summary refs log tree commit diff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2023-07-19thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()Christophe JAILLET
[ Upstream commit 89382022b370dfd34eaae9c863baa123fcd4d132 ] Should an error occur after calling sun8i_ths_resource_init() in the probe function, some resources need to be released, as already done in the .remove() function. Switch to the devm_clk_get_enabled() helper and add a new devm_action to turn sun8i_ths_resource_init() into a fully managed function. Move the place where reset_control_deassert() is called so that the recommended order of reset release/clock enable steps is kept. A64 manual states that: 3.3.6.4. Gating and reset Make sure that the reset signal has been released before the release of module clock gating; This fixes the issue and removes some LoC at the same time. Fixes: dccc5c3b6f30 ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/a8ae84bd2dc4b55fe428f8e20f31438bf8bb6762.1684089931.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-01Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak ↵Ricardo Cañuelo
in mtk_thermal_probe" commit 86edac7d3888c715fe3a81bd61f3617ecfe2e1dd upstream. This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26. That change was causing a regression in the generic-adc-thermal-probed bootrr test as reported in the kernelci-results list [1]. A proper rework will take longer, so revert it for now. [1] https://groups.io/g/kernelci-results/message/42660 Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe") Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in ↵Kang Chen
mtk_thermal_probe [ Upstream commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26 ] Smatch reports: 1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released. 2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released. The original code forgets to release iomap resource when handling errors, fix it by switch to devm_of_iomap. Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system") Signed-off-by: Kang Chen <void0red@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11thermal: intel: BXT_PMIC: select REGMAP instead of depending on itRandy Dunlap
[ Upstream commit 1467fb960349dfa5e300658f1a409dde2cfb0c51 ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11thermal: intel: quark_dts: fix error pointer dereferenceDan Carpenter
[ Upstream commit f1b930e740811d416de4d2074da48b6633a672c8 ] If alloc_soc_dts() fails, then we can just return. Trying to free "soc_dts" will lead to an Oops. Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal: intel: powerclamp: Fix cur_state for multi package systemSrinivas Pandruvada
commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream. The powerclamp cooling device cur_state shows actual idle observed by package C-state idle counters. But the implementation is not sufficient for multi package or multi die system. The cur_state value is incorrect. On these systems, these counters must be read from each package/die and somehow aggregate them. But there is no good method for aggregation. It was not a problem when explicit CPU model addition was required to enable intel powerclamp. In this way certain CPU models could have been avoided. But with the removal of CPU model check with the availability of Package C-state counters, the driver is loaded on most of the recent systems. For multi package/die systems, just show the actual target idle state, the system is trying to achieve. In powerclamp this is the user set state minus one. Also there is no use of starting a worker thread for polling package C-state counters and applying any compensation for multiple package or multiple die systems. Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10thermal: intel: intel_pch: Add support for Wellsburg PCHTim Zimmermann
[ Upstream commit 40dc1929089fc844ea06d9f8bdb6211ed4517c2e ] Add the PCI ID for the Wellsburg C610 series chipset PCH. The driver can read the temperature from the Wellsburg PCH with only the PCI ID added and no other modifications. Signed-off-by: Tim Zimmermann <tim@linux4.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal: intel: Fix unsigned comparison with less than zeroYang Li
[ Upstream commit e7fcfe67f9f410736b758969477b17ea285e8e6c ] The return value from the call to intel_tcc_get_tjmax() is int, which can be a negative error code. However, the return value is being assigned to an u32 variable 'tj_max', so making 'tj_max' an int. Eliminate the following warning: ./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0 Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/hisi: Drop second sensor hi3660Yongqin Liu
[ Upstream commit 15cc25829a97c3957e520e971868aacc84341317 ] The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm allocators") exposes a panic "BRK handler: Fatal exception" on the hi3660_thermal_probe funciton. This is because the function allocates memory for only one sensors array entry, but tries to fill up a second one. Fix this by removing the unneeded second access. Fixes: 7d3a2a2bbadb ("thermal/drivers/hisi: Fix number of sensors on hi3660") Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org> Link: https://lore.kernel.org/linux-mm/20221101223321.1326815-5-keescook@chromium.org/ Link: https://lore.kernel.org/r/20230210141507.71014-1-yongqin.liu@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/imx_sc_thermal: Fix the loop conditionViorel Suman
[ Upstream commit 4b26b7c9cdefdcb478047c30901d2379ef9e50fc ] The minimal resource ID is 0: IMX_SC_R_AP_0=0, so fix the loop condition. Aside of this - constify the array. Fixes: 31fd4b9db13b ("thermal/drivers/imx_sc: Rely on the platform data to get the resource id") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20230117091956.61729-1-viorel.suman@oss.nxp.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/imx_sc_thermal: Drop empty platform remove functionUwe Kleine-König
[ Upstream commit 5011a110295d25418f5918a6af7bfcdb00dd4e34 ] A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221212220217.3777176-1-u.kleine-koenig@pengutronix.de Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Stable-dep-of: 4b26b7c9cdef ("thermal/drivers/imx_sc_thermal: Fix the loop condition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/tsens: limit num_sensors to 9 for msm8939Dmitry Baryshkov
[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ] On msm8939 last (hwid=10) sensor was added in the hw revision 3.0. Calibration data for it was placed outside of the main calibration data blob, so it is not accessible by the current blob-parsing code. Moreover data for the sensor's p2 is not contiguous in the fuses. This makes it hard to use nvmem_cell API to parse calibration data in a generic way. Since the sensor doesn't seem to be actually used by the existing hardware, disable the sensor for now. Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/tsens: fix slope values for msm8939Dmitry Baryshkov
[ Upstream commit 5aec3b035e0cbf3f042c2a03d654e5ad6748feb7 ] According to the vendor kernels (msm-3.10, 3.14 and 3.18), msm8939 uses non-standard slope values for calibrating the sensors. Fill them accordingly. Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-8-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/tsens: Sort out msm8976 vs msm8956 dataDmitry Baryshkov
[ Upstream commit a7d3006be5ca7b04e4b84b5ceaae55a700e511bd ] Tsens driver mentions that msm8976 data should be used for both msm8976 and msm8956 SoCs. This is not quite correct, as according to the vendor kernels, msm8976 should use standard slope values (3200), while msm8956 really uses the slope values found in the driver. Add separate compatibility string for msm8956, move slope value overrides to the corresponding init function and use the standard compute_intercept_slope() function for both platforms. Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10thermal/drivers/tsens: Drop msm8976-specific definesDmitry Baryshkov
[ Upstream commit 3bf0ea99e2e32b0335106b86d84404cc85bcd113 ] Drop msm8976-specific defines, which duplicate generic ones. Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-6-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()Rafael J. Wysocki
[ Upstream commit acd7e9ee57c880b99671dd99680cb707b7b5b0ee ] In order to prevent int340x_thermal_get_trip_type() from possibly racing with int340x_thermal_read_trips() invoked by int3403_notify() add locking to it in analogy with int340x_thermal_get_trip_temp(). Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01thermal: intel: int340x: Protect trip temperature from concurrent updatesSrinivas Pandruvada
commit 6757a7abe47bcb12cb2d45661067e182424b0ee3 upstream. Trip temperatures are read using ACPI methods and stored in the memory during zone initializtion and when the firmware sends a notification for change. This trip temperature is returned when the thermal core calls via callback get_trip_temp(). But it is possible that while updating the memory copy of the trips when the firmware sends a notification for change, thermal core is reading the trip temperature via the callback get_trip_temp(). This may return invalid trip temperature. To address this add a mutex to protect the invalid temperature reads in the callback get_trip_temp() and int340x_thermal_read_trips(). Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-01thermal: core: call put_device() only after device_register() failsViresh Kumar
[ Upstream commit 6c54b7bc8a31ce0f7cc7f8deef05067df414f1d8 ] put_device() shouldn't be called before a prior call to device_register(). __thermal_cooling_device_register() doesn't follow that properly and needs fixing. Also thermal_cooling_device_destroy_sysfs() is getting called unnecessarily on few error paths. Fix all this by placing the calls at the right place. Based on initial work done by Caleb Connolly. Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths") Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()") Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01thermal/core: fix error code in __thermal_cooling_device_register()Dan Carpenter
[ Upstream commit e49a1e1ee078aee21006192076a8d93335e0daa9 ] Return an error pointer if ->get_max_state() fails. The current code returns NULL which will cause an oops in the callers. Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 6c54b7bc8a31 ("thermal: core: call put_device() only after device_register() fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01thermal: Validate new state in cur_state_store()Viresh Kumar
[ Upstream commit c408b3d1d9bbc7de5fb0304fea424ef2539da616 ] In cur_state_store(), the new state of the cooling device is received from user-space and is not validated by the thermal core but the same is left for the individual drivers to take care of. Apart from duplicating the code it leaves possibility for introducing bugs where a driver may not do it right. Lets make the thermal core check the new state itself and store the max value in the cooling device structure. Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 6c54b7bc8a31 ("thermal: core: call put_device() only after device_register() fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12thermal: int340x: Add missing attribute for data rate baseSrinivas Pandruvada
commit b878d3ba9bb41cddb73ba4b56e5552f0a638daca upstream. Commit 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")' added rfi_restriction_data_rate_base string, mmio details and documentation, but missed adding attribute to sysfs. Add missing sysfs attribute. Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver") Cc: 5.11+ <stable@vger.kernel.org> # v5.11+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31thermal/core: Ensure that thermal device is registered in thermal_zone_get_tempGuenter Roeck
[ Upstream commit 1c6b30060777352e7881383bab726046d8c3c610 ] Calls to thermal_zone_get_temp() are not protected against thermal zone device removal. As result, it is possible that the thermal zone operations callbacks are no longer valid when thermal_zone_get_temp() is called. This may result in crashes such as BUG: unable to handle page fault for address: ffffffffc04ef420 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 5d60e067 P4D 5d60e067 PUD 5d610067 PMD 110197067 PTE 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 3209 Comm: cat Tainted: G W 5.10.136-19389-g615abc6eb807 #1 02df41ac0b12f3a64f4b34245188d8875bb3bce1 Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.92.0 11/27/2018 RIP: 0010:thermal_zone_get_temp+0x26/0x73 Code: 89 c3 eb d3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 85 ff 74 50 48 89 fb 48 81 ff 00 f0 ff ff 77 44 48 8b 83 98 03 00 00 <48> 83 78 10 00 74 36 49 89 f6 4c 8d bb d8 03 00 00 4c 89 ff e8 9f RSP: 0018:ffffb3758138fd38 EFLAGS: 00010287 RAX: ffffffffc04ef410 RBX: ffff98f14d7fb000 RCX: 0000000000000000 RDX: ffff98f17cf90000 RSI: ffffb3758138fd64 RDI: ffff98f14d7fb000 RBP: ffffb3758138fd50 R08: 0000000000001000 R09: ffff98f17cf90000 R10: 0000000000000000 R11: ffffffff8dacad28 R12: 0000000000001000 R13: ffff98f1793a7d80 R14: ffff98f143231708 R15: ffff98f14d7fb018 FS: 00007ec166097800(0000) GS:ffff98f1bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc04ef420 CR3: 000000010ee9a000 CR4: 00000000003506e0 Call Trace: temp_show+0x31/0x68 dev_attr_show+0x1d/0x4f sysfs_kf_seq_show+0x92/0x107 seq_read_iter+0xf5/0x3f2 vfs_read+0x205/0x379 __x64_sys_read+0x7c/0xe2 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x61/0xc6 if a thermal device is removed while accesses to its device attributes are ongoing. The problem is exposed by code in iwl_op_mode_mvm_start(), which registers a thermal zone device only to unregister it shortly afterwards if an unrelated failure is encountered while accessing the hardware. Check if the thermal zone device is registered after acquiring the thermal zone device mutex to ensure this does not happen. The code was tested by triggering the failure in iwl_op_mode_mvm_start() on purpose. Without this patch, the kernel crashes reliably. The crash is no longer observed after applying this and the preceding patches. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal/drivers/qcom/lmh: Fix irq handler return valueBjorn Andersson
[ Upstream commit 46a891e45be97c6781ac34f5ec777d69370e252b ] After enough invocations the LMh irq is eventually reported as bad, because the handler doesn't return IRQ_HANDLED, fix this. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2Luca Weiss
[ Upstream commit 8763f8acbf8aef22a2321d4c978cd078aa3b8f64 ] On gen2 chips the stage2 threshold is not 140 degC but 125 degC. Make the warning message clearer by using this variable and also by including the temperature that was checked for. Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Amit Kucheria <amitk@kernel.org> Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal/of: Fix memory leak on thermal_of_zone_register() failureIdo Schimmel
[ Upstream commit 7ef2f023c2c77a452ba5d0c9b1ad04a5a895d553 ] The function does not free 'of_ops' upon failure, leading to a memory leak [1]. Fix by freeing 'of_ops' in the error path. [1] unreferenced object 0xffff8ee846198c80 (size 128): comm "swapper/0", pid 1, jiffies 4294699704 (age 70.076s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ d0 3f 6e 8c ff ff ff ff 00 00 00 00 00 00 00 00 .?n............. backtrace: [<00000000d136f562>] __kmalloc_node_track_caller+0x42/0x120 [<0000000063f31678>] kmemdup+0x1d/0x40 [<00000000e6d24096>] thermal_of_zone_register+0x49/0x520 [<000000005e78c755>] devm_thermal_of_zone_register+0x54/0x90 [<00000000ee6b209e>] pmbus_add_sensor+0x1b4/0x1d0 [<00000000896105e3>] pmbus_add_sensor_attrs_one+0x123/0x440 [<0000000049e990a6>] pmbus_add_sensor_attrs+0xfe/0x1d0 [<00000000466b5440>] pmbus_do_probe+0x66b/0x14e0 [<0000000084d42285>] i2c_device_probe+0x13b/0x2f0 [<0000000029e2ae74>] really_probe+0xce/0x2c0 [<00000000692df15c>] driver_probe_device+0x19/0xd0 [<00000000547d9cce>] __device_attach_driver+0x6f/0x100 [<0000000020abd24b>] bus_for_each_drv+0x76/0xc0 [<00000000665d9563>] __device_attach+0xfc/0x180 [<000000008ddd4d6a>] bus_probe_device+0x82/0xa0 [<000000009e61132b>] device_add+0x3fe/0x920 Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20221020103658.802457-1-idosch@nvidia.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal/drivers/k3_j72xx_bandgap: Fix the debug print messageKeerthy
[ Upstream commit a7c42af78b19a11e98a5555a664c343e3a672632 ] The debug print message to check the workaround applicability is inverted. Fix the same. Fixes: ffcb2fc86eb7 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support") Reported-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20221010034126.3550-1-j-keerthy@ti.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal/drivers/imx8mm_thermal: Validate temperature rangeMarcus Folkesson
[ Upstream commit d37edc7370273306d8747097fafa62436c1cfe16 ] Check against the upper temperature limit (125 degrees C) before consider the temperature valid. Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20221014073507.1594844-1-marcus.folkesson@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31thermal: core: fix some possible name leaks in error pathsYang Yingliang
[ Upstream commit 4748f9687caaeefab8578285b97b2f30789fc4b4 ] In some error paths before device_register(), the names allocated by dev_set_name() are not freed. Move dev_set_name() front to device_register(), so the name can be freed while calling put_device(). Fixes: 1dd7128b839f ("thermal/core: Fix null pointer dereference in thermal_release()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-15thermal: intel_powerclamp: Use first online CPU as control_cpuRafael J. Wysocki
Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") fixed an issue related to using smp_processor_id() in preemptible context by replacing it with a pair of get_cpu()/put_cpu(), but what is needed there really is any online CPU and not necessarily the one currently running the code. Arguably, getting the one that's running the code in there is confusing. For this reason, simply give the control CPU role to the first online one which automatically will be CPU0 if it is online, so one check can be dropped from the code for an added benefit. Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/ Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Chen Yu <yu.c.chen@intel.com>
2022-10-10Merge tag 'thermal-6.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These fix assorted issues in the thermal core and ARM thermal drivers. Specifics: - Use platform data to get the sensor ID instead of parsing the device in imx_sc thermal driver and remove the dedicated OF function from the core code (Daniel Lezcano). - Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan Cameron). - Add missing const annotation to the RCar ops thermal driver (Lad Prabhakar). - Drop duplicate parameter check from thermal_zone_device_register_with_trips() (Lad Prabhakar). - Fix NULL pointer dereference in trip_point_temp_store() by making it check if the ->set_trip_temp() operation is present (Lad Prabhakar). - Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal driver (Vincent Knecht)" * tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id thermal/core: Add a check before calling set_trip_temp() thermal/core: Drop valid pointer check for type thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS thermal/of: Remove the thermal_zone_of_get_sensor_id() function thermal/drivers/imx_sc: Rely on the platform data to get the resource id
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_idVincent Knecht
Reading temperature from this sensor fails with 'Invalid argument'. Looking at old vendor dts [1], its hw_id should be 3 instead of 4. Change this hw_id accordingly. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511 Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20220811105014.7194-1-vincent.knecht@mailoo.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/core: Add a check before calling set_trip_temp()Lad Prabhakar
The thermal driver [0] for Renesas RZ/G2L SoC does not implement set_trip_temp() callback but has trips commit 9326167058e8 ("thermal/core: Move set_trip_temp ops to the sysfs code") changed the behaviour which causes the below panic when trying to set the trip temperature: root@smarc-rzg2l:~# echo 51000 > /sys/class/thermal/thermal_zone0/trip_point_0_temp [ 92.461521] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 92.470958] Mem abort info: [ 92.474311] ESR = 0x0000000086000004 [ 92.478546] EC = 0x21: IABT (current EL), IL = 32 bits [ 92.484290] SET = 0, FnV = 0 [ 92.487693] EA = 0, S1PTW = 0 [ 92.491153] FSC = 0x04: level 0 translation fault [ 92.496461] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004e885000 [ 92.503736] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 92.510869] Internal error: Oops: 86000004 [#3] PREEMPT SMP [ 92.516556] CPU: 0 PID: 290 Comm: sh Tainted: G D 6.0.0-rc4-next-20220906-arm64-renesas-00124-g84633c87c5f6-dirty #509 [ 92.528814] Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT) [ 92.535441] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 92.542516] pc : 0x0 [ 92.544764] lr : trip_point_temp_store+0x84/0x140 [ 92.549582] sp : ffff80000a92bc10 [ 92.552961] x29: ffff80000a92bc10 x28: ffff00000d8a45c0 x27: 0000000000000000 [ 92.560249] x26: 0000000000000000 x25: ffff8000082b53e8 x24: ffff00000eaffc20 [ 92.567532] x23: ffff80000a92bd68 x22: ffff00000d3e0f80 x21: 0000000000000006 [ 92.574814] x20: ffff800009149000 x19: ffff00000b8ab000 x18: 0000000000000000 [ 92.582097] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab028cdee0 [ 92.589378] x14: 0000000000000000 x13: 0000000000000000 x12: ffff80000a92bbd0 [ 92.596659] x11: ffff00000d3e0f80 x10: ffff800009149eb8 x9 : 000000000000000a [ 92.603940] x8 : 00000000ffffffc9 x7 : 0000000000000005 x6 : 000000000000002a [ 92.611220] x5 : 000000000000c738 x4 : 00000000ffffffd3 x3 : 0000000000000000 [ 92.618500] x2 : 000000000000c738 x1 : 0000000000000000 x0 : ffff00000b8ab000 [ 92.625781] Call trace: [ 92.628282] 0x0 [ 92.630176] dev_attr_store+0x14/0x28 [ 92.633935] sysfs_kf_write+0x4c/0x70 [ 92.637681] kernfs_fop_write_iter+0x160/0x1e0 [ 92.642213] vfs_write+0x474/0x540 [ 92.645703] ksys_write+0x68/0xf8 [ 92.649100] __arm64_sys_write+0x18/0x20 [ 92.653111] invoke_syscall+0x40/0xf8 [ 92.656866] el0_svc_common.constprop.3+0x88/0x110 [ 92.661758] do_el0_svc+0x20/0x78 [ 92.665158] el0_svc+0x3c/0x90 [ 92.668291] el0t_64_sync_handler+0x90/0xb8 [ 92.672563] el0t_64_sync+0x148/0x14c [ 92.676322] Code: bad PC value [ 92.679453] ---[ end trace 0000000000000000 ]--- /bin/start_getty: line 40: 290 Segmentation fault ${setsid:-} ${getty} -L $1 $2 $3 Poky (Yocto Project Reference Distro) 3.2.1 smarc-rzg2l ttySC0 smarc-rzg2l login: This patch fixes the above issue by adding a check to see if set_trip_temp() callback is implemented before calling it. [0] drivers/thermal/rzg2l_thermal.c Fixes: 9326167058e8 ("thermal/core: Move set_trip_temp ops to the sysfs code") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220908174610.7837-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/core: Drop valid pointer check for typeLad Prabhakar
Drop the valid pointer check for type in thermal_zone_device_register_with_trips() as we already have it confirmed for != NULL from the previous if block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220909181322.10933-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/drivers/rcar_thermal: Constify static thermal_zone_device_opsLad Prabhakar
The only usage of rcar_thermal_zone_of_ops is to pass its address to devm_thermal_of_zone_register(), which takes a pointer to const struct thermal_zone_device_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20220909182838.11154-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on ↵Jonathan Cameron
QCOM_TSENS The SPMI QCOM drivers have no dependency in Kconfig, but the Makefile will not be included without QCOM_TSENS. This unnecessarily reduces build coverage. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220821160032.2206349-1-jic23@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-04thermal/of: Remove the thermal_zone_of_get_sensor_id() functionDaniel Lezcano
The function thermal_zone_of_get_sensor_id() is no longer used anywhere, remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220818082316.2717095-2-daniel.lezcano@linaro.org
2022-10-04thermal/drivers/imx_sc: Rely on the platform data to get the resource idDaniel Lezcano
Currently the imx_sc driver is reimplementing part of the thermal zone parsing from the thermal OF tree code to get the sensor id associated with a thermal zone sensor. The driver platform specific code should know what sensor is present and not rely on the thermal zone description to do a discovery. Well that is arguable but all the other drivers have a per platform data telling what sensor id to use. The imx_sc thermal driver is the only one using a different approach. Not invalid but forcing to keep a specific function 'thermal_zone_of_get_sensor_id()' to get the sensor id for a specific thermal zone as the self-explanatory function tells and having device tree code inside the driver. The thermal OF code had a rework and remains now self-encapsulated with a register/unregister functions and their 'devm' variants, except for the function mentioned above. After investigating, it appears the imx_sc sensor is defined in arch/arm64/boot/dts/freescale/imx8qxp.dtsi: which defines the cpu-thermal zone with the id: IMX_SC_R_SYSTEM This dtsi is included by: - imx8qxp-ai_ml.dts - imx8qxp-colibri.dtsi - imx8qxp-mek.dts The two first ones do not define more thermal zones The third one adds the pmic-thermal0 zone with id: IMX_SC_R_PMIC_0 The thermal OF code returns -ENODEV if the thermal zone registration with a specific id fails because the description is not available in the DT for such a sensor id. In this case we continue with the other ids without bailing out with an error. So we can build for the 'fsl,imx-sc-thermal' a compatible data, an array of sensor ids containing IMX_SC_R_SYSTEM and IMX_SC_R_PMIC_0. The latter won't be found but that will not result in an error but a normal case where we continue the initialization with other ids. Just to clarify, it is what the thermal framework does and what the other drivers are expecting: when a registration fails with -ENODEV this is not an error but a case where the description is not found in the device tree, that be can the entire thermal zones description or a specific thermal zone with an unknown id. There is one small functional change but without impact. When there is no 'thermal-zones' description the probe function was returning '-ENODEV', now it returns zero. When a thermal zone fails to register with an error different from '-ENODEV', the error is detected and returned. Change the code accordingly and remove the OF code from the driver. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220818082316.2717095-1-daniel.lezcano@linaro.org
2022-10-03Merge branches 'thermal-intel' and 'thermal-drivers'Rafael J. Wysocki
Merge thermal control driver changes for 6.1-rc1: - Use module_pci_driver() macro in the int340x processor_thermal driver (Shang XiaoJing). - Use get_cpu() instead of smp_processor_id() in the intel_powerclamp thermal driver to prevent it from crashing and remove unused accounting for IRQ wakes from it (Srinivas Pandruvada). - Consolidate priv->data_vault checks in int340x_thermal (Rafael Wysocki). - Check the policy first in cpufreq_cooling_register() (Xuewen Yan). - Drop redundant error message from da9062-thermal (zhaoxiao). - Drop of_match_ptr() from thermal_mmio (Jean Delvare). * thermal-intel: thermal: int340x: processor_thermal: Use module_pci_driver() macro thermal: intel_powerclamp: Remove accounting for IRQ wakes thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash thermal: int340x_thermal: Consolidate priv->data_vault checks * thermal-drivers: thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register() thermal: da9062-thermal: Drop redundant error message thermal/drivers/thermal_mmio: Drop of_match_ptr()
2022-10-03Merge branch 'thermal-core'Rafael J. Wysocki
Merge core thermal control changes for 6.1-rc1: - Increase maximum number of trip points in the thermal core (Sumeet Pawnikar). - Replace strlcpy() with unused retval with strscpy() in the core thermal control code (Wolfram Sang). - Do not lock thermal zone mutex in the user space governor (Rafael Wysocki) - Rework the device tree initialization, convert the drivers to the new API and remove the old OF code (Daniel Lezcano) - Fix return value to -ENODEV when searching for a specific thermal zone which does not exist (Daniel Lezcano) - Fix the return value inspection in of_thermal_zone_find() (Dan Carpenter) - Fix kernel panic when KASAN is enabled as it detects use after free when unregistering a thermal zone (Daniel Lezcano) - Move the set_trip ops inside the therma sysfs code (Daniel Lezcano) - Remove unnecessary error message as it is already showed in the underlying function (Jiapeng Chong) - Rework the monitoring path and move the locks upper in the call stack to fix some potentials race windows (Daniel Lezcano) - Fix lockdep_assert() warning introduced by the lock rework (Daniel Lezcano) - Revert the Mellanox 'hotter thermal zone' feature because it is already handled in the thermal framework core code (Daniel Lezcano) * thermal-core: (47 commits) thermal: core: Increase maximum number of trip points thermal: move from strlcpy() with unused retval to strscpy() thermal: gov_user_space: Do not lock thermal zone mutex Revert "mlxsw: core: Add the hottest thermal zone detection" thermal/core: Fix lockdep_assert() warning thermal/core: Move the mutex inside the thermal_zone_device_update() function thermal/core: Move the thermal zone lock out of the governors thermal/governors: Group the thermal zone lock inside the throttle function thermal/core: Rework the monitoring a bit thermal/core: Rearm the monitoring only one time thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err() thermal/of: Remove old OF code thermal/core: Move set_trip_temp ops to the sysfs code thermal/drivers/samsung: Switch to new of thermal API regulator/drivers/max8976: Switch to new of thermal API Input: sun4i-ts - switch to new of thermal API iio/drivers/sun4i_gpadc: Switch to new of thermal API hwmon/drivers/core: Switch to new of thermal API hwmon: pm_bus: core: Switch to new of thermal API ata/drivers/ahci_imx: Switch to new of thermal API ...
2022-09-30thermal: core: Increase maximum number of trip pointsSumeet Pawnikar
On one of the Chrome system, if we define more than 12 trip points, probe for thermal sensor fails with "int3403 thermal: probe of INTC1046:03 failed with error -22" and throws an error as "thermal_sys: Error: Incorrect number of thermal trips". The thermal_zone_device_register() interface needs maximum number of trip points supported in a zone as an argument. This number can't exceed THERMAL_MAX_TRIPS, which is currently set to 12. To address this issue, THERMAL_MAX_TRIPS value has to be increased. This interface also has an argument to specify a mask of trips which are writable. This mask is defined as an int. This mask sets the ceiling for increasing maximum number of supported trips. With the current implementation, maximum number of trips can be supported is 31. Also, THERMAL_MAX_TRIPS macro is used in one place only. So, remove THERMAL_MAX_TRIPS macro and compare num_trips directly with using a macro BITS_PER_TYPE(int)-1. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-24thermal: int340x: processor_thermal: Use module_pci_driver() macroShang XiaoJing
Since PCI provides helper macro module_pci_driver(), the module_init/exit code can be replaced with it. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-24nvmem: prefix all symbols with NVMEM_Rafał Miłecki
This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-21thermal: intel_powerclamp: Remove accounting for IRQ wakesSrinivas Pandruvada
There is a static variable "idle_wakeup_counter", which accounts for number of wake ups because of IRQs and take actions to compensate idle injection. This is now read and reset to 0, but never incremented. So all the usage of this counter for idle injection has no use. Also another static variable "reduce_irq", which depends on "idle_wakeup_counter", so remove usage of "reduce_irq" also. Commit feb6cd6a0f9f ("thermal/intel_powerclamp: stop sched tick in forced idle") replaced the local use of "mwait_idle_with_hints" with play_idle(). This removed possibility of updating "idle_wakeup_counter" without change in play_idle(). This change was made in Linux 4.10. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-21thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to ↵Srinivas Pandruvada
avoid crash When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. Suggested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-21Merge tag 'iio-for-6.1a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for 6.1 This includes Nuno Sa's work to move the IIO core over to generic firmware properties rather than having DT specific code paths. Combined with Andy Shevchenko's long term work on drivers, this leaves IIO in a good state for handling other firmware types. New device support - liteon,ltrf216a * New driver and dt bindings to support this Light sensor. - maxim,max11205 * New driver for this 16bit single channel ADC. - memsensing,msa311 * New driver for this accelerometer. Includes a string helper for read/write. - richtek,rtq6056 * New driver and dt binding to support this current monitor used to measure power usage. - yamaha,yas530 * Support the YAS537 variant (series includes several fixes for other parts and new driver features). Staging graduation - adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using the posted RFC of that framework. Features - core * Large rework to make all the core IIO code use generic firmware properties. Includes switching some drivers over as well using newly provided generic interfaces and allowing removal of DT specific ones. * Support for gesture event types for single and double tap. Used in bosch,bma400. - atmel,at91-sama5d2 * Add support for temperature sensor which uses two muxed inputs to estimate the temperature. * Handle trackx bits of EMR register to improve temp sampling accuracy. * Runtime PM support. - liteon,ltrf216a * Add a _raw channel output to allow working around an issue with differing conversions equations that breaks some user space controls. - mexelis,mlx90632 * Support regulator control. - ti,tsc2046 * External reference voltage support. Clean up and minor fixes - Tree-wide * devm_clk_get_enabled() replacements of opencoded equivalent. * Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers). * Various minor warning and similar cleanup such as missing static markings. * strlcpy() to strscpy() for cases where return value not checked. * provide units.h entries for more HZ units and use them in drivers. - dt-bindings cleanup * Drop maintainers listss where the email address is bouncing. * Switch spi devices over to using spi-peripheral.yaml * Add some missing unevaluatedProperties / additionalProperties: false entries. - ABI docs * Add some missing channel type specific sampling frequency entries. * Add parameter names for callback parameters. - MAINTAINERS * Fix wrong ADI forum links. - core * lockdep class per device, to avoid an issue with nest when one IIO device is the consumer of another. * White space tweaks. - asc,dlhl60d * Use get_unaligned_be24 to avoid some unusual data manipulation and masking. - atmel,at91-sama5d2 * Fix wrong max value. * Improve error handling when measuring pressure and touch. * Add locks to remove races on updating oversampling / sampling freq. * Add missing calls in suspend and resume path to ensure state is correctly brought up if buffered capture was in use when suspend happened. * Error out of write_raw() callback if buffered capture enabled to avoid unpredictable behavior. * Handle different versions having different oversampling ratio support and drop excess error checking. * Cleanup magic value defines where the name is just the value and hence hurts readability. * Use read_avail() callback to provide info on possible oversampling ratios. * Correctly handle variable bit depth when doing oversampling on different supported parts. Also handle higher oversampling ratios. - fsl,imx8qxp * Don't ignore errors from regulator_get_voltage() so as to avoid some very surprising scaling. - invensense,icp10100 * Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made sense and is now deprecated. In this driver we just avoid double disabling in some paths. - maxim,max1363 * Drop consumer channel map provision by platform data. There have been better ways of doing this for years and there are no in tree users. - microchip,mcp3911 * Update status to maintained. - qcom,spmi-adc5 * Support measurement of LDO output voltage. - qcom,spmi-adc * Add missing channel available on SM6125 SoC. - st,stmpe * Drop requirement on node name in binding now that driver correctly doesn't enforce it. - stx104 * Move to more appropriate addac directory - ti,am335x * Document ti,am654-adc compatible already in use in tree. - ti,hmc5843 * Move dev_pm_ops out of header and use new pm macros to handle export. - yamaha,yas530 * Minor cleanups. * tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits) iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). iio: adc: max1363: Drop provision to provide an IIO channel map via platform data iio: accel: bma400: Add support for single and double tap events iio: Add new event type gesture and use direction for single and double tap iio: Use per-device lockdep class for mlock iio: adc: add max11205 adc driver dt-bindings: iio: adc: Add max11205 documentation file iio: magnetometer: yamaha-yas530: Use dev_err_probe() iio: magnetometer: yamaha-yas530: Make strings const in chip info iio: magnetometer: yamaha-yas530: Use pointers as driver data iio: adc: tsc2046: silent spi_device_id warning iio: adc: tsc2046: add vref support dt-bindings: iio: adc: ti,tsc2046: add vref-supply property iio: light: ltrf216a: Add raw attribute dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes MAINTAINERS: fix Analog Devices forum links iio/accel: fix repeated words in comments dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver iio: add MEMSensing MSA311 3-axis accelerometer driver dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd. ...
2022-09-03thermal: int340x_thermal: Consolidate priv->data_vault checksRafael J. Wysocki
It is sufficient to check priv->data_vault once in the error code path of int3400_thermal_probe(), so do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-03thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()Xuewen Yan
Since the policy needs to be accessed first when obtaining cpu devices, first check whether the policy is legal before this. Fixes: 5130802ddbb1 ("thermal: cpu_cooling: Switch to QoS requests for freq limits") Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-03thermal: Drop duplicate words from commentsJilin Yuan
Drop duplicate words from two kerneldoc comments in the thermal subsystem. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> [ rjw: Subject edits and changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-22 08:52:32 +0000