summary refs log tree commit diff
path: root/drivers
AgeCommit message (Collapse)Author
2020-04-19iio: xilinx-xadc: Fix sequencer configuration for aux channels in ↵Lars-Peter Clausen
simultaneous mode The XADC has two internal ADCs. Depending on the mode it is operating in either one or both of them are used. The device manual calls this continuous (one ADC) and simultaneous (both ADCs) mode. The meaning of the sequencing register for the aux channels changes depending on the mode. In continuous mode each bit corresponds to one of the 16 aux channels. And the single ADC will convert them one by one in order. In simultaneous mode the aux channels are split into two groups the first 8 channels are assigned to the first ADC and the other 8 channels to the second ADC. The upper 8 bits of the sequencing register are unused and the lower 8 bits control both ADCs. This means a bit needs to be set if either the corresponding channel from the first group or the second group (or both) are set. Currently the driver does not have the special handling required for simultaneous mode. Add it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: xilinx-xadc: Fix clearing interrupt when enabling triggerLars-Peter Clausen
When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt the EOS interrupt should be cleared from the status register. Otherwise it is possible that it was still set from a previous capture. If that is the case the interrupt would fire immediately even though no conversion has been done yet and stale data is being read from the device. The old code only clears the interrupt if the interrupt was previously unmasked. Which does not make much sense since the interrupt is always masked at this point and in addition masking the interrupt does not clear the interrupt from the status register. So the clearing needs to be done unconditionally. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: xilinx-xadc: Fix ADC-B powerdownLars-Peter Clausen
The check for shutting down the second ADC is inverted. This causes it to be powered down when it should be enabled. As a result channels that are supposed to be handled by the second ADC return invalid conversion results. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: dac: ad5770r: fix off-by-one check on maximum number of channelsColin Ian King
Currently there is an off-by-one check on the number of channels that will cause an arry overrun in array st->output_mode when calling the function d5770r_store_output_range. Fix this by using >= rather than > to check for maximum number of channels. Addresses-Coverity: ("Out-of-bounds access") Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: imu: st_lsm6dsx: flush hw FIFO before resetting the deviceLorenzo Bianconi
flush hw FIFO before device reset in order to avoid possible races on interrupt line 1. If the first interrupt line is asserted during hw reset the device will work in I3C-only mode (if it is supported) Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Fixes: 43901008fde0 ("iio: imu: st_lsm6dsx: add support to LSM6DSR") Reported-by: Mario Tesi <mario.tesi@st.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Vitor Soares <vitor.soares@synopsys.com> Tested-by: Vitor Soares <vitor.soares@synopsys.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: core: Fix handling of 'dB'Mircea Caprioru
This patch fixes the call to iio_str_to_fixpoint when using 'dB' sufix. Before this the scale_db was not used when parsing the string written to the attribute and it failed with invalid value. Fixes: b8528224741b ("iio: core: Handle 'dB' suffix in core") Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19counter: 104-quad-8: Add lock guards - generic interfaceSyed Nayyar Waris
Add lock protection from race conditions to 104-quad-8 counter driver generic interface code changes. Mutex calls used for protection. Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support") Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-28iio: imu: st_lsm6dsx: specify slave odr in slv_odrLorenzo Bianconi
Introduce slv_odr in ext_info data structure in order to distinguish between sensor hub trigger (accel sensor) odr and i2c slave odr and properly compute samples in FIFO pattern Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-28iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFOLorenzo Bianconi
st_lsm6dsx suffers of a read misalignment on untagged FIFO when all 3 supported sensors (accel, gyro and ext device) are running at different ODRs (the use-case is reported in the LSM6DSM Application Note at pag 100). Fix the issue taking into account decimation factor reading the FIFO pattern. Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-28iio: adc: stm32-adc: fix sleep in atomic contextOlivier Moysan
This commit fixes the following error: "BUG: sleeping function called from invalid context at kernel/irq/chip.c" In DMA mode suppress the trigger irq handler, and make the buffer transfers directly in DMA callback, instead. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-28iio:ad7797: Use correct attribute_groupYueHaibing
It should use ad7797_attribute_group in ad7797_info, according to commit ("iio:ad7793: Add support for the ad7796 and ad7797"). Scale is fixed for the ad7796 and not programmable, hence should not have the scale_available attribute. Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-27staging: vt6656: Use DIV_ROUND_UP macro instead of specific codeOscar Carter
Use DIV_ROUND_UP macro instead of specific code with the same purpose. Also, remove the unused variables. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Reviewed-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk> Link: https://lore.kernel.org/r/20200326175902.14467-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27staging: remove hp100 driverGreg Kroah-Hartman
It's old, obsolete, and no one wants to take care of it anymore. It's been in staging for 5 months with no one paying attention to it, so let's just delete it for now. If someone has this hardware, and wants the driver back, the deletion can be easily reverted. Cc: Joe Perches <joe@perches.com> Cc: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200326080233.978323-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wilc1000: Use crc7 in lib/ rather than a private copyGeorge Spelvin
The code in lib/ is the desired polynomial, and even includes the 1-bit left shift in the table rather than needing to code it explicitly. While I'm in Kconfig, add a description of what a WILC1000 is. Kconfig questions that require me to look up a data sheet to find out that I probably don't have one are a pet peeve. Cc: Adham Abozaeid <adham.abozaeid@microchip.com> Cc: linux-wireless@vger.kernel.org Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200326152251.19094-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_alert().Sam Muhammed
Replace printk(KERN_ALERT ...) with netdev_alert() when a network device is available. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/70e8781cd2a9512cb6b3c42400a10323f3024f3c.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.Sam Muhammed
netdev_info() should be used instead of printk(KERN_INFO ...) since it's specific to and preferable for printing messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/ce20980cc1947255b8a2de3c1f1364c11c163b9e.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.Sam Muhammed
Use netdev_warn() over printk(). netdev_warn() is specific for printing warning messages for network devices, and preferable over printk(KERN_WARNING ...). Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/02fe0666cb737a3b0581081c9e7c179bfb820cac.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.Sam Muhammed
Replace printk(KERN_DEBUG ...) with netdev_dbg() across the driver. since netdev_dbg() is preferable and specific for printing debug messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/84dc7e33954509457efce2a35fb293e631845a96.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callbackQiujun Huang
We can't handle the case length > WLAN_DATA_MAXLEN. Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove NULL check before kfreeSimran Singhal
NULL check before kfree is unnecessary so remove it. The following Coccinelle script was used to detect this: @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326132823.GA18625@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326143023.13681-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: os_dep: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326125500.12861-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: core: Correct typos in commentsR Veera Kumar
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326123540.12401-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove unnecessary cast on void pointerSimran Singhal
Assignment to a typed pointer is sufficient in C. No cast is needed. The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326113210.GA29951@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8188eu: cleanup long line in odm.cMichael Straube
Cleanup line over 80 characters by removing unnecessary test 'pDM_Odm->RSSI_Min <= 25'. The above test 'pDM_Odm->RSSI_Min > 25' already guarantees that it is <= 25. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200326084348.15072-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Compress return logicSimran Singhal
Simplify function returns by merging assignment and return into one command line. Found with Coccinelle @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325214312.GA1936@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_cmd: Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It also removes variable cmd_obj as it is no longer needed. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325212253.GA8175@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_efuse: Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325205418.GA29149@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wilc1000: remove label from examples in DT binding documentationAjay Singh
Remove labels and not relevant property from DT binding documentation examples as suggested in [1]. 1. https://patchwork.ozlabs.org/patch/1252837 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20200325164234.14146-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Remove blank line before '}' braceSimran Singhal
Remove unneeded blank line before a close brace '}'. Issue found by checkpatch.pl: CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325182617.GA9411@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: rtl8188eu: hal: Add space around operatorsShreeya Patel
Add space around operators for improving the code readability. Reported by checkpatch.pl git diff -w shows no difference. diff of the .o files before and after the changes shows no difference. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Link: https://lore.kernel.org/r/20200325160142.3698-1-shreeya.patel23498@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use spaces around operators.Sam Muhammed
Cleanup Checkpatch.pl CHECKs about missing spaces around multiple operators. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/22025abc8f8f3452c2d886e8faf1fe0532e8bb1d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use kcalloc over kzalloc.Sam Muhammed
Replace kzalloc(sizeof(...) * n, ...) with kcalloc(n, sizeof(...), ...) since kcalloc is the preferred API in case of allocating with multiply. Checkpatch.pl: WARNING: Prefer kcalloc over kzalloc with multiply. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/4b8339d1e81e497c3c2f0dad57a9587338ec82b1.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use the SPDK comment style.Sam Muhammed
SPDK-License-Identifier comment should have this form // SPDX-License-Identifier: <GPL-...> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/7531e3e3fa7c046e93d2caaa6fa2e76c5c53f04d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Include the preferred header.Sam Muhammed
<linux/io.h> is the preferred header to include instead of <asm/io.h>. Checkpatch.pl WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/c7a824c3a2ddc5f44bd89504b8c03a328d69f81d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Remove unnecessary braces.Sam Muhammed
Remove braces of single statement blocks, they are not really needed. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/0a3ec63321dce008fc8dd790f42ef8490135b307.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use sizeof(*var) in kzalloc().Sam Muhammed
kzalloc(sizeof(*var), ...) was the format been used across the driver, which is the preferred format, but missed two instances, correct them to match the coding standards. Checkpatch.pl CHECK: Prefer kzalloc(sizeof(*var)...) over kzalloc(sizeof(struct var)...) Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/bbb3adbd20ae89db6a0d3360bc09d22eed778e86.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Remove comparison to NULL.Sam Muhammed
Comparison to NULL been used across the driver, remove them and use (!var) instead. Checkpatch.pl: CHECK: Comparison to NULL could be written "!desc"... etc Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/f344afba0a8bb0413941a63678688435f04a96b4.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Properly indent the multiline comments.Soumyajit Deb
Shift the end of multiline comments "*/" to the next line and align the lines of the comments properly to improve code readability and to adhere to the Linux Kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325180003.46749-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Add line after variable declarationsSimran Singhal
Add whiteline after variable declarations to remove the checkpatch.pl warning: WARNING: Missing a blank line after declarations Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325164451.GA17569@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Add space around operatorSoumyajit Deb
Add space around "-" operator to improve code readability and adhere to the Linux kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325144353.42655-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Remove multiple assignmentsSimran Singhal
Remove multiple assignments by factorizing them. Problem found using checkpatch.pl:- CHECK: multiple assignments should be avoided Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325142226.GA14711@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Remove unnecessary braces for single statementsSimran Singhal
Clean up unnecessary braces around single statement blocks. Issues reported by checkpatch.pl as: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325140245.GA11949@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Add spaces in if statement.Soumyajit Deb
Add space between if and open parenthesis to improve code readability and to adhere to the standard linux kernel coding style. Also, shift the next line to the right by a single space as it is the continuation of the above if statement. Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325122752.38600-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Add space between while keyword and open parenthesisSoumyajit Deb
Add space between while keyword and open parenthesis "(" in the do while statement to improve code readability and to adhere to the Linux Kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325115956.37126-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Remove space after opening parenthesis "("Soumyajit Deb
Remove space after opening parenthesis in if statement to improve code readability and to adhere to the standard coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-7-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: hp100: Add space after "," in function arguments.Soumyajit Deb
Add space after "," in function arguments to improve code readability. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-6-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Correct typo in the commentSoumyajit Deb
Correct typo in the comment by changing "overriden" to "overridden". Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-4-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Remove extra blank linesSoumyajit Deb
Remove extra blank lines from the code blocks. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325035410.23802-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usbQiujun Huang
We should cancel hw->usb_work before kfree(hw). Reported-by: syzbot+6d2e7f6fa90e27be9d62@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1585120006-30042-1-git-send-email-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-16 20:55:41 +0000