mfd/lp87565.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-TI LP87565 PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp87565", "ti,lp87565-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87565_pmic: pmic@60 {
-	compatible = "ti,lp87565-q1";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck10-in-supply = <&vsys_3v3>;
-	buck23-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck10_reg: buck10 {
-			/* VDD_MPU */
-			regulator-name = "buck10";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		buck23_reg: buck23 {
-			/* VDD_GPU */
-			regulator-name = "buck23";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-TI LP87561 PMIC:
-
-This is a single output 4-phase regulator configuration
-
-Required properties:
-  - compatible:	"ti,lp87561-q1"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx should match
-			the supply_name populated in driver.
-Example:
-
-lp87561_pmic: pmic@62 {
-	compatible = "ti,lp87561-q1";
-	reg = <0x62>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck3210-in-supply = <&vsys_3v3>;
-
-	regulators: regulators {
-		buck3210_reg: buck3210 {
-			/* VDD_CORE */
-			regulator-name = "buck3210";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
index c3c02ce73cde..386eec06cf08 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
@@ -39,7 +39,7 @@ pmic: pmic@4b {
 	compatible = "rohm,bd70528";
 	reg = <0x4b>;
 	interrupt-parent = <&gpio1>;
-	interrupts = <29 GPIO_ACTIVE_LOW>;
+	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 	clocks = <&osc 0>;
 	#clock-cells = <0>;
 	clock-output-names = "bd70528-32k-out";
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 5317a7d69aa5..8f4764a9ed45 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -44,6 +44,10 @@ properties:
               - hisilicon,peri-subctrl
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
+              - samsung,exynos3-sysreg
+              - samsung,exynos4-sysreg
+              - samsung,exynos5-sysreg
+              - samsung,exynos5433-sysreg
 
           - const: syscon
 
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
new file mode 100644
index 000000000000..c4fc5345d38d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87524-Q1 four 1-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87524-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[0123]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck0
+      - buck1
+      - buck2
+      - buck3
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck[0123]-in-supply$":
+    description: Voltage regulator supply for each BUCK converter
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck0-in-supply
+  - buck1-in-supply
+  - buck2-in-supply
+  - buck3-in-supply
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87524-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vdd_5v0>;
+            buck1-in-supply = <&vdd_5v0>;
+            buck2-in-supply = <&vdd_5v0>;
+            buck3-in-supply = <&vdd_5v0>;
+
+            regulators {
+                buck0_reg: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                buck1_reg: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
new file mode 100644
index 000000000000..a7e57c0913e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87561-Q1 single 4-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87561-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck3210-in-supply:
+    description:
+      Voltage regulator supply for all the four BUCK converters.
+
+  regulators:
+    type: object
+
+    properties:
+      buck3210:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck3210
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck3210-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87561-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck3210-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck3210_reg: buck3210 {
+                    /* VDD_CORE */
+                    regulator-name = "buck3210";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
new file mode 100644
index 000000000000..1da6d6a958c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,lp87565
+      - const: ti,lp87565-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck10-in-supply:
+    description:
+      Voltage regulator supply for BUCK0 and BUCK1 converters.
+
+  buck23-in-supply:
+    description:
+      Voltage regulator supply for BUCK2 and BUCK3 converters.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck(10|23)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck10
+      - buck23
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck10-in-supply
+  - buck23-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87565-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck10-in-supply = <&vsys_3v3>;
+            buck23-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck10_reg: buck10 {
+                    /* VDD_MPU */
+                    regulator-name = "buck10";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck23_reg: buck23 {
+                    /* VDD_GPU */
+                    regulator-name = "buck23";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
new file mode 100644
index 000000000000..981cfec53f37
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The controller supports one PWM channel and supports only four distinct
+  frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
new file mode 100644
index 000000000000..179272f74de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-wdt
+
+  reg:
+    maxItems: 1
+
+  kontron,assert-wdt-timeout-pin:
+    description: The SMARC standard defines a WDT_TIME_OUT# pin. If this
+      property is set, this output will be pulsed when the watchdog bites
+      and the system resets.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 4bcb1a75fd4a..e6b91ab12978 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -156,6 +156,7 @@ Hardware Monitoring Kernel Drivers
    sht3x
    shtc1
    sis5595
+   sl28cpld
    smm665
    smsc47b397
    smsc47m192
diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst
new file mode 100644
index 000000000000..7ed65f78250c
--- /dev/null
+++ b/Documentation/hwmon/sl28cpld.rst
@@ -0,0 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver sl28cpld
+======================
+
+Supported chips:
+
+   * Kontron sl28cpld
+
+     Prefix: 'sl28cpld'
+
+     Datasheet: not available
+
+Authors: Michael Walle <michael@walle.cc>
+
+Description
+-----------
+
+The sl28cpld is a board management controller which also exposes a hardware
+monitoring controller. At the moment this controller supports a single fan
+supervisor. In the future there might be other flavours and additional
+hardware monitoring might be supported.
+
+The fan supervisor has a 7 bit counter register and a counter period of 1
+second. If the 7 bit counter overflows, the supervisor will automatically
+switch to x8 mode to support a wider input range at the loss of
+granularity.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+fan1_input		Fan RPM. Assuming 2 pulses per revolution.
+======================= ========================================================
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e1376466d8b0..5d4de5cd6759 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1248,6 +1248,18 @@ config GPIO_RC5T583
 	  This driver provides the support for driving/reading the gpio pins
 	  of RC5T583 device through standard gpio library.
 
+config GPIO_SL28CPLD
+	tristate "Kontron sl28cpld GPIO support"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	select GPIO_REGMAP
+	select GPIOLIB_IRQCHIP
+	select REGMAP_IRQ
+	help
+	  This enables support for the GPIOs found on the Kontron sl28 CPLD.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-sl28cpld.
+
 config GPIO_STMPE
 	bool "STMPE GPIOs"
 	depends on MFD_STMPE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6c3791a55a7b..09dada80ac34 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -131,6 +131,7 @@ obj-$(CONFIG_GPIO_SCH311X)		+= gpio-sch311x.o
 obj-$(CONFIG_GPIO_SCH)			+= gpio-sch.o
 obj-$(CONFIG_GPIO_SIFIVE)		+= gpio-sifive.o
 obj-$(CONFIG_GPIO_SIOX)			+= gpio-siox.o
+obj-$(CONFIG_GPIO_SL28CPLD)		+= gpio-sl28cpld.o
 obj-$(CONFIG_GPIO_SODAVILLE)		+= gpio-sodaville.o
 obj-$(CONFIG_GPIO_SPEAR_SPICS)		+= gpio-spear-spics.o
 obj-$(CONFIG_GPIO_SPRD)			+= gpio-sprd.o
diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c
new file mode 100644
index 000000000000..889b8f5622c2
--- /dev/null
+++ b/drivers/gpio/gpio-sl28cpld.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld GPIO driver
+ *
+ * Copyright 2020 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* GPIO flavor */
+#define GPIO_REG_DIR	0x00
+#define GPIO_REG_OUT	0x01
+#define GPIO_REG_IN	0x02
+#define GPIO_REG_IE	0x03
+#define GPIO_REG_IP	0x04
+
+/* input-only flavor */
+#define GPI_REG_IN	0x00
+
+/* output-only flavor */
+#define GPO_REG_OUT	0x00
+
+enum sl28cpld_gpio_type {
+	SL28CPLD_GPIO = 1,
+	SL28CPLD_GPI,
+	SL28CPLD_GPO,
+};
+
+static const struct regmap_irq sl28cpld_gpio_irqs[] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+static int sl28cpld_gpio_irq_init(struct platform_device *pdev,
+				  unsigned int base,
+				  struct gpio_regmap_config *config)
+{
+	struct regmap_irq_chip_data *irq_data;
+	struct regmap_irq_chip *irq_chip;
+	struct device *dev = &pdev->dev;
+	int irq, ret;
+
+	if (!device_property_read_bool(dev, "interrupt-controller"))
+		return 0;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL);
+	if (!irq_chip)
+		return -ENOMEM;
+
+	irq_chip->name = "sl28cpld-gpio-irq",
+	irq_chip->irqs = sl28cpld_gpio_irqs;
+	irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
+	irq_chip->num_regs = 1;
+	irq_chip->status_base = base + GPIO_REG_IP;
+	irq_chip->mask_base = base + GPIO_REG_IE;
+	irq_chip->mask_invert = true,
+	irq_chip->ack_base = base + GPIO_REG_IP;
+
+	ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
+					      config->regmap, irq,
+					      IRQF_SHARED | IRQF_ONESHOT,
+					      0, irq_chip, &irq_data);
+	if (ret)
+		return ret;
+
+	config->irq_domain = regmap_irq_get_domain(irq_data);
+
+	return 0;
+}
+
+static int sl28cpld_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_regmap_config config = {0};
+	enum sl28cpld_gpio_type type;
+	struct regmap *regmap;
+	u32 base;
+	int ret;
+
+	if (!pdev->dev.parent)
+		return -ENODEV;
+
+	type = (uintptr_t)device_get_match_data(&pdev->dev);
+	if (!type)
+		return -ENODEV;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &base);
+	if (ret)
+		return -EINVAL;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	config.regmap = regmap;
+	config.parent = &pdev->dev;
+	config.ngpio = 8;
+
+	switch (type) {
+	case SL28CPLD_GPIO:
+		config.reg_dat_base = base + GPIO_REG_IN;
+		config.reg_set_base = base + GPIO_REG_OUT;
+		/* reg_dir_out_base might be zero */
+		config.reg_dir_out_base = GPIO_REGMAP_ADDR(base + GPIO_REG_DIR);
+
+		/* This type supports interrupts */
+		ret = sl28cpld_gpio_irq_init(pdev, base, &config);
+		if (ret)
+			return ret;
+		break;
+	case SL28CPLD_GPO:
+		config.reg_set_base = base + GPO_REG_OUT;
+		break;
+	case SL28CPLD_GPI:
+		config.reg_dat_base = base + GPI_REG_IN;
+		break;
+	default:
+		dev_err(&pdev->dev, "unknown type %d\n", type);
+		return -ENODEV;
+	}
+
+	return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config));
+}
+
+static const struct of_device_id sl28cpld_gpio_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-gpio", .data = (void *)SL28CPLD_GPIO },
+	{ .compatible = "kontron,sl28cpld-gpi", .data = (void *)SL28CPLD_GPI },
+	{ .compatible = "kontron,sl28cpld-gpo", .data = (void *)SL28CPLD_GPO },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match);
+
+static struct platform_driver sl28cpld_gpio_driver = {
+	.probe = sl28cpld_gpio_probe,
+	.driver = {
+		.name = "sl28cpld-gpio",
+		.of_match_table = sl28cpld_gpio_of_match,
+	},
+};
+module_platform_driver(sl28cpld_gpio_driver);
+
+MODULE_DESCRIPTION("sl28cpld GPIO Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 676ad6ee7f8d..a850e4f0e0bd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1489,6 +1489,16 @@ config SENSORS_RASPBERRYPI_HWMON
 	  This driver can also be built as a module. If so, the module
 	  will be called raspberrypi-hwmon.
 
+config SENSORS_SL28CPLD
+	tristate "Kontron sl28cpld hardware monitoring driver"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	help
+	  If you say yes here you get support for the fan supervisor of the
+	  sl28cpld board management controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sl28cpld-hwmon.
+
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8193340a7238..9db2903b61e5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -161,6 +161,7 @@ obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
+obj-$(CONFIG_SENSORS_SL28CPLD)	+= sl28cpld-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
 obj-$(CONFIG_SENSORS_SHT3x)	+= sht3x.o
diff --git a/drivers/hwmon/sl28cpld-hwmon.c b/drivers/hwmon/sl28cpld-hwmon.c
new file mode 100644
index 000000000000..e48f58ec5b9c
--- /dev/null
+++ b/drivers/hwmon/sl28cpld-hwmon.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld hardware monitoring driver
+ *
+ * Copyright 2020 Kontron Europe GmbH
+ */
+
+#include <linux/bitfield.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define FAN_INPUT		0x00
+#define   FAN_SCALE_X8		BIT(7)
+#define   FAN_VALUE_MASK	GENMASK(6, 0)
+
+struct sl28cpld_hwmon {
+	struct regmap *regmap;
+	u32 offset;
+};
+
+static umode_t sl28cpld_hwmon_is_visible(const void *data,
+					 enum hwmon_sensor_types type,
+					 u32 attr, int channel)
+{
+	return 0444;
+}
+
+static int sl28cpld_hwmon_read(struct device *dev,
+			       enum hwmon_sensor_types type, u32 attr,
+			       int channel, long *input)
+{
+	struct sl28cpld_hwmon *hwmon = dev_get_drvdata(dev);
+	unsigned int value;
+	int ret;
+
+	switch (attr) {
+	case hwmon_fan_input:
+		ret = regmap_read(hwmon->regmap, hwmon->offset + FAN_INPUT,
+				  &value);
+		if (ret)
+			return ret;
+		/*
+		 * The register has a 7 bit value and 1 bit which indicates the
+		 * scale. If the MSB is set, then the lower 7 bit has to be
+		 * multiplied by 8, to get the correct reading.
+		 */
+		if (value & FAN_SCALE_X8)
+			value = FIELD_GET(FAN_VALUE_MASK, value) << 3;
+
+		/*
+		 * The counter period is 1000ms and the sysfs specification
+		 * says we should asssume 2 pulses per revolution.
+		 */
+		value *= 60 / 2;
+
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	*input = value;
+	return 0;
+}
+
+static const u32 sl28cpld_hwmon_fan_config[] = {
+	HWMON_F_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info sl28cpld_hwmon_fan = {
+	.type = hwmon_fan,
+	.config = sl28cpld_hwmon_fan_config,
+};
+
+static const struct hwmon_channel_info *sl28cpld_hwmon_info[] = {
+	&sl28cpld_hwmon_fan,
+	NULL
+};
+
+static const struct hwmon_ops sl28cpld_hwmon_ops = {
+	.is_visible = sl28cpld_hwmon_is_visible,
+	.read = sl28cpld_hwmon_read,
+};
+
+static const struct hwmon_chip_info sl28cpld_hwmon_chip_info = {
+	.ops = &sl28cpld_hwmon_ops,
+	.info = sl28cpld_hwmon_info,
+};
+
+static int sl28cpld_hwmon_probe(struct platform_device *pdev)
+{
+	struct sl28cpld_hwmon *hwmon;
+	struct device *hwmon_dev;
+	int ret;
+
+	if (!pdev->dev.parent)
+		return -ENODEV;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!hwmon->regmap)
+		return -ENODEV;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &hwmon->offset);
+	if (ret)
+		return -EINVAL;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+				"sl28cpld_hwmon", hwmon,
+				&sl28cpld_hwmon_chip_info, NULL);
+	if (IS_ERR(hwmon_dev))
+		dev_err(&pdev->dev, "failed to register as hwmon device");
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id sl28cpld_hwmon_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-fan" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_hwmon_of_match);
+
+static struct platform_driver sl28cpld_hwmon_driver = {
+	.probe = sl28cpld_hwmon_probe,
+	.driver = {
+		.name = "sl28cpld-fan",
+		.of_match_table = sl28cpld_hwmon_of_match,
+	},
+};
+module_platform_driver(sl28cpld_hwmon_driver);
+
+MODULE_DESCRIPTION("sl28cpld Hardware Monitoring Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 570a7706875c..c6098eee0c7c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -246,6 +246,14 @@ config RENESAS_RZA1_IRQC
 	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
 	  to 8 external interrupts with configurable sense select.
 
+config SL28CPLD_INTC
+	bool "Kontron sl28cpld IRQ controller"
+	depends on MFD_SL28CPLD=y || COMPILE_TEST
+	select REGMAP_IRQ
+	help
+	  Interrupt controller driver for the board management controller
+	  found on the Kontron sl28 CPLD.
+
 config ST_IRQCHIP
 	bool
 	select REGMAP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index f1525149b7a2..80e3a84709ee 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -114,3 +114,4 @@ obj-$(CONFIG_LOONGSON_HTVEC)		+= irq-loongson-htvec.o
 obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-loongson-pch-pic.o
 obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
 obj-$(CONFIG_MST_IRQ)			+= irq-mst-intc.o
+obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
diff --git a/drivers/irqchip/irq-sl28cpld.c b/drivers/irqchip/irq-sl28cpld.c
new file mode 100644
index 000000000000..0aa50d025ef6
--- /dev/null
+++ b/drivers/irqchip/irq-sl28cpld.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld interrupt controller driver
+ *
+ * Copyright 2020 Kontron Europe GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define INTC_IE 0x00
+#define INTC_IP 0x01
+
+static const struct regmap_irq sl28cpld_irqs[] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+struct sl28cpld_intc {
+	struct regmap *regmap;
+	struct regmap_irq_chip chip;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+static int sl28cpld_intc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sl28cpld_intc *irqchip;
+	int irq;
+	u32 base;
+	int ret;
+
+	if (!dev->parent)
+		return -ENODEV;
+
+	irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL);
+	if (!irqchip)
+		return -ENOMEM;
+
+	irqchip->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!irqchip->regmap)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &base);
+	if (ret)
+		return -EINVAL;
+
+	irqchip->chip.name = "sl28cpld-intc";
+	irqchip->chip.irqs = sl28cpld_irqs;
+	irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs);
+	irqchip->chip.num_regs = 1;
+	irqchip->chip.status_base = base + INTC_IP;
+	irqchip->chip.mask_base = base + INTC_IE;
+	irqchip->chip.mask_invert = true,
+	irqchip->chip.ack_base = base + INTC_IP;
+
+	return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
+					       irqchip->regmap, irq,
+					       IRQF_SHARED | IRQF_ONESHOT, 0,
+					       &irqchip->chip,
+					       &irqchip->irq_data);
+}
+
+static const struct of_device_id sl28cpld_intc_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-intc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_intc_of_match);
+
+static struct platform_driver sl28cpld_intc_driver = {
+	.probe = sl28cpld_intc_probe,
+	.driver = {
+		.name = "sl28cpld-intc",
+		.of_match_table = sl28cpld_intc_of_match,
+	}
+};
+module_platform_driver(sl28cpld_intc_driver);
+
+MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 33df0837ab41..8b99a13669bf 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -290,7 +290,8 @@ config MFD_CS47L92
 
 config MFD_ASIC3
 	bool "Compaq ASIC3"
-	depends on GPIOLIB && ARM
+	depends on GPIOLIB
+	depends on ARM || COMPILE_TEST
 	select MFD_CORE
 	help
 	  This driver supports the ASIC3 multifunction chip found on many
@@ -398,6 +399,17 @@ config MFD_DLN2
 	  etc. must be enabled in order to use the functionality of
 	  the device.
 
+config MFD_ENE_KB3930
+	tristate "ENE KB3930 Embedded Controller support"
+	depends on I2C
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select MFD_CORE
+	help
+	  This adds support for the power-off functionality and access to
+	  the registers that control LEDS and USB port power on ENE KB3930
+	  Embedded Controller. To use the LED functionality LEDS_ARIEL must
+	  be enabled.
+
 config MFD_EXYNOS_LPASS
 	tristate "Samsung Exynos SoC Low Power Audio Subsystem"
 	depends on ARCH_EXYNOS || COMPILE_TEST
@@ -493,7 +505,7 @@ config MFD_HI6421_PMIC
 	  Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
 	  functions, such as regulators, RTC, codec, Coulomb counter, etc.
 	  This driver includes core APIs _only_. You have to select
-	  individul components like voltage regulators under corresponding
+	  individual components like voltage regulators under corresponding
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
@@ -1162,6 +1174,29 @@ config MFD_SI476X_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called si476x-core.
 
+config MFD_SIMPLE_MFD_I2C
+	tristate
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver creates a single register map with the intention for it
+	  to be shared by all sub-devices.
+
+	  Once the register map has been successfully initialised, any
+	  sub-devices represented by child nodes in Device Tree will be
+	  subsequently registered.
+
+config MFD_SL28CPLD
+	tristate "Kontron sl28cpld Board Management Controller"
+	depends on I2C
+	select MFD_SIMPLE_MFD_I2C
+	help
+	  Say yes here to enable support for the Kontron sl28cpld board
+	  management controller.
+
+	  It can be found on the following boards:
+		* SMARC-sAL28
+
 config MFD_SM501
 	tristate "Silicon Motion SM501"
 	depends on HAS_DMA
@@ -2118,5 +2153,18 @@ config SGI_MFD_IOC3
 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
 	  then say Y. Otherwise say N.
 
+config MFD_INTEL_M10_BMC
+	tristate "Intel MAX 10 Board Management Controller"
+	depends on SPI_MASTER
+	select REGMAP_SPI_AVMM
+	select MFD_CORE
+	help
+	  Support for the Intel MAX 10 board management controller using the
+	  SPI interface.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a60e5f835283..1780019d2474 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
+obj-$(CONFIG_MFD_ENE_KB3930)	+= ene-kb3930.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
 obj-$(CONFIG_MFD_GATEWORKS_GSC)	+= gateworks-gsc.o
 
@@ -264,3 +265,5 @@ obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
+obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 151c36ce7343..54fb6cbd2aa0 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/mfd/dm355evm_msp.h>
@@ -116,6 +117,54 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC),	/* mmc1 WP, nCD */
 };
 
+static struct gpio_led evm_leds[] = {
+	{ .name = "dm355evm::ds14",
+	  .default_trigger = "heartbeat", },
+	{ .name = "dm355evm::ds15",
+	  .default_trigger = "mmc0", },
+	{ .name = "dm355evm::ds16",
+	  /* could also be a CE-ATA drive */
+	  .default_trigger = "mmc1", },
+	{ .name = "dm355evm::ds17",
+	  .default_trigger = "nand-disk", },
+	{ .name = "dm355evm::ds18", },
+	{ .name = "dm355evm::ds19", },
+	{ .name = "dm355evm::ds20", },
+	{ .name = "dm355evm::ds21", },
+};
+
+static struct gpio_led_platform_data evm_led_data = {
+	.num_leds	= ARRAY_SIZE(evm_leds),
+	.leds		= evm_leds,
+};
+
+static struct gpiod_lookup_table evm_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/*
+		 * These GPIOs are on the dm355evm_msp
+		 * GPIO chip at index 0..7
+		 */
+		GPIO_LOOKUP_IDX("dm355evm_msp", 0, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 1, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 2, NULL,
+				2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 3, NULL,
+				3, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 4, NULL,
+				4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 5, NULL,
+				5, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 6, NULL,
+				6, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("dm355evm_msp", 7, NULL,
+				7, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
 #define MSP_GPIO_MASK(offset)	BIT(msp_gpios[(offset)] & 0x07)
 
@@ -260,32 +309,7 @@ static int add_children(struct i2c_client *client)
 
 	/* LED output */
 	if (msp_has_leds()) {
-#define GPIO_LED(l)	.name = l, .active_low = true
-		static struct gpio_led evm_leds[] = {
-			{ GPIO_LED("dm355evm::ds14"),
-				.default_trigger = "heartbeat", },
-			{ GPIO_LED("dm355evm::ds15"),
-				.default_trigger = "mmc0", },
-			{ GPIO_LED("dm355evm::ds16"),
-				/* could also be a CE-ATA drive */
-				.default_trigger = "mmc1", },
-			{ GPIO_LED("dm355evm::ds17"),
-				.default_trigger = "nand-disk", },
-			{ GPIO_LED("dm355evm::ds18"), },
-			{ GPIO_LED("dm355evm::ds19"), },
-			{ GPIO_LED("dm355evm::ds20"), },
-			{ GPIO_LED("dm355evm::ds21"), },
-		};
-#undef GPIO_LED
-
-		struct gpio_led_platform_data evm_led_data = {
-			.num_leds	= ARRAY_SIZE(evm_leds),
-			.leds		= evm_leds,
-		};
-
-		for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
-			evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
-
+		gpiod_add_lookup_table(&evm_leds_gpio_table);
 		/* NOTE:  these are the only fully programmable LEDs
 		 * on the board, since GPIO-61/ds22 (and many signals
 		 * going to DC7) must be used for AEMIF address lines
diff --git a/drivers/mfd/ene-kb3930.c b/drivers/mfd/ene-kb3930.c
new file mode 100644
index 000000000000..1c32ff586816
--- /dev/null
+++ b/drivers/mfd/ene-kb3930.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0-or-later
+/*
+ * ENE KB3930 Embedded Controller Driver
+ *
+ * Copyright (C) 2020 Lubomir Rintel
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* I2C registers that are multiplexing access to the EC RAM. */
+enum {
+	EC_DATA_IN	= 0x00,
+	EC_RAM_OUT	= 0x80,
+	EC_RAM_IN	= 0x81,
+};
+
+/* EC RAM registers. */
+enum {
+	EC_MODEL	= 0x30,
+	EC_VERSION_MAJ	= 0x31,
+	EC_VERSION_MIN	= 0x32,
+};
+
+struct kb3930 {
+	struct i2c_client *client;
+	struct regmap *ram_regmap;
+	struct gpio_descs *off_gpios;
+};
+
+struct kb3930 *kb3930_power_off;
+
+#define EC_GPIO_WAVE		0
+#define EC_GPIO_OFF_MODE	1
+
+#define EC_OFF_MODE_REBOOT	0
+#define EC_OFF_MODE_POWER	1
+
+static void kb3930_off(struct kb3930 *ddata, int off_mode)
+{
+	gpiod_direction_output(ddata->off_gpios->desc[EC_GPIO_OFF_MODE],
+			       off_mode);
+
+	/*
+	 * This creates a 10 Hz wave on EC_GPIO_WAVE that signals a
+	 * shutdown request to the EC. Once the EC detects it, it will
+	 * proceed to turn the power off or reset the board depending on
+	 * the value of EC_GPIO_OFF_MODE.
+	 */
+	while (1) {
+		mdelay(50);
+		gpiod_direction_output(ddata->off_gpios->desc[EC_GPIO_WAVE], 0);
+		mdelay(50);
+		gpiod_direction_output(ddata->off_gpios->desc[EC_GPIO_WAVE], 1);
+	}
+}
+
+static int kb3930_restart(struct notifier_block *this,
+			  unsigned long mode, void *cmd)
+{
+	kb3930_off(kb3930_power_off, EC_OFF_MODE_REBOOT);
+	return NOTIFY_DONE;
+}
+
+static void kb3930_pm_power_off(void)
+{
+	kb3930_off(kb3930_power_off, EC_OFF_MODE_POWER);
+}
+
+static struct notifier_block kb3930_restart_nb = {
+	.notifier_call = kb3930_restart,
+};
+
+static const struct mfd_cell ariel_ec_cells[] = {
+	{ .name = "dell-wyse-ariel-led", },
+	{ .name = "dell-wyse-ariel-power", },
+};
+
+static int kb3930_ec_ram_reg_write(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	struct kb3930 *ddata = context;
+
+	return i2c_smbus_write_word_data(ddata->client, EC_RAM_OUT,
+					 (val << 8) | reg);
+}
+
+static int kb3930_ec_ram_reg_read(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	struct kb3930 *ddata = context;
+	int ret;
+
+	ret = i2c_smbus_write_word_data(ddata->client, EC_RAM_IN, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_word_data(ddata->client, EC_DATA_IN);
+	if (ret < 0)
+		return ret;
+
+	*val = ret >> 8;
+	return 0;
+}
+
+static const struct regmap_config kb3930_ram_regmap_config = {
+	.name = "ec_ram",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_stride = 1,
+	.max_register = 0xff,
+	.reg_write = kb3930_ec_ram_reg_write,
+	.reg_read = kb3930_ec_ram_reg_read,
+	.fast_io = false,
+};
+
+static int kb3930_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct kb3930 *ddata;
+	unsigned int model;
+	int ret;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	kb3930_power_off = ddata;
+	ddata->client = client;
+	i2c_set_clientdata(client, ddata);
+
+	ddata->ram_regmap = devm_regmap_init(dev, NULL, ddata,
+					     &kb3930_ram_regmap_config);
+	if (IS_ERR(ddata->ram_regmap))
+		return PTR_ERR(ddata->ram_regmap);
+
+	ret = regmap_read(ddata->ram_regmap, EC_MODEL, &model);
+	if (ret < 0)
+		return ret;
+
+	/* Currently we only support the cells present on Dell Ariel model. */
+	if (model != 'J') {
+		dev_err(dev, "unknown board model: %02x\n", model);
+		return -ENODEV;
+	}
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
+				   ariel_ec_cells,
+				   ARRAY_SIZE(ariel_ec_cells),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	if (of_property_read_bool(np, "system-power-controller")) {
+		ddata->off_gpios =
+			devm_gpiod_get_array_optional(dev, "off", GPIOD_IN);
+		if (IS_ERR(ddata->off_gpios))
+			return PTR_ERR(ddata->off_gpios);
+		if (ddata->off_gpios->ndescs < 2) {
+			dev_err(dev, "invalid off-gpios property\n");
+			return -EINVAL;
+		}
+	}
+
+	if (ddata->off_gpios) {
+		register_restart_handler(&kb3930_restart_nb);
+		if (!pm_power_off)
+			pm_power_off = kb3930_pm_power_off;
+	}
+
+	return 0;
+}
+
+static int kb3930_remove(struct i2c_client *client)
+{
+	struct kb3930 *ddata = i2c_get_clientdata(client);
+
+	if (ddata->off_gpios) {
+		if (pm_power_off == kb3930_pm_power_off)
+			pm_power_off = NULL;
+		unregister_restart_handler(&kb3930_restart_nb);
+	}
+	kb3930_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id kb3930_dt_ids[] = {
+	{ .compatible = "ene,kb3930" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kb3930_dt_ids);
+
+static struct i2c_driver kb3930_driver = {
+	.probe_new = kb3930_probe,
+	.remove = kb3930_remove,
+	.driver = {
+		.name = "ene-kb3930",
+		.of_match_table = of_match_ptr(kb3930_dt_ids),
+	},
+};
+module_i2c_driver(kb3930_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("ENE KB3930 Embedded Controller Driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 9a58032f818a..2d7c588ef1ed 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -293,6 +293,10 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x5ac4), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x5ac6), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x5aee), (kernel_ulong_t)&bxt_uart_info },
+	/* LKF */
+	{ PCI_VDEVICE(INTEL, 0x98a8), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x98a9), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x98c7), (kernel_ulong_t)&bxt_uart_info },
 	/* SPT-LP */
 	{ PCI_VDEVICE(INTEL, 0x9d27), (kernel_ulong_t)&spt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x9d28), (kernel_ulong_t)&spt_uart_info },
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
new file mode 100644
index 000000000000..b84579b7b4f0
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MAX 10 Board Management Controller chip
+ *
+ * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+enum m10bmc_type {
+	M10_N3000,
+};
+
+static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
+	{ .name = "n3000bmc-hwmon" },
+	{ .name = "n3000bmc-retimer" },
+	{ .name = "n3000bmc-secure" },
+};
+
+static struct regmap_config intel_m10bmc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = M10BMC_MEM_END,
+};
+
+static ssize_t bmc_version_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmc_version);
+
+static ssize_t bmcfw_version_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmcfw_version);
+
+static struct attribute *m10bmc_attrs[] = {
+	&dev_attr_bmc_version.attr,
+	&dev_attr_bmcfw_version.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(m10bmc);
+
+static int check_m10bmc_version(struct intel_m10bmc *ddata)
+{
+	unsigned int v;
+	int ret;
+
+	/*
+	 * This check is to filter out the very old legacy BMC versions,
+	 * M10BMC_LEGACY_SYS_BASE is the offset to this old block of mmio
+	 * registers. In the old BMC chips, the BMC version info is stored
+	 * in this old version register (M10BMC_LEGACY_SYS_BASE +
+	 * M10BMC_BUILD_VER), so its read out value would have not been
+	 * LEGACY_INVALID (0xffffffff). But in new BMC chips that the
+	 * driver supports, the value of this register should be
+	 * LEGACY_INVALID.
+	 */
+	ret = m10bmc_raw_read(ddata,
+			      M10BMC_LEGACY_SYS_BASE + M10BMC_BUILD_VER, &v);
+	if (ret)
+		return -ENODEV;
+
+	if (v != M10BMC_VER_LEGACY_INVALID) {
+		dev_err(ddata->dev, "bad version M10BMC detected\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int intel_m10_bmc_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct device *dev = &spi->dev;
+	struct mfd_cell *cells;
+	struct intel_m10bmc *ddata;
+	int ret, n_cell;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->dev = dev;
+
+	ddata->regmap =
+		devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
+	if (IS_ERR(ddata->regmap)) {
+		ret = PTR_ERR(ddata->regmap);
+		dev_err(dev, "Failed to allocate regmap: %d\n", ret);
+		return ret;
+	}
+
+	spi_set_drvdata(spi, ddata);
+
+	ret = check_m10bmc_version(ddata);
+	if (ret) {
+		dev_err(dev, "Failed to identify m10bmc hardware\n");
+		return ret;
+	}
+
+	switch (id->driver_data) {
+	case M10_N3000:
+		cells = m10bmc_pacn3000_subdevs;
+		n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(dev, "Failed to register sub-devices: %d\n", ret);
+
+	return ret;
+}
+
+static const struct spi_device_id m10bmc_spi_id[] = {
+	{ "m10-n3000", M10_N3000 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
+
+static struct spi_driver intel_m10bmc_spi_driver = {
+	.driver = {
+		.name = "intel-m10-bmc",
+		.dev_groups = m10bmc_groups,
+	},
+	.probe = intel_m10_bmc_spi_probe,
+	.id_table = m10bmc_spi_id,
+};
+module_spi_driver(intel_m10bmc_spi_driver);
+
+MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:intel-m10-bmc");
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 52bec01149e5..2c9295953c11 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -13,6 +13,7 @@
 #include <linux/dmi.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/acpi.h>
 
 #define MAX_ID_LEN 4
 static char force_device_id[MAX_ID_LEN + 1] = "";
@@ -124,6 +125,7 @@ static const struct kempld_platform_data kempld_platform_data_generic = {
 };
 
 static struct platform_device *kempld_pdev;
+static bool kempld_acpi_mode;
 
 static int kempld_create_platform_device(const struct dmi_system_id *id)
 {
@@ -426,13 +428,93 @@ static int kempld_detect_device(struct kempld_device_data *pld)
 	return ret;
 }
 
+#ifdef CONFIG_ACPI
+static int kempld_get_acpi_data(struct platform_device *pdev)
+{
+	struct list_head resource_list;
+	struct resource *resources;
+	struct resource_entry *rentry;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *acpi_dev = ACPI_COMPANION(dev);
+	const struct kempld_platform_data *pdata;
+	int ret;
+	int count;
+
+	pdata = acpi_device_get_match_data(dev);
+	ret = platform_device_add_data(pdev, pdata,
+				       sizeof(struct kempld_platform_data));
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL);
+	if (ret < 0)
+		goto out;
+
+	count = ret;
+
+	if (count == 0) {
+		ret = platform_device_add_resources(pdev, pdata->ioresource, 1);
+		goto out;
+	}
+
+	resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources),
+				 GFP_KERNEL);
+	if (!resources) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	count = 0;
+	list_for_each_entry(rentry, &resource_list, node) {
+		memcpy(&resources[count], rentry->res,
+		       sizeof(*resources));
+		count++;
+	}
+	ret = platform_device_add_resources(pdev, resources, count);
+
+out:
+	acpi_dev_free_resource_list(&resource_list);
+
+	return ret;
+}
+#else
+static int kempld_get_acpi_data(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_ACPI */
+
 static int kempld_probe(struct platform_device *pdev)
 {
-	const struct kempld_platform_data *pdata =
-		dev_get_platdata(&pdev->dev);
+	const struct kempld_platform_data *pdata;
 	struct device *dev = &pdev->dev;
 	struct kempld_device_data *pld;
 	struct resource *ioport;
+	int ret;
+
+	if (kempld_pdev == NULL) {
+		/*
+		 * No kempld_pdev device has been registered in kempld_init,
+		 * so we seem to be probing an ACPI platform device.
+		 */
+		ret = kempld_get_acpi_data(pdev);
+		if (ret)
+			return ret;
+
+		kempld_acpi_mode = true;
+	} else if (kempld_pdev != pdev) {
+		/*
+		 * The platform device we are probing is not the one we
+		 * registered in kempld_init using the DMI table, so this one
+		 * comes from ACPI.
+		 * As we can only probe one - abort here and use the DMI
+		 * based one instead.
+		 */
+		dev_notice(dev, "platform device exists - not using ACPI\n");
+		return -ENODEV;
+	}
+	pdata = dev_get_platdata(dev);
 
 	pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL);
 	if (!pld)
@@ -471,9 +553,19 @@ static int kempld_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id kempld_acpi_table[] = {
+	{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, kempld_acpi_table);
+#endif
+
 static struct platform_driver kempld_driver = {
 	.driver		= {
 		.name	= "kempld",
+		.acpi_match_table = ACPI_PTR(kempld_acpi_table),
+		.probe_type = PROBE_FORCE_SYNCHRONOUS,
 	},
 	.probe		= kempld_probe,
 	.remove		= kempld_remove,
@@ -792,6 +884,7 @@ MODULE_DEVICE_TABLE(dmi, kempld_dmi_table);
 static int __init kempld_init(void)
 {
 	const struct dmi_system_id *id;
+	int ret;
 
 	if (force_device_id[0]) {
 		for (id = kempld_dmi_table;
@@ -801,12 +894,24 @@ static int __init kempld_init(void)
 					break;
 		if (id->matches[0].slot == DMI_NONE)
 			return -ENODEV;
-	} else {
-		if (!dmi_check_system(kempld_dmi_table))
-			return -ENODEV;
 	}
 
-	return platform_driver_register(&kempld_driver);
+	ret = platform_driver_register(&kempld_driver);
+	if (ret)
+		return ret;
+
+	/*
+	 * With synchronous probing the device should already be probed now.
+	 * If no device id is forced and also no ACPI definition for the
+	 * device was found, scan DMI table as fallback.
+	 *
+	 * If drivers_autoprobing is disabled and the device is found here,
+	 * only that device can be bound manually later.
+	 */
+	if (!kempld_pdev && !kempld_acpi_mode)
+		dmi_check_system(kempld_dmi_table);
+
+	return 0;
 }
 
 static void __exit kempld_exit(void)
diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c
index 44d5bb462dab..f3d418810693 100644
--- a/drivers/mfd/khadas-mcu.c
+++ b/drivers/mfd/khadas-mcu.c
@@ -122,11 +122,13 @@ static int khadas_mcu_probe(struct i2c_client *client,
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id khadas_mcu_of_match[] = {
 	{ .compatible = "khadas,mcu", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, khadas_mcu_of_match);
+#endif
 
 static struct i2c_driver khadas_mcu_driver = {
 	.driver = {
diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c
index 2268be9113f1..9c21483d9653 100644
--- a/drivers/mfd/lp87565.c
+++ b/drivers/mfd/lp87565.c
@@ -27,6 +27,10 @@ static const struct mfd_cell lp87565_cells[] = {
 static const struct of_device_id of_lp87565_match_table[] = {
 	{ .compatible = "ti,lp87565", },
 	{
+		.compatible = "ti,lp87524-q1",
+		.data = (void *)LP87565_DEVICE_TYPE_LP87524_Q1,
+	},
+	{
 		.compatible = "ti,lp87565-q1",
 		.data = (void *)LP87565_DEVICE_TYPE_LP87565_Q1,
 	},
diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 8a8d733fdce5..4ed6ad8ce002 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -369,19 +369,14 @@ EXPORT_SYMBOL_GPL(madera_of_match);
 static int madera_get_reset_gpio(struct madera *madera)
 {
 	struct gpio_desc *reset;
-	int ret;
 
 	if (madera->pdata.reset)
 		return 0;
 
 	reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(reset)) {
-		ret = PTR_ERR(reset);
-		if (ret != -EPROBE_DEFER)
-			dev_err(madera->dev, "Failed to request /RESET: %d\n",
-				ret);
-		return ret;
-	}
+	if (IS_ERR(reset))
+		return dev_err_probe(madera->dev, PTR_ERR(reset),
+				"Failed to request /RESET");
 
 	/*
 	 * A hard reset is needed for full reset of the chip. We allow running
diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
index e9cacc27d980..4661c1b29a72 100644
--- a/drivers/mfd/mt6360-core.c
+++ b/drivers/mfd/mt6360-core.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/version.h>
 
 #include <linux/mfd/mt6360.h>
 
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index e25407ed3ad4..dc452df1f1bf 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -25,6 +25,7 @@ static const struct mfd_cell rn5t618_cells[] = {
 
 static const struct mfd_cell rc5t619_cells[] = {
 	{ .name = "rn5t618-adc" },
+	{ .name = "rn5t618-power" },
 	{ .name = "rn5t618-regulator" },
 	{ .name = "rc5t619-rtc" },
 	{ .name = "rn5t618-wdt" },
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
new file mode 100644
index 000000000000..87f684cff9a1
--- /dev/null
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Simple MFD - I2C
+ *
+ * This driver creates a single register map with the intention for it to be
+ * shared by all sub-devices.  Children can use their parent's device structure
+ * (dev.parent) in order to reference it.
+ *
+ * Once the register map has been successfully initialised, any sub-devices
+ * represented by child nodes in Device Tree will be subsequently registered.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config simple_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int simple_mfd_i2c_probe(struct i2c_client *i2c)
+{
+	const struct regmap_config *config;
+	struct regmap *regmap;
+
+	config = device_get_match_data(&i2c->dev);
+	if (!config)
+		config = &simple_regmap_config;
+
+	regmap = devm_regmap_init_i2c(i2c, config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return devm_of_platform_populate(&i2c->dev);
+}
+
+static const struct of_device_id simple_mfd_i2c_of_match[] = {
+	{ .compatible = "kontron,sl28cpld" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
+
+static struct i2c_driver simple_mfd_i2c_driver = {
+	.probe_new = simple_mfd_i2c_probe,
+	.driver = {
+		.name = "simple-mfd-i2c",
+		.of_match_table = simple_mfd_i2c_of_match,
+	},
+};
+module_i2c_driver(simple_mfd_i2c_driver);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("Simple MFD - I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index ccd62b963952..6d2f4a0a901d 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1415,8 +1415,14 @@ static int sm501_plat_probe(struct platform_device *dev)
 		goto err_claim;
 	}
 
-	return sm501_init_dev(sm);
+	ret = sm501_init_dev(sm);
+	if (ret)
+		goto err_unmap;
+
+	return 0;
 
+ err_unmap:
+	iounmap(sm->regs);
  err_claim:
 	release_mem_region(sm->io_res->start, 0x100);
  err_res:
diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c
index f8a8b918c60d..6b7956604a0f 100644
--- a/drivers/mfd/sprd-sc27xx-spi.c
+++ b/drivers/mfd/sprd-sc27xx-spi.c
@@ -189,7 +189,7 @@ static int sprd_pmic_probe(struct spi_device *spi)
 		ddata->irqs[i].mask = BIT(i);
 
 	ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
-				       IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
+				       IRQF_ONESHOT, 0,
 				       &ddata->irq_chip, &ddata->irq_data);
 	if (ret) {
 		dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
@@ -202,9 +202,34 @@ static int sprd_pmic_probe(struct spi_device *spi)
 		return ret;
 	}
 
+	device_init_wakeup(&spi->dev, true);
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int sprd_pmic_suspend(struct device *dev)
+{
+	struct sprd_pmic *ddata = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(ddata->irq);
+
+	return 0;
+}
+
+static int sprd_pmic_resume(struct device *dev)
+{
+	struct sprd_pmic *ddata = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ddata->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
+
 static const struct of_device_id sprd_pmic_match[] = {
 	{ .compatible = "sprd,sc2731", .data = &sc2731_data },
 	{},
@@ -215,6 +240,7 @@ static struct spi_driver sprd_pmic_driver = {
 	.driver = {
 		.name = "sc27xx-pmic",
 		.of_match_table = sprd_pmic_match,
+		.pm = &sprd_pmic_pm_ops,
 	},
 	.probe = sprd_pmic_probe,
 };
diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c
index 711979afd90a..5e680bfdf5c9 100644
--- a/drivers/mfd/stmfx.c
+++ b/drivers/mfd/stmfx.c
@@ -331,11 +331,9 @@ static int stmfx_chip_init(struct i2c_client *client)
 	ret = PTR_ERR_OR_ZERO(stmfx->vdd);
 	if (ret == -ENODEV) {
 		stmfx->vdd = NULL;
-	} else if (ret == -EPROBE_DEFER) {
-		return ret;
-	} else if (ret) {
-		dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret);
-		return ret;
+	} else {
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to get VDD regulator\n");
 	}
 
 	if (stmfx->vdd) {
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index df5cebb372a5..ca465794ea9c 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -108,7 +108,6 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 	syscon_config.max_register = resource_size(&res) - reg_io_width;
 
 	regmap = regmap_init_mmio(NULL, base, &syscon_config);
-	kfree(syscon_config.name);
 	if (IS_ERR(regmap)) {
 		pr_err("regmap init failed\n");
 		ret = PTR_ERR(regmap);
@@ -145,6 +144,7 @@ err_clk:
 	regmap_exit(regmap);
 err_regmap:
 	iounmap(base);
+	kfree(syscon_config.name);
 err_map:
 	kfree(syscon);
 	return ERR_PTR(ret);
diff --git a/drivers/mfd/wcd934x.c b/drivers/mfd/wcd934x.c
index da910302d51a..c274d733b656 100644
--- a/drivers/mfd/wcd934x.c
+++ b/drivers/mfd/wcd934x.c
@@ -219,12 +219,9 @@ static int wcd934x_slim_probe(struct slim_device *sdev)
 		return	-ENOMEM;
 
 	ddata->irq = of_irq_get(np, 0);
-	if (ddata->irq < 0) {
-		if (ddata->irq != -EPROBE_DEFER)
-			dev_err(ddata->dev, "Failed to get IRQ: err = %d\n",
-				ddata->irq);
-		return ddata->irq;
-	}
+	if (ddata->irq < 0)
+		return dev_err_probe(ddata->dev, ddata->irq,
+				     "Failed to get IRQ\n");
 
 	reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
 	if (reset_gpio < 0) {
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 7dbcf6973d33..78ddc127e45e 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -428,6 +428,16 @@ config PWM_SIFIVE
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-sifive.
 
+config PWM_SL28CPLD
+	tristate "Kontron sl28cpld PWM support"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	help
+	  Generic PWM framework driver for board management controller
+	  found on the Kontron sl28 CPLD.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sl28cpld.
+
 config PWM_SPEAR
 	tristate "STMicroelectronics SPEAr PWM support"
 	depends on PLAT_SPEAR || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 2c2ba0a03557..cbdcd55d69ee 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
+obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
 obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
 obj-$(CONFIG_PWM_SPRD)		+= pwm-sprd.o
 obj-$(CONFIG_PWM_STI)		+= pwm-sti.o
diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c
new file mode 100644
index 000000000000..5046b6b7fd35
--- /dev/null
+++ b/drivers/pwm/pwm-sl28cpld.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld PWM driver
+ *
+ * Copyright (c) 2020 Michael Walle <michael@walle.cc>
+ *
+ * There is no public datasheet available for this PWM core. But it is easy
+ * enough to be briefly explained. It consists of one 8-bit counter. The PWM
+ * supports four distinct frequencies by selecting when to reset the counter.
+ * With the prescaler setting you can select which bit of the counter is used
+ * to reset it. This implies that the higher the frequency the less remaining
+ * bits are available for the actual counter.
+ *
+ * Let cnt[7:0] be the counter, clocked at 32kHz:
+ * +-----------+--------+--------------+-----------+---------------+
+ * | prescaler |  reset | counter bits | frequency | period length |
+ * +-----------+--------+--------------+-----------+---------------+
+ * |         0 | cnt[7] |     cnt[6:0] |    250 Hz |    4000000 ns |
+ * |         1 | cnt[6] |     cnt[5:0] |    500 Hz |    2000000 ns |
+ * |         2 | cnt[5] |     cnt[4:0] |     1 kHz |    1000000 ns |
+ * |         3 | cnt[4] |     cnt[3:0] |     2 kHz |     500000 ns |
+ * +-----------+--------+--------------+-----------+---------------+
+ *
+ * Limitations:
+ * - The hardware cannot generate a 100% duty cycle if the prescaler is 0.
+ * - The hardware cannot atomically set the prescaler and the counter value,
+ *   which might lead to glitches and inconsistent states if a write fails.
+ * - The counter is not reset if you switch the prescaler which leads
+ *   to glitches, too.
+ * - The duty cycle will switch immediately and not after a complete cycle.
+ * - Depending on the actual implementation, disabling the PWM might have
+ *   side effects. For example, if the output pin is shared with a GPIO pin
+ *   it will automatically switch back to GPIO mode.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+/*
+ * PWM timer block registers.
+ */
+#define SL28CPLD_PWM_CTRL			0x00
+#define   SL28CPLD_PWM_CTRL_ENABLE		BIT(7)
+#define   SL28CPLD_PWM_CTRL_PRESCALER_MASK	GENMASK(1, 0)
+#define SL28CPLD_PWM_CYCLE			0x01
+#define   SL28CPLD_PWM_CYCLE_MAX		GENMASK(6, 0)
+
+#define SL28CPLD_PWM_CLK			32000 /* 32 kHz */
+#define SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler)	(1 << (7 - (prescaler)))
+#define SL28CPLD_PWM_PERIOD(prescaler) \
+	(NSEC_PER_SEC / SL28CPLD_PWM_CLK * SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler))
+
+/*
+ * We calculate the duty cycle like this:
+ *   duty_cycle_ns = pwm_cycle_reg * max_period_ns / max_duty_cycle
+ *
+ * With
+ *   max_period_ns = 1 << (7 - prescaler) / SL28CPLD_PWM_CLK * NSEC_PER_SEC
+ *   max_duty_cycle = 1 << (7 - prescaler)
+ * this then simplifies to:
+ *   duty_cycle_ns = pwm_cycle_reg / SL28CPLD_PWM_CLK * NSEC_PER_SEC
+ *                 = NSEC_PER_SEC / SL28CPLD_PWM_CLK * pwm_cycle_reg
+ *
+ * NSEC_PER_SEC is a multiple of SL28CPLD_PWM_CLK, therefore we're not losing
+ * precision by doing the divison first.
+ */
+#define SL28CPLD_PWM_TO_DUTY_CYCLE(reg) \
+	(NSEC_PER_SEC / SL28CPLD_PWM_CLK * (reg))
+#define SL28CPLD_PWM_FROM_DUTY_CYCLE(duty_cycle) \
+	(DIV_ROUND_DOWN_ULL((duty_cycle), NSEC_PER_SEC / SL28CPLD_PWM_CLK))
+
+#define sl28cpld_pwm_read(priv, reg, val) \
+	regmap_read((priv)->regmap, (priv)->offset + (reg), (val))
+#define sl28cpld_pwm_write(priv, reg, val) \
+	regmap_write((priv)->regmap, (priv)->offset + (reg), (val))
+
+struct sl28cpld_pwm {
+	struct pwm_chip pwm_chip;
+	struct regmap *regmap;
+	u32 offset;
+};
+
+static void sl28cpld_pwm_get_state(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   struct pwm_state *state)
+{
+	struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev);
+	unsigned int reg;
+	int prescaler;
+
+	sl28cpld_pwm_read(priv, SL28CPLD_PWM_CTRL, &reg);
+
+	state->enabled = reg & SL28CPLD_PWM_CTRL_ENABLE;
+
+	prescaler = FIELD_GET(SL28CPLD_PWM_CTRL_PRESCALER_MASK, reg);
+	state->period = SL28CPLD_PWM_PERIOD(prescaler);
+
+	sl28cpld_pwm_read(priv, SL28CPLD_PWM_CYCLE, &reg);
+	state->duty_cycle = SL28CPLD_PWM_TO_DUTY_CYCLE(reg);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	/*
+	 * Sanitize values for the PWM core. Depending on the prescaler it
+	 * might happen that we calculate a duty_cycle greater than the actual
+	 * period. This might happen if someone (e.g. the bootloader) sets an
+	 * invalid combination of values. The behavior of the hardware is
+	 * undefined in this case. But we need to report sane values back to
+	 * the PWM core.
+	 */
+	state->duty_cycle = min(state->duty_cycle, state->period);
+}
+
+static int sl28cpld_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct sl28cpld_pwm *priv = dev_get_drvdata(chip->dev);
+	unsigned int cycle, prescaler;
+	bool write_duty_cycle_first;
+	int ret;
+	u8 ctrl;
+
+	/* Polarity inversion is not supported */
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	/*
+	 * Calculate the prescaler. Pick the biggest period that isn't
+	 * bigger than the requested period.
+	 */
+	prescaler = DIV_ROUND_UP_ULL(SL28CPLD_PWM_PERIOD(0), state->period);
+	prescaler = order_base_2(prescaler);
+
+	if (prescaler > field_max(SL28CPLD_PWM_CTRL_PRESCALER_MASK))
+		return -ERANGE;
+
+	ctrl = FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, prescaler);
+	if (state->enabled)
+		ctrl |= SL28CPLD_PWM_CTRL_ENABLE;
+
+	cycle = SL28CPLD_PWM_FROM_DUTY_CYCLE(state->duty_cycle);
+	cycle = min_t(unsigned int, cycle, SL28CPLD_PWM_MAX_DUTY_CYCLE(prescaler));
+
+	/*
+	 * Work around the hardware limitation. See also above. Trap 100% duty
+	 * cycle if the prescaler is 0. Set prescaler to 1 instead. We don't
+	 * care about the frequency because its "all-one" in either case.
+	 *
+	 * We don't need to check the actual prescaler setting, because only
+	 * if the prescaler is 0 we can have this particular value.
+	 */
+	if (cycle == SL28CPLD_PWM_MAX_DUTY_CYCLE(0)) {
+		ctrl &= ~SL28CPLD_PWM_CTRL_PRESCALER_MASK;
+		ctrl |= FIELD_PREP(SL28CPLD_PWM_CTRL_PRESCALER_MASK, 1);
+		cycle = SL28CPLD_PWM_MAX_DUTY_CYCLE(1);
+	}
+
+	/*
+	 * To avoid glitches when we switch the prescaler, we have to make sure
+	 * we have a valid duty cycle for the new mode.
+	 *
+	 * Take the current prescaler (or the current period length) into
+	 * account to decide whether we have to write the duty cycle or the new
+	 * prescaler first. If the period length is decreasing we have to
+	 * write the duty cycle first.
+	 */
+	write_duty_cycle_first = pwm->state.period > state->period;
+
+	if (write_duty_cycle_first) {
+		ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle);
+		if (ret)
+			return ret;
+	}
+
+	ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CTRL, ctrl);
+	if (ret)
+		return ret;
+
+	if (!write_duty_cycle_first) {
+		ret = sl28cpld_pwm_write(priv, SL28CPLD_PWM_CYCLE, cycle);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops sl28cpld_pwm_ops = {
+	.apply = sl28cpld_pwm_apply,
+	.get_state = sl28cpld_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int sl28cpld_pwm_probe(struct platform_device *pdev)
+{
+	struct sl28cpld_pwm *priv;
+	struct pwm_chip *chip;
+	int ret;
+
+	if (!pdev->dev.parent) {
+		dev_err(&pdev->dev, "no parent device\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap) {
+		dev_err(&pdev->dev, "could not get parent regmap\n");
+		return -ENODEV;
+	}
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &priv->offset);
+	if (ret) {
+		dev_err(&pdev->dev, "no 'reg' property found (%pe)\n",
+			ERR_PTR(ret));
+		return -EINVAL;
+	}
+
+	/* Initialize the pwm_chip structure */
+	chip = &priv->pwm_chip;
+	chip->dev = &pdev->dev;
+	chip->ops = &sl28cpld_pwm_ops;
+	chip->base = -1;
+	chip->npwm = 1;
+
+	ret = pwmchip_add(&priv->pwm_chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add PWM chip (%pe)",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int sl28cpld_pwm_remove(struct platform_device *pdev)
+{
+	struct sl28cpld_pwm *priv = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&priv->pwm_chip);
+}
+
+static const struct of_device_id sl28cpld_pwm_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-pwm" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_pwm_of_match);
+
+static struct platform_driver sl28cpld_pwm_driver = {
+	.probe = sl28cpld_pwm_probe,
+	.remove	= sl28cpld_pwm_remove,
+	.driver = {
+		.name = "sl28cpld-pwm",
+		.of_match_table = sl28cpld_pwm_of_match,
+	},
+};
+module_platform_driver(sl28cpld_pwm_driver);
+
+MODULE_DESCRIPTION("sl28cpld PWM Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ab7aad5a1e69..ba698340ed6f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -340,6 +340,17 @@ config MLX_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called mlx-wdt.
 
+config SL28CPLD_WATCHDOG
+	tristate "Kontron sl28cpld Watchdog"
+	depends on MFD_SL28CPLD || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  on the Kontron sl28 CPLD.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sl28cpld_wdt.
+
 # ALPHA Architecture
 
 # ARM Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 97bed1d3d97c..aa6e41126901 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -225,3 +225,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
 obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
 obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
 obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
+obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
new file mode 100644
index 000000000000..a45047d8d9ab
--- /dev/null
+++ b/drivers/watchdog/sl28cpld_wdt.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld watchdog driver
+ *
+ * Copyright 2020 Kontron Europe GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+/*
+ * Watchdog timer block registers.
+ */
+#define WDT_CTRL			0x00
+#define  WDT_CTRL_EN			BIT(0)
+#define  WDT_CTRL_LOCK			BIT(2)
+#define  WDT_CTRL_ASSERT_SYS_RESET	BIT(6)
+#define  WDT_CTRL_ASSERT_WDT_TIMEOUT	BIT(7)
+#define WDT_TIMEOUT			0x01
+#define WDT_KICK			0x02
+#define  WDT_KICK_VALUE			0x6b
+#define WDT_COUNT			0x03
+
+#define WDT_DEFAULT_TIMEOUT		10
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
+
+struct sl28cpld_wdt {
+	struct watchdog_device wdd;
+	struct regmap *regmap;
+	u32 offset;
+	bool assert_wdt_timeout;
+};
+
+static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
+{
+	struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	return regmap_write(wdt->regmap, wdt->offset + WDT_KICK,
+			    WDT_KICK_VALUE);
+}
+
+static int sl28cpld_wdt_start(struct watchdog_device *wdd)
+{
+	struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+	unsigned int val;
+
+	val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET;
+	if (wdt->assert_wdt_timeout)
+		val |= WDT_CTRL_ASSERT_WDT_TIMEOUT;
+	if (nowayout)
+		val |= WDT_CTRL_LOCK;
+
+	return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
+				  val, val);
+}
+
+static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
+{
+	struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
+				  WDT_CTRL_EN, 0);
+}
+
+static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val);
+	if (ret)
+		return 0;
+
+	return val;
+}
+
+static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
+				    unsigned int timeout)
+{
+	struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout);
+	if (ret)
+		return ret;
+
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info sl28cpld_wdt_info = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "sl28cpld watchdog",
+};
+
+static struct watchdog_ops sl28cpld_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = sl28cpld_wdt_start,
+	.stop = sl28cpld_wdt_stop,
+	.ping = sl28cpld_wdt_ping,
+	.set_timeout = sl28cpld_wdt_set_timeout,
+	.get_timeleft = sl28cpld_wdt_get_timeleft,
+};
+
+static int sl28cpld_wdt_probe(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd;
+	struct sl28cpld_wdt *wdt;
+	unsigned int status;
+	unsigned int val;
+	int ret;
+
+	if (!pdev->dev.parent)
+		return -ENODEV;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!wdt->regmap)
+		return -ENODEV;
+
+	ret = device_property_read_u32(&pdev->dev, "reg", &wdt->offset);
+	if (ret)
+		return -EINVAL;
+
+	wdt->assert_wdt_timeout = device_property_read_bool(&pdev->dev,
+							    "kontron,assert-wdt-timeout-pin");
+
+	/* initialize struct watchdog_device */
+	wdd = &wdt->wdd;
+	wdd->parent = &pdev->dev;
+	wdd->info = &sl28cpld_wdt_info;
+	wdd->ops = &sl28cpld_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_timeout = 255;
+
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_stop_on_reboot(wdd);
+
+	/*
+	 * Read the status early, in case of an error, we haven't modified the
+	 * hardware.
+	 */
+	ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initial timeout value, may be overwritten by device tree or module
+	 * parmeter in watchdog_init_timeout().
+	 *
+	 * Reading a zero here means that either the hardware has a default
+	 * value of zero (which is very unlikely and definitely a hardware
+	 * bug) or the bootloader set it to zero. In any case, we handle
+	 * this case gracefully and set out own timeout.
+	 */
+	ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT, &val);
+	if (ret)
+		return ret;
+
+	if (val)
+		wdd->timeout = val;
+	else
+		wdd->timeout = WDT_DEFAULT_TIMEOUT;
+
+	watchdog_init_timeout(wdd, timeout, &pdev->dev);
+	sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
+
+	/* if the watchdog is locked, we set nowayout */
+	if (status & WDT_CTRL_LOCK)
+		nowayout = true;
+	watchdog_set_nowayout(wdd, nowayout);
+
+	/*
+	 * If watchdog is already running, keep it enabled, but make
+	 * sure its mode is set correctly.
+	 */
+	if (status & WDT_CTRL_EN) {
+		sl28cpld_wdt_start(wdd);
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, wdd);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "initial timeout %d sec%s\n",
+		 wdd->timeout, nowayout ? ", nowayout" : "");
+
+	return 0;
+}
+
+static const struct of_device_id sl28cpld_wdt_of_match[] = {
+	{ .compatible = "kontron,sl28cpld-wdt" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match);
+
+static struct platform_driver sl28cpld_wdt_driver = {
+	.probe = sl28cpld_wdt_probe,
+	.driver = {
+		.name = "sl28cpld-wdt",
+		.of_match_table = sl28cpld_wdt_of_match,
+	},
+};
+module_platform_driver(sl28cpld_wdt_driver);
+
+MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
new file mode 100644
index 000000000000..c8ef2f1654a4
--- /dev/null
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Intel MAX 10 Board Management Controller chip.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation, Inc.
+ */
+#ifndef __MFD_INTEL_M10_BMC_H
+#define __MFD_INTEL_M10_BMC_H
+
+#include <linux/regmap.h>
+
+#define M10BMC_LEGACY_SYS_BASE		0x300400
+#define M10BMC_SYS_BASE			0x300800
+#define M10BMC_MEM_END			0x200000fc
+
+/* Register offset of system registers */
+#define NIOS2_FW_VERSION		0x0
+#define M10BMC_TEST_REG			0x3c
+#define M10BMC_BUILD_VER		0x68
+#define M10BMC_VER_MAJOR_MSK		GENMASK(23, 16)
+#define M10BMC_VER_PCB_INFO_MSK		GENMASK(31, 24)
+#define M10BMC_VER_LEGACY_INVALID	0xffffffff
+
+/**
+ * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
+ * @dev: this device
+ * @regmap: the regmap used to access registers by m10bmc itself
+ */
+struct intel_m10bmc {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+/*
+ * register access helper functions.
+ *
+ * m10bmc_raw_read - read m10bmc register per addr
+ * m10bmc_sys_read - read m10bmc system register per offset
+ */
+static inline int
+m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
+		unsigned int *val)
+{
+	int ret;
+
+	ret = regmap_read(m10bmc->regmap, addr, val);
+	if (ret)
+		dev_err(m10bmc->dev, "fail to read raw reg %x: %d\n",
+			addr, ret);
+
+	return ret;
+}
+
+/*
+ * The base of the system registers could be configured by HW developers, and
+ * in HW SPEC, the base is not added to the addresses of the system registers.
+ *
+ * This macro helps to simplify the accessing of the system registers. And if
+ * the base is reconfigured in HW, SW developers could simply change the
+ * M10BMC_SYS_BASE accordingly.
+ */
+#define m10bmc_sys_read(m10bmc, offset, val) \
+	m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
+
+#endif /* __MFD_INTEL_M10_BMC_H */
diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h
index 43716aca46fa..d44ddfb6bb63 100644
--- a/include/linux/mfd/lp87565.h
+++ b/include/linux/mfd/lp87565.h
@@ -14,6 +14,7 @@
 
 enum lp87565_device_type {
 	LP87565_DEVICE_TYPE_UNKNOWN	= 0,
+	LP87565_DEVICE_TYPE_LP87524_Q1,
 	LP87565_DEVICE_TYPE_LP87561_Q1,
 	LP87565_DEVICE_TYPE_LP87565_Q1,
 };
author	Linus Torvalds <torvalds@linux-foundation.org>	2020-10-14 15:56:58 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2020-10-14 15:56:58 -0700
commit	1a31c12371556bfbe511edd268dab721b504d511 (patch)
tree	862c9a1cf5fb3a95422c4f3db9650e84cd04b635
parent	f888bdf9823c85fe945c4eb3ba353f749dec3856 (diff)
parent	6d81dc3c79d46b66b29712eb1ac5ad2cbe4231d2 (diff)
download	linux-1a31c12371556bfbe511edd268dab721b504d511.tar.gz