| Age | Commit message (Collapse) | Author |
|---|
|
Call qxl_bo_unpin (which does a reservation) without holding the
release_mutex lock. Fixes lockdep (correctly) warning on a possible
deadlock.
Fixes: 65ffea3c6e73 ("drm/qxl: unpin release objects")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
|
|
Allow to set priorities for buffer objects. Use priority 1 for surface
and cursor command releases. Use priority 0 for drawing command
releases. That way the short-living drawing commands are first in line
when it comes to eviction, making it *much* less likely that
ttm_bo_mem_force_space() picks something which can't be evicted and
throws an error after waiting a while without success.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
|
|
Move qxl_io_notify_oom() call into wait condition.
That way the driver will call it again if one call
wasn't enough.
Also allows to remove the extra dma_fence_is_signaled()
check and the goto.
Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com
|
|
Specifically do not try release resources which where
not allocated in the first place.
Cc: Tong Zhang <ztong0001@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com
|
|
The fdd property of the tilcdc_panel_info structure must set the reqdly
bit field (bit 12 to 19) of the raster control register. The previous
statement set the least significant bit instead.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it
|
|
The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com
|
|
It's possible to modeset a connector/mst port that has a 0 full_pbn
value: if the sink on the port deasserts its HPD and a branch device
reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver
clears full_pbn, but the corresponding connector can be still
modesetted.
This happened on a DELL U2719D monitor as the branch device and an LG
27UL650-W daisy-chained to it, the LG monitor generating a long HPD
pulse (doing this for some reason always when waking up from some power
saving state).
Tune down the WARN about this scenario to a debug message.
v2: Use the correct atomic debug message level. (Lyude)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
|
|
The driver uses in_atomic() to distinguish between mdelay() and msleep().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
I traced the usage of in_interrupt() back to its initial merge:
bfe694f833643 ("[ARM] Add ARM AMBA CLCD framebuffer driver.")
https://git.kernel.org/history/history/c/bfe694f833643
The driver has been removed and added back in the meantime.
I've been looking for the IRQ context as described in the comment and
couldn't find it. The functions calling clcdfb_sleep() also call
conditionally backlight_update_status() which acquires a mutex. If it is
okay to acquire a mutex then it is okay to use msleep() since both
functions must be used in preemptible context.
Replace clcdfb_sleep() with msleep().
Cc: Peter Collingbourne <pcc@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-4-bigeasy@linutronix.de
|
|
dsi_sync_vc() uses in_interrupt() to create a warning if the function is
used in non-preemptible context.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The wait_for_completion() function (used in dsi_sync_vc_vp() and
dsi_sync_vc_l4() has already a check if it is invoked from proper
context.
Remove WARN_ON(in_interrupt()) from the driver.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-3-bigeasy@linutronix.de
|
|
alloc_req() uses in_interrupt() to detect if it is safe to use down().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The semaphore is used as a counting semaphore, initialized with the
number of slots in the request pool minus IRQ_REQ_POOL_SIZE - which are
reserved for the in_interrupt() user to ensure that a request is always
available. The preemptible user will block on the semphore waiting for a
request to become available in case there are no requests available.
Replace in_interrupt() with a `can_sleep' argument to indicate if it is
safe to block on the sempahore.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-2-bigeasy@linutronix.de
|
|
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
|
|
Now that we can print FourCC codes directly using printk, make use of the
feature in V4L2 core.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-3-sakari.ailus@linux.intel.com
|
|
We used to update the cursor image in prepare_fb. Move all this code to
atomic_update (where it belongs). The generic helper for shadow-buffered
planes now implement the cursor plane's prepare_fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
|
|
As HW cursor BOs never move, we can store the offset in VRAM in the
cursor-plane's HWC state. This removes the last possible source of
runtime errors from atomic_update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
|
|
The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.
The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
|
|
The cursor uses two BOs in video RAM to implement double buffering. Store
both in struct ast_cursor_plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
|
|
Cursor state is currently located throughout struct ast_private. Having
struct ast_cursor_plane as dedicated data structure for cursors helps to
organize the modesetting code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
|
|
The logic for cursor updates is now located in the cursor plane's
modesetting code. A number of helper functions remain to modify the
rsp registers and image.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
|
|
The BOs are eventually released by the cursor plane's destroy callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
|
|
This change will help with inlining cursor functions into modesetting
code. The primary plane's field used to be cleared with memset(). This
has been dropped as the memory is always allocated with kzalloc().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de
|
|
Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's
atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked
because both constants has the same value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de
|
|
Set the bits in VGACRCB with constants. Alo move the rsp code into a
helper function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de
|
|
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW
or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no
matter what polarity the next bridge or display might require, these flags
are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set
and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and
DISPLAY_FLAGS_DE_HIGH were always set.
The fix for this problem is taken almost verbatim from MXSFB driver. In
case there is a bridge attached to the LTDC, the bridge might have extra
polarity requirements, so extract bus_flags from the bridge and use them
for LTDC configuration. Otherwise, extract bus_flags from the connector,
which is the display.
Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
|
|
Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay
in the threaded irq handler as long as we can.
v2:
* Rework the loop to avoid a goto
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-4-boris.brezillon@collabora.com
|
|
We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com
|
|
When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com
|
|
Swapping bo->mem was completely unecessary. Cleanup the function which
is just a leftover from a TTM cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211131659.276275-1-christian.koenig@amd.com
|
|
There's no need to check for the presence of the hotplug
property just to return because this is the end of the function
so we're returning either way.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com
|
|
Our sysfs "modes" entries were broken because our preffered mode
never had its name set correctly. This resulted in the first
entry simply being called "preferred" followed by a list of
other resolutions. Lets fix it by actually setting the name of
mode (which is its resolution). This allows one to quickly
validate the modes set by the open-vm-tools.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com
|
|
The default list was old and in particular lacking all common 16:9
resolutions, as well as some newer 16:10 ones.
This makes them selectable in resolution change lists, which can be
quite useful (for instance in case auto-fit isn't enabled).
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com
|
|
Use getter and setter functions, for platform_device structures and a
mipi_dsi_device structure.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr
|
|
I got real badly confused when trying to review a fix from Ville for
this. Let's try to document better what's required for this, and check
the minimal settings at runtime - we can't check ofc that there's
indeed no races in the driver callback.
Also noticed that the drm_vblank_restore version is unused, so lets
unexport that while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209101523.2954281-1-daniel.vetter@ffwll.ch
|
|
DE3.0 VI layers supports plane-global alpha channel.
DE2.0 FCC block have GLOBAL_ALPHA register that can be used as alpha source
for blender.
Add alpha property to the DRM plane and connect it to the
corresponding registers in the mixer.
Do not add alpha property for V3s SOC that have DE2.0 and 2 VI planes.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-3-r.stratiienko@gmail.com
|
|
DE2.0 and DE3.0 UI layers supports plane-global alpha channel.
Add alpha property to the DRM plane and connect it to the
corresponding registers in mixer.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-2-r.stratiienko@gmail.com
|
|
There are minor differences in the values for the threshold value and
the scan line size between families of ASPEED SoC. Additionally the SCU
registers for the output control and scratch registers differ between
families.
This adds device tree matching to parameterise these values, allowing us
to add support for the AST2400 now, and in the future the AST2600.
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-3-joel@jms.id.au
|
|
This scales better to multiple families of SoC. The lookup by compatible
can be removed in a future change.
The fallback path is for the ast2500 platform only. Other platforms will
be added with the new style, so they won't need fallback paths.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-2-joel@jms.id.au
|
|
When run xrandr to change resolution on Beaglebone Black board, it will
print the error information:
root@beaglebone:~# xrandr -display :0 --output HDMI-1 --mode 720x400
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] commit wait timed out
tilcdc 4830e000.lcdc: already pending page flip!
This is because there is operation sequence as below:
drm_atomic_connector_commit_dpms(mode is DRM_MODE_DPMS_OFF):
...
drm_atomic_helper_setup_commit <- init_completion(commit_A->flip_done)
drm_atomic_helper_commit_tail
tilcdc_crtc_atomic_disable
tilcdc_plane_atomic_update <- drm_crtc_send_vblank_event in tilcdc_crtc_irq
is skipped since tilcdc_crtc->enabled is 0
tilcdc_crtc_atomic_flush <- drm_crtc_send_vblank_event is skipped since
crtc->state->event is set to be NULL in
tilcdc_plane_atomic_update
drm_mode_setcrtc:
...
drm_atomic_helper_setup_commit <- init_completion(commit_B->flip_done)
drm_atomic_helper_wait_for_dependencies
drm_crtc_commit_wait <- wait for commit_A->flip_done completing
Just as shown above, the steps which could complete commit_A->flip_done
are all skipped and commit_A->flip_done will never be completed. This will
result a time-out ERROR when drm_crtc_commit_wait check the commit_A->flip_done.
So add drm_crtc_send_vblank_event in tilcdc_crtc_atomic_disable to
complete commit_A->flip_done.
Fixes: cb345decb4d2 ("drm/tilcdc: Use standard drm_atomic_helper_commit")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209082415.382602-1-quanyang.wang@windriver.com
|
|
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-3-christian.koenig@amd.com
|
|
This is just another feature which is only used by VMWGFX, so move
it into the driver instead.
I've tried to add the accounting sysfs file to the kobject of the drm
minor, but I'm not 100% sure if this works as expected.
v2: fix typo in KFD and avoid 64bit divide
v3: fix init order in VMWGFX
v4: use pdev sysfs reference instead of drm
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com> (v3)
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-2-christian.koenig@amd.com
|
|
TTM implements a rather extensive accounting of allocated memory.
There are two reasons for this:
1. It tries to block userspace allocating a huge number of very small
BOs without accounting for the kmalloced memory.
2. Make sure we don't over allocate and run into an OOM situation
during swapout while trying to handle the memory shortage.
This is only partially a good idea. First of all it is perfectly
valid for an application to use all of system memory, limiting it to
50% is not really acceptable.
What we need to take care of is that the application is held
accountable for the memory it allocated. This is what control
mechanisms like memcg and the normal Linux page accounting already do.
Making sure that we don't run into an OOM situation while trying to
cope with a memory shortage is still a good idea, but this is also
not very well implemented since it means another opportunity of
recursion from the driver back into TTM.
So start to rework all of this by implementing a shrinker callback which
allows for TT object to be swapped out if necessary.
v2: Switch from limit to shrinker callback.
v3: fix gfp mask handling, use atomic for swapable_pages, add debugfs
v4: drop the extra gfp_mask checks
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-1-christian.koenig@amd.com
|
|
Only a zombie leftover from rebasing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 3763d635deaa ("drm/ttm: add debugfs directory v2")
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209131756.24650-1-christian.koenig@amd.com
|
|
Functions in the atomic commit tail are not allowed to acquire the
dmabuf's reservation lock. So we cannot legally call the GEM object's
vmap functionality in atomic_update.
Instead use struct drm_shadow_plane_state and friends. It vmaps the
framebuffer BOs in prepare_fb and vunmaps them in cleanup_fb. The
cursor plane state stores the mapping's address. The pinning of the
BO is implicitly done by vmap.
As an extra benefit, there's no source of runtime errors left in
atomic_update.
v2:
* rebase patch onto struct drm_shadow_plane_state
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-3-tzimmermann@suse.de
|
|
Export the helpers for shadow-buffered planes. These will be used by
several drivers.
v3:
* fix documentation typos and formatting (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-2-tzimmermann@suse.de
|
|
Blits cannot happen anymore since we removed the 2d accel code. Stop
checking for a busy blitter and remove the remaining blitter code.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-6-patrik.r.jakobsson@gmail.com
|
|
Since everything else in accel_2d.c got removed we can move psb_spank()
into psb_drv.c where it is used.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-5-patrik.r.jakobsson@gmail.com
|
|
CDV crtc helpers are identical to other chips so use gma_ prefix for the
crtc helper struct and remove the CDV copy.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-4-patrik.r.jakobsson@gmail.com
|
|
Afaik tv out is not available on Cedarview and the code isn't doing
anything so remove it.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-3-patrik.r.jakobsson@gmail.com
|
|
DPST never got enabled so remove it. We keep the reg save/restore code
just for safety.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-2-patrik.r.jakobsson@gmail.com
|
|
Clearly never been used so just remove it.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-1-patrik.r.jakobsson@gmail.com
|
|
With support for the MID-only Medfield chips removed, simply build
the complete driver if DRM_GMA500 has been selected. Anyone who wants
to enable one of the chips would probably also want the rest.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 837f23bb4b60 ("drm/gma500: Drop DRM_GMA3600 config option")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209112721.3421-1-tzimmermann@suse.de
|