summary refs log tree commit diff
path: root/sound
AgeCommit message (Collapse)Author
2011-11-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda/realtek - Skip invalid digital out pins ALSA: hda/sigmatel - Automatically retrieve digital I/O widgets ALSA: hda - Remove unused variables ALSA: hda/realtek - Don't create alt-stream for capture when unnecessary ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default ALSA: hda - Check NO_PRESENCE pincfg default bit ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK ASoC: Ensure the WM8962 oscillator and PLLs start up disabled ASoC: Ensure WM8962 PLL registers are reset ALSA: intel8x0 - Fix inclusion of kvm_para.h ALSA: hda_hwdep: Fix possible buffer overflow ASoC: Fix return value of wm5100_gpio_direction_out() ASoC: WM8904: Set `invert' bit for Capture Switch ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt ASoC: wm8711: Fix wrong mask for setting input audio data bit length select ALSA: intel8x0: Improve performance in virtual environment ALSA: hdspm - Enable all firmware ranges for PCI MADI/AES cards ALSA: hdsp - Correct HDSP_VERSION_BIT constant, thus partly fixing RPM detection ALSA: hdspm - Fix MADI channel format in the status ioctl ...
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-03Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-11-03ALSA: hda/realtek - Skip invalid digital out pinsTakashi Iwai
Some BIOS report invalid pins as digital output pins. The driver checks the connection but it doesn't do it fully correctly, and it leaves some undefined value as the audio-out widget, which makes the driver spewing warnings. This patch fixes the issue. Reference: https://bugzilla.novell.com/show_bug.cgi?id=727348 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-03ALSA: hda/sigmatel - Automatically retrieve digital I/O widgetsCharles Chin
Revise stac92xx_parse_auto_config to automatically scan for digital input and output converters. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Remove unused variablesTakashi Iwai
Just clean-up what GCC caught. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda/realtek - Don't create alt-stream for capture when unnecessaryTakashi Iwai
When the driver finds multiple ADCs, it tries to create an alternative capture PCM stream. However, these secondary ADCs might be useless or in uncontrolled paths in some cases, e.g. when auto-mic or dynamic ADC-switching is enabled. Also, when only a single capture source is available, the multi-streams don't make sense, too. With this patch, the driver checks such condition and skips the alt stream appropriately. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02um: switch to use of drivers/KconfigAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02ALSA: hda - Add support for 92HD65 / 92HD66 family of codecsCharles Chin
These codecs have SPDIF-in, which is new to the 92HD83xxx compatible families, so a bit of logic is added to support them. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Disable power-widget control for IDT 92HD83/93 as defaultCharles Chin
The power-widget control in patch_stac92hd83xxx() never worked properly, thus it's safer to turn it off as default for now. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-02ALSA: hda - Check NO_PRESENCE pincfg default bitTakashi Iwai
HD-audio spec defines a bit in pin default configuration for indicating that the pin isn't used for jack-detection although the codec is capable of it. Better to check this bit as well in jack_is_detectable() helper function. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLKMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ASoC: Ensure the WM8962 oscillator and PLLs start up disabledMark Brown
Since there is no current software control for these they would otherwise be left enabled, consuming power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ASoC: Ensure WM8962 PLL registers are resetMark Brown
The WM8962 has a separate software reset for the PLL registers. Ensure that these are reset also on startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-01ALSA: intel8x0 - Fix inclusion of kvm_para.hTakashi Iwai
<linux/kvm_para.h> should be included instead of <asm/...> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-01ALSA: hda_hwdep: Fix possible buffer overflowAlexander Stein
If a line in the firmware file is larger than the given buffer size (and so the firmware file size), size is set to a value larger than the actual buffer size. This results in an overflow in the buffer passed. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31treewide: use __printf not __attribute__((format(printf,...)))Joe Perches
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31ASoC: Fix return value of wm5100_gpio_direction_out()Mark Brown
We can't just pass back the return value of snd_soc_update_bits() as it will be 1 if a bit changed rather than zero. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-31ASoC: WM8904: Set `invert' bit for Capture SwitchHong Xu
Set `invert' bit for Capture Switch. Otherwise analogue is muted when Capture Switch is ON. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-31ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmtAxel Lin
Current implementation in wm8711_set_dai_fmt always clear BIT[3:2] (the Input Audio Data Bit Length Select) of WM8711_IFACE(07h) register. Input Audio Data Bit Length Select bits are set by wm8711_hw_params, we should leave BIT[3:2] untouched in wm8711_set_dai_fmt. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-31ASoC: wm8711: Fix wrong mask for setting input audio data bit length selectAxel Lin
The Input Audio Data Bit Length Select is controlled by BIT[3:2] of WM8711_IFACE(07h) register. Current code incorrectly masks BIT[1:0] which is for Audio Data Format Select. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-31ALSA: intel8x0: Improve performance in virtual environmentKonstantin Ozerkov
v3: detection code is x86 and KVM specific, hide it under ifdef v2: add detection for virtual environments (KVM and Parallels) This patch is intended to improve performance in virtualized environments like Parallels Desktop or KVM/VirtualBox/QEMU (virtual ICH/AC97 audio). I/O access is very time-expensive operation in virtual world: VCPU can be rescheduled and in the worst case we get more than 10ms delay on each I/O access. In the virtual environment loop exit rule (old_civ == current_civ && old_picb == current_picb) is never satisfied, because old_picb is never the same as current_picb due to delay inspired by reading current_civ. As a result loop ended by timeout and we get 10x more I/O operations. Experimental data from Prallels Desktop 7, RHEL6 guest (I/O ops per second): Original code: In Port Counter Callback f014 41550 fffff00000179d00 ac97_bm_read_civ+0x000 f018 41387 fffff0000017a580 ac97_bm_read_picb+0x000 With patch: In Port Counter Callback f014 4090 fffff00000179d00 ac97_bm_read_civ+0x000 f018 1964 fffff0000017a580 ac97_bm_read_picb+0x000 Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hdspm - Enable all firmware ranges for PCI MADI/AES cardsAdrian Knoth
From the Windows INF file, we know the firmware ranges for all RME cards. For PCIe, a single revision ID per device (RayDAT, MADI, AIO, AES) is used. Contrary, the older PCI versions use ranges, that is, one revision ID per firmware version. Instead of listing all possible revisions individually, match the range. This commit enables all MADI and AES PCI versions ever shipped. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hdsp - Correct HDSP_VERSION_BIT constant, thus partly fixing RPM detectionAdrian Knoth
HDSP_VERSION_BIT has to be ORed with HDSP_S_LOAD. This fixes the detection of at least some RME RPM boxes. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hdspm - Fix MADI channel format in the status ioctlAdrian Knoth
SNDRV_HDSPM_IOCTL_GET_STATUS is supposed to query the current card status, so we have to return what we receive on the MADI wire (RX), not what we transmit (TX) to others. The latter is a config item to be queried via SNDRV_HDSPM_IOCTL_GET_CONFIG. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31ALSA: hwdep: silence integer overflow warningDan Carpenter
Smatch complains that if device is INT_MAX then device + 1 can overflow. It just means we would have an annoying loop while we check all the devices from -2147483648 to SNDRV_MINOR_HWDEPS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-27Merge branch 'topic/hda' into for-linusTakashi Iwai
2011-10-27ALSA: hda - Fix ADC input-amp handling for Cx20549 codecTakashi Iwai
It seems that Conexant CX20549 chip handle only a single input-amp even though the audio-input widget has multiple sources. This has been never clear, and I implemented in the current way based on the debug information I got at the early time -- the device reacts individual input-amp values for different sources. This is true for another Conexant codec, but it's not applied to CX20549 actually. This patch changes the auto-parser code to handle a single input-amp per audio-in widget for CX20549. After applying this, you'll see only a single "Capture" volume control instead of separate "Mic" or "Line" captures when the device is set up to use a single ADC. We haven't tested 20551 and 20561 codecs yet. If these show the similar behavior like 20549, they need to set spec->single_adc_amp=1, too. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27ALSA: hda - Keep EAPD turned on for old Conexant chipsTakashi Iwai
In the old Conexant chips (5045, 5047, 5051 and 5066), a single EAPD may handle both headphone and speaker outputs while it's assigned only to one of them. Turning off dynamically leads to the unexpected silent output in such a configuration with the auto-mute function. Since it's difficult to know how the EAPD is handled in the actual h/w implementation, better to keep EAPD on while running for such codecs. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27ALSA: hda/realtek - Fix missing volume controls with ALC260Takashi Iwai
ALC260 has multiple mixer widgets connected to the shared DAC, but the driver currently doesn't check this possibility and ignores when the DAC is shared with others. This resulted in the silent output from some routes because of lack of the amp setup. This patch adds the workaround for it by checking the route even with the shared DAC, but also checking the conflict with the existing control for the very same widget NID. Reference: https://bugzilla.novell.com/show_bug.cgi?id=726812 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-27ASoC: tlv320aic3x: Clear BIT_CLK_MASTER and WORD_CLK_MASTER bits for for ↵Axel Lin
slave mode According to the datasheet: Page0 / Register8: Audio Serial Data interface Control Register A BIT 7: Bit Clock Directional Control 0: Bit clock is an input (slave mode) 1: Bit clock is an output (master mode) BIT 6: Word Clock Directional Control 0: Word clock is an input (slave mode) 1: Word clock is an output (master mode) Current code sets BIT_CLK_MASTER and WORD_CLK_MASTER bits for master mode, but does not clear these bits for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27ASoC: tlv320aic23: Clear TLV320AIC23_MS_MASTER bit for slave modeAxel Lin
According to the datasheet: Digital Audio Interface Format (07h) register: BIT6: Master/slave mode 0: Slave 1: Master Current code sets TLV320AIC23_MS_MASTER bit for master mode, but does not clear it for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27ASoC: wm8940: Fix mask for setting BCLKDIVAxel Lin
According to the datasheet: BCLK is controlled by BIT[4:2] of WM8940_CLOCK(06h) register. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-10-27ASoC: wm8940: Properly set codec->dapm.bias_levelAxel Lin
Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-10-26Merge branch 'topic/remove-irqf_disable' into for-linusTakashi Iwai
2011-10-26Merge branch 'topic/misc' into for-linusTakashi Iwai
2011-10-26ALSA: hda - Fix pin-config for ASUS W90VTakashi Iwai
The association numbers of surround/CLFE speaker pins aren't correctly mapped by the auto-parser. This patch fixes the CLFE speaker pin to the right assoc value (from 3 to 1). Tested-by: Nika Topolchanskaya <nanodesuu@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-26ALSA: hda - Fix surround/CLFE headphone and speaker pins orderTakashi Iwai
When 5.1 or more headphone or speaker pins are provided, the parser still takes as is without fixing the order of channel mapping, which leads in the unexpected strange channel order by surround outputs. This patch fixes the issue by applying the same fix-up not only to line_out_pins[] but also hp_pins[] and speaker_pins[]. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24ALSA: HDA: Add new revision for ALC662David Henningsson
The revision 0x100300 was found for ALC662. It seems to work well with patch_alc662. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/877373 Tested-by: Shengyao Xue <Shengyao.xue@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-22ASoC: max98095: Convert codec->hw_write to snd_soc_writeAxel Lin
codec->hw_write is broken now, convert codec->hw_write to snd_soc_write. The hardware has 2 banks of registers sharing a section in I2C register space. The 1st bank is the primary one and is cached. The 2nd bank is for loading coefficients only and they do not need cache. These coefficients registers are therefore direct writes. Thus we set cache_bypass flag to deal with this before calling snd_soc_write. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: keep pointer to resource so it can be freedJulia Lawall
Add a new variable for storing resources accessed subsequent to the one accessed using request_mem_region, so the one accessed using request_mem_region can be released if needed. The resource variable names are also changed to be more descriptive. This code is also missing some calls to iounmap. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits callsAxel Lin
Ensure all mask bits are clear before setting new value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-22ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-22ASoC: da7210: Add support for line out and DACAshish Chavan
DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono). This patch adds support for gain controls for these three line outs. It also adds support for overall DAC gain control. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-17 06:18:04 +0000