From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/acpi/dispatcher/dsmthdat.c | 715 +++++++++++++++++++++++++++++++++++++ 1 file changed, 715 insertions(+) create mode 100644 drivers/acpi/dispatcher/dsmthdat.c (limited to 'drivers/acpi/dispatcher/dsmthdat.c') diff --git a/drivers/acpi/dispatcher/dsmthdat.c b/drivers/acpi/dispatcher/dsmthdat.c new file mode 100644 index 000000000000..f31d095f9833 --- /dev/null +++ b/drivers/acpi/dispatcher/dsmthdat.c @@ -0,0 +1,715 @@ +/******************************************************************************* + * + * Module Name: dsmthdat - control method arguments and local variables + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +#include +#include +#include +#include +#include + + +#define _COMPONENT ACPI_DISPATCHER + ACPI_MODULE_NAME ("dsmthdat") + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_init + * + * PARAMETERS: walk_state - Current walk state object + * + * RETURN: Status + * + * DESCRIPTION: Initialize the data structures that hold the method's arguments + * and locals. The data struct is an array of NTEs for each. + * This allows ref_of and de_ref_of to work properly for these + * special data types. + * + * NOTES: walk_state fields are initialized to zero by the + * ACPI_MEM_CALLOCATE(). + * + * A pseudo-Namespace Node is assigned to each argument and local + * so that ref_of() can return a pointer to the Node. + * + ******************************************************************************/ + +void +acpi_ds_method_data_init ( + struct acpi_walk_state *walk_state) +{ + u32 i; + + + ACPI_FUNCTION_TRACE ("ds_method_data_init"); + + + /* Init the method arguments */ + + for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) { + ACPI_MOVE_32_TO_32 (&walk_state->arguments[i].name, + NAMEOF_ARG_NTE); + walk_state->arguments[i].name.integer |= (i << 24); + walk_state->arguments[i].descriptor = ACPI_DESC_TYPE_NAMED; + walk_state->arguments[i].type = ACPI_TYPE_ANY; + walk_state->arguments[i].flags = ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_ARG; + } + + /* Init the method locals */ + + for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) { + ACPI_MOVE_32_TO_32 (&walk_state->local_variables[i].name, + NAMEOF_LOCAL_NTE); + + walk_state->local_variables[i].name.integer |= (i << 24); + walk_state->local_variables[i].descriptor = ACPI_DESC_TYPE_NAMED; + walk_state->local_variables[i].type = ACPI_TYPE_ANY; + walk_state->local_variables[i].flags = ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_LOCAL; + } + + return_VOID; +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_delete_all + * + * PARAMETERS: walk_state - Current walk state object + * + * RETURN: None + * + * DESCRIPTION: Delete method locals and arguments. Arguments are only + * deleted if this method was called from another method. + * + ******************************************************************************/ + +void +acpi_ds_method_data_delete_all ( + struct acpi_walk_state *walk_state) +{ + u32 index; + + + ACPI_FUNCTION_TRACE ("ds_method_data_delete_all"); + + + /* Detach the locals */ + + for (index = 0; index < ACPI_METHOD_NUM_LOCALS; index++) { + if (walk_state->local_variables[index].object) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Local%d=%p\n", + index, walk_state->local_variables[index].object)); + + /* Detach object (if present) and remove a reference */ + + acpi_ns_detach_object (&walk_state->local_variables[index]); + } + } + + /* Detach the arguments */ + + for (index = 0; index < ACPI_METHOD_NUM_ARGS; index++) { + if (walk_state->arguments[index].object) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Arg%d=%p\n", + index, walk_state->arguments[index].object)); + + /* Detach object (if present) and remove a reference */ + + acpi_ns_detach_object (&walk_state->arguments[index]); + } + } + + return_VOID; +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_init_args + * + * PARAMETERS: *Params - Pointer to a parameter list for the method + * max_param_count - The arg count for this method + * walk_state - Current walk state object + * + * RETURN: Status + * + * DESCRIPTION: Initialize arguments for a method. The parameter list is a list + * of ACPI operand objects, either null terminated or whose length + * is defined by max_param_count. + * + ******************************************************************************/ + +acpi_status +acpi_ds_method_data_init_args ( + union acpi_operand_object **params, + u32 max_param_count, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + u32 index = 0; + + + ACPI_FUNCTION_TRACE_PTR ("ds_method_data_init_args", params); + + + if (!params) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "No param list passed to method\n")); + return_ACPI_STATUS (AE_OK); + } + + /* Copy passed parameters into the new method stack frame */ + + while ((index < ACPI_METHOD_NUM_ARGS) && (index < max_param_count) && params[index]) { + /* + * A valid parameter. + * Store the argument in the method/walk descriptor. + * Do not copy the arg in order to implement call by reference + */ + status = acpi_ds_method_data_set_value (AML_ARG_OP, index, params[index], walk_state); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + index++; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%d args passed to method\n", index)); + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_get_node + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument whose type + * to get + * walk_state - Current walk state object + * + * RETURN: Get the Node associated with a local or arg. + * + ******************************************************************************/ + +acpi_status +acpi_ds_method_data_get_node ( + u16 opcode, + u32 index, + struct acpi_walk_state *walk_state, + struct acpi_namespace_node **node) +{ + ACPI_FUNCTION_TRACE ("ds_method_data_get_node"); + + + /* + * Method Locals and Arguments are supported + */ + switch (opcode) { + case AML_LOCAL_OP: + + if (index > ACPI_METHOD_MAX_LOCAL) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Local index %d is invalid (max %d)\n", + index, ACPI_METHOD_MAX_LOCAL)); + return_ACPI_STATUS (AE_AML_INVALID_INDEX); + } + + /* Return a pointer to the pseudo-node */ + + *node = &walk_state->local_variables[index]; + break; + + case AML_ARG_OP: + + if (index > ACPI_METHOD_MAX_ARG) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Arg index %d is invalid (max %d)\n", + index, ACPI_METHOD_MAX_ARG)); + return_ACPI_STATUS (AE_AML_INVALID_INDEX); + } + + /* Return a pointer to the pseudo-node */ + + *node = &walk_state->arguments[index]; + break; + + default: + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Opcode %d is invalid\n", opcode)); + return_ACPI_STATUS (AE_AML_BAD_OPCODE); + } + + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_set_value + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument to get + * Object - Object to be inserted into the stack entry + * walk_state - Current walk state object + * + * RETURN: Status + * + * DESCRIPTION: Insert an object onto the method stack at entry Opcode:Index. + * Note: There is no "implicit conversion" for locals. + * + ******************************************************************************/ + +acpi_status +acpi_ds_method_data_set_value ( + u16 opcode, + u32 index, + union acpi_operand_object *object, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + struct acpi_namespace_node *node; + + + ACPI_FUNCTION_TRACE ("ds_method_data_set_value"); + + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "new_obj %p Opcode %X, Refs=%d [%s]\n", object, + opcode, object->common.reference_count, + acpi_ut_get_type_name (object->common.type))); + + /* Get the namespace node for the arg/local */ + + status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + /* + * Increment ref count so object can't be deleted while installed. + * NOTE: We do not copy the object in order to preserve the call by + * reference semantics of ACPI Control Method invocation. + * (See ACPI specification 2.0_c) + */ + acpi_ut_add_reference (object); + + /* Install the object */ + + node->object = object; + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_get_type + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument whose type + * to get + * walk_state - Current walk state object + * + * RETURN: Data type of current value of the selected Arg or Local + * + ******************************************************************************/ +#ifdef ACPI_FUTURE_USAGE +acpi_object_type +acpi_ds_method_data_get_type ( + u16 opcode, + u32 index, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + struct acpi_namespace_node *node; + union acpi_operand_object *object; + + + ACPI_FUNCTION_TRACE ("ds_method_data_get_type"); + + + /* Get the namespace node for the arg/local */ + + status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node); + if (ACPI_FAILURE (status)) { + return_VALUE ((ACPI_TYPE_NOT_FOUND)); + } + + /* Get the object */ + + object = acpi_ns_get_attached_object (node); + if (!object) { + /* Uninitialized local/arg, return TYPE_ANY */ + + return_VALUE (ACPI_TYPE_ANY); + } + + /* Get the object type */ + + return_VALUE (ACPI_GET_OBJECT_TYPE (object)); +} +#endif /* ACPI_FUTURE_USAGE */ + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_get_value + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument to get + * walk_state - Current walk state object + * *dest_desc - Ptr to Descriptor into which selected Arg + * or Local value should be copied + * + * RETURN: Status + * + * DESCRIPTION: Retrieve value of selected Arg or Local from the method frame + * at the current top of the method stack. + * Used only in acpi_ex_resolve_to_value(). + * + ******************************************************************************/ + +acpi_status +acpi_ds_method_data_get_value ( + u16 opcode, + u32 index, + struct acpi_walk_state *walk_state, + union acpi_operand_object **dest_desc) +{ + acpi_status status; + struct acpi_namespace_node *node; + union acpi_operand_object *object; + + + ACPI_FUNCTION_TRACE ("ds_method_data_get_value"); + + + /* Validate the object descriptor */ + + if (!dest_desc) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null object descriptor pointer\n")); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* Get the namespace node for the arg/local */ + + status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + /* Get the object from the node */ + + object = node->object; + + /* Examine the returned object, it must be valid. */ + + if (!object) { + /* + * Index points to uninitialized object. + * This means that either 1) The expected argument was + * not passed to the method, or 2) A local variable + * was referenced by the method (via the ASL) + * before it was initialized. Either case is an error. + */ + + /* If slack enabled, init the local_x/arg_x to an Integer of value zero */ + + if (acpi_gbl_enable_interpreter_slack) { + object = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER); + if (!object) { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + object->integer.value = 0; + node->object = object; + } + + /* Otherwise, return the error */ + + else switch (opcode) { + case AML_ARG_OP: + + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Uninitialized Arg[%d] at node %p\n", + index, node)); + + return_ACPI_STATUS (AE_AML_UNINITIALIZED_ARG); + + case AML_LOCAL_OP: + + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Uninitialized Local[%d] at node %p\n", + index, node)); + + return_ACPI_STATUS (AE_AML_UNINITIALIZED_LOCAL); + + default: + ACPI_REPORT_ERROR (("Not Arg/Local opcode: %X\n", opcode)); + return_ACPI_STATUS (AE_AML_INTERNAL); + } + } + + /* + * The Index points to an initialized and valid object. + * Return an additional reference to the object + */ + *dest_desc = object; + acpi_ut_add_reference (object); + + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_method_data_delete_value + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument to delete + * walk_state - Current walk state object + * + * RETURN: None + * + * DESCRIPTION: Delete the entry at Opcode:Index on the method stack. Inserts + * a null into the stack slot after the object is deleted. + * + ******************************************************************************/ + +void +acpi_ds_method_data_delete_value ( + u16 opcode, + u32 index, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + struct acpi_namespace_node *node; + union acpi_operand_object *object; + + + ACPI_FUNCTION_TRACE ("ds_method_data_delete_value"); + + + /* Get the namespace node for the arg/local */ + + status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node); + if (ACPI_FAILURE (status)) { + return_VOID; + } + + /* Get the associated object */ + + object = acpi_ns_get_attached_object (node); + + /* + * Undefine the Arg or Local by setting its descriptor + * pointer to NULL. Locals/Args can contain both + * ACPI_OPERAND_OBJECTS and ACPI_NAMESPACE_NODEs + */ + node->object = NULL; + + if ((object) && + (ACPI_GET_DESCRIPTOR_TYPE (object) == ACPI_DESC_TYPE_OPERAND)) { + /* + * There is a valid object. + * Decrement the reference count by one to balance the + * increment when the object was stored. + */ + acpi_ut_remove_reference (object); + } + + return_VOID; +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ds_store_object_to_local + * + * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP + * Index - which local_var or argument to set + * obj_desc - Value to be stored + * walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed + * as the new value for the Arg or Local and the reference count + * for obj_desc is incremented. + * + ******************************************************************************/ + +acpi_status +acpi_ds_store_object_to_local ( + u16 opcode, + u32 index, + union acpi_operand_object *obj_desc, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + struct acpi_namespace_node *node; + union acpi_operand_object *current_obj_desc; + union acpi_operand_object *new_obj_desc; + + + ACPI_FUNCTION_TRACE ("ds_store_object_to_local"); + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Opcode=%X Index=%d Obj=%p\n", + opcode, index, obj_desc)); + + /* Parameter validation */ + + if (!obj_desc) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* Get the namespace node for the arg/local */ + + status = acpi_ds_method_data_get_node (opcode, index, walk_state, &node); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + current_obj_desc = acpi_ns_get_attached_object (node); + if (current_obj_desc == obj_desc) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p already installed!\n", + obj_desc)); + return_ACPI_STATUS (status); + } + + /* + * If the reference count on the object is more than one, we must + * take a copy of the object before we store. A reference count + * of exactly 1 means that the object was just created during the + * evaluation of an expression, and we can safely use it since it + * is not used anywhere else. + */ + new_obj_desc = obj_desc; + if (obj_desc->common.reference_count > 1) { + status = acpi_ut_copy_iobject_to_iobject (obj_desc, &new_obj_desc, walk_state); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + } + + /* + * If there is an object already in this slot, we either + * have to delete it, or if this is an argument and there + * is an object reference stored there, we have to do + * an indirect store! + */ + if (current_obj_desc) { + /* + * Check for an indirect store if an argument + * contains an object reference (stored as an Node). + * We don't allow this automatic dereferencing for + * locals, since a store to a local should overwrite + * anything there, including an object reference. + * + * If both Arg0 and Local0 contain ref_of (Local4): + * + * Store (1, Arg0) - Causes indirect store to local4 + * Store (1, Local0) - Stores 1 in local0, overwriting + * the reference to local4 + * Store (1, de_refof (Local0)) - Causes indirect store to local4 + * + * Weird, but true. + */ + if (opcode == AML_ARG_OP) { + /* + * Make sure that the object is the correct type. This may be overkill, but + * it is here because references were NS nodes in the past. Now they are + * operand objects of type Reference. + */ + if (ACPI_GET_DESCRIPTOR_TYPE (current_obj_desc) != ACPI_DESC_TYPE_OPERAND) { + ACPI_REPORT_ERROR (("Invalid descriptor type while storing to method arg: [%s]\n", + acpi_ut_get_descriptor_name (current_obj_desc))); + return_ACPI_STATUS (AE_AML_INTERNAL); + } + + /* + * If we have a valid reference object that came from ref_of(), do the + * indirect store + */ + if ((current_obj_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) && + (current_obj_desc->reference.opcode == AML_REF_OF_OP)) { + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "Arg (%p) is an obj_ref(Node), storing in node %p\n", + new_obj_desc, current_obj_desc)); + + /* + * Store this object to the Node (perform the indirect store) + * NOTE: No implicit conversion is performed, as per the ACPI + * specification rules on storing to Locals/Args. + */ + status = acpi_ex_store_object_to_node (new_obj_desc, + current_obj_desc->reference.object, walk_state, + ACPI_NO_IMPLICIT_CONVERSION); + + /* Remove local reference if we copied the object above */ + + if (new_obj_desc != obj_desc) { + acpi_ut_remove_reference (new_obj_desc); + } + return_ACPI_STATUS (status); + } + } + + /* + * Delete the existing object + * before storing the new one + */ + acpi_ds_method_data_delete_value (opcode, index, walk_state); + } + + /* + * Install the Obj descriptor (*new_obj_desc) into + * the descriptor for the Arg or Local. + * (increments the object reference count by one) + */ + status = acpi_ds_method_data_set_value (opcode, index, new_obj_desc, walk_state); + + /* Remove local reference if we copied the object above */ + + if (new_obj_desc != obj_desc) { + acpi_ut_remove_reference (new_obj_desc); + } + + return_ACPI_STATUS (status); +} + + -- cgit 1.4.1