From 4a6514e6d096716fb7bedf238efaaca877e2a7e8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 16:57:21 -0800 Subject: tty: move obsolete and broken tty drivers to drivers/staging/tty/ As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/tty/ directory where they will be removed after 2.6.41 if no one steps up to claim them. epca epca ip2 istallion riscom8 serial167 specialix stallion Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/char/ip2/i2lib.c | 2214 ---------------------------------------------- 1 file changed, 2214 deletions(-) delete mode 100644 drivers/char/ip2/i2lib.c (limited to 'drivers/char/ip2/i2lib.c') diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c deleted file mode 100644 index 0d10b89218ed..000000000000 --- a/drivers/char/ip2/i2lib.c +++ /dev/null @@ -1,2214 +0,0 @@ -/******************************************************************************* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: High-level interface code for the device driver. Uses the -* Extremely Low Level Interface Support (i2ellis.c). Provides an -* interface to the standard loadware, to support drivers or -* application code. (This is included source code, not a separate -* compilation module.) -* -*******************************************************************************/ -//------------------------------------------------------------------------------ -// Note on Strategy: -// Once the board has been initialized, it will interrupt us when: -// 1) It has something in the fifo for us to read (incoming data, flow control -// packets, or whatever). -// 2) It has stripped whatever we have sent last time in the FIFO (and -// consequently is ready for more). -// -// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This -// worsens performance considerably, but is done so that a great many channels -// might use only a little memory. -//------------------------------------------------------------------------------ - -//------------------------------------------------------------------------------ -// Revision History: -// -// 0.00 - 4/16/91 --- First Draft -// 0.01 - 4/29/91 --- 1st beta release -// 0.02 - 6/14/91 --- Changes to allow small model compilation -// 0.03 - 6/17/91 MAG Break reporting protected from interrupts routines with -// in-line asm added for moving data to/from ring buffers, -// replacing a variety of methods used previously. -// 0.04 - 6/21/91 MAG Initial flow-control packets not queued until -// i2_enable_interrupts time. Former versions would enqueue -// them at i2_init_channel time, before we knew how many -// channels were supposed to exist! -// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now; -// supports new 16-bit protocol and expandable boards. -// - 10/24/91 MAG Most changes in place and stable. -// 0.06 - 2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no -// argument. -// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt -// level (mostly responses to specific commands.) -// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet -// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE -// turning on the interrupt. -// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check -// some incoming. -// -// 1.1 - 12/25/96 AKM Linux version. -// - 10/09/98 DMC Revised Linux version. -//------------------------------------------------------------------------------ - -//************ -//* Includes * -//************ - -#include -#include "i2lib.h" - - -//*********************** -//* Function Prototypes * -//*********************** -static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int); -static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int ); -static void i2StripFifo(i2eBordStrPtr); -static void i2StuffFifoBypass(i2eBordStrPtr); -static void i2StuffFifoFlow(i2eBordStrPtr); -static void i2StuffFifoInline(i2eBordStrPtr); -static int i2RetryFlushOutput(i2ChanStrPtr); - -// Not a documented part of the library routines (careful...) but the Diagnostic -// i2diag.c finds them useful to help the throughput in certain limited -// single-threaded operations. -static void iiSendPendingMail(i2eBordStrPtr); -static void serviceOutgoingFifo(i2eBordStrPtr); - -// Functions defined in ip2.c as part of interrupt handling -static void do_input(struct work_struct *); -static void do_status(struct work_struct *); - -//*************** -//* Debug Data * -//*************** -#ifdef DEBUG_FIFO - -unsigned char DBGBuf[0x4000]; -unsigned short I = 0; - -static void -WriteDBGBuf(char *s, unsigned char *src, unsigned short n ) -{ - char *p = src; - - // XXX: We need a spin lock here if we ever use this again - - while (*s) { // copy label - DBGBuf[I] = *s++; - I = I++ & 0x3fff; - } - while (n--) { // copy data - DBGBuf[I] = *p++; - I = I++ & 0x3fff; - } -} - -static void -fatality(i2eBordStrPtr pB ) -{ - int i; - - for (i=0;i= ' ' && DBGBuf[i] <= '~') { - printk(" %c ",DBGBuf[i]); - } else { - printk(" . "); - } - } - printk("\n"); - printk("Last index %x\n",I); -} -#endif /* DEBUG_FIFO */ - -//******** -//* Code * -//******** - -static inline int -i2Validate ( i2ChanStrPtr pCh ) -{ - //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity, - // (CHANNEL_MAGIC | CHANNEL_SUPPORT)); - return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT)) - == (CHANNEL_MAGIC | CHANNEL_SUPPORT)); -} - -static void iiSendPendingMail_t(unsigned long data) -{ - i2eBordStrPtr pB = (i2eBordStrPtr)data; - - iiSendPendingMail(pB); -} - -//****************************************************************************** -// Function: iiSendPendingMail(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// If any outgoing mail bits are set and there is outgoing mailbox is empty, -// send the mail and clear the bits. -//****************************************************************************** -static void -iiSendPendingMail(i2eBordStrPtr pB) -{ - if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) ) - { - if (iiTrySendMail(pB, pB->i2eOutMailWaiting)) - { - /* If we were already waiting for fifo to empty, - * or just sent MB_OUT_STUFFED, then we are - * still waiting for it to empty, until we should - * receive an MB_IN_STRIPPED from the board. - */ - pB->i2eWaitingForEmptyFifo |= - (pB->i2eOutMailWaiting & MB_OUT_STUFFED); - pB->i2eOutMailWaiting = 0; - pB->SendPendingRetry = 0; - } else { -/* The only time we hit this area is when "iiTrySendMail" has - failed. That only occurs when the outbound mailbox is - still busy with the last message. We take a short breather - to let the board catch up with itself and then try again. - 16 Retries is the limit - then we got a borked board. - /\/\|=mhw=|\/\/ */ - - if( ++pB->SendPendingRetry < 16 ) { - setup_timer(&pB->SendPendingTimer, - iiSendPendingMail_t, (unsigned long)pB); - mod_timer(&pB->SendPendingTimer, jiffies + 1); - } else { - printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" ); - } - } - } -} - -//****************************************************************************** -// Function: i2InitChannels(pB, nChannels, pCh) -// Parameters: Pointer to Ellis Board structure -// Number of channels to initialize -// Pointer to first element in an array of channel structures -// Returns: Success or failure -// -// Description: -// -// This function patches pointers, back-pointers, and initializes all the -// elements in the channel structure array. -// -// This should be run after the board structure is initialized, through having -// loaded the standard loadware (otherwise it complains). -// -// In any case, it must be done before any serious work begins initializing the -// irq's or sending commands... -// -//****************************************************************************** -static int -i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh) -{ - int index, stuffIndex; - i2ChanStrPtr *ppCh; - - if (pB->i2eValid != I2E_MAGIC) { - I2_COMPLETE(pB, I2EE_BADMAGIC); - } - if (pB->i2eState != II_STATE_STDLOADED) { - I2_COMPLETE(pB, I2EE_BADSTATE); - } - - rwlock_init(&pB->read_fifo_spinlock); - rwlock_init(&pB->write_fifo_spinlock); - rwlock_init(&pB->Dbuf_spinlock); - rwlock_init(&pB->Bbuf_spinlock); - rwlock_init(&pB->Fbuf_spinlock); - - // NO LOCK needed yet - this is init - - pB->i2eChannelPtr = pCh; - pB->i2eChannelCnt = nChannels; - - pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0; - pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0; - pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0; - - pB->SendPendingRetry = 0; - - memset ( pCh, 0, sizeof (i2ChanStr) * nChannels ); - - for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf); - nChannels && index < ABS_MOST_PORTS; - index++) - { - if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) { - continue; - } - rwlock_init(&pCh->Ibuf_spinlock); - rwlock_init(&pCh->Obuf_spinlock); - rwlock_init(&pCh->Cbuf_spinlock); - rwlock_init(&pCh->Pbuf_spinlock); - // NO LOCK needed yet - this is init - // Set up validity flag according to support level - if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) { - pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT; - } else { - pCh->validity = CHANNEL_MAGIC; - } - pCh->pMyBord = pB; /* Back-pointer */ - - // Prepare an outgoing flow-control packet to send as soon as the chance - // occurs. - if ( pCh->validity & CHANNEL_SUPPORT ) { - pCh->infl.hd.i2sChannel = index; - pCh->infl.hd.i2sCount = 5; - pCh->infl.hd.i2sType = PTYPE_BYPASS; - pCh->infl.fcmd = 37; - pCh->infl.asof = 0; - pCh->infl.room = IBUF_SIZE - 1; - - pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full - - // The following is similar to calling i2QueueNeeds, except that this - // is done in longhand, since we are setting up initial conditions on - // many channels at once. - pCh->channelNeeds = NEED_FLOW; // Since starting from scratch - pCh->sinceLastFlow = 0; // No bytes received since last flow - // control packet was queued - stuffIndex++; - *ppCh++ = pCh; // List this channel as needing - // initial flow control packet sent - } - - // Don't allow anything to be sent until the status packets come in from - // the board. - - pCh->outfl.asof = 0; - pCh->outfl.room = 0; - - // Initialize all the ring buffers - - pCh->Ibuf_stuff = pCh->Ibuf_strip = 0; - pCh->Obuf_stuff = pCh->Obuf_strip = 0; - pCh->Cbuf_stuff = pCh->Cbuf_strip = 0; - - memset( &pCh->icount, 0, sizeof (struct async_icount) ); - pCh->hotKeyIn = HOT_CLEAR; - pCh->channelOptions = 0; - pCh->bookMarks = 0; - init_waitqueue_head(&pCh->pBookmarkWait); - - init_waitqueue_head(&pCh->open_wait); - init_waitqueue_head(&pCh->close_wait); - init_waitqueue_head(&pCh->delta_msr_wait); - - // Set base and divisor so default custom rate is 9600 - pCh->BaudBase = 921600; // MAX for ST654, changed after we get - pCh->BaudDivisor = 96; // the boxids (UART types) later - - pCh->dataSetIn = 0; - pCh->dataSetOut = 0; - - pCh->wopen = 0; - pCh->throttled = 0; - - pCh->speed = CBR_9600; - - pCh->flags = 0; - - pCh->ClosingDelay = 5*HZ/10; - pCh->ClosingWaitTime = 30*HZ; - - // Initialize task queue objects - INIT_WORK(&pCh->tqueue_input, do_input); - INIT_WORK(&pCh->tqueue_status, do_status); - -#ifdef IP2DEBUG_TRACE - pCh->trace = ip2trace; -#endif - - ++pCh; - --nChannels; - } - // No need to check for wrap here; this is initialization. - pB->i2Fbuf_stuff = stuffIndex; - I2_COMPLETE(pB, I2EE_GOOD); - -} - -//****************************************************************************** -// Function: i2DeQueueNeeds(pB, type) -// Parameters: Pointer to a board structure -// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW -// Returns: -// Pointer to a channel structure -// -// Description: Returns pointer struct of next channel that needs service of -// the type specified. Otherwise returns a NULL reference. -// -//****************************************************************************** -static i2ChanStrPtr -i2DeQueueNeeds(i2eBordStrPtr pB, int type) -{ - unsigned short queueIndex; - unsigned long flags; - - i2ChanStrPtr pCh = NULL; - - switch(type) { - - case NEED_INLINE: - - write_lock_irqsave(&pB->Dbuf_spinlock, flags); - if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip) - { - queueIndex = pB->i2Dbuf_strip; - pCh = pB->i2Dbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Dbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_INLINE; - } - write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); - break; - - case NEED_BYPASS: - - write_lock_irqsave(&pB->Bbuf_spinlock, flags); - if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip) - { - queueIndex = pB->i2Bbuf_strip; - pCh = pB->i2Bbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Bbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_BYPASS; - } - write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); - break; - - case NEED_FLOW: - - write_lock_irqsave(&pB->Fbuf_spinlock, flags); - if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip) - { - queueIndex = pB->i2Fbuf_strip; - pCh = pB->i2Fbuf[queueIndex]; - queueIndex++; - if (queueIndex >= CH_QUEUE_SIZE) { - queueIndex = 0; - } - pB->i2Fbuf_strip = queueIndex; - pCh->channelNeeds &= ~NEED_FLOW; - } - write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); - break; - default: - printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type); - break; - } - return pCh; -} - -//****************************************************************************** -// Function: i2QueueNeeds(pB, pCh, type) -// Parameters: Pointer to a board structure -// Pointer to a channel structure -// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW -// Returns: Nothing -// -// Description: -// For each type of need selected, if the given channel is not already in the -// queue, adds it, and sets the flag indicating it is in the queue. -//****************************************************************************** -static void -i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type) -{ - unsigned short queueIndex; - unsigned long flags; - - // We turn off all the interrupts during this brief process, since the - // interrupt-level code might want to put things on the queue as well. - - switch (type) { - - case NEED_INLINE: - - write_lock_irqsave(&pB->Dbuf_spinlock, flags); - if ( !(pCh->channelNeeds & NEED_INLINE) ) - { - pCh->channelNeeds |= NEED_INLINE; - queueIndex = pB->i2Dbuf_stuff; - pB->i2Dbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Dbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Dbuf_spinlock, flags); - break; - - case NEED_BYPASS: - - write_lock_irqsave(&pB->Bbuf_spinlock, flags); - if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS)) - { - pCh->channelNeeds |= NEED_BYPASS; - queueIndex = pB->i2Bbuf_stuff; - pB->i2Bbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Bbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Bbuf_spinlock, flags); - break; - - case NEED_FLOW: - - write_lock_irqsave(&pB->Fbuf_spinlock, flags); - if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW)) - { - pCh->channelNeeds |= NEED_FLOW; - queueIndex = pB->i2Fbuf_stuff; - pB->i2Fbuf[queueIndex++] = pCh; - if (queueIndex >= CH_QUEUE_SIZE) - queueIndex = 0; - pB->i2Fbuf_stuff = queueIndex; - } - write_unlock_irqrestore(&pB->Fbuf_spinlock, flags); - break; - - case NEED_CREDIT: - pCh->channelNeeds |= NEED_CREDIT; - break; - default: - printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type); - break; - } - return; -} - -//****************************************************************************** -// Function: i2QueueCommands(type, pCh, timeout, nCommands, pCs,...) -// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE -// pointer to the channel structure -// maximum period to wait -// number of commands (n) -// n commands -// Returns: Number of commands sent, or -1 for error -// -// get board lock before calling -// -// Description: -// Queues up some commands to be sent to a channel. To send possibly several -// bypass or inline commands to the given channel. The timeout parameter -// indicates how many HUNDREDTHS OF SECONDS to wait until there is room: -// 0 = return immediately if no room, -ive = wait forever, +ive = number of -// 1/100 seconds to wait. Return values: -// -1 Some kind of nasty error: bad channel structure or invalid arguments. -// 0 No room to send all the commands -// (+) Number of commands sent -//****************************************************************************** -static int -i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands, - cmdSyntaxPtr pCs0,...) -{ - int totalsize = 0; - int blocksize; - int lastended; - cmdSyntaxPtr *ppCs; - cmdSyntaxPtr pCs; - int count; - int flag; - i2eBordStrPtr pB; - - unsigned short maxBlock; - unsigned short maxBuff; - short bufroom; - unsigned short stuffIndex; - unsigned char *pBuf; - unsigned char *pInsert; - unsigned char *pDest, *pSource; - unsigned short channel; - int cnt; - unsigned long flags = 0; - rwlock_t *lock_var_p = NULL; - - // Make sure the channel exists, otherwise do nothing - if ( !i2Validate ( pCh ) ) { - return -1; - } - - ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 ); - - pB = pCh->pMyBord; - - // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT - if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED) - return -2; - // If the board has gone fatal, return bad, and also hit the trap routine if - // it exists. - if (pB->i2eFatal) { - if ( pB->i2eFatalTrap ) { - (*(pB)->i2eFatalTrap)(pB); - } - return -3; - } - // Set up some variables, Which buffers are we using? How big are they? - switch(type) - { - case PTYPE_INLINE: - flag = INL; - maxBlock = MAX_OBUF_BLOCK; - maxBuff = OBUF_SIZE; - pBuf = pCh->Obuf; - break; - case PTYPE_BYPASS: - flag = BYP; - maxBlock = MAX_CBUF_BLOCK; - maxBuff = CBUF_SIZE; - pBuf = pCh->Cbuf; - break; - default: - return -4; - } - // Determine the total size required for all the commands - totalsize = blocksize = sizeof(i2CmdHeader); - lastended = 0; - ppCs = &pCs0; - for ( count = nCommands; count; count--, ppCs++) - { - pCs = *ppCs; - cnt = pCs->length; - // Will a new block be needed for this one? - // Two possible reasons: too - // big or previous command has to be at the end of a packet. - if ((blocksize + cnt > maxBlock) || lastended) { - blocksize = sizeof(i2CmdHeader); - totalsize += sizeof(i2CmdHeader); - } - totalsize += cnt; - blocksize += cnt; - - // If this command had to end a block, then we will make sure to - // account for it should there be any more blocks. - lastended = pCs->flags & END; - } - for (;;) { - // Make sure any pending flush commands go out before we add more data. - if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) { - // How much room (this time through) ? - switch(type) { - case PTYPE_INLINE: - lock_var_p = &pCh->Obuf_spinlock; - write_lock_irqsave(lock_var_p, flags); - stuffIndex = pCh->Obuf_stuff; - bufroom = pCh->Obuf_strip - stuffIndex; - break; - case PTYPE_BYPASS: - lock_var_p = &pCh->Cbuf_spinlock; - write_lock_irqsave(lock_var_p, flags); - stuffIndex = pCh->Cbuf_stuff; - bufroom = pCh->Cbuf_strip - stuffIndex; - break; - default: - return -5; - } - if (--bufroom < 0) { - bufroom += maxBuff; - } - - ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom ); - - // Check for overflow - if (totalsize <= bufroom) { - // Normal Expected path - We still hold LOCK - break; /* from for()- Enough room: goto proceed */ - } - ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); - write_unlock_irqrestore(lock_var_p, flags); - } else - ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize); - - /* Prepare to wait for buffers to empty */ - serviceOutgoingFifo(pB); // Dump what we got - - if (timeout == 0) { - return 0; // Tired of waiting - } - if (timeout > 0) - timeout--; // So negative values == forever - - if (!in_interrupt()) { - schedule_timeout_interruptible(1); // short nap - } else { - // we cannot sched/sleep in interrupt silly - return 0; - } - if (signal_pending(current)) { - return 0; // Wake up! Time to die!!! - } - - ip2trace (CHANN, ITRC_QUEUE, 4, 0 ); - - } // end of for(;;) - - // At this point we have room and the lock - stick them in. - channel = pCh->infl.hd.i2sChannel; - pInsert = &pBuf[stuffIndex]; // Pointer to start of packet - pDest = CMD_OF(pInsert); // Pointer to start of command - - // When we start counting, the block is the size of the header - for (blocksize = sizeof(i2CmdHeader), count = nCommands, - lastended = 0, ppCs = &pCs0; - count; - count--, ppCs++) - { - pCs = *ppCs; // Points to command protocol structure - - // If this is a bookmark request command, post the fact that a bookmark - // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ - // has no parameters! The more general solution would be to reference - // pCs->cmd[0]. - if (pCs == CMD_BMARK_REQ) { - pCh->bookMarks++; - - ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks ); - - } - cnt = pCs->length; - - // If this command would put us over the maximum block size or - // if the last command had to be at the end of a block, we end - // the existing block here and start a new one. - if ((blocksize + cnt > maxBlock) || lastended) { - - ip2trace (CHANN, ITRC_QUEUE, 5, 0 ); - - PTYPE_OF(pInsert) = type; - CHANNEL_OF(pInsert) = channel; - // count here does not include the header - CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); - stuffIndex += blocksize; - if(stuffIndex >= maxBuff) { - stuffIndex = 0; - pInsert = pBuf; - } - pInsert = &pBuf[stuffIndex]; // Pointer to start of next pkt - pDest = CMD_OF(pInsert); - blocksize = sizeof(i2CmdHeader); - } - // Now we know there is room for this one in the current block - - blocksize += cnt; // Total bytes in this command - pSource = pCs->cmd; // Copy the command into the buffer - while (cnt--) { - *pDest++ = *pSource++; - } - // If this command had to end a block, then we will make sure to account - // for it should there be any more blocks. - lastended = pCs->flags & END; - } // end for - // Clean up the final block by writing header, etc - - PTYPE_OF(pInsert) = type; - CHANNEL_OF(pInsert) = channel; - // count here does not include the header - CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader); - stuffIndex += blocksize; - if(stuffIndex >= maxBuff) { - stuffIndex = 0; - pInsert = pBuf; - } - // Updates the index, and post the need for service. When adding these to - // the queue of channels, we turn off the interrupt while doing so, - // because at interrupt level we might want to push a channel back to the - // end of the queue. - switch(type) - { - case PTYPE_INLINE: - pCh->Obuf_stuff = stuffIndex; // Store buffer pointer - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - pB->debugInlineQueued++; - // Add the channel pointer to list of channels needing service (first - // come...), if it's not already there. - i2QueueNeeds(pB, pCh, NEED_INLINE); - break; - - case PTYPE_BYPASS: - pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer - write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); - - pB->debugBypassQueued++; - // Add the channel pointer to list of channels needing service (first - // come...), if it's not already there. - i2QueueNeeds(pB, pCh, NEED_BYPASS); - break; - } - - ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands ); - - return nCommands; // Good status: number of commands sent -} - -//****************************************************************************** -// Function: i2GetStatus(pCh,resetBits) -// Parameters: Pointer to a channel structure -// Bit map of status bits to clear -// Returns: Bit map of current status bits -// -// Description: -// Returns the state of data set signals, and whether a break has been received, -// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status -// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared -// AFTER the condition is passed. If pCh does not point to a valid channel, -// returns -1 (which would be impossible otherwise. -//****************************************************************************** -static int -i2GetStatus(i2ChanStrPtr pCh, int resetBits) -{ - unsigned short status; - i2eBordStrPtr pB; - - ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits ); - - // Make sure the channel exists, otherwise do nothing */ - if ( !i2Validate ( pCh ) ) - return -1; - - pB = pCh->pMyBord; - - status = pCh->dataSetIn; - - // Clear any specified error bits: but note that only actual error bits can - // be cleared, regardless of the value passed. - if (resetBits) - { - pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR)); - pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI); - } - - ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn ); - - return status; -} - -//****************************************************************************** -// Function: i2Input(pChpDest,count) -// Parameters: Pointer to a channel structure -// Pointer to data buffer -// Number of bytes to read -// Returns: Number of bytes read, or -1 for error -// -// Description: -// Strips data from the input buffer and writes it to pDest. If there is a -// collosal blunder, (invalid structure pointers or the like), returns -1. -// Otherwise, returns the number of bytes read. -//****************************************************************************** -static int -i2Input(i2ChanStrPtr pCh) -{ - int amountToMove; - unsigned short stripIndex; - int count; - unsigned long flags = 0; - - ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0); - - // Ensure channel structure seems real - if ( !i2Validate( pCh ) ) { - count = -1; - goto i2Input_exit; - } - write_lock_irqsave(&pCh->Ibuf_spinlock, flags); - - // initialize some accelerators and private copies - stripIndex = pCh->Ibuf_strip; - - count = pCh->Ibuf_stuff - stripIndex; - - // If buffer is empty or requested data count was 0, (trivial case) return - // without any further thought. - if ( count == 0 ) { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - goto i2Input_exit; - } - // Adjust for buffer wrap - if ( count < 0 ) { - count += IBUF_SIZE; - } - // Don't give more than can be taken by the line discipline - amountToMove = pCh->pTTY->receive_room; - if (count > amountToMove) { - count = amountToMove; - } - // How much could we copy without a wrap? - amountToMove = IBUF_SIZE - stripIndex; - - if (amountToMove > count) { - amountToMove = count; - } - // Move the first block - pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, - &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); - // If we needed to wrap, do the second data move - if (count > amountToMove) { - pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, - pCh->Ibuf, NULL, count - amountToMove ); - } - // Bump and wrap the stripIndex all at once by the amount of data read. This - // method is good regardless of whether the data was in one or two pieces. - stripIndex += count; - if (stripIndex >= IBUF_SIZE) { - stripIndex -= IBUF_SIZE; - } - pCh->Ibuf_strip = stripIndex; - - // Update our flow control information and possibly queue ourselves to send - // it, depending on how much data has been stripped since the last time a - // packet was sent. - pCh->infl.asof += count; - - if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) { - pCh->sinceLastFlow -= pCh->whenSendFlow; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); - } else { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } - -i2Input_exit: - - ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count); - - return count; -} - -//****************************************************************************** -// Function: i2InputFlush(pCh) -// Parameters: Pointer to a channel structure -// Returns: Number of bytes stripped, or -1 for error -// -// Description: -// Strips any data from the input buffer. If there is a collosal blunder, -// (invalid structure pointers or the like), returns -1. Otherwise, returns the -// number of bytes stripped. -//****************************************************************************** -static int -i2InputFlush(i2ChanStrPtr pCh) -{ - int count; - unsigned long flags; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) - return -1; - - ip2trace (CHANN, ITRC_INPUT, 10, 0); - - write_lock_irqsave(&pCh->Ibuf_spinlock, flags); - count = pCh->Ibuf_stuff - pCh->Ibuf_strip; - - // Adjust for buffer wrap - if (count < 0) { - count += IBUF_SIZE; - } - - // Expedient way to zero out the buffer - pCh->Ibuf_strip = pCh->Ibuf_stuff; - - - // Update our flow control information and possibly queue ourselves to send - // it, depending on how much data has been stripped since the last time a - // packet was sent. - - pCh->infl.asof += count; - - if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow ) - { - pCh->sinceLastFlow -= pCh->whenSendFlow; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW); - } else { - write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - } - - ip2trace (CHANN, ITRC_INPUT, 19, 1, count); - - return count; -} - -//****************************************************************************** -// Function: i2InputAvailable(pCh) -// Parameters: Pointer to a channel structure -// Returns: Number of bytes available, or -1 for error -// -// Description: -// If there is a collosal blunder, (invalid structure pointers or the like), -// returns -1. Otherwise, returns the number of bytes stripped. Otherwise, -// returns the number of bytes available in the buffer. -//****************************************************************************** -#if 0 -static int -i2InputAvailable(i2ChanStrPtr pCh) -{ - int count; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) return -1; - - - // initialize some accelerators and private copies - read_lock_irqsave(&pCh->Ibuf_spinlock, flags); - count = pCh->Ibuf_stuff - pCh->Ibuf_strip; - read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags); - - // Adjust for buffer wrap - if (count < 0) - { - count += IBUF_SIZE; - } - - return count; -} -#endif - -//****************************************************************************** -// Function: i2Output(pCh, pSource, count) -// Parameters: Pointer to channel structure -// Pointer to source data -// Number of bytes to send -// Returns: Number of bytes sent, or -1 for error -// -// Description: -// Queues the data at pSource to be sent as data packets to the board. If there -// is a collosal blunder, (invalid structure pointers or the like), returns -1. -// Otherwise, returns the number of bytes written. What if there is not enough -// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then -// we transfer as many characters as we can now, then return. If this bit is -// clear (default), routine will spin along until all the data is buffered. -// Should this occur, the 1-ms delay routine is called while waiting to avoid -// applications that one cannot break out of. -//****************************************************************************** -static int -i2Output(i2ChanStrPtr pCh, const char *pSource, int count) -{ - i2eBordStrPtr pB; - unsigned char *pInsert; - int amountToMove; - int countOriginal = count; - unsigned short channel; - unsigned short stuffIndex; - unsigned long flags; - - int bailout = 10; - - ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 ); - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) - return -1; - - // initialize some accelerators and private copies - pB = pCh->pMyBord; - channel = pCh->infl.hd.i2sChannel; - - // If the board has gone fatal, return bad, and also hit the trap routine if - // it exists. - if (pB->i2eFatal) { - if (pB->i2eFatalTrap) { - (*(pB)->i2eFatalTrap)(pB); - } - return -1; - } - // Proceed as though we would do everything - while ( count > 0 ) { - - // How much room in output buffer is there? - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - if (amountToMove < 0) { - amountToMove += OBUF_SIZE; - } - // Subtract off the headers size and see how much room there is for real - // data. If this is negative, we will discover later. - amountToMove -= sizeof (i2DataHeader); - - // Don't move more (now) than can go in a single packet - if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) { - amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader); - } - // Don't move more than the count we were given - if (amountToMove > count) { - amountToMove = count; - } - // Now we know how much we must move: NB because the ring buffers have - // an overflow area at the end, we needn't worry about wrapping in the - // middle of a packet. - -// Small WINDOW here with no LOCK but I can't call Flush with LOCK -// We would be flushing (or ending flush) anyway - - ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove ); - - if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) ) - && amountToMove > 0 ) - { - write_lock_irqsave(&pCh->Obuf_spinlock, flags); - stuffIndex = pCh->Obuf_stuff; - - // Had room to move some data: don't know whether the block size, - // buffer space, or what was the limiting factor... - pInsert = &(pCh->Obuf[stuffIndex]); - - // Set up the header - CHANNEL_OF(pInsert) = channel; - PTYPE_OF(pInsert) = PTYPE_DATA; - TAG_OF(pInsert) = 0; - ID_OF(pInsert) = ID_ORDINARY_DATA; - DATA_COUNT_OF(pInsert) = amountToMove; - - // Move the data - memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove ); - // Adjust pointers and indices - pSource += amountToMove; - pCh->Obuf_char_count += amountToMove; - stuffIndex += amountToMove + sizeof(i2DataHeader); - count -= amountToMove; - - if (stuffIndex >= OBUF_SIZE) { - stuffIndex = 0; - } - pCh->Obuf_stuff = stuffIndex; - - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex ); - - } else { - - // Cannot move data - // becuz we need to stuff a flush - // or amount to move is <= 0 - - ip2trace(CHANN, ITRC_OUTPUT, 14, 3, - amountToMove, pB->i2eFifoRemains, - pB->i2eWaitingForEmptyFifo ); - - // Put this channel back on queue - // this ultimatly gets more data or wakes write output - i2QueueNeeds(pB, pCh, NEED_INLINE); - - if ( pB->i2eWaitingForEmptyFifo ) { - - ip2trace (CHANN, ITRC_OUTPUT, 16, 0 ); - - // or schedule - if (!in_interrupt()) { - - ip2trace (CHANN, ITRC_OUTPUT, 61, 0 ); - - schedule_timeout_interruptible(2); - if (signal_pending(current)) { - break; - } - continue; - } else { - - ip2trace (CHANN, ITRC_OUTPUT, 62, 0 ); - - // let interrupt in = WAS restore_flags() - // We hold no lock nor is irq off anymore??? - - break; - } - break; // from while(count) - } - else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) ) - { - ip2trace (CHANN, ITRC_OUTPUT, 19, 2, - pB->i2eFifoRemains, - pB->i2eTxMailEmpty ); - - break; // from while(count) - } else if ( pCh->channelNeeds & NEED_CREDIT ) { - - ip2trace (CHANN, ITRC_OUTPUT, 22, 0 ); - - break; // from while(count) - } else if ( --bailout) { - - // Try to throw more things (maybe not us) in the fifo if we're - // not already waiting for it. - - ip2trace (CHANN, ITRC_OUTPUT, 20, 0 ); - - serviceOutgoingFifo(pB); - //break; CONTINUE; - } else { - ip2trace (CHANN, ITRC_OUTPUT, 21, 3, - pB->i2eFifoRemains, - pB->i2eOutMailWaiting, - pB->i2eWaitingForEmptyFifo ); - - break; // from while(count) - } - } - } // End of while(count) - - i2QueueNeeds(pB, pCh, NEED_INLINE); - - // We drop through either when the count expires, or when there is some - // count left, but there was a non-blocking write. - if (countOriginal > count) { - - ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count ); - - serviceOutgoingFifo( pB ); - } - - ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count ); - - return countOriginal - count; -} - -//****************************************************************************** -// Function: i2FlushOutput(pCh) -// Parameters: Pointer to a channel structure -// Returns: Nothing -// -// Description: -// Sends bypass command to start flushing (waiting possibly forever until there -// is room), then sends inline command to stop flushing output, (again waiting -// possibly forever). -//****************************************************************************** -static inline void -i2FlushOutput(i2ChanStrPtr pCh) -{ - - ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags ); - - if (pCh->flush_flags) - return; - - if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { - pCh->flush_flags = STARTFL_FLAG; // Failed - flag for later - - ip2trace (CHANN, ITRC_FLUSH, 2, 0 ); - - } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) { - pCh->flush_flags = STOPFL_FLAG; // Failed - flag for later - - ip2trace (CHANN, ITRC_FLUSH, 3, 0 ); - } -} - -static int -i2RetryFlushOutput(i2ChanStrPtr pCh) -{ - int old_flags = pCh->flush_flags; - - ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags ); - - pCh->flush_flags = 0; // Clear flag so we can avoid recursion - // and queue the commands - - if ( old_flags & STARTFL_FLAG ) { - if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) { - old_flags = STOPFL_FLAG; //Success - send stop flush - } else { - old_flags = STARTFL_FLAG; //Failure - Flag for retry later - } - - ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags ); - - } - if ( old_flags & STOPFL_FLAG ) { - if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) { - old_flags = 0; // Success - clear flags - } - - ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags ); - } - pCh->flush_flags = old_flags; - - ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags ); - - return old_flags; -} - -//****************************************************************************** -// Function: i2DrainOutput(pCh,timeout) -// Parameters: Pointer to a channel structure -// Maximum period to wait -// Returns: ? -// -// Description: -// Uses the bookmark request command to ask the board to send a bookmark back as -// soon as all the data is completely sent. -//****************************************************************************** -static void -i2DrainWakeup(unsigned long d) -{ - i2ChanStrPtr pCh = (i2ChanStrPtr)d; - - ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires ); - - pCh->BookmarkTimer.expires = 0; - wake_up_interruptible( &pCh->pBookmarkWait ); -} - -static void -i2DrainOutput(i2ChanStrPtr pCh, int timeout) -{ - wait_queue_t wait; - i2eBordStrPtr pB; - - ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires); - - pB = pCh->pMyBord; - // If the board has gone fatal, return bad, - // and also hit the trap routine if it exists. - if (pB->i2eFatal) { - if (pB->i2eFatalTrap) { - (*(pB)->i2eFatalTrap)(pB); - } - return; - } - if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) { - // One per customer (channel) - setup_timer(&pCh->BookmarkTimer, i2DrainWakeup, - (unsigned long)pCh); - - ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires ); - - mod_timer(&pCh->BookmarkTimer, jiffies + timeout); - } - - i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ ); - - init_waitqueue_entry(&wait, current); - add_wait_queue(&(pCh->pBookmarkWait), &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pB ); - - schedule(); // Now we take our interruptible sleep on - - // Clean up the queue - set_current_state( TASK_RUNNING ); - remove_wait_queue(&(pCh->pBookmarkWait), &wait); - - // if expires == 0 then timer poped, then do not need to del_timer - if ((timeout > 0) && pCh->BookmarkTimer.expires && - time_before(jiffies, pCh->BookmarkTimer.expires)) { - del_timer( &(pCh->BookmarkTimer) ); - pCh->BookmarkTimer.expires = 0; - - ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires ); - - } - ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires ); - return; -} - -//****************************************************************************** -// Function: i2OutputFree(pCh) -// Parameters: Pointer to a channel structure -// Returns: Space in output buffer -// -// Description: -// Returns -1 if very gross error. Otherwise returns the amount of bytes still -// free in the output buffer. -//****************************************************************************** -static int -i2OutputFree(i2ChanStrPtr pCh) -{ - int amountToMove; - unsigned long flags; - - // Ensure channel structure seems real - if ( !i2Validate ( pCh ) ) { - return -1; - } - read_lock_irqsave(&pCh->Obuf_spinlock, flags); - amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1; - read_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - - if (amountToMove < 0) { - amountToMove += OBUF_SIZE; - } - // If this is negative, we will discover later - amountToMove -= sizeof(i2DataHeader); - - return (amountToMove < 0) ? 0 : amountToMove; -} -static void - -ip2_owake( PTTY tp) -{ - i2ChanStrPtr pCh; - - if (tp == NULL) return; - - pCh = tp->driver_data; - - ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags, - (1 << TTY_DO_WRITE_WAKEUP) ); - - tty_wakeup(tp); -} - -static inline void -set_baud_params(i2eBordStrPtr pB) -{ - int i,j; - i2ChanStrPtr *pCh; - - pCh = (i2ChanStrPtr *) pB->i2eChannelPtr; - - for (i = 0; i < ABS_MAX_BOXES; i++) { - if (pB->channelBtypes.bid_value[i]) { - if (BID_HAS_654(pB->channelBtypes.bid_value[i])) { - for (j = 0; j < ABS_BIGGEST_BOX; j++) { - if (pCh[i*16+j] == NULL) - break; - (pCh[i*16+j])->BaudBase = 921600; // MAX for ST654 - (pCh[i*16+j])->BaudDivisor = 96; - } - } else { // has cirrus cd1400 - for (j = 0; j < ABS_BIGGEST_BOX; j++) { - if (pCh[i*16+j] == NULL) - break; - (pCh[i*16+j])->BaudBase = 115200; // MAX for CD1400 - (pCh[i*16+j])->BaudDivisor = 12; - } - } - } - } -} - -//****************************************************************************** -// Function: i2StripFifo(pB) -// Parameters: Pointer to a board structure -// Returns: ? -// -// Description: -// Strips all the available data from the incoming FIFO, identifies the type of -// packet, and either buffers the data or does what needs to be done. -// -// Note there is no overflow checking here: if the board sends more data than it -// ought to, we will not detect it here, but blindly overflow... -//****************************************************************************** - -// A buffer for reading in blocks for unknown channels -static unsigned char junkBuffer[IBUF_SIZE]; - -// A buffer to read in a status packet. Because of the size of the count field -// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE -static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4]; - -// This table changes the bit order from MSR order given by STAT_MODEM packet to -// status bits used in our library. -static char xlatDss[16] = { -0 | 0 | 0 | 0 , -0 | 0 | 0 | I2_CTS , -0 | 0 | I2_DSR | 0 , -0 | 0 | I2_DSR | I2_CTS , -0 | I2_RI | 0 | 0 , -0 | I2_RI | 0 | I2_CTS , -0 | I2_RI | I2_DSR | 0 , -0 | I2_RI | I2_DSR | I2_CTS , -I2_DCD | 0 | 0 | 0 , -I2_DCD | 0 | 0 | I2_CTS , -I2_DCD | 0 | I2_DSR | 0 , -I2_DCD | 0 | I2_DSR | I2_CTS , -I2_DCD | I2_RI | 0 | 0 , -I2_DCD | I2_RI | 0 | I2_CTS , -I2_DCD | I2_RI | I2_DSR | 0 , -I2_DCD | I2_RI | I2_DSR | I2_CTS }; - -static inline void -i2StripFifo(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - int channel; - int count; - unsigned short stuffIndex; - int amountToRead; - unsigned char *pc, *pcLimit; - unsigned char uc; - unsigned char dss_change; - unsigned long bflags,cflags; - -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 ); - - while (I2_HAS_INPUT(pB)) { -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 ); - - // Process packet from fifo a one atomic unit - write_lock_irqsave(&pB->read_fifo_spinlock, bflags); - - // The first word (or two bytes) will have channel number and type of - // packet, possibly other information - pB->i2eLeadoffWord[0] = iiReadWord(pB); - - switch(PTYPE_OF(pB->i2eLeadoffWord)) - { - case PTYPE_DATA: - pB->got_input = 1; - -// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 ); - - channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */ - count = iiReadWord(pB); /* Count is in the next word */ - -// NEW: Check the count for sanity! Should the hardware fail, our death -// is more pleasant. While an oversize channel is acceptable (just more -// than the driver supports), an over-length count clearly means we are -// sick! - if ( ((unsigned int)count) > IBUF_SIZE ) { - pB->i2eFatal = 2; - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - return; /* Bail out ASAP */ - } - // Channel is illegally big ? - if ((channel >= pB->i2eChannelCnt) || - (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel]))) - { - iiReadBuf(pB, junkBuffer, count); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - break; /* From switch: ready for next packet */ - } - - // Channel should be valid, then - - // If this is a hot-key, merely post its receipt for now. These are - // always supposed to be 1-byte packets, so we won't even check the - // count. Also we will post an acknowledgement to the board so that - // more data can be forthcoming. Note that we are not trying to use - // these sequences in this driver, merely to robustly ignore them. - if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY) - { - pCh->hotKeyIn = iiReadWord(pB) & 0xff; - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK); - break; /* From the switch: ready for next packet */ - } - - // Normal data! We crudely assume there is room for the data in our - // buffer because the board wouldn't have exceeded his credit limit. - write_lock_irqsave(&pCh->Ibuf_spinlock, cflags); - // We have 2 locks now - stuffIndex = pCh->Ibuf_stuff; - amountToRead = IBUF_SIZE - stuffIndex; - if (amountToRead > count) - amountToRead = count; - - // stuffIndex would have been already adjusted so there would - // always be room for at least one, and count is always at least - // one. - - iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); - pCh->icount.rx += amountToRead; - - // Update the stuffIndex by the amount of data moved. Note we could - // never ask for more data than would just fit. However, we might - // have read in one more byte than we wanted because the read - // rounds up to even bytes. If this byte is on the end of the - // packet, and is padding, we ignore it. If the byte is part of - // the actual data, we need to move it. - - stuffIndex += amountToRead; - - if (stuffIndex >= IBUF_SIZE) { - if ((amountToRead & 1) && (count > amountToRead)) { - pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE]; - amountToRead++; - stuffIndex = 1; - } else { - stuffIndex = 0; - } - } - - // If there is anything left over, read it as well - if (count > amountToRead) { - amountToRead = count - amountToRead; - iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead); - pCh->icount.rx += amountToRead; - stuffIndex += amountToRead; - } - - // Update stuff index - pCh->Ibuf_stuff = stuffIndex; - write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - -#ifdef USE_IQ - schedule_work(&pCh->tqueue_input); -#else - do_input(&pCh->tqueue_input); -#endif - - // Note we do not need to maintain any flow-control credits at this - // time: if we were to increment .asof and decrement .room, there - // would be no net effect. Instead, when we strip data, we will - // increment .asof and leave .room unchanged. - - break; // From switch: ready for next packet - - case PTYPE_STATUS: - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 ); - - count = CMD_COUNT_OF(pB->i2eLeadoffWord); - - iiReadBuf(pB, cmdBuffer, count); - // We can release early with buffer grab - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - - pc = cmdBuffer; - pcLimit = &(cmdBuffer[count]); - - while (pc < pcLimit) { - channel = *pc++; - - ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc ); - - /* check for valid channel */ - if (channel < pB->i2eChannelCnt - && - (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL - ) - { - dss_change = 0; - - switch (uc = *pc++) - { - /* Breaks and modem signals are easy: just update status */ - case STAT_CTS_UP: - if ( !(pCh->dataSetIn & I2_CTS) ) - { - pCh->dataSetIn |= I2_DCTS; - pCh->icount.cts++; - dss_change = 1; - } - pCh->dataSetIn |= I2_CTS; - break; - - case STAT_CTS_DN: - if ( pCh->dataSetIn & I2_CTS ) - { - pCh->dataSetIn |= I2_DCTS; - pCh->icount.cts++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_CTS; - break; - - case STAT_DCD_UP: - ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn ); - - if ( !(pCh->dataSetIn & I2_DCD) ) - { - ip2trace (CHANN, ITRC_MODEM, 2, 0 ); - pCh->dataSetIn |= I2_DDCD; - pCh->icount.dcd++; - dss_change = 1; - } - pCh->dataSetIn |= I2_DCD; - - ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn ); - break; - - case STAT_DCD_DN: - ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn ); - if ( pCh->dataSetIn & I2_DCD ) - { - ip2trace (channel, ITRC_MODEM, 5, 0 ); - pCh->dataSetIn |= I2_DDCD; - pCh->icount.dcd++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_DCD; - - ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn ); - break; - - case STAT_DSR_UP: - if ( !(pCh->dataSetIn & I2_DSR) ) - { - pCh->dataSetIn |= I2_DDSR; - pCh->icount.dsr++; - dss_change = 1; - } - pCh->dataSetIn |= I2_DSR; - break; - - case STAT_DSR_DN: - if ( pCh->dataSetIn & I2_DSR ) - { - pCh->dataSetIn |= I2_DDSR; - pCh->icount.dsr++; - dss_change = 1; - } - pCh->dataSetIn &= ~I2_DSR; - break; - - case STAT_RI_UP: - if ( !(pCh->dataSetIn & I2_RI) ) - { - pCh->dataSetIn |= I2_DRI; - pCh->icount.rng++; - dss_change = 1; - } - pCh->dataSetIn |= I2_RI ; - break; - - case STAT_RI_DN: - // to be compat with serial.c - //if ( pCh->dataSetIn & I2_RI ) - //{ - // pCh->dataSetIn |= I2_DRI; - // pCh->icount.rng++; - // dss_change = 1; - //} - pCh->dataSetIn &= ~I2_RI ; - break; - - case STAT_BRK_DET: - pCh->dataSetIn |= I2_BRK; - pCh->icount.brk++; - dss_change = 1; - break; - - // Bookmarks? one less request we're waiting for - case STAT_BMARK: - pCh->bookMarks--; - if (pCh->bookMarks <= 0 ) { - pCh->bookMarks = 0; - wake_up_interruptible( &pCh->pBookmarkWait ); - - ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires ); - } - break; - - // Flow control packets? Update the new credits, and if - // someone was waiting for output, queue him up again. - case STAT_FLOW: - pCh->outfl.room = - ((flowStatPtr)pc)->room - - (pCh->outfl.asof - ((flowStatPtr)pc)->asof); - - ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room ); - - if (pCh->channelNeeds & NEED_CREDIT) - { - ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds); - - pCh->channelNeeds &= ~NEED_CREDIT; - i2QueueNeeds(pB, pCh, NEED_INLINE); - if ( pCh->pTTY ) - ip2_owake(pCh->pTTY); - } - - ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds); - - pc += sizeof(flowStat); - break; - - /* Special packets: */ - /* Just copy the information into the channel structure */ - - case STAT_STATUS: - - pCh->channelStatus = *((debugStatPtr)pc); - pc += sizeof(debugStat); - break; - - case STAT_TXCNT: - - pCh->channelTcount = *((cntStatPtr)pc); - pc += sizeof(cntStat); - break; - - case STAT_RXCNT: - - pCh->channelRcount = *((cntStatPtr)pc); - pc += sizeof(cntStat); - break; - - case STAT_BOXIDS: - pB->channelBtypes = *((bidStatPtr)pc); - pc += sizeof(bidStat); - set_baud_params(pB); - break; - - case STAT_HWFAIL: - i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST); - pCh->channelFail = *((failStatPtr)pc); - pc += sizeof(failStat); - break; - - /* No explicit match? then - * Might be an error packet... - */ - default: - switch (uc & STAT_MOD_ERROR) - { - case STAT_ERROR: - if (uc & STAT_E_PARITY) { - pCh->dataSetIn |= I2_PAR; - pCh->icount.parity++; - } - if (uc & STAT_E_FRAMING){ - pCh->dataSetIn |= I2_FRA; - pCh->icount.frame++; - } - if (uc & STAT_E_OVERRUN){ - pCh->dataSetIn |= I2_OVR; - pCh->icount.overrun++; - } - break; - - case STAT_MODEM: - // the answer to DSS_NOW request (not change) - pCh->dataSetIn = (pCh->dataSetIn - & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) ) - | xlatDss[uc & 0xf]; - wake_up_interruptible ( &pCh->dss_now_wait ); - default: - break; - } - } /* End of switch on status type */ - if (dss_change) { -#ifdef USE_IQ - schedule_work(&pCh->tqueue_status); -#else - do_status(&pCh->tqueue_status); -#endif - } - } - else /* Or else, channel is invalid */ - { - // Even though the channel is invalid, we must test the - // status to see how much additional data it has (to be - // skipped) - switch (*pc++) - { - case STAT_FLOW: - pc += 4; /* Skip the data */ - break; - - default: - break; - } - } - } // End of while (there is still some status packet left) - break; - - default: // Neither packet? should be impossible - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1, - PTYPE_OF(pB->i2eLeadoffWord) ); - write_unlock_irqrestore(&pB->read_fifo_spinlock, - bflags); - - break; - } // End of switch on type of packets - } /*while(board I2_HAS_INPUT)*/ - - ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 ); - - // Send acknowledgement to the board even if there was no data! - pB->i2eOutMailWaiting |= MB_IN_STRIPPED; - return; -} - -//****************************************************************************** -// Function: i2Write2Fifo(pB,address,count) -// Parameters: Pointer to a board structure, source address, byte count -// Returns: bytes written -// -// Description: -// Writes count bytes to board io address(implied) from source -// Adjusts count, leaves reserve for next time around bypass cmds -//****************************************************************************** -static int -i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve) -{ - int rc = 0; - unsigned long flags; - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - if (!pB->i2eWaitingForEmptyFifo) { - if (pB->i2eFifoRemains > (count+reserve)) { - pB->i2eFifoRemains -= count; - iiWriteBuf(pB, source, count); - pB->i2eOutMailWaiting |= MB_OUT_STUFFED; - rc = count; - } - } - write_unlock_irqrestore(&pB->write_fifo_spinlock, flags); - return rc; -} -//****************************************************************************** -// Function: i2StuffFifoBypass(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as many bypass commands into the fifo as possible. This is simpler -// than stuffing data or inline commands to fifo, since we do not have -// flow-control to deal with. -//****************************************************************************** -static inline void -i2StuffFifoBypass(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned char *pRemove; - unsigned short stripIndex; - unsigned short packetSize; - unsigned short paddedSize; - unsigned short notClogged = 1; - unsigned long flags; - - int bailout = 1000; - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( --bailout && notClogged && - (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS)))) - { - write_lock_irqsave(&pCh->Cbuf_spinlock, flags); - stripIndex = pCh->Cbuf_strip; - - // as long as there are packets for this channel... - - while (stripIndex != pCh->Cbuf_stuff) { - pRemove = &(pCh->Cbuf[stripIndex]); - packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader); - paddedSize = roundup(packetSize, 2); - - if (paddedSize > 0) { - if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) { - notClogged = 0; /* fifo full */ - i2QueueNeeds(pB, pCh, NEED_BYPASS); // Put back on queue - break; // Break from the channel - } - } -#ifdef DEBUG_FIFO -WriteDBGBuf("BYPS", pRemove, paddedSize); -#endif /* DEBUG_FIFO */ - pB->debugBypassCount++; - - pRemove += packetSize; - stripIndex += packetSize; - if (stripIndex >= CBUF_SIZE) { - stripIndex = 0; - pRemove = pCh->Cbuf; - } - } - // Done with this channel. Move to next, removing this one from - // the queue of channels if we cleaned it out (i.e., didn't get clogged. - pCh->Cbuf_strip = stripIndex; - write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags); - } // Either clogged or finished all the work - -#ifdef IP2DEBUG_TRACE - if ( !bailout ) { - ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 ); - } -#endif -} - -//****************************************************************************** -// Function: i2StuffFifoFlow(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as many flow control packets into the fifo as possible. This is easier -// even than doing normal bypass commands, because there is always at most one -// packet, already assembled, for each channel. -//****************************************************************************** -static inline void -i2StuffFifoFlow(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned short paddedSize = roundup(sizeof(flowIn), 2); - - ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2, - pB->i2eFifoRemains, paddedSize ); - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) { - pB->debugFlowCount++; - - // NO Chan LOCK needed ??? - if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) { - break; - } -#ifdef DEBUG_FIFO - WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize); -#endif /* DEBUG_FIFO */ - - } // Either clogged or finished all the work - - ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 ); -} - -//****************************************************************************** -// Function: i2StuffFifoInline(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Stuffs as much data and inline commands into the fifo as possible. This is -// the most complex fifo-stuffing operation, since there if now the channel -// flow-control issue to deal with. -//****************************************************************************** -static inline void -i2StuffFifoInline(i2eBordStrPtr pB) -{ - i2ChanStrPtr pCh; - unsigned char *pRemove; - unsigned short stripIndex; - unsigned short packetSize; - unsigned short paddedSize; - unsigned short notClogged = 1; - unsigned short flowsize; - unsigned long flags; - - int bailout = 1000; - int bailout2; - - ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains, - pB->i2Dbuf_strip, pB->i2Dbuf_stuff ); - - // Continue processing so long as there are entries, or there is room in the - // fifo. Each entry represents a channel with something to do. - while ( --bailout && notClogged && - (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) ) - { - write_lock_irqsave(&pCh->Obuf_spinlock, flags); - stripIndex = pCh->Obuf_strip; - - ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff ); - - // as long as there are packets for this channel... - bailout2 = 1000; - while ( --bailout2 && stripIndex != pCh->Obuf_stuff) { - pRemove = &(pCh->Obuf[stripIndex]); - - // Must determine whether this be a data or command packet to - // calculate correctly the header size and the amount of - // flow-control credit this type of packet will use. - if (PTYPE_OF(pRemove) == PTYPE_DATA) { - flowsize = DATA_COUNT_OF(pRemove); - packetSize = flowsize + sizeof(i2DataHeader); - } else { - flowsize = CMD_COUNT_OF(pRemove); - packetSize = flowsize + sizeof(i2CmdHeader); - } - flowsize = CREDIT_USAGE(flowsize); - paddedSize = roundup(packetSize, 2); - - ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize ); - - // If we don't have enough credits from the board to send the data, - // flag the channel that we are waiting for flow control credit, and - // break out. This will clean up this channel and remove us from the - // queue of hot things to do. - - ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize ); - - if (pCh->outfl.room <= flowsize) { - // Do Not have the credits to send this packet. - i2QueueNeeds(pB, pCh, NEED_CREDIT); - notClogged = 0; - break; // So to do next channel - } - if ( (paddedSize > 0) - && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) { - // Do Not have room in fifo to send this packet. - notClogged = 0; - i2QueueNeeds(pB, pCh, NEED_INLINE); - break; // Break from the channel - } -#ifdef DEBUG_FIFO -WriteDBGBuf("DATA", pRemove, paddedSize); -#endif /* DEBUG_FIFO */ - pB->debugInlineCount++; - - pCh->icount.tx += flowsize; - // Update current credits - pCh->outfl.room -= flowsize; - pCh->outfl.asof += flowsize; - if (PTYPE_OF(pRemove) == PTYPE_DATA) { - pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove); - } - pRemove += packetSize; - stripIndex += packetSize; - - ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip); - - if (stripIndex >= OBUF_SIZE) { - stripIndex = 0; - pRemove = pCh->Obuf; - - ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex ); - - } - } /* while */ - if ( !bailout2 ) { - ip2trace (CHANN, ITRC_ERROR, 3, 0 ); - } - // Done with this channel. Move to next, removing this one from the - // queue of channels if we cleaned it out (i.e., didn't get clogged. - pCh->Obuf_strip = stripIndex; - write_unlock_irqrestore(&pCh->Obuf_spinlock, flags); - if ( notClogged ) - { - - ip2trace (CHANN, ITRC_SICMD, 8, 0 ); - - if ( pCh->pTTY ) { - ip2_owake(pCh->pTTY); - } - } - } // Either clogged or finished all the work - - if ( !bailout ) { - ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 ); - } - - ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip); -} - -//****************************************************************************** -// Function: serviceOutgoingFifo(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Helper routine to put data in the outgoing fifo, if we aren't already waiting -// for something to be there. If the fifo has only room for a very little data, -// go head and hit the board with a mailbox hit immediately. Otherwise, it will -// have to happen later in the interrupt processing. Since this routine may be -// called both at interrupt and foreground time, we must turn off interrupts -// during the entire process. -//****************************************************************************** -static void -serviceOutgoingFifo(i2eBordStrPtr pB) -{ - // If we aren't currently waiting for the board to empty our fifo, service - // everything that is pending, in priority order (especially, Bypass before - // Inline). - if ( ! pB->i2eWaitingForEmptyFifo ) - { - i2StuffFifoFlow(pB); - i2StuffFifoBypass(pB); - i2StuffFifoInline(pB); - - iiSendPendingMail(pB); - } -} - -//****************************************************************************** -// Function: i2ServiceBoard(pB) -// Parameters: Pointer to a board structure -// Returns: Nothing -// -// Description: -// Normally this is called from interrupt level, but there is deliberately -// nothing in here specific to being called from interrupt level. All the -// hardware-specific, interrupt-specific things happen at the outer levels. -// -// For example, a timer interrupt could drive this routine for some sort of -// polled operation. The only requirement is that the programmer deal with any -// atomiticity/concurrency issues that result. -// -// This routine responds to the board's having sent mailbox information to the -// host (which would normally cause an interrupt). This routine reads the -// incoming mailbox. If there is no data in it, this board did not create the -// interrupt and/or has nothing to be done to it. (Except, if we have been -// waiting to write mailbox data to it, we may do so. -// -// Based on the value in the mailbox, we may take various actions. -// -// No checking here of pB validity: after all, it shouldn't have been called by -// the handler unless pB were on the list. -//****************************************************************************** -static inline int -i2ServiceBoard ( i2eBordStrPtr pB ) -{ - unsigned inmail; - unsigned long flags; - - - /* This should be atomic because of the way we are called... */ - if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) { - inmail = iiGetMail(pB); - } - pB->i2eStartMail = NO_MAIL_HERE; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail ); - - if (inmail != NO_MAIL_HERE) { - // If the board has gone fatal, nothing to do but hit a bit that will - // alert foreground tasks to protest! - if ( inmail & MB_FATAL_ERROR ) { - pB->i2eFatal = 1; - goto exit_i2ServiceBoard; - } - - /* Assuming no fatal condition, we proceed to do work */ - if ( inmail & MB_IN_STUFFED ) { - pB->i2eFifoInInts++; - i2StripFifo(pB); /* There might be incoming packets */ - } - - if (inmail & MB_OUT_STRIPPED) { - pB->i2eFifoOutInts++; - write_lock_irqsave(&pB->write_fifo_spinlock, flags); - pB->i2eFifoRemains = pB->i2eFifoSize; - pB->i2eWaitingForEmptyFifo = 0; - write_unlock_irqrestore(&pB->write_fifo_spinlock, - flags); - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains ); - - } - serviceOutgoingFifo(pB); - } - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 ); - -exit_i2ServiceBoard: - - return 0; -} -- cgit 1.4.1