summary refs log tree commit diff
path: root/drivers/scsi/mpt3sas
AgeCommit message (Collapse)Author
2022-07-26scsi: mpt3sas: Stop fw fault watchdog work item during system shutdownDavid Jeffery
During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@redhat.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: mpt3sas: Update driver version to 42.100.00.00Sreekanth Reddy
Update driver version to 42.100.00.00. Link: https://lore.kernel.org/r/20220511072621.30657-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: mpt3sas: Fix junk chars displayed while printing ChipNameSreekanth Reddy
Terminate string after copying 16 bytes of ChipName data from Manufacturing Page0 to prevent %s from printing junk characters. Link: https://lore.kernel.org/r/20220511072621.30657-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpt3sas: Use cached ATA Information VPD pageMartin K. Petersen
We now cache VPD page 0x89 (ATA Information) so there is no need to request it from the hardware. Make mpt3sas use the cached page. Link: https://lore.kernel.org/r/20220302053559.32147-2-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-25scsi: mpt3sas: Fix adapter replyPostRegisterIndex declarationDamien Le Moal
The replyPostRegisterIndex array of struct MPT3SAS_ADAPTER stores iomem resource addresses. Fix its declaration to annotate it with __iomem to avoid sparse warnings for writel() calls using the stored addresses. Link: https://lore.kernel.org/r/20220307234854.148145-6-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-25scsi: mpt3sas: Fix event callback log_code value handlingDamien Le Moal
In mpt3sas_scsih_event_callback(), fix a sparse warning when testing the event log code value by replacing the use of a pointer to the address storing the event log code with a log code local variable. Doing so, le32_to_cpu() is used when the log code value is assigned, avoiding a sparse warning. Link: https://lore.kernel.org/r/20220307234854.148145-5-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-25scsi: mpt3sas: Fix ioc->base_readl() useDamien Le Moal
The functions _base_readl_aero() and _base_readl() used for an adapter base_readl() method are implemented using a regular readl() call which internally performs a conversion to CPU endianness (le32_to_cpu()) of the values read. The users of the ioc base_readl() method should thus not convert again the values read using le16_to_cpu(). Fixing this removes sparse warnings. Link: https://lore.kernel.org/r/20220307234854.148145-4-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-25scsi: mpt3sas: Fix writel() useDamien Le Moal
writel() internally executes cpu_to_le32() to convert the value being written to little endian. The caller should thus not use this conversion function for the value passed to writel(). Remove the cpu_to_le32() calls in _base_put_smid_scsi_io_atomic(), _base_put_smid_fast_path_atomic(), _base_put_smid_hi_priority_atomic() _base_put_smid_default_atomic() and _base_handshake_req_reply_wait(). Link: https://lore.kernel.org/r/20220307234854.148145-3-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-25scsi: mpt3sas: Fix _ctl_set_task_mid() TaskMID checkDamien Le Moal
The TaskMID field of struct Mpi2SCSITaskManagementRequest_t is a 16-bit little endian value. Fix the search loop in _ctl_set_task_mid() to add a cpu_to_le16() conversion before checking the value of TaskMID to avoid sparse warnings. While at it, simplify the search loop code to remove an unnecessarily complicated if condition. Link: https://lore.kernel.org/r/20220307234854.148145-2-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: mpt3sas: Fail reset operation if config request timed outSreekanth Reddy
As part of controller reset operation the driver issues a config request command. If this command gets times out, then fail the controller reset operation instead of retrying it. Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc commentDamien Le Moal
The start_addres argument of mpt3sas_check_same_4gb_region() was misnamed in the function kdoc comment, resulting in the following warning when compiling with W=1. drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Function parameter or member 'start_address' not described in 'mpt3sas_check_same_4gb_region' drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Excess function parameter 'reply_pool_start_address' description in 'mpt3sas_check_same_4gb_region' Fix the argument name in the function kdoc comment to avoid it. While at it, remove a useless blank line between the kdoc and function code. Link: https://lore.kernel.org/r/20220404050041.594774-1-damien.lemoal@opensource.wdc.com Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-06Merge branch '5.18/scsi-queue' into 5.18/scsi-fixesMartin K. Petersen
Pull the remaining commits from 5.18/scsi-queue into fixes. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()Damien Le Moal
The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure. Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...
2022-03-14scsi: mpt3sas: Page fault in reply q processingMatt Lupfer
A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. At the end of the full list traversal the pointer is invalid. Move the _base_process_reply_queue() call inside of the loop. Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-08scsi: mpt3sas: Fix incorrect 4GB boundary checkSreekanth Reddy
The driver must perform its 4GB boundary check using the pool's DMA address instead of using the virtual address. Link: https://lore.kernel.org/r/20220303140230.13098-1-sreekanth.reddy@broadcom.com Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-08scsi: mpt3sas: Remove scsi_dma_map() error messagesSreekanth Reddy
When scsi_dma_map() fails by returning a sges_left value less than zero, the amount of logging produced can be extremely high. In a recent end-user environment, 1200 messages per second were being sent to the log buffer. This eventually overwhelmed the system and it stalled. These error messages are not needed. Remove them. Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: mpt3sas: Convert to flexible arraysKees Cook
This converts to a flexible array instead of the old-style 1-element arrays. The existing code already did the correct math for finding the size of the resulting flexible array structure, so there is no binary difference. The other two structures converted to use flexible arrays appear to have no users at all. Link: https://lore.kernel.org/r/20220201223948.1455637-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: nsp_cs: Check of ioremap return value scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl() scsi: ufs: Modify Tactive time setting conditions scsi: efct: Remove useless DMA-32 fallback configuration scsi: message: fusion: mptctl: Use dma_alloc_coherent() scsi: message: fusion: mptsas: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info() scsi: message: fusion: mptbase: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory() scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API scsi: megaraid: Avoid mismatched storage type sizes scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy() scsi: aic79xx: Remove redundant error variable scsi: pm80xx: Port reset timeout error handling correction scsi: mpi3mr: Fix formatting problems in some kernel-doc comments scsi: mpi3mr: Fix some spelling mistakes scsi: mpt3sas: Update persistent trigger pages from sysfs interface scsi: core: Fix scsi_mode_select() interface scsi: aacraid: Fix spelling of "its" scsi: qedf: Fix potential dereference of NULL pointer
2022-01-05scsi: mpt3sas: Update persistent trigger pages from sysfs interfaceSuganath Prabu S
Store sysfs-provided trigger values into the corresponding persistent trigger pages. Otherwise trigger entries are not persistent across system reboots. Link: https://lore.kernel.org/r/20211227053055.289537-1-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-10scsi: mpt3sas: Use irq_set_affinity_and_hint()Nitesh Narayan Lal
The driver uses irq_set_affinity_hint() specifically for the high IOPS queue interrupts for two purposes: - To set the affinity_hint which is consumed by the userspace for distributing the interrupts - To apply an affinity that it provides The driver enforces its own affinity to bind the high IOPS queue interrupts to the local NUMA node. However, irq_set_affinity_hint() applying the provided cpumask as an affinity (if not NULL) for the interrupt is an undocumented side effect. To remove this side effect irq_set_affinity_hint() has been marked as deprecated and new interfaces have been introduced. Hence, replace the irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint() where the provided mask needs to be applied as the affinity and affinity_hint pointer needs to be set and replace with irq_update_affinity_hint() where only affinity_hint needs to be updated. Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20210903152430.244937-6-nitesh@redhat.com
2021-11-18scsi: mpt3sas: Fix incorrect system timestampSreekanth Reddy
For updating the IOC firmware's timestamp with system timestamp, the driver issues the Mpi26IoUnitControlRequest message. While framing the Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the current timestamp into IOCParameterValue field and the higher 32 bits into Reserved7 field. Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.com Fixes: f98790c00375 ("scsi: mpt3sas: Sync time periodically between driver and firmware") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: mpt3sas: Fix system going into read-only modeSreekanth Reddy
While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy
While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-29scsi: mpt3sas: Fix reference tag handling for WRITE_INSERTMartin K. Petersen
Testing revealed a problem with how the reference tag was handled for a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when the controller is asked to generate the protection information (i.e. not DIX). And as a result the initial reference tag would not be set in the WRITE_INSERT case. Separate handling of the REF_CHECK and REF_INCREMENT flags to align with both the DIX spec and the MPI implementation. Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com Fixes: b3e2c72af1d5 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-20scsi: mpt3sas: Make mpt3sas_dev_attrs staticJiapeng Chong
This symbol is not used outside of mpt3sas_ctl.c, mark it static. Fixes the following sparse warning: drivers/scsi/mpt3sas/mpt3sas_ctl.c:3988:18: warning: symbol 'mpt3sas_dev_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/1634639239-2892-1-git-send-email-jiapeng.chong@linux.alibaba.com Fixes: 1bb3ca27d2ca ("scsi: mpt3sas: Switch to attribute groups") Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: mpt3sas: Switch to attribute groupsBart Van Assche
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-30-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: mpt3sas: Call scsi_done() directlyBart Van Assche
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-53-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-13scsi: mpt3sas: Clean up some inconsistent indentingColin Ian King
There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-13scsi: mpt3sas: Call cpu_relax() before calling udelay()Sreekanth Reddy
Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, qla2xxx, target, smartpqi, lpfc, mpt3sas). The core change causing the most churn was replacing the command request field request with a macro, allowing us to offset map to it and remove the redundant field; the same was also done for the tag field. The most impactful change is the final removal of scsi_ioctl, which has been deprecated for over a decade" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits) scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1 scsi: ufs: ufs-exynos: Fix static checker warning scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Copyright updates for 14.0.0.1 patches scsi: lpfc: Update lpfc version to 14.0.0.1 scsi: lpfc: Add bsg support for retrieving adapter cmf data scsi: lpfc: Add cmf_info sysfs entry scsi: lpfc: Add debugfs support for cm framework buffers scsi: lpfc: Add support for maintaining the cm statistics buffer scsi: lpfc: Add rx monitoring statistics scsi: lpfc: Add support for the CM framework scsi: lpfc: Add cmfsync WQE support scsi: lpfc: Add support for cm enablement buffer scsi: lpfc: Add cm statistics buffer support scsi: lpfc: Add EDC ELS support scsi: lpfc: Expand FPIN and RDF receive logging scsi: lpfc: Add MIB feature enablement support scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware scsi: fc: Add EDC ELS definition ...
2021-08-24scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PIMartin K. Petersen
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210817025014.12085-2-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11Merge branch '5.14/scsi-fixes' into 5.15/scsi-stagingMartin K. Petersen
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-31-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09scsi: mpt3sas: Fix incorrectly assigned error return and checkColin Ian King
Currently the call to _base_static_config_pages() is assigning the error return to variable 'rc' but checking the error return in error 'r'. Fix this by assigning the error return to variable 'r' instead of 'rc'. Link: https://lore.kernel.org/r/20210804134940.114011-1-colin.king@canonical.com Fixes: 19a622c39a9d ("scsi: mpt3sas: Handle firmware faults during first half of IOC init") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2021-08-09scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttributeDamien Le Moal
Similarly to AHCI, introduce the device sysfs attribute sas_ncq_prio_supported to advertise if a SATA device supports the NCQ priority feature. Without this new attribute, the user can only discover if a SATA device supports NCQ priority by trying to enable the feature use with the sas_ncq_prio_enable sysfs device attribute, which fails when the device does not support high prioity commands. Link: https://lore.kernel.org/r/20210807041859.579409-11-damien.lemoal@wdc.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09scsi: mpt3sas: Update driver version to 39.100.00.00Suganath Prabu S
Update driver version to 39.100.00.00. Link: https://lore.kernel.org/r/20210809072639.21228-3-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09scsi: mpt3sas: Use firmware recommended queue depthSuganath Prabu S
Currently, the mpt3sas driver sets the default queue depth based on the physical interface of the attached device: - SAS : 254 - SATA: 32 - NVMe: 128 The IOC firmware provides a recommended queue depth for each device through SAS IO Unit Page1 for SAS/SATA and PCIe IO Unit Page 1 for NVMe devices. If the host sets the queue depth greater than the firmware recommended value, then the IOC places the I/Os above the recommended queue depth in an internal pending queue. This consumes outstanding host-credit/resources, thereby leading to potential starvation of other devices. To avoid this, use the device depth recommended by the IOC firmware. Link: https://lore.kernel.org/r/20210809072639.21228-2-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09scsi: mpt3sas: Bump driver version to 38.100.00.00Sreekanth Reddy
Bump driver version to 38.100.00.00. Link: https://lore.kernel.org/r/20210803065134.19090-1-sreekanth.reddy@broadcom.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09scsi: mpt3sas: Add io_uring iopoll supportSreekanth Reddy
Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X vectors associated with queues dedicated to polling. The IOC hardware is single submission queue and multiple reply queue. However, using the shared host tagset support it is possible to simulate multiple hardware queues. When poll_queues are enabled through the module parameter, the driver will allocate extra reply queues without an MSI-X association. All I/O completion on these queues will be done through the iopoll interface. Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: mpt3sas: Transition IOC to Ready state during shutdownSreekanth Reddy
The IOC firmware assumes that the host driver is still alive after shutdown and continues to post events to host memory (due to faulty expander phy links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC memory access). Perform an IOC soft reset as part of shutdown to disable event posting. Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-18scsi: mpt3sas: Fix error return value in _scsih_expander_add()Zhen Lei
When an expander does not contain any 'phys', an appropriate error code -1 should be returned, as done elsewhere in this function. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned. Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-18scsi: mpt3sas: Fix Coverity reported issueSuganath Prabu S
Fix the structurally dead code (UNREACHABLE) type of error reported by Coverity. Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@broadcom.com Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02Merge branch '5.14/scsi-result' into 5.14/scsi-stagingMartin K. Petersen
Include Hannes' SCSI command result rework in the staging branch. [mkp: remove DRIVER_SENSE from mpi3mr] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: mpt3sas: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Introduce scsi_build_sense()Hannes Reinecke
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status. Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: mpt3sas: Handle firmware faults during second half of IOC initSuganath Prabu S
If a firmware fault occurs while scanning the devices during IOC initialization then the driver issues the hard reset operation to recover the IOC. However, the driver is not issuing a Port enable request message as part of hard reset operation during IOC initialization. Due to this, the driver will not receive get any device discovery-related events and hence devices will not be accessible. Teach the driver to gracefully handle firmware faults while scanning for target devices during IOC initialization. Make the driver issue a port enable request message as part of hard reset operation. This permits receiving device discovery-related events from the firmware after the hard reset operation completes. Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: mpt3sas: Handle firmware faults during first half of IOC initSuganath Prabu S
During first half of IOC initialization (i.e. before going for device scanning), if any firmware fault occurs then driver is aborting the IOC initialization operation. Modify the driver to issue a diag reset operation to recover IOC from fault state and reinitialize the IOC. Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-27 19:32:36 +0000