summary refs log tree commit diff
path: root/include
AgeCommit message (Collapse)Author
2023-11-22Revert "PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device" 6.1.52-valve8-no-drdAndres Rodriguez
This reverts commit a4904c47fcd7fc9152b6b04409feac1130e2033d. This results in some USB devices to fail to enumerate. Revert pending further investigation.
2023-11-02wifi: cfg80211: save Power Spectral Density (PSD) of the regulatory ruleWen Gong
6 GHz regulatory domains introduces Power Spectral Density (PSD). The PSD value of the regulatory rule should be taken into effect for the ieee80211_channels falling into that particular regulatory rule. Save the values in the channel which has PSD value and add nl80211 attributes accordingly to handle it. Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Co-developed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
2023-11-02wifi: cfg80211: BACKPORT: call reg_notifier for self managed wiphy from ↵Wen Gong
driver hint Currently the regulatory driver does not call the regulatory callback reg_notifier for self managed wiphys. Sometimes driver needs cfg80211 to calculate the info of ieee80211_channel such as flags and power, and driver needs to get the info of ieee80211_channel after hint of driver, but driver does not know when calculation of the info of ieee80211_channel become finished, so add notify to driver in reg_process_self_managed_hint() from cfg80211 is a good way, then driver could get the correct info in callback of reg_notifier. Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-02Subject: [PATCH 24/42] wifi: mac80211: Add VHT MU-MIMO related flags in ↵neil.shi
ieee80211_bss_conf Adding flags for SU Beamformer, SU Beamformee, MU Beamformer and MU Beamformee for VHT. This is utilized to pass MU-MIMO configurations from user space to driver in AP mode. Signed-off-by: neil.shi <neil.shi@quectel.com>
2023-11-02Subject: [PATCH 17/42] wifi: ath11k: push MU-MIMO params from hostapd to ↵neil.shi
hardware In the previous behaviour only HE IE in management frames are changed regarding MU-MIMO configurations and not in hardware. Adding push of MU-MIMO configurations to the hardware as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Signed-off-by: neil.shi <neil.shi@quectel.com>
2023-11-02USB: Extend pci resume function to handle PM eventsPierre-Loup A. Griffais
Currently, the pci_resume method has only a flag indicating whether the system is resuming from hibernation. In order to handle all PM events like AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM events. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02Added in Quectel patches for bluetoothChristian Marcheselli
2023-09-15Merge branch 6.1/features/amd-color-mgmtCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/hidCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/tcp-timewaitCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/quirksCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/gpu-resetCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/cirrus-shared-boostCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/amd-drm-extraCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-15Merge branch 6.1/features/acpiCristian Ciocaltea
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-11ACPI: utils: Make acpi_handle_list dynamically allocatedVicki Pfau
This fixes a long-standing "TBD" comment in the ACPI headers regarding making the acpi_handle_list struct's size dynamic. The number 10, which along with the comment dates back to 2.4.23, seems like it may have been arbitrarily chosen, and isn't sufficient in all cases. This patch finally makes the size dynamic and updates its users to handle the modified API. Signed-off-by: Vicki Pfau <vi@endrift.com> (cherry picked from commit e4efc98ccb538204b344c64a419a601e3f50e79e) Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-11PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD deviceVicki Pfau
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform. A quirk was previously added to let the dwc3 driver claim the device since it provides more specific support. This commit extends that quirk to include the equivalent PID for the VanGogh SoC. Signed-off-by: Vicki Pfau <vi@endrift.com> (cherry picked from commit ca73d16a680ceadfba501f75e6ffc922fc5c7a19) Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-11mmc: core: add safe_trim_quirk attributeAndres Rodriguez
This attribute is intended to be used by userspace tools to identify if trimming a device is safe or not. It helps in cases where a userspace tool is aware of the necessity of the quirk and a user accidentally downgrades their kernel to a one that doesn't have support for the quirk. Signed-off-by: Andres Rodriguez <andresx7@gmail.com> (cherry picked from commit dfc5952c55f58d0e0863ccba0aa598fdae16ed14) Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-08Merge tag 'v6.1.52' into 6.1/features/merge-fixesCristian Ciocaltea
Fix conflicts: drivers/gpu/drm/amd/amdgpu/amdgpu.h drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.h drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c drivers/gpu/drm/amd/display/dc/core/dc.c drivers/gpu/drm/amd/display/dc/core/dc_link.c drivers/gpu/drm/amd/display/dc/core/dc_resource.c drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.h drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c drivers/gpu/drm/amd/display/dc/dcn321/dcn321_resource.c drivers/gpu/drm/amd/display/dc/inc/core_types.h drivers/gpu/drm/amd/pm/powerplay/inc/hwmgr.h drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c drivers/thunderbolt/quirks.c Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
2023-09-06usb: typec: tcpci: clear the fault status bitMarco Felsch
commit 23e60c8daf5ec2ab1b731310761b668745fcf6ed upstream. According the "USB Type-C Port Controller Interface Specification v2.0" the TCPC sets the fault status register bit-7 (AllRegistersResetToDefault) once the registers have been reset to their default values. This triggers an alert(-irq) on PTN5110 devices albeit we do mask the fault-irq, which may cause a kernel hang. Fix this generically by writing a one to the corresponding bit-7. Cc: stable@vger.kernel.org Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca> Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/ Reported-by: Christian Bach <christian.bach@scs.ch> Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/ Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02module: Expose module_init_layout_section()James Morse
commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream. module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised. arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation. Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs. Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194 Instead of duplicating module_init_layout_section()s logic, expose it. Reported-by: Adam Johnston <adam.johnston@arm.com> Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'Biju Das
[ Upstream commit 2746f13f6f1df7999001d6595b16f789ecc28ad1 ] The COMMON_CLK config is not enabled in some of the architectures. This causes below build issues: pwm-rz-mtu3.c:(.text+0x114): undefined reference to `clk_rate_exclusive_put' pwm-rz-mtu3.c:(.text+0x32c): undefined reference to `clk_rate_exclusive_get' Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK code block, as clk.c is enabled by COMMON_CLK. Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30scsi: core: raid_class: Remove raid_component_add()Zhu Wang
commit 60c5fd2e8f3c42a5abc565ba9876ead1da5ad2b7 upstream. The raid_component_add() function was added to the kernel tree via patch "[SCSI] embryonic RAID class" (2005). Remove this function since it never has had any callers in the Linux kernel. And also raid_component_release() is only used in raid_component_add(), so it is also removed. Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30madvise:madvise_free_pte_range(): don't use mapcount() against large folio ↵Yin Fengwei
for sharing check commit 0e0e9bd5f7b9d40fd03b70092367247d52da1db0 upstream. Commit 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a folio") replaced the page_mapcount() with folio_mapcount() to check whether the folio is shared by other mapping. It's not correct for large folios. folio_mapcount() returns the total mapcount of large folio which is not suitable to detect whether the folio is shared. Use folio_estimated_sharers() which returns a estimated number of shares. That means it's not 100% correct. It should be OK for madvise case here. User-visible effects is that the THP is skipped when user call madvise. But the correct behavior is THP should be split and processed then. NOTE: this change is a temporary fix to reduce the user-visible effects before the long term fix from David is ready. Link: https://lkml.kernel.org/r/20230808020917.2230692-4-fengwei.yin@intel.com Fixes: 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a folio") Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Reviewed-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30cgroup/cpuset: Free DL BW in case can_attach() failsDietmar Eggemann
commit 2ef269ef1ac006acf974793d975539244d77b28f upstream. cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks have been checked. DL BW is not allocated per-task but as a sum over all DL tasks migrating. If multiple controllers are attached to the cgroup next to the cpuset controller a non-cpuset can_attach() can fail. In this case free DL BW in cpuset_cancel_attach(). Finally, update cpuset DL task count (nr_deadline_tasks) only in cpuset_attach(). Suggested-by: Waiman Long <longman@redhat.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/deadline: Create DL BW alloc, free & check overflow interfaceDietmar Eggemann
commit 85989106feb734437e2d598b639991b9185a43a6 upstream. While moving a set of tasks between exclusive cpusets, cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for DL BW overflow checking and per-task DL BW allocation on the destination root_domain for the DL tasks in this set. This approach has the issue of not freeing already allocated DL BW in the following error cases: (1) The set of tasks includes multiple DL tasks and DL BW overflow checking fails for one of the subsequent DL tasks. (2) Another controller next to the cpuset controller which is attached to the same cgroup fails in its can_attach(). To address this problem rework dl_cpu_busy(): (1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a dedicated dl_bw_free(). (2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of a `struct task_struct *p` used in dl_cpu_busy(). This allows to allocate DL BW for a set of tasks too rather than only for a single task. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Keep track of SCHED_DEADLINE task in cpusetsJuri Lelli
commit 6c24849f5515e4966d94fa5279bdff4acf2e9489 upstream. Qais reported that iterating over all tasks when rebuilding root domains for finding out which ones are DEADLINE and need their bandwidth correctly restored on such root domains can be a costly operation (10+ ms delays on suspend-resume). To fix the problem keep track of the number of DEADLINE tasks belonging to each cpuset and then use this information (followup patch) to only perform the above iteration if DEADLINE tasks are actually present in the cpuset for which a corresponding root domain is being rebuilt. Reported-by: Qais Yousef (Google) <qyousef@layalina.io> Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/ Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Bring back cpuset_mutexJuri Lelli
commit 111cd11bbc54850f24191c52ff217da88a5e639b upstream. Turns out percpu_cpuset_rwsem - commit 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea, as it has been reported to cause slowdowns in workloads that need to change cpuset configuration frequently and it is also not implementing priority inheritance (which causes troubles with realtime workloads). Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it only for SCHED_DEADLINE tasks (other policies don't care about stable cpusets anyway). Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Conflict in kernel/cgroup/cpuset.c due to pulling new code/comments. Reject all new code. Remove BUG_ON() about rwsem that doesn't exist on mainline. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30nfs: use vfs setgid helperChristian Brauner
commit 4f704d9a8352f5c0a8fcdb6213b934630342bd44 upstream. We've aligned setgid behavior over multiple kernel releases. The details can be found in the following two merge messages: cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2') 426b4ca2d6a5 ("Merge tag 'fs.setgid.v6.0') Consistent setgid stripping behavior is now encapsulated in the setattr_should_drop_sgid() helper which is used by all filesystems that strip setgid bits outside of vfs proper. Switch nfs to rely on this helper as well. Without this patch the setgid stripping tests in xfstests will fail. Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Message-Id: <20230313-fs-nfs-setgid-v2-1-9a59f436cfc0@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> [ Harshit: backport to 6.1.y: fs/internal.h -- minor conflict due to code change differences. include/linux/fs.h -- Used struct user_namespace *mnt_userns instead of struct mnt_idmap *idmap fs/nfs/inode.c -- Used init_user_ns instead of nop_mnt_idmap ] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30drm/display/dp: Fix the DP DSC Receiver cap sizeAnkit Nautiyal
commit 5ad1ab30ac0809d2963ddcf39ac34317a24a2f17 upstream. DP DSC Receiver Capabilities are exposed via DPCD 60h-6Fh. Fix the DSC RECEIVER CAP SIZE accordingly. Fixes: ffddc4363c28 ("drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818044436.177806-1-ankit.k.nautiyal@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via ↵David Hildenbrand
GUP-fast commit 5805192c7b7257d290474cb1a3897d0567281bbc upstream. In contrast to most other GUP code, GUP-fast common page table walking code like gup_pte_range() also handles hugetlb pages. But in contrast to other hugetlb page table walking code, it does not look at the hugetlb PTE abstraction whereby we have only a single logical hugetlb PTE per hugetlb page, even when using multiple cont-PTEs underneath -- which is for example what huge_ptep_get() abstracts. So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast might stumble over a PTE that does not map the head page of a hugetlb page -- not the first "head" PTE of such a cont mapping. Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we might end up calling gup_must_unshare() with a tail page of a hugetlb page. We only maintain a single PageAnonExclusive flag per hugetlb page (as hugetlb pages cannot get partially COW-shared), stored for the head page. That flag is clear for all tail pages. So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail page of a hugetlb page: 1) With CONFIG_DEBUG_VM_PGFLAGS Stumbles over the: VM_BUG_ON_PGFLAGS(PageHuge(page) && !PageHead(page), page); For example, when executing the COW selftests with 64k hugetlb pages on arm64: [ 61.082187] page:00000000829819ff refcount:3 mapcount:1 mapping:0000000000000000 index:0x1 pfn:0x11ee11 [ 61.082842] head:0000000080f79bf7 order:4 entire_mapcount:1 nr_pages_mapped:0 pincount:2 [ 61.083384] anon flags: 0x17ffff80003000e(referenced|uptodate|dirty|head|mappedtodisk|node=0|zone=2|lastcpupid=0xfffff) [ 61.084101] page_type: 0xffffffff() [ 61.084332] raw: 017ffff800000000 fffffc00037b8401 0000000000000402 0000000200000000 [ 61.084840] raw: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 [ 61.085359] head: 017ffff80003000e ffffd9e95b09b788 ffffd9e95b09b788 ffff0007ff63cf71 [ 61.085885] head: 0000000000000000 0000000000000002 00000003ffffffff 0000000000000000 [ 61.086415] page dumped because: VM_BUG_ON_PAGE(PageHuge(page) && !PageHead(page)) [ 61.086914] ------------[ cut here ]------------ [ 61.087220] kernel BUG at include/linux/page-flags.h:990! [ 61.087591] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 61.087999] Modules linked in: ... [ 61.089404] CPU: 0 PID: 4612 Comm: cow Kdump: loaded Not tainted 6.5.0-rc4+ #3 [ 61.089917] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 61.090409] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 61.090897] pc : gup_must_unshare.part.0+0x64/0x98 [ 61.091242] lr : gup_must_unshare.part.0+0x64/0x98 [ 61.091592] sp : ffff8000825eb940 [ 61.091826] x29: ffff8000825eb940 x28: 0000000000000000 x27: fffffc00037b8440 [ 61.092329] x26: 0400000000000001 x25: 0000000000080101 x24: 0000000000080000 [ 61.092835] x23: 0000000000080100 x22: ffff0000cffb9588 x21: ffff0000c8ec6b58 [ 61.093341] x20: 0000ffffad6b1000 x19: fffffc00037b8440 x18: ffffffffffffffff [ 61.093850] x17: 2864616548656761 x16: 5021202626202965 x15: 6761702865677548 [ 61.094358] x14: 6567615028454741 x13: 2929656761702864 x12: 6165486567615021 [ 61.094858] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffd9e958b7a1c0 [ 61.095359] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8 [ 61.095873] x5 : ffff0008bb19e708 x4 : 0000000000000000 x3 : 0000000000000000 [ 61.096380] x2 : 0000000000000000 x1 : ffff0000cf6636c0 x0 : 0000000000000046 [ 61.096894] Call trace: [ 61.097080] gup_must_unshare.part.0+0x64/0x98 [ 61.097392] gup_pte_range+0x3a8/0x3f0 [ 61.097662] gup_pgd_range+0x1ec/0x280 [ 61.097942] lockless_pages_from_mm+0x64/0x1a0 [ 61.098258] internal_get_user_pages_fast+0xe4/0x1d0 [ 61.098612] pin_user_pages_fast+0x58/0x78 [ 61.098917] pin_longterm_test_start+0xf4/0x2b8 [ 61.099243] gup_test_ioctl+0x170/0x3b0 [ 61.099528] __arm64_sys_ioctl+0xa8/0xf0 [ 61.099822] invoke_syscall.constprop.0+0x7c/0xd0 [ 61.100160] el0_svc_common.constprop.0+0xe8/0x100 [ 61.100500] do_el0_svc+0x38/0xa0 [ 61.100736] el0_svc+0x3c/0x198 [ 61.100971] el0t_64_sync_handler+0x134/0x150 [ 61.101280] el0t_64_sync+0x17c/0x180 [ 61.101543] Code: aa1303e0 f00074c1 912b0021 97fffeb2 (d4210000) 2) Without CONFIG_DEBUG_VM_PGFLAGS Always detects "not exclusive" for passed tail pages and refuses to PIN the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback to ordinary GUP. As ordinary GUP properly considers the logical hugetlb PTE abstraction in hugetlb_follow_page_mask(), pinning the page will succeed when looking at the PageAnonExclusive on the head page only. So the only real effect of this is that with cont-PTE hugetlb pages, we'll always fallback from GUP-fast to ordinary GUP when not working on the head page, which ends up checking the head page and do the right thing. Consequently, the cow selftests pass with cont-PTE hugetlb pages as well without CONFIG_DEBUG_VM_PGFLAGS. Note that this only applies to anon hugetlb pages that are mapped using cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel. ... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into the page table R/O using GUP-fast. On production kernels (and even most debug kernels, that don't set CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required to be backported. But of course, it does not hurt. Link: https://lkml.kernel.org/r/20230805101256.87306-1-david@redhat.com Fixes: a7f226604170 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warningPing-Ke Shih
commit b98c16107cc1647242abbd11f234c05a3a5864f6 upstream. The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions") added reorder_buf_filtered to mark frames filtered by firmware, and it can only work correctly if hw.max_rx_aggregation_subframes <= 64 since it stores the bitmap in a u64 variable. However, new HE or EHT devices can support BlockAck number up to 256 or 1024, and then using a higher subframe index leads UBSAN warning: UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39 shift exponent 215 is too large for 64-bit type 'long long unsigned int' Call Trace: <IRQ> dump_stack_lvl+0x48/0x70 dump_stack+0x10/0x20 __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211] ieee80211_sta_reorder_release+0x9c/0x400 [mac80211] ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211] ieee80211_rx_list+0xaef/0xf60 [mac80211] ieee80211_rx_napi+0x53/0xd0 [mac80211] Since only old hardware that supports <=64 BlockAck uses ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a WARN_ONCE() and comment to note to avoid using this function if hardware capability is not suitable. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30bonding: fix macvlan over alb bond supportHangbin Liu
[ Upstream commit e74216b8def3803e98ae536de78733e9d7f3b109 ] The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") aims to enable the use of macvlans on top of rlb bond mode. However, the current rlb bond mode only handles ARP packets to update remote neighbor entries. This causes an issue when a macvlan is on top of the bond, and remote devices send packets to the macvlan using the bond's MAC address as the destination. After delivering the packets to the macvlan, the macvlan will rejects them as the MAC address is incorrect. Consequently, this commit makes macvlan over bond non-functional. To address this problem, one potential solution is to check for the presence of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev) and return NULL in the rlb_arp_xmit() function. However, this approach doesn't fully resolve the situation when a VLAN exists between the bond and macvlan. So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit(). As the comment said, Don't modify or load balance ARPs that do not originate locally. Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30ipv4: fix data-races around inet->inet_idEric Dumazet
[ Upstream commit f866fbc842de5976e41ba874b76ce31710b634b5 ] UDP sendmsg() is lockless, so ip_select_ident_segs() can very well be run from multiple cpus [1] Convert inet->inet_id to an atomic_t, but implement a dedicated path for TCP, avoiding cost of a locked instruction (atomic_add_return()) Note that this patch will cause a trivial merge conflict because we added inet->flags in net-next tree. v2: added missing change in drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c (David Ahern) [1] BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1: ip_select_ident_segs include/net/ip.h:542 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0: ip_select_ident_segs include/net/ip.h:541 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x184d -> 0x184e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 ================================================================== Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30net: validate veth and vxcan peer ifindexesJakub Kicinski
[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ] veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30sock: annotate data-races around prot->memory_pressureEric Dumazet
[ Upstream commit 76f33296d2e09f63118db78125c95ef56df438e9 ] *prot->memory_pressure is read/writen locklessly, we need to add proper annotations. A recent commit added a new race, it is time to audit all accesses. Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()") Fixes: 4d93df0abd50 ("[SCTP]: Rewrite of sctp buffer management code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Abel Wu <wuyun.abel@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30jbd2: fix a race when checking checkpoint buffer busyZhang Yi
[ Upstream commit 46f881b5b1758dc4a35fba4a643c10717d0cf427 ] Before removing checkpoint buffer from the t_checkpoint_list, we have to check both BH_Dirty and BH_Lock bits together to distinguish buffers have not been or were being written back. But __cp_buffer_busy() checks them separately, it first check lock state and then check dirty, the window between these two checks could be raced by writing back procedure, which locks buffer and clears buffer dirty before I/O completes. So it cannot guarantee checkpointing buffers been written back to disk if some error happens later. Finally, it may clean checkpoint transactions and lead to inconsistent filesystem. jbd2_journal_forget() and __journal_try_to_free_buffer() also have the same problem (journal_unmap_buffer() escape from this issue since it's running under the buffer lock), so fix them through introducing a new helper to try holding the buffer lock and remove really clean buffer. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490 Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-6-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30jbd2: remove journal_clean_one_cp_list()Zhang Yi
[ Upstream commit b98dba273a0e47dbfade89c9af73c5b012a4eabb ] journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost the same, so merge them into journal_shrink_one_cp_list(), remove the nr_to_scan parameter, always scan and try to free the whole checkpoint list. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Stable-dep-of: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30jbd2: remove t_checkpoint_io_listZhang Yi
[ Upstream commit be22255360f80d3af789daad00025171a65424a5 ] Since t_checkpoint_io_list was stop using in jbd2_log_do_checkpoint() now, it's time to remove the whole t_checkpoint_io_list logic. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-3-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Stable-dep-of: 46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30drm/aperture: Remove primary argumentDaniel Vetter
[ Upstream commit 62aeaeaa1b267c5149abee6b45967a5df3feed58 ] Only really pci devices have a business setting this - it's for figuring out whether the legacy vga stuff should be nuked too. And with the preceding two patches those are all using the pci version of this. Which means for all other callers primary == false and we can remove it now. v2: - Reorder to avoid compile fail (Thomas) - Include gma500, which retained it's called to the non-pci version. v4: - fix Daniel's S-o-b address v5: - add back an S-o-b tag with Daniel's Intel address Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Deepak Rawat <drawat.floss@gmail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Emma Anholt <emma@anholt.net> Cc: Helge Deller <deller@gmx.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-hyperv@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de Stable-dep-of: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-27Revert "f2fs: fix to do sanity check on direct node in truncate_dnode()"Greg Kroah-Hartman
This reverts commit a78a8bcdc26de5ef3a0ee27c9c6c512e54a6051c which is commit a6ec83786ab9f13f25fb18166dee908845713a95 upstream. Something is currently broken in the f2fs code, Guenter has reported boot problems with it for a few releases now, so revert the most recent f2fs changes in the hope to get this back to a working filesystem. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/b392e1a8-b987-4993-bd45-035db9415a6e@roeck-us.net Cc: Chao Yu <chao@kernel.org> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23net: do not allow gso_size to be set to GSO_BY_FRAGSEric Dumazet
[ Upstream commit b616be6b97688f2f2bd7c4a47ab32f27f94fb2a9 ] One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23sock: Fix misuse of sk_under_memory_pressure()Abel Wu
[ Upstream commit 2d0c88e84e483982067a82073f6125490ddf3614 ] The status of global socket memory pressure is updated when: a) __sk_mem_raise_allocated(): enter: sk_memory_allocated(sk) > sysctl_mem[1] leave: sk_memory_allocated(sk) <= sysctl_mem[0] b) __sk_mem_reduce_allocated(): leave: sk_under_memory_pressure(sk) && sk_memory_allocated(sk) < sysctl_mem[0] So the conditions of leaving global pressure are inconstant, which may lead to the situation that one pressured net-memcg prevents the global pressure from being cleared when there is indeed no global pressure, thus the global constrains are still in effect unexpectedly on the other sockets. This patch fixes this by ignoring the net-memcg's pressure when deciding whether should leave global memory pressure. Fixes: e1aab161e013 ("socket: initial cgroup code.") Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Acked-by: Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemptionMarc Zyngier
[ Upstream commit b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 ] Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when running a preemptible kernel, as it is possible that a vCPU is blocked without requesting a doorbell interrupt. The issue is that any preemption that occurs between vgic_v4_put() and schedule() on the block path will mark the vPE as nonresident and *not* request a doorbell irq. This occurs because when the vcpu thread is resumed on its way to block, vcpu_load() will make the vPE resident again. Once the vcpu actually blocks, we don't request a doorbell anymore, and the vcpu won't be woken up on interrupt delivery. Fix it by tracking that we're entering WFI, and key the doorbell request on that flag. This allows us not to make the vPE resident when going through a preempt/schedule cycle, meaning we don't lose any state. Cc: stable@vger.kernel.org Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Suggested-by: Zenghui Yu <yuzenghui@huawei.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Co-developed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23media: v4l2-mem2mem: add lock to protect parameter num_rdyYunfei Dong
[ Upstream commit 56b5c3e67b0f9af3f45cf393be048ee8d8a92694 ] Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3:  v4l2_m2m_buf_queue+0xd8/0x10c Signed-off-by: Pina Chen <pina.chen@mediatek.com> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23iopoll: Call cpu_relax() in busy loopsGeert Uytterhoeven
[ Upstream commit b407460ee99033503993ac7437d593451fcdfe44 ] It is considered good practice to call cpu_relax() in busy loops, see Documentation/process/volatile-considered-harmful.rst. This can not only lower CPU power consumption or yield to a hyperthreaded twin processor, but also allows an architecture to mitigate hardware issues (e.g. ARM Erratum 754327 for Cortex-A9 prior to r2p0) in the architecture-specific cpu_relax() implementation. In addition, cpu_relax() is also a compiler barrier. It is not immediately obvious that the @op argument "function" will result in an actual function call (e.g. in case of inlining). Where a function call is a C sequence point, this is lost on inlining. Therefore, with agressive enough optimization it might be possible for the compiler to hoist the: (val) = op(args); "load" out of the loop because it doesn't see the value changing. The addition of cpu_relax() would inhibit this. As the iopoll helpers lack calls to cpu_relax(), people are sometimes reluctant to use them, and may fall back to open-coded polling loops (including cpu_relax() calls) instead. Fix this by adding calls to cpu_relax() to the iopoll helpers: - For the non-atomic case, it is sufficient to call cpu_relax() in case of a zero sleep-between-reads value, as a call to usleep_range() is a safe barrier otherwise. However, it doesn't hurt to add the call regardless, for simplicity, and for similarity with the atomic case below. - For the atomic case, cpu_relax() must be called regardless of the sleep-between-reads value, as there is no guarantee all architecture-specific implementations of udelay() handle this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/45c87bec3397fdd704376807f0eec5cc71be440f.1685692810.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16netfilter: nf_tables: report use refcount overflowPablo Neira Ayuso
commit 1689f25924ada8fe14a4a82c38925d04994c7142 upstream. Overflow use refcount checks are not complete. Add helper function to deal with object reference counter tracking. Report -EMFILE in case UINT_MAX is reached. nft_use_dec() splats in case that reference counter underflows, which should not ever happen. Add nft_use_inc_restore() and nft_use_dec_restore() which are used to restore reference counter from error and abort paths. Use u32 in nft_flowtable and nft_object since helper functions cannot work on bitfields. Remove the few early incomplete checks now that the helper functions are in place and used to check for refcount overflow. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16wifi: cfg80211: fix sband iftype data lookup for AP_VLANFelix Fietkau
commit 5fb9a9fb71a33be61d7d8e8ba4597bfb18d604d0 upstream. AP_VLAN interfaces are virtual, so doesn't really exist as a type for capabilities. When passed in as a type, AP is the one that's really intended. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16tcp: add missing family to tcp_set_ca_state() tracepointEric Dumazet
commit 8a70ed9520c5fafaac91053cacdd44625c39e188 upstream. Before this code is copied, add the missing family, as we did in commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints") Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ping Gan <jacky_gam_2001@163.com> Cc: Manjusaka <me@manjusaka.me> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-16bpf, sockmap: Fix bug that strp_done cannot be calledXu Kuohai
commit 809e4dc71a0f2b8d2836035d98603694fff11d5d upstream. strp_done is only called when psock->progs.stream_parser is not NULL, but stream_parser was set to NULL by sk_psock_stop_strp(), called by sk_psock_drop() earlier. So, strp_done can never be called. Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock. Change the condition for calling strp_done from judging whether stream_parser is set to judging whether this flag is set. This flag is only set once when strp_init() succeeds, and will never be cleared later. Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-21 09:54:39 +0000