From 9f607a309fbe95fc1f77acce5af70766a7142537 Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Sat, 10 Jul 2021 02:13:12 -0700 Subject: usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Some devices have USB compositions which may require multiple endpoints that support EP bursting. HW defined TX FIFO sizes may not always be sufficient for these compositions. By utilizing flexible TX FIFO allocation, this allows for endpoints to request the required FIFO depth to achieve higher bandwidth. With some higher bMaxBurst configurations, using a larger TX FIFO size results in better TX throughput. By introducing the check_config() callback, the resizing logic can fetch the maximum number of endpoints used in the USB composition (can contain multiple configurations), which helps ensure that the resizing logic can fulfill the configuration(s), or return an error to the gadget layer otherwise during bind time. Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/1625908395-5498-4-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/usb/dwc3/core.h') diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index dccdf13b5f9e..735e9be2a8df 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1023,6 +1023,7 @@ struct dwc3_scratchpad_array { * @rx_max_burst_prd: max periodic ESS receive burst size * @tx_thr_num_pkt_prd: periodic ESS transmit packet count * @tx_max_burst_prd: max periodic ESS transmit burst size + * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise * @delayed_status: true when gadget driver asks for delayed status @@ -1037,6 +1038,7 @@ struct dwc3_scratchpad_array { * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board * @pending_events: true when we have pending IRQs to be handled + * @do_fifo_resize: true when txfifo resizing is enabled for dwc3 endpoints * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup @@ -1079,6 +1081,11 @@ struct dwc3_scratchpad_array { * @dis_split_quirk: set to disable split boundary. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. + * @max_cfg_eps: current max number of IN eps used across all USB configs. + * @last_fifo_depth: last fifo depth used to determine next fifo ram start + * address. + * @num_ep_resized: carries the current number endpoints which have had its tx + * fifo resized. */ struct dwc3 { struct work_struct drd_work; @@ -1233,6 +1240,7 @@ struct dwc3 { u8 rx_max_burst_prd; u8 tx_thr_num_pkt_prd; u8 tx_max_burst_prd; + u8 tx_fifo_resize_max_num; const char *hsphy_interface; @@ -1246,6 +1254,7 @@ struct dwc3 { unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; unsigned pending_events:1; + unsigned do_fifo_resize:1; unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; @@ -1281,6 +1290,10 @@ struct dwc3 { unsigned dis_split_quirk:1; u16 imod_interval; + + int max_cfg_eps; + int last_fifo_depth; + int num_ep_resized; }; #define INCRX_BURST_MODE 0 @@ -1512,6 +1525,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params); int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, u32 param); +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } @@ -1531,6 +1545,8 @@ static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) { return 0; } +static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc) +{ } #endif #if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) -- cgit 1.4.1