| Age | Commit message (Collapse) | Author |
|---|
|
commit 115d9d77bb0f9152c60b6e8646369fa7f6167593 upstream.
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream.
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ea25770b043c7997ab21d1ce95ba5de4d3d85d9 upstream.
This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71bdea6f798b425bc0003780b13e3fdecb16a010 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
non BPF mode
[ Upstream commit 54b353a20c7e8be98414754f5aff98c8a68fcc1f ]
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d656b0f81b22101db0447f890e39fdd736b745e ]
When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately. This is not how 'perf stat'
handles unsupported events.
Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:
Before:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Failed to open first cgroup events
$
After it shows output similat to when --bpf-counters isn't specified:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Performance counter stats for 'system wide':
<not supported> L1-icache-loads system.slice
29,892,418 L1-dcache-loads system.slice
<not supported> L1-icache-loads user.slice
52,497,220 L1-dcache-loads user.slice
$
Fixes: 944138f048f7d759 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
"__sched_text_end" symbol on s/390
[ Upstream commit d8d85ce86dc82de4f88b821a78f533b9d5b22a45 ]
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750d1de39 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a6564ebd953c4590663c9a3c99a3ea9920ade6f ]
In perf_data__open_dir(), opendir() opens the directory stream. Add
missing closedir() to release it after use.
Fixes: eb6176709b235b96 ("perf data: Add perf_data__open_dir_data function")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221229090903.1402395-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
arp_ndisc_evict_nocarrier
[ Upstream commit 1856628baa17032531916984808d1bdfd62700d4 ]
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c4d7f45d60745a1cea0e841fa5e3444c398d2f1 ]
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9dfc46c67b52ad43b8e335e28f4cf8002c67793 ]
DWARF version 5 standard Sec 2.14 says that
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: 3f4460a28fb2f73d ("perf probe: Filter out redundant inline-instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f828929ab7f0dc3353e4a617f94f297fa8f3dec3 ]
Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute
acccessor functions, so that it can find the specified attribute from
abstact origin DIE etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731051988.2100653.13595339994343449770.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a9dfc46c67b5 ("perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit de3ee3f63400a23954e7c1ad1cb8c20f29ab6fe3 upstream.
This change enables to extend CFLAGS and LDFLAGS from command line, e.g.
to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static
USERCFLAGS and USERLDFLAGS are documented in
Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst
This should be backported (down to 5.10) to improve previous kernel
versions testing as well.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef784eebb56425eed6e9b16e7d47e5c00dcf9c38 upstream.
After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.
With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.
Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26df05a8c1420ad3de314fdd407e7fc2058cc7aa upstream.
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit efb11fdb3e1a9f694fa12b70b21e69e55ec59c36 ]
find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-9-sv@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b50d691e50e600fab82b423be871860537d75dc9 ]
Parametrized events are not only a powerpc domain. They occur on other
platforms too (e.g. aarch64). They should be ignored in this testcase,
since proper setup of the parameters is out of scope of this script.
Let's not filter them out by PMU name, but rather based on the fact that
they expect a parameter.
Fixes: 451ed8058c69a3fe ("perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221219163008.9691-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b269b75551227796c1ddac2dbdb2ba504158c61 ]
Check the -q and -v options first to return earlier on error.
Before:
# perf probe -q -v test
probe-definition(0): test
symbol:test file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Error: -v and -q are exclusive.
After:
# perf probe -q -v test
Error: -v and -q are exclusive.
Fixes: 5e17b28f1e246b98 ("perf probe: Add --quiet option to suppress output result message")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20221220035702.188413-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a527c2c1e2d43e9f145f5d0c5d6ac0bdf5220e22 ]
Use the global quiet variable everywhere so that all tools hide warnings
in quiet mode and update the documentation to reflect this.
'perf probe' claimed that errors are not printed in quiet mode but I
don't see this so remove it from the docs.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 8b269b755512 ("perf probe: Check -v and -q options in the right place")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
values in perf_quiet_option()
[ Upstream commit 188ac720d364035008a54d249cf47b4cc100f819 ]
When perf uses quiet mode, perf_quiet_option() sets the 'debug_peo_args'
variable to -1, and display_attr() incorrectly determines the value of
'debug_peo_args'. As a result, unexpected information is displayed.
Before:
# perf record --quiet -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 128
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
...
After:
# perf record --quiet -- ls > /dev/null
#
redirect_to_stderr is a similar problem.
Fixes: f78eaef0e0493f60 ("perf tools: Allow to force redirect pr_debug to stderr.")
Fixes: ccd26741f5e6bdf2 ("perf tool: Provide an option to print perf_event_open args and return value")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: martin.lau@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220035702.188413-2-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab0350c743d5c93fd88742f02b3dff12168ab435 ]
Both tolower and toupper are built in c functions, we should not
redefine them as this can result in a build error.
Fixes the following errors:
progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
10 | static inline char tolower(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>'
4 | #include <bpf/bpf_helpers.h>
+++ |+#include <ctype.h>
5 |
progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch]
17 | static inline char toupper(char c)
| ^~~~~~~
progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>'
See background on this sort of issue:
https://stackoverflow.com/a/20582607
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213
(C99, 7.1.3p1) "All identifiers with external linkage in any of the
following subclauses (including the future library directions) are
always reserved for use as identifiers with external linkage."
This is documented behavior in GCC:
https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b42693415b86f608049cf1b4870adc1dc65e58b0 ]
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2fc60e2ff972d3dca836bff0b08cbe503c4ca1ce ]
$number + > bash means redirect FD $number, e.g. commonly
used 2> redirects stderr (fd 2). The test uses 8192> to
write the number 8192 to a file, this results in:
./devlink.sh: line 499: 8192: Bad file descriptor
Oddly the test also papers over this issue by checking
for failure (expecting an error rather than success)
so it passes, anyway.
Fixes: ff18176ad806 ("selftests: Add a test of large binary to devlink health test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8dfde09c90109e3a98af54847e91bde7dc2d5c2 ]
BPF selftests require CONFIG_FUNCTION_ERROR_INJECTION to work. However,
CONFIG_FUNCTION_ERROR_INJECTION is no longer 'y' by default after recent
changes. As a result, we are seeing errors like the following from BPF CI:
bpf_testmod_test_read() is not modifiable
__x64_sys_setdomainname is not sleepable
__x64_sys_getpgid is not sleepable
Fix this by explicitly selecting CONFIG_FUNCTION_ERROR_INJECTION in the
selftest config.
Fixes: a4412fdd49dc ("error-injection: Add prompt for function error injection")
Reported-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20221213220500.3427947-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c587e77e100fa40eb6af10e00497c67acf493f33 ]
The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too. This is not the intention, let's fix it.
Before:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
4,326,949,337 cycles
4.007494118 seconds time elapsed
real 0m7.474s
user 0m0.356s
sys 0m0.120s
It ran the workload for 4 seconds and gave the 3 second delay. So it
should skip the first 3 second and measure the last 1 second only. But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds. So the total time (real) was 7 seconds.
After:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
1,063,551,013 cycles
1.002769510 seconds time elapsed
real 0m4.484s
user 0m0.385s
sys 0m0.086s
The bug was introduced when it changed enablement of system-wide events
with a command line workload. But it should've considered the initial
delay case. The code was reworked since then (in bb8bc52e7578) so I'm
afraid it won't be applied cleanly.
Fixes: d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
'btf_trace_sched_switch'
[ Upstream commit 167b266bf66c5b93171011ef9d1f09b070c2c537 ]
In BTF, tracepoint definitions have the "btf_trace_" prefix. The
off-cpu profiler needs to check the signature of the sched_switch event
using that definition. But there's a typo (s/bpf/btf/) so it failed
always.
Fixes: b36888f71c8542cd ("perf record: Handle argument change in sched_switch")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221208182636.524139-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20ed9fa4965875fdde5bfd65d838465e38d46b22 ]
Commit 93315e46b000fc80 ("perf/core: Add speculation info to branch
entries") added a new field in between type and new_type. Perf has its
own copy of this struct so update it to match the kernel side.
This doesn't currently cause any issues because new_type is only used by
the Arm BRBE driver which isn't merged yet.
Committer notes:
Is this really an ABI? How are we supposed to deal with old perf.data
files with new tools and vice versa? :-\
Fixes: 93315e46b000fc80 ("perf/core: Add speculation info to branch entries")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20221130165158.517385-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f520ce17920b3cdfbd2479b3ccf27f9706219d0 ]
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03e9a5d8eb552a1bf692a9c8a5ecd50f4e428006 ]
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eadcab4c7a66e1df03d32da0db55d89fd9343fcc ]
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb55 ("perf trace: Handle failure when trace point folder is missed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4223e1776c30b2ce8d0e6eaadcbf696e60fca3c ]
When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4e55f88da923f39f0b76edc3da3c52d0b72d429 ]
The struct perf_stat_output_ctx is set in a loop with the same values.
Move the code out of the loop and keep the loop minimal.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: fdc7d6082459 ("perf stat: Fix --metric-only --json output")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93d5e700156e03e66eb1bf2158ba3b8a8b354c71 ]
In the stat-display code, it needs to check if the current evsel is
hybrid but it uses perf_pmu__has_hybrid() which can return true for
non-hybrid event too. I think it's better to use evsel__is_hybrid().
Also remove a NULL check for the 'config' parameter in the
hybrid_merge() since it's called after config->no_merge check.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221018020227.85905-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: fdc7d6082459 ("perf stat: Fix --metric-only --json output")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
warnings in quiet mode
[ Upstream commit 65319890c32db29fb56b41f84265a2c7029943f4 ]
Especially when CONFIG_LOCKDEP and other debug configs are enabled,
Perf can print the following warning when running the "kernel lock
contention analysis" test:
Warning:
Processed 1378918 events and lost 4 chunks!
Check IO/CPU overload!
Warning:
Processed 4593325 samples and lost 70.00%!
The test already supplies -q to run in quiet mode, so extend quiet mode
to perf_stdio__warning() and also ui__warning() for consistency.
This fixes the following failure due to the extra lines counted:
perf test "lock cont" -vvv
82: kernel lock contention analysis test :
--- start ---
test child forked, pid 3125
Testing perf lock record and perf lock contention
[Fail] Recorded result count is not 1: 9
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
Fixes: ec685de25b6718f8 ("perf test: Add kernel lock contention test")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa55ef14ef4fe06198c0ce811b603aec24134bc2 ]
strdup() allocates memory for path. We need to release the memory in the
following error path. Add free() to avoid memory leak.
Fixes: 8f184732b60b ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221206071906.806384-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d7cfb48d81353e826493d24c7cec7360950968f ]
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ac88eece8009428e2577c345080a458e4507e2f ]
Jiri reports broken test_progs after recent commit 68f8e3d4b916
("selftests/bpf: Make sure zero-len skbs aren't redirectable").
Apparently we don't remount debugfs when we switch back networking namespace.
Let's explicitly mount /sys/kernel/debug.
0: https://lore.kernel.org/bpf/63b85917-a2ea-8e35-620c-808560910819@meta.com/T/#ma66ca9c92e99eee0a25e40f422489b26ee0171c1
Fixes: a30338840fa5 ("selftests/bpf: Move open_netns() and close_netns() into network_helpers.c")
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221123200829.2226254-1-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68f8e3d4b916531ea3bb8b83e35138cf78f2fce5 ]
LWT_XMIT to test L3 case, TC to test L2 case.
v2:
- s/veth_ifindex/ipip_ifindex/ in two places (Martin)
- add comment about which condition triggers the rejection (Martin)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221121180340.1983627-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 8ac88eece800 ("selftests/bpf: Mount debugfs in setns_by_fd")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c453e64cbc9532c0c2edfa999c35d29dad16b8bb ]
kmemleak reports this issue:
unreferenced object 0xffff88810b7835c0 (size 32):
comm "test_progs", pid 270, jiffies 4294969007 (age 1621.315s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
03 00 00 00 03 00 00 00 0f 00 00 00 00 00 00 00 ................
backtrace:
[<00000000376cdeab>] kmalloc_trace+0x27/0x110
[<000000003bcdb3b6>] selinux_sk_alloc_security+0x66/0x110
[<000000003959008f>] security_sk_alloc+0x47/0x80
[<00000000e7bc6668>] sk_prot_alloc+0xbd/0x1a0
[<0000000002d6343a>] sk_alloc+0x3b/0x940
[<000000009812a46d>] unix_create1+0x8f/0x3d0
[<000000005ed0976b>] unix_create+0xa1/0x150
[<0000000086a1d27f>] __sock_create+0x233/0x4a0
[<00000000cffe3a73>] __sys_socket_create.part.0+0xaa/0x110
[<0000000007c63f20>] __sys_socket+0x49/0xf0
[<00000000b08753c8>] __x64_sys_socket+0x42/0x50
[<00000000b56e26b3>] do_syscall_64+0x3b/0x90
[<000000009b4871b8>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
unix_create1()
sk_alloc()
sk_prot_alloc()
security_sk_alloc()
call_int_hook()
hlist_for_each_entry()
entry1->hook.sk_alloc_security
<-- selinux_sk_alloc_security() succeeded,
<-- sk->security alloced here.
entry2->hook.sk_alloc_security
<-- bpf_lsm_sk_alloc_security() failed
goto out_free;
... <-- the sk->security not freed, memleak
The core problem is that the LSM is not yet fully stacked (work is
actively going on in this space) which means that some LSM hooks do
not support multiple LSMs at the same time. To fix, skip the
"EPERM" test when it runs in the environments that already have
non-bpf lsms installed
Fixes: dca85aac8895 ("selftests/bpf: lsm_cgroup functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Stanislav Fomichev <sdf@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/1668482980-16163-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52929912d7bda040b43538e8d88e8d231b76eb4e ]
This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.
Fixes: 3082f8cd4ba3 ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107230420.4192307-3-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4c9cf0ce8c413c2030e8fb215551d7e0582ee7b ]
xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:
xdp_synproxy.c: In function 'parse_options':
xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
175 | *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
| ^~
xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
289 | .map_ids = (__u64)map_ids,
| ^
Fix it.
Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221111030836.37632-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3c51fe02c55bd944662714e5b91b96dc271ad9f ]
When examining module BTF, it is common to see core kernel structures
such as sk_buff, net_device duplicated in the module. After adding
debug messaging to BTF it turned out that much of the problem
was down to the identical struct test failing during deduplication;
sometimes the compiler adds identical structs. However
it turns out sometimes that type ids of identical struct members
can also differ, even when the containing structs are still identical.
To take an example, for struct sk_buff, debug messaging revealed
that the identical struct matching was failing for the anon
struct "headers"; specifically for the first field:
__u8 __pkt_type_offset[0]; /* 128 0 */
Looking at the code in BTF deduplication, we have code that guards
against the possibility of identical struct definitions, down to
type ids, and identical array definitions. However in this case
we have a struct which is being defined twice but does not have
identical type ids since each duplicate struct has separate type
ids for the above array member. A similar problem (though not
observed) could occur for struct-in-struct.
The solution is to make the "identical struct" test check members
not just for matching ids, but to also check if they in turn are
identical structs or arrays.
The results of doing this are quite dramatic (for some modules
at least); I see the number of type ids drop from around 10000
to just over 1000 in one module for example.
For testing use latest pahole or apply [1], otherwise dedups
can fail for the reasons described there.
Also fix return type of btf_dedup_identical_arrays() as
suggested by Andrii to match boolean return type used
elsewhere.
Fixes: efdd3eb8015e ("libbpf: Accommodate DWARF/compiler bug with duplicated structs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1666622309-22289-1-git-send-email-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/1666364523-9648-1-git-send-email-alan.maguire
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98af3746026c3eccb51b43181c41e001fe73f7af ]
After commit afef88e65554 ("selftests/bpf: Store BPF object files with
.bpf.o extension"), we should use *.bpf.o instead of *.o.
In addition, use the BPF_FILE variable to save the BPF object file name,
which can be better identified and modified.
Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/1666235134-562-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0d382f95a9270dcf803539d6781d6bd67e3f5b2 ]
When there are no program sections, obj->programs is left unallocated,
and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL,
and will cause null-pointer dereference in the following access to
prog->sec_idx.
Guard the search with obj->nr_programs similar to what's being done in
__bpf_program__iter() to prevent null-pointer access from happening.
Fixes: db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35a855509e6ee3442477c8ebc6827b5b5d32a7b5 ]
ELF section data pointer returned by libelf may be NULL (if section has
SHT_NOBITS), so null check section data pointer before attempting to
copy license and kversion section.
Fixes: cb1e5e961991 ("bpf tools: Collect version and license from ELF sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-3-shung-hsi.yu@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 51deedc9b8680953437dfe359e5268120de10e30 ]
This commit replace e_shnum with the elf_getshdrnum() helper to fix two
oss-fuzz-reported heap-buffer overflow in __bpf_object__open. Both
reports are incorrectly marked as fixed and while still being
reproducible in the latest libbpf.
# clusterfuzz-testcase-minimized-bpf-object-fuzzer-5747922482888704
libbpf: loading object 'fuzz-object' from buffer
libbpf: sec_cnt is 0
libbpf: elf: section(1) .data, size 0, link 538976288, flags 2020202020202020, type=2
libbpf: elf: section(2) .data, size 32, link 538976288, flags 202020202020ff20, type=1
=================================================================
==13==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000000c0 at pc 0x0000005a7b46 bp 0x7ffd12214af0 sp 0x7ffd12214ae8
WRITE of size 4 at 0x6020000000c0 thread T0
SCARINESS: 46 (4-byte-write-heap-buffer-overflow-far-from-bounds)
#0 0x5a7b45 in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3414:24
#1 0x5733c0 in bpf_object_open /src/libbpf/src/libbpf.c:7223:16
#2 0x5739fd in bpf_object__open_mem /src/libbpf/src/libbpf.c:7263:20
...
The issue lie in libbpf's direct use of e_shnum field in ELF header as
the section header count. Where as libelf implemented an extra logic
that, when e_shnum == 0 && e_shoff != 0, will use sh_size member of the
initial section header as the real section header count (part of ELF
spec to accommodate situation where section header counter is larger
than SHN_LORESERVE).
The above inconsistency lead to libbpf writing into a zero-entry calloc
area. So intead of using e_shnum directly, use the elf_getshdrnum()
helper provided by libelf to retrieve the section header counter into
sec_cnt.
Fixes: 0d6988e16a12 ("libbpf: Fix section counting logic")
Fixes: 25bbbd7a444b ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40868
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40957
Link: https://lore.kernel.org/bpf/20221012022353.7350-2-shung-hsi.yu@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbc1c998da59687e8bbc4667154a72eead2daf2d ]
xdp_adjust_tail.c calls ASSERT_OK() to check the return value of
bpf_prog_test_load(), but the condition is not correct. Fix it.
Fixes: 791cad025051 ("bpf: selftests: Get rid of CHECK macro in xdp_adjust_tail.c")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-7-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4abdb1d5b250df4b5b3afd394d5e2fa516064c04 ]
test_xdp_adjust_tail_grow failed with ipv6:
test_xdp_adjust_tail_grow:FAIL:ipv6 unexpected error: -28 (errno 28)
The reason is that this test case tests ipv4 before ipv6, and when ipv4
test finished, topts.data_size_out was set to 54, which is smaller than the
ipv6 output data size 114, so ipv6 test fails with NOSPC error.
Fix it by reset topts.data_size_out to sizeof(buf) before testing ipv6.
Fixes: 04fcb5f9a104 ("selftests/bpf: Migrate from bpf_prog_test_run")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-6-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d2e21dc4db3933db65293552ecc1ede26febeca ]
The get_syms() function in kprobe_multi_test.c does not free the string
memory allocated by sscanf correctly. Fix it.
Fixes: 5b6c7e5c4434 ("selftests/bpf: Add attach bench test")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-5-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|