summary refs log tree commit diff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2023-04-13tty: serial: sh-sci: Fix transmit end interrupt handlerBiju Das
commit b43a18647f03c87e77d50d6fe74904b61b96323e upstream. The fourth interrupt on SCI port is transmit end interrupt compared to the break interrupt on other port types. So, shuffle the interrupts to fix the transmit end interrupt handler. Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI") Cc: stable <stable@kernel.org> Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin
[ Upstream commit 1be6f2b15f902c02e055ae0b419ca789200473c9 ] From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* APISherry Sun
[ Upstream commit 8682ab0eea89c300ebb120c02ead3999ca5560a8 ] Convert dmaengine_terminate_all() calls to synchronous and asynchronous versions where appropriate. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221123023619.30173-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1be6f2b15f90 ("tty: serial: fsl_lpuart: fix race on RX DMA shutdown") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30hvc/xen: prevent concurrent accesses to the shared ringRoger Pau Monne
[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ] The hvc machinery registers both a console and a tty device based on the hv ops provided by the specific implementation. Those two interfaces however have different locks, and there's no single locks that's shared between the tty and the console implementations, hence the driver needs to protect itself against concurrent accesses. Otherwise concurrent calls using the split interfaces are likely to corrupt the ring indexes, leaving the console unusable. Introduce a lock to xencons_info to serialize accesses to the shared ring. This is only required when using the shared memory console, concurrent accesses to the hypercall based console implementation are not an issue. Note the conditional logic in domU_read_console() is slightly modified so the notify_daemon() call can be done outside of the locked region: it's an hypercall and there's no need for it to be done with the lock held. Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap
commit f8086d1a65ac693e3fd863128352b4b11ee7324d upstream. REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22serial: 8250_fsl: fix handle_irq lockingJohan Hovold
commit 6e01f9a594ee0f69fb52cc8d11971612b4817f0b upstream. The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22serial: 8250_em: Fix UART port typeBiju Das
commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream. As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22tty: serial: fsl_lpuart: skip waiting for transmission complete when ↵Sherry Sun
UARTCTRL_SBK is asserted commit 2411fd94ceaa6e11326e95d6ebf876cbfed28d23 upstream. According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config ↵Tom Rix
dependency" commit 2d638be71155b2e036aca1966b6129e2d661e91f upstream. This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30. This results in a link error of ld: drivers/tty/serial/earlycon.o: in function `parse_options': drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon' When the config is in this state CONFIG_SERIAL_CORE=m CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_FSL_LPUART=m CONFIG_SERIAL_FSL_LPUART_CONSOLE=y Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency") Cc: stable <stable@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11tty: pcn_uart: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
[ Upstream commit 04a189c720aa2b6091442113ce9b9bc93552dff8 ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230202141221.2293012-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11serial: sc16is7xx: setup GPIO controller later in probeIsaac True
[ Upstream commit c8f71b49ee4d28930c4a6798d1969fa91dc4ef3e ] The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. Co-developed-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Isaac True <isaac.true@canonical.com> Link: https://lore.kernel.org/r/20221130105529.698385-1-isaac.true@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11tty: serial: fsl_lpuart: disable the CTS when send break signalSherry Sun
[ Upstream commit c4c81db5cf8bc53d6160c3abf26d382c841aa434 ] LPUART IP has a bug that it treats the CTS as higher priority than the break signal, which cause the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. Add this workaround patch to fix the IP bug, we can disable CTS before asserting SBK to avoid any interference from CTS, and re-enable it when break off. Such as for the bluetooth chip power save feature, host can let the BT chip get into sleep state by sending a UART break signal, and wake it up by turning off the UART break. If the BT chip enters the sleep mode successfully, it will pull up the CTS line, if the BT chip is woken up, it will pull down the CTS line. If without this workaround patch, the UART TX pin cannot send the break signal successfully as it affected by the BT CTS pin. After adding this patch, the BT power save feature can work well. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221214031137.28815-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11tty: fix out-of-bounds access in tty_driver_lookup_tty()Sven Schnelle
[ Upstream commit db4df8e9d79e7d37732c1a1b560958e8dadfefa1 ] When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number. To reproduce: qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270" This crashes with: [ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30 Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221209112737.3222509-2-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11vc_screen: modify vcs_size() handling in vcs_read()George Kennedy
[ Upstream commit 46d733d0efc79bc8430d63b57ab88011806d5180 ] Restore the vcs_size() handling in vcs_read() to what it had been in previous version. Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10tty: serial: imx: disable Ageing Timer interrupt request irqPeng Fan
[ Upstream commit ef25e16ea9674b713a68c3bda821556ce9901254 ] There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. Fixes: 8a61f0c70ae6 ("serial: imx: Disable irqs before requesting them") Suggested-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Link: https://lore.kernel.org/r/20230206013016.29352-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10tty: serial: imx: Handle RS485 DE signal active highMarek Vasut
[ Upstream commit 79d0224f6bf296d04cd843cfc49921b19c97bb09 ] The default polarity of RS485 DE signal is active high. This driver does not handle such case properly. Currently, when a pin is multiplexed as a UART CTS_B on boot, this pin is pulled HIGH by the i.MX UART CTS circuit, which activates DE signal on the RS485 transceiver and thus behave as if the RS485 was transmitting data, so the system blocks the RS485 bus when it starts and until user application takes over. This behavior is not OK. The problem consists of two separate parts. First, the i.MX UART IP requires UCR1 UARTEN and UCR2 RXEN to be set for UCR2 CTSC and CTS bits to have any effect. The UCR2 CTSC bit permits the driver to set CTS (RTS_B or RS485 DE signal) to either level sychronous to the internal UART IP clock. Compared to other options, like GPIO CTS control, this has the benefit of being synchronous to the UART IP clock and thus without glitches or bus delays. The reason for the CTS design is likely because when the Receiver is disabled, the UART IP can never indicate that it is ready to receive data by assering CTS signal, so the CTS is always pulled HIGH by default. When the port is closed by user space, imx_uart_stop_rx() clears UCR2 RXEN bit, and imx_uart_shutdown() clears UCR1 UARTEN bit. This disables UART Receiver and UART itself, and forces CTS signal HIGH, which leads to the RS485 bus being blocked because RS485 DE is incorrectly active. The proposed solution for this problem is to keep the Receiver running even after the port is closed, but in loopback mode. This disconnects the RX FIFO input from the RXD external signal, and since UCR2 TXEN is cleared, the UART Transmitter is disabled, so nothing can feed data in the RX FIFO. Because the Receiver is still enabled, the UCR2 CTSC and CTS bits still have effect and the CTS (RS485 DE) control is retained. Note that in case of RS485 DE signal active low, there is no problem and no special handling is necessary. The CTS signal defaults to HIGH, thus the RS485 is by default set to Receive and the bus is not blocked. Note that while there is the possibility to control CTS using GPIO with either CTS polarity, this has the downside of not being synchronous to the UART IP clock and thus glitchy and susceptible to slow DE switching. Second, on boot, before the UART driver probe callback is called, the driver core triggers pinctrl_init_done() and configures the IOMUXC to default state. At this point, UCR1 UARTEN and UCR2 RXEN are both still cleared, but UART CTS_B (RS485 DE) is configured as CTS function, thus the RTS signal is pulled HIGH by the UART IP CTS circuit. One part of the solution here is to enable UCR1 UARTEN and UCR2 RXEN and UTS loopback in this driver probe callback, thus unblocking the CTSC and CTS control early on. But this is still too late, since the pin control is already configured and CTS has been pulled HIGH for a short period of time. When Linux kernel boots and this driver is bound, the pin control is set to special "init" state if the state is available, and driver can switch the "default" state afterward when ready. This state can be used to set the CTS line as a GPIO in DT temporarily, and a GPIO hog can force such GPIO to LOW, thus keeping the RS485 DE line LOW early on boot. Once the driver takes over and UCR1 UARTEN and UCR2 RXEN and UTS loopback are all enabled, the driver can switch to "default" pin control state and control the CTS line as function instead. DT binding example is below: " &gpio6 { rts-init-hog { gpio-hog; gpios = <5 0>; output-low; line-name = "rs485-de"; }; }; &uart5 { /* DHCOM UART2 */ pinctrl-0 = <&pinctrl_uart5>; pinctrl-1 = <&pinctrl_uart5_init>; pinctrl-names = "default", "init"; ... }; pinctrl_uart5_init: uart5-init-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x30b1 >; }; pinctrl_uart5: uart5-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x30b1 >; }; " Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220929144400.13571-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: ef25e16ea967 ("tty: serial: imx: disable Ageing Timer interrupt request irq") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10serial: fsl_lpuart: fix RS485 RTS polariy inverse issueShenwei Wang
[ Upstream commit 3957b9501a5a8fa709ae4a47483714491471f6db ] The previous 'commit 846651eca073 ("serial: fsl_lpuart: RS485 RTS polariy is inverse")' only fixed the inverse issue on lpuart 8bit platforms. This is a follow-up patch to fix the RS485 polarity inverse issue on lpuart 32bit platforms. Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485") Reported-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20230207162420.3647904-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma caseSherry Sun
[ Upstream commit 9ad9df8447547febe9dd09b040f4528a09e495f0 ] The RXWATER value must be greater than 0 according to the LPUART reference manual. And when the number of datawords in the receive FIFO is greater than RXWATER, an interrupt or a DMA request is generated, so no need to set the different value for lpuart interrupt case and dma case. Here delete the wrong RXWATER setting for dma case directly. Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230130064449.9564-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()Yi Yang
[ Upstream commit 38f28cfe9d08e3a47ef008798b275fef8118fc20 ] Add the missing clk_disable_unprepare() before return from tegra_uart_hw_init() in the error handling path. When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk' has been enabled, fix it by adding clk_disable_unprepare(). Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs") Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Signed-off-by: Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()Sherry Sun
[ Upstream commit 4029dfc034febb54f6dd8ea83568accc943bc088 ] The LPUART Status Register needs to be cleared when closing the uart port to get a clean environment when reopening the uart. Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221125101953.18753-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()Sherry Sun
[ Upstream commit 1d4bd0e4ae4ba95892bef919a8d4d3f08f122d7e ] UARTBAUD_RDMAE and UARTBAUD_TDMAE are enabled in lpuart32_startup(), but lpuart32_shutdown() not disable them, only free the dma ring buffer and release the dma channels, so here disable the Rx/Tx DMA first in lpuart32_shutdown(). Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221125101953.18753-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-03vc_screen: don't clobber return value in vcs_readThomas Weißschuh
commit ae3419fbac845b4d3f3a9fae4cc80c68d82cdf6e upstream. Commit 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop. While doing this it also moved the unconditional assignment of ret = -ENXIO; This unconditional assignment was valid outside the loop but within it it clobbers the actual value of ret. To avoid this only assign "ret = -ENXIO" when actually needed. [ Also, the 'goto unlock_out" needs to be just a "break", so that it does the right thing when it exits on later iterations when partial success has happened - Linus ] Reported-by: Storm Dragon <stormdragon2976@gmail.com> Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/ Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09serial: 8250_dma: Fix DMA Rx rearm raceIlpo Järvinen
commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream. As DMA Rx can be completed from two places, it is possible that DMA Rx completes before DMA completion callback had a chance to complete it. Once the previous DMA Rx has been completed, a new one can be started on the next UART interrupt. The following race is possible (uart_unlock_and_check_sysrq_irqrestore() replaced with spin_unlock_irqrestore() for simplicity/clarity): CPU0 CPU1 dma_rx_complete() serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma_flush() __dma_rx_complete() dma->rx_running = 0 // Complete DMA Rx spin_unlock_irqrestore(&port->lock) serial8250_handle_irq() spin_lock_irqsave(&port->lock) handle_rx_dma() serial8250_rx_dma() dma->rx_running = 1 // Setup a new DMA Rx spin_unlock_irqrestore(&port->lock) spin_lock_irqsave(&port->lock) // sees dma->rx_running = 1 __dma_rx_complete() dma->rx_running = 0 // Incorrectly complete // running DMA Rx This race seems somewhat theoretical to occur for real but handle it correctly regardless. Check what is the DMA status before complething anything in __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09serial: 8250_dma: Fix DMA Rx completion raceIlpo Järvinen
commit 31352811e13dc2313f101b890fd4b1ce760b5fe7 upstream. __dma_rx_complete() is called from two places: - Through the DMA completion callback dma_rx_complete() - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT The former does not hold port's lock during __dma_rx_complete() which allows these two to race and potentially insert the same data twice. Extend port's lock coverage in dma_rx_complete() to prevent the race and check if the DMA Rx is still pending completion before calling into __dma_rx_complete(). Reported-by: Gilles BULOZ <gilles.buloz@kontron.com> Tested-by: Gilles BULOZ <gilles.buloz@kontron.com> Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handlerMarek Vasut
commit 3f6c02fa712bd453871877fe1d1969625617471e upstream. Requesting an interrupt with IRQF_ONESHOT will run the primary handler in the hard-IRQ context even in the force-threaded mode. The force-threaded mode is used by PREEMPT_RT in order to avoid acquiring sleeping locks (spinlock_t) in hard-IRQ context. This combination makes it impossible and leads to "sleeping while atomic" warnings. Use one interrupt handler for both handlers (primary and secondary) and drop the IRQF_ONESHOT flag which is not needed. Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3 Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230120160332.57930-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAFGeorge Kennedy
[ Upstream commit 226fae124b2dac217ea5436060d623ff3385bc34 ] After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Link: https://lore.kernel.org/r/1674577014-12374-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24serial: exar: Add support for Sealevel 7xxxC serial cardsMatthew Howell
commit 14ee78d5932afeb710c8305196a676a715bfdea8 upstream. Add support for Sealevel 7xxxC serial cards. This patch: * Adds IDs to recognize 7xxxC cards from Sealevel Systems. * Updates exar_pci_probe() to set nr_ports to last two bytes of primary dev ID for these cards. Signed-off-by: Matthew Howell <matthew.howell@sealevel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24serial: atmel: fix incorrect baudrate setupTobias Schramm
commit 5bfdd3c654bd879bff50c2e85e42f85ae698b42f upstream. Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") changed uart_set_options to select the correct baudrate configuration based on the absolute error between requested baudrate and available standard baudrate settings. Prior to that commit the baudrate was selected based on which predefined standard baudrate did not exceed the requested baudrate. This change of selection logic was never reflected in the atmel serial driver. Thus the comment left in the atmel serial driver is no longer accurate. Additionally the manual rounding up described in that comment and applied via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses tty_termios_encode_baud_rate to determine the appropriate baudrate flags this can cause baudrate selection to fail entirely because tty_termios_encode_baud_rate will only select a baudrate if relative error between requested and selected baudrate does not exceed +/-2%. Fix that by requesting actual, exact baudrate used by the serial. Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") Cc: stable <stable@kernel.org> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24serial: amba-pl011: fix high priority character transmission in rs486 modeLino Sanfilippo
commit 4f39aca2360c82dccd2f5179d77e94aab665bea6 upstream. In RS485 mode the transmission of a high priority character fails since it is written to the data register before the transmitter is enabled. Fix this in pl011_tx_chars() by enabling RS485 transmission before writing the character. Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20230108181735.10937-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24serial: pch_uart: Pass correct sg to dma_unmap_sg()Ilpo Järvinen
commit e8914b52e5b024e4af3d810a935fe0805eee8a36 upstream. A local variable sg is used to store scatterlist pointer in pch_dma_tx_complete(). The for loop doing Tx byte accounting before dma_unmap_sg() alters sg in its increment statement. Therefore, the pointer passed into dma_unmap_sg() won't match to the one given to dma_map_sg(). To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg() instead of the local variable. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO bufferKrzysztof Kozlowski
commit b8caf69a6946e18ffebad49847e258f5b6d52ac2 upstream. Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single ↵Greg Kroah-Hartman
IRQ handler" commit 2cbafffbf69addd7509072f4be5917f81d238cf6 upstream. This reverts commit f24771b62a83239f0dce816bddf0f6807f436235 as it is reported to break the build. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com Fixes: f24771b62a83 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Valentin Caron <valentin.caron@foss.st.com> # V3 Cc: Marek Vasut <marex@denx.de> Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handlerMarek Vasut
commit f24771b62a83239f0dce816bddf0f6807f436235 upstream. Requesting an interrupt with IRQF_ONESHOT will run the primary handler in the hard-IRQ context even in the force-threaded mode. The force-threaded mode is used by PREEMPT_RT in order to avoid acquiring sleeping locks (spinlock_t) in hard-IRQ context. This combination makes it impossible and leads to "sleeping while atomic" warnings. Use one interrupt handler for both handlers (primary and secondary) and drop the IRQF_ONESHOT flag which is not needed. Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3 Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230112180417.25595-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18hvc/xen: lock console list traversalRoger Pau Monne
[ Upstream commit c0dccad87cf68fc6012aec7567e354353097ec1a ] The currently lockless access to the xen console list in vtermno_to_xencons() is incorrect, as additions and removals from the list can happen anytime, and as such the traversal of the list to get the private console data for a given termno needs to happen with the lock held. Note users that modify the list already do so with the lock taken. Adjust current lock takers to use the _irq{save,restore} helpers, since the context in which vtermno_to_xencons() is called can have interrupts disabled. Use the _irq{save,restore} set of helpers to switch the current callers to disable interrupts in the locked region. I haven't checked if existing users could instead use the _irq variant, as I think it's safer to use _irq{save,restore} upfront. While there switch from using list_for_each_entry_safe to list_for_each_entry: the current entry cursor won't be removed as part of the code in the loop body, so using the _safe variant is pointless. Fixes: 02e19f9c7cac ('hvc_xen: implement multiconsole support') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: sunsab: Fix error handling in sunsab_init()Yuan Can
[ Upstream commit 1a6ec673fb627c26e2267ca0a03849f91dbd9b40 ] The sunsab_init() returns the platform_driver_register() directly without checking its return value, if platform_driver_register() failed, the allocated sunsab_ports is leaked. Fix by free sunsab_ports and set it to NULL when platform_driver_register() failed. Fixes: c4d37215a824 ("[SERIAL] sunsab: Convert to of_driver framework.") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221123061212.52593-1-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: altera_uart: fix locking in polling modeGabriel Somlo
[ Upstream commit 1307c5d33cce8a41dd77c2571e4df65a5b627feb ] Since altera_uart_interrupt() may also be called from a poll timer in "serving_softirq" context, use spin_[lock_irqsave|unlock_irqrestore] variants, which are appropriate for both softirq and hardware interrupt contexts. Fixes: 2f8b9c15cd88 ("altera_uart: Add support for polling mode (IRQ-less)") Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20221122200426.888349-1-gsomlo@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: pch: Fix PCI device refcount leak in pch_request_dma()Xiongfeng Wang
[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ] As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put(). Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path. Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: stm32: move dma_request_chan() before clk_prepare_enable()Valentin Caron
[ Upstream commit 0d114e9ff940ebad8e88267013bf96c605a6b336 ] If dma_request_chan() returns a PROBE_DEFER error, clk_disable_unprepare() will be called and USART clock will be disabled. But early console can be still active on the same USART. While moving dma_request_chan() before clk_prepare_enable(), the clock won't be taken in case of a DMA PROBE_DEFER error, and so it doesn't need to be disabled. Then USART is still clocked for early console. Fixes: a7770a4bfcf4 ("serial: stm32: defer probe for dma devices") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20221118170602.1057863-1-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.delisun
[ Upstream commit 032d5a71ed378ffc6a2d41a187d8488a4f9fe415 ] Clearing the RX FIFO will cause data loss. Copy the pl011_enabl_interrupts implementation, and remove the clear interrupt and FIFO part of the code. Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle") Signed-off-by: delisun <delisun@pateo.com.cn> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221110020108.7700-1-delisun@pateo.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: amba-pl011: avoid SBSA UART accessing DMACR registerJiamei Xie
[ Upstream commit 94cdb9f33698478b0e7062586633c42c6158a786 ] Chapter "B Generic UART" in "ARM Server Base System Architecture" [1] documentation describes a generic UART interface. Such generic UART does not support DMA. In current code, sbsa_uart_pops and amba_pl011_pops share the same stop_rx operation, which will invoke pl011_dma_rx_stop, leading to an access of the DMACR register. This commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the access to DMACR register for SBSA UARTs which does not support DMA. When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux SBSA PL011 driver will access PL011 DMACR register in some functions. For most real SBSA Pl011 hardware implementations, the DMACR write behaviour will be ignored. So these DMACR operations will not cause obvious problems. But for some virtual SBSA PL011 hardware, like Xen virtual SBSA PL011 (vpl011) device, the behaviour might be different. Xen vpl011 emulation will inject a data abort to guest, when guest is accessing an unimplemented UART register. As Xen VPL011 is SBSA compatible, it will not implement DMACR register. So when Linux SBSA PL011 driver access DMACR register, it will get an unhandled data abort fault and the application will get a segmentation fault: Unhandled fault at 0xffffffc00944d048 Mem abort info: ESR = 0x96000000 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x00: ttbr address size fault Data abort info: ISV = 0, ISS = 0x00000000 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000 [ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13 Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP ... Call trace: pl011_stop_rx+0x70/0x80 tty_port_shutdown+0x7c/0xb4 tty_port_close+0x60/0xcc uart_close+0x34/0x8c tty_release+0x144/0x4c0 __fput+0x78/0x220 ____fput+0x1c/0x30 task_work_run+0x88/0xc0 do_notify_resume+0x8d0/0x123c el0_svc+0xa8/0xc0 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 Code: b9000083 b901f001 794038a0 8b000042 (b9000041) ---[ end trace 83dd93df15c3216f ]--- note: bootlogd[132] exited with preempt_count 1 /etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon This has been discussed in the Xen community, and we think it should fix this in Linux. See [2] for more information. [1] https://developer.arm.com/documentation/den0094/c/?lang=en [2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html Fixes: 0dd1e247fd39 (drivers: PL011: add support for the ARM SBSA generic UART) Signed-off-by: Jiamei Xie <jiamei.xie@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20221117103237.86856-1-jiamei.xie@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: 8250_bcm7271: Fix error handling in brcmuart_init()Yuan Can
[ Upstream commit 6a3ff858915fa8ca36c7eb02c87c9181ae2fc333 ] A problem about 8250_bcm7271 create debugfs failed is triggered with the following log given: [ 324.516635] debugfs: Directory 'bcm7271-uart' with parent '/' already present! The reason is that brcmuart_init() returns platform_driver_register() directly without checking its return value, if platform_driver_register() failed, it returns without destroy the newly created debugfs, resulting the debugfs of 8250_bcm7271 can never be created later. brcmuart_init() debugfs_create_dir() # create debugfs directory platform_driver_register() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when platform_driver_register() returns error. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221109072110.117291-2-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31serial: tegra: Read DMA status before terminatingKartik
[ Upstream commit 109a951a9f1fd8a34ebd1896cbbd5d5cede880a7 ] Read the DMA status before terminating the DMA, as doing so deletes the DMA desc. Also, to get the correct transfer status information, pause the DMA using dmaengine_pause() before reading the DMA status. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Kartik <kkartik@nvidia.com> Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-18Merge tag 'tty-6.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 6.1-rc6. They all resolve reported problems: - kernel doc build problems with the -rc1 serial driver documentation update - n_gsm reported problems - imx serial driver missing callback - lots of tiny 8250 driver fixes for reported issues. All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake serial: 8250_lpss: Configure DMA also w/o DMA filter serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send Revert "tty: n_gsm: replace kicktimer with delayed_work" Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" serial: imx: Add missing .thaw_noirq hook tty: serial: fsl_lpuart: don't break the on-going transfer when global reset serial: 8250: omap: Flush PM QOS work on remove serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
2022-11-09serial: 8250: Flush DMA Rx on RLSIIlpo Järvinen
Returning true from handle_rx_dma() without flushing DMA first creates a data ordering hazard. If DMA Rx has handled any character at the point when RLSI occurs, the non-DMA path handles any pending characters jumping them ahead of those characters that are pending under DMA. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: <stable@vger.kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09serial: 8250_lpss: Use 16B DMA burst with Elkhart LakeIlpo Järvinen
Configure DMA to use 16B burst size with Elkhart Lake. This makes the bus use more efficient and works around an issue which occurs with the previously used 1B. The fix was initially developed by Srikanth Thokala and Aman Kumar. This together with the previous config change is the cleaned up version of the original fix. Fixes: 0a9410b981e9 ("serial: 8250_lpss: Enable DMA on Intel Elkhart Lake") Cc: <stable@vger.kernel.org> # serial: 8250_lpss: Configure DMA also w/o DMA filter Reported-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09serial: 8250_lpss: Configure DMA also w/o DMA filterIlpo Järvinen
If the platform doesn't use DMA device filter (as is the case with Elkhart Lake), whole lpss8250_dma_setup() setup is skipped. This results in skipping also *_maxburst setup which is undesirable. Refactor lpss8250_dma_setup() to configure DMA even if filter is not setup. Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09serial: 8250: Fall back to non-DMA Rx if IIR_RDI occursIlpo Järvinen
DW UART sometimes triggers IIR_RDI during DMA Rx when IIR_RX_TIMEOUT should have been triggered instead. Since IIR_RDI has higher priority than IIR_RX_TIMEOUT, this causes the Rx to hang into interrupt loop. The problem seems to occur at least with some combinations of small-sized transfers (I've reproduced the problem on Elkhart Lake PSE UARTs). If there's already an on-going Rx DMA and IIR_RDI triggers, fall graciously back to non-DMA Rx. That is, behave as if IIR_RX_TIMEOUT had occurred. 8250_omap already considers IIR_RDI similar to this change so its nothing unheard of. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: <stable@vger.kernel.org> Co-developed-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Co-developed-by: Aman Kumar <aman.kumar@intel.com> Signed-off-by: Aman Kumar <aman.kumar@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221108121952.5497-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_sendDuoming Zhou
The function gsm_dlci_t1() is a timer handler that runs in an atomic context, but it calls "kzalloc(..., GFP_KERNEL)" that may sleep. As a result, the sleep-in-atomic-context bug will happen. The process is shown below: gsm_dlci_t1() gsm_dlci_open() gsm_modem_update() gsm_modem_upd_via_msc() gsm_control_send() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20221002040709.27849-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03Revert "tty: n_gsm: replace kicktimer with delayed_work"Fedor Pchelkin
This reverts commit c9ab053e56ce13a949977398c8edc12e6c02fc95. The above commit is reverted as it was a prerequisite for tx_mutex introduction and tx_mutex has been removed as it does not correctly work in order to protect tx data. Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20221008110221.13645-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"Fedor Pchelkin
This reverts commit 902e02ea9385373ce4b142576eef41c642703955. The above commit is reverted as the usage of tx_mutex seems not to solve the problem described in 902e02ea9385 ("tty: n_gsm: avoid call of sleeping functions from atomic context") and just moves the bug to another place. Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20221008110221.13645-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-11 20:39:07 +0000