From 14d739f640d894b4b5db1ab3e1df17b865825a42 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 15 Jan 2017 18:50:57 -0500 Subject: scsi: ncr5380: Reduce #include files The NCR5380 wrapper drivers don't export symbols or declarations and don't actually need separate header files. Most of these header files were removed already; only sun3_scsi.h and g_NCR5380.h remain. Move the remaining definitions to the corresponding .c files to improve readability and proximity. The #defines which influence the #included core driver are no longer mixed up with unrelated #defines and #includes. Signed-off-by: Finn Thain Tested-by: Ondrej Zary Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen --- drivers/scsi/sun3_scsi.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 79 insertions(+), 1 deletion(-) (limited to 'drivers/scsi/sun3_scsi.c') diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index 166f466964c4..14cebaf10371 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -34,7 +34,6 @@ #include #include -#include "sun3_scsi.h" /* minimum number of bytes to do dma on */ #define DMA_MIN_SIZE 129 @@ -58,6 +57,85 @@ #include "NCR5380.h" +/* dma regs start at regbase + 8, directly after the NCR regs */ +struct sun3_dma_regs { + unsigned short dma_addr_hi; /* vme only */ + unsigned short dma_addr_lo; /* vme only */ + unsigned short dma_count_hi; /* vme only */ + unsigned short dma_count_lo; /* vme only */ + unsigned short udc_data; /* udc dma data reg (obio only) */ + unsigned short udc_addr; /* uda dma addr reg (obio only) */ + unsigned short fifo_data; /* fifo data reg, + * holds extra byte on odd dma reads + */ + unsigned short fifo_count; + unsigned short csr; /* control/status reg */ + unsigned short bpack_hi; /* vme only */ + unsigned short bpack_lo; /* vme only */ + unsigned short ivect; /* vme only */ + unsigned short fifo_count_hi; /* vme only */ +}; + +/* ucd chip specific regs - live in dvma space */ +struct sun3_udc_regs { + unsigned short rsel; /* select regs to load */ + unsigned short addr_hi; /* high word of addr */ + unsigned short addr_lo; /* low word */ + unsigned short count; /* words to be xfer'd */ + unsigned short mode_hi; /* high word of channel mode */ + unsigned short mode_lo; /* low word of channel mode */ +}; + +/* addresses of the udc registers */ +#define UDC_MODE 0x38 +#define UDC_CSR 0x2e /* command/status */ +#define UDC_CHN_HI 0x26 /* chain high word */ +#define UDC_CHN_LO 0x22 /* chain lo word */ +#define UDC_CURA_HI 0x1a /* cur reg A high */ +#define UDC_CURA_LO 0x0a /* cur reg A low */ +#define UDC_CURB_HI 0x12 /* cur reg B high */ +#define UDC_CURB_LO 0x02 /* cur reg B low */ +#define UDC_MODE_HI 0x56 /* mode reg high */ +#define UDC_MODE_LO 0x52 /* mode reg low */ +#define UDC_COUNT 0x32 /* words to xfer */ + +/* some udc commands */ +#define UDC_RESET 0 +#define UDC_CHN_START 0xa0 /* start chain */ +#define UDC_INT_ENABLE 0x32 /* channel 1 int on */ + +/* udc mode words */ +#define UDC_MODE_HIWORD 0x40 +#define UDC_MODE_LSEND 0xc2 +#define UDC_MODE_LRECV 0xd2 + +/* udc reg selections */ +#define UDC_RSEL_SEND 0x282 +#define UDC_RSEL_RECV 0x182 + +/* bits in csr reg */ +#define CSR_DMA_ACTIVE 0x8000 +#define CSR_DMA_CONFLICT 0x4000 +#define CSR_DMA_BUSERR 0x2000 + +#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */ +#define CSR_SDB_INT 0x200 /* sbc interrupt pending */ +#define CSR_DMA_INT 0x100 /* dma interrupt pending */ + +#define CSR_LEFT 0xc0 +#define CSR_LEFT_3 0xc0 +#define CSR_LEFT_2 0x80 +#define CSR_LEFT_1 0x40 +#define CSR_PACK_ENABLE 0x20 + +#define CSR_DMA_ENABLE 0x10 + +#define CSR_SEND 0x8 /* 1 = send 0 = recv */ +#define CSR_FIFO 0x2 /* reset fifo */ +#define CSR_INTR 0x4 /* interrupt enable */ +#define CSR_SCSI 0x1 + +#define VME_DATA24 0x3d00 extern int sun3_map_test(unsigned long, char *); -- cgit 1.4.1