| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 95339f40a8b652b5b1773def31e63fc53c26378a ]
The logic used for power_supply_is_system_supplied() counts all power
supplies and assumes that the system is running from AC if there is
either a non-battery power-supply reporting to be online or if no
power-supplies exist at all.
The second rule is for desktop systems, that don't have any
battery/charger devices. These systems will incorrectly report to be
powered from battery once a device scope power-supply is registered
(e.g. a HID device), since these power-supplies increase the counter.
Apart from HID devices, recent dGPUs provide UCSI power supplies on a
desktop systems. The dGPU by default doesn't have anything plugged in so
it's 'offline'. This makes power_supply_is_system_supplied() return 0
with a count of 1 meaning all drivers that use this get a wrong judgement.
To fix this case adjust the logic to also examine the scope of the power
supply. If the power supply is deemed a device power supply, then don't
count it.
Cc: Evan Quan <Evan.Quan@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 155c45a25679f571c2ae57d10db843a9dfc63430 ]
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59dddea9879713423c7b2ade43c423bb71e0d216 ]
Use mod_delayed_work() instead of separate cancel_delayed_work_sync() +
schedule_delayed_work() calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4d5c129d6c8993fe96e9ae712141eedcb9ca68c2 ]
sc27xx_fgu_external_power_changed() dereferences data->battery,
which gets sets in ab8500_btemp_probe() like this:
data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
&fgu_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where sc27xx_fgu_external_power_changed() may get called while
data->battery has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in data->battery,
so sc27xx_fgu_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
After this change sc27xx_fgu_external_power_changed() is reduced to just
"power_supply_changed(psy);" and it has the same prototype. While at it
simply replace it with making the external_power_changed callback
directly point to power_supply_changed.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a5299ce4e96f3e8930e9c051b28d8093ada87b08 ]
ab8500_btemp_external_power_changed() dereferences di->btemp_psy,
which gets sets in ab8500_btemp_probe() like this:
di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
&psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where ab8500_btemp_external_power_changed() may get called while
di->btemp_psy has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in di->btemp_psy,
so ab8500_btemp_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
And the same applies to ab8500_fg_external_power_changed().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream.
CHARGE_INHIBITED bit position of the ChargerStatus register is actually
0 not 1. This patch corrects it.
Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver")
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 77c2a3097d7029441e8a91aa0de1b4e5464593da upstream.
The bq24192 model relies on external charger-type detection and once
that is done the bq24190_charger code will update the input current.
In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).
On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current. This allows the fuel-gauge driver to timely recheck
if the battery is charging after the new input current has been applied
and then it can immediately notify userspace about this.
Fixes: 18f8e6f695ac ("power: supply: bq24190_charger: Get input_current_limit from our supplier")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
current or voltage
commit ad3d9c779b1f09f3f3a6fefd07af407c7bc7c9a7 upstream.
The bq25892 model relies on external charger-type detection and once
that is done the bq25890_charger code will update the input current
and if pumpexpress is used also the input voltage.
In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).
On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current or voltage. This allows the fuel-gauge driver
to timely recheck if the battery is charging after the new input
settings have been applied and then it can immediately notify
userspace about this.
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
stabilize
commit 59a99cd462fbdf71f4e845e09f37783035088b4f upstream.
bq27xxx_external_power_changed() gets called when the charger is plugged
in or out. Rather then immediately scheduling an update wait 0.5 seconds
for things to stabilize, so that e.g. the (dis)charge current is stable
when bq27xxx_battery_update() runs.
Fixes: 740b755a3b34 ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sign changes
commit 939a116142012926e25de0ea6b7e2f8d86a5f1b6 upstream.
On gauges where the current register is signed, there is no charging
flag in the flags register. So only checking flags will not result
in power_supply_changed() getting called when e.g. a charger is plugged
in and the current sign changes from negative (discharging) to
positive (charging).
This causes userspace's notion of the status to lag until userspace
does a poll.
And when a power_supply_leds.c LED trigger is used to indicate charging
status with a LED, this LED will lag until the capacity percentage
changes, which may take many minutes (because the LED trigger only is
updated on power_supply_changed() calls).
Fix this by calling bq27xxx_battery_current_and_status() on gauges with
a signed current register and checking if the status has changed.
Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff4c4a2a4437a6d03787c7aafb2617f20c3ef45f upstream.
Move the bq27xxx_battery_update() functions to below
the bq27xxx_battery_current_and_status() function.
This is just moving a block of text, no functional changes.
This is a preparation patch for making bq27xxx_battery_update() check
the status and have it call power_supply_changed() on status changes.
Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bq27xxx_battery_current_and_status()
commit 35092c5819f8c5acc7bafe3fdbb13d6307c4f5e1 upstream.
Add a cache parameter to bq27xxx_battery_current_and_status() so that
it can optionally use cached flags instead of re-reading them itself.
This is a preparation patch for making bq27xxx_battery_update() check
the status and have it call power_supply_changed() on status changes.
Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.
Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.
There are 2 problems with this:
1. If the driver is unbound through sysfs, rather then the module being
rmmod-ed, this changes poll_interval unexpectedly
2. This is racy, after it being set poll_interval could be changed
before bq27xxx_battery_update() checks it through
/sys/module/bq27xxx_battery/parameters/poll_interval
Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.
There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.
Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item.
Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream.
devm_request_threaded_irq() requested IRQs are only free-ed after
the driver's remove function has ran. So the IRQ could trigger and
call bq27xxx_battery_update() after bq27xxx_battery_teardown() has
already run.
Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove()
to fix this.
Fixes: 8807feb91b76 ("power: bq27xxx_battery: Add interrupt handling support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream.
bq27xxx_battery_update() assumes / requires that it is only run once,
not multiple times at the same time. But there are 3 possible callers:
1. bq27xxx_battery_poll() delayed_work item handler
2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler
3. bq27xxx_battery_setup()
And there is no protection against these racing with each other,
fix this race condition by making all callers take di->lock:
- Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked()
- Add new bq27xxx_battery_update() which takes di->lock and then calls
bq27xxx_battery_update_unlocked()
- Make stale cache check code in bq27xxx_battery_get_property(), which
already takes di->lock directly to check the jiffies, call
bq27xxx_battery_update_unlocked() instead of messing with
the delayed_work item
- Make bq27xxx_battery_update_unlocked() mod the delayed-work item
so that the next poll is delayed to poll_interval milliseconds after
the last update independent of the source of the update
Fixes: 740b755a3b34 ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mt6360_charger_probe
commit 4cbb0d358883a27e432714b5256f0362946f5e25 upstream.
devm_work_autocancel may fail, add a check and return early.
Fixes: 0402e8ebb8b86 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4484643991e0f6b89060092563f0dbab9450cbb upstream.
When a battery's status changes from charging to full then
the charging-blink-full-solid trigger tries to change
the LED from blinking to solid/on.
As is documented in include/linux/leds.h to deactivate blinking /
to make the LED solid a LED_OFF must be send:
"""
* Deactivate blinking again when the brightness is set to LED_OFF
* via the brightness_set() callback.
"""
led_set_brighness() calls with a brightness value other then 0 / LED_OFF
merely change the brightness of the LED in its on state while it is
blinking.
So power_supply_update_bat_leds() must first send a LED_OFF event
before the LED_FULL to disable blinking.
Fixes: 6501f728c56f ("power_supply: Add new LED trigger charging-blink-solid-full")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 029a443b9b6424170f00f6dd5b7682e682cce92e upstream.
bq25890_charger_external_power_changed() dereferences bq->charger,
which gets sets in bq25890_power_supply_init() like this:
bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where bq25890_charger_external_power_changed() may get called while
bq->charger has not been set yet leading to a NULL pointer dereference.
This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f
when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting
the connected charger-type which happens to exactly hit the small window:
BUG: kernel NULL pointer dereference, address: 0000000000000018
<snip>
RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0
<snip>
Call Trace:
<TASK>
__power_supply_get_supplier_property+0x19/0x50
class_for_each_device+0xb1/0xe0
power_supply_get_property_from_supplier+0x2e/0x50
bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger]
__power_supply_changed_work+0x30/0x40
class_for_each_device+0xb1/0xe0
power_supply_changed_work+0x5f/0xe0
<snip>
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in bq->charger,
so bq25890_charger_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Cc: stable@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8319774d6f1567d6e7d03653174ab0c82c5c66d upstream.
fuel_gauge_external_power_changed() dereferences info->bat,
which gets sets in axp288_fuel_gauge_probe() like this:
info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where fuel_gauge_external_power_changed() may get called while
info->bat has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in info->bat,
so fuel_gauge_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
Fixes: 30abb3d07929 ("power: supply: axp288_fuel_gauge: Take lock before updating the valid flag")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit baba1315a74d12772d4940a05d58dc03e6ec0635 ]
When the SOC approaches zero, an integer overflows in the columb
counter causing the driver to react poorly. This makes the driver
think it's at (above) the fully charged capacity when in fact it's
zero. It would then write this full capacity to NVRAM which would be
used on boot if the device remained off for less than 5 hours and
not plugged in.
This can be fixed and guarded against by doing the following:
- Changing the type of tmp in rk817_read_or_set_full_charge_on_boot()
to be an int instead of a u32. That way we can account for negative
numbers.
- Guard against negative values for the full charge on boot by setting
the charge to 0 if the system charge reports less than 0.
- Catch scenarios where the battery voltage is below the design
minimum voltage and set the system SOC to 0 at that time and update
the columb counter with a charge level of 0.
- Change the off time value from 5 hours to 30 minutes before we
recalculate the current capacity based on the OCV tables.
These changes allow the driver to operate better at low voltage/low
capacity conditions.
Fixes: 3268a4d9b0b8 ("power: supply: rk817: Fix unsigned comparison with less than zero")
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44263f50065969f2344808388bd589740f026167 ]
power-supply properties are reported in µV, µA and µW.
The IIO API provides mV, mA, mW, so the values need to
be multiplied by 1000.
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf6c880d5d1448489ebf92e2d13d5713ff644930 ]
Variable 'pirq', which may receive negative value
in platform_get_irq().
Used as an index in a function regmap_irq_get_virq().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14c76b2e75bca4d96e2b85a0c12aa43e84fe3f74 ]
This doesn't need to be printed every second as an error:
...
<3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
...
Reduce priority from ERROR to DEBUG.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3268a4d9b0b85a4382e93bdf7be5400a73db74c5 ]
The tmp is defined as u32 type, which results in invalid processing of
tmp<0 in function rk817_read_or_set_full_charge_on_boot(). Therefore,
drop the comparison.
drivers/power/supply/rk817_charger.c:828 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero.
drivers/power/supply/rk817_charger.c:788 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3444
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
to race condition
[ Upstream commit 06615d11cc78162dfd5116efb71f29eb29502d37 ]
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes: c1a281e34dae ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
condition
[ Upstream commit 47c29d69212911f50bdcdd0564b5999a559010d4 ]
In bq24190_probe, &bdi->input_current_limit_work is bound
with bq24190_input_current_limit_work. When external power
changed, it will call bq24190_charger_external_power_changed
to start the work.
If we remove the module which will call bq24190_remove to make
cleanup, there may be a unfinished work. The possible
sequence is as follows:
CPU0 CPUc1
|bq24190_input_current_limit_work
bq24190_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_get_property_from_supplier
| //use
Fix it by finishing the work before cleanup in the bq24190_remove
Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c85c191694cb1cf290b11059b3d2de8a2732ffd0 ]
The rn5t618 power driver fails to register
a cooling device because POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX
is missing but availability is not checked before registering
cooling device. After improved error checking in the thermal
code, the registration of the power supply fails entirely.
Checking for availability of _MAX before registering cooling device
fixes the rn5t618 problem. But the whole logic feels questionable.
First, the logic is inverted here:
the code tells: max_current = max_cooling but
0 = max_cooling, so there needs to be some inversion
in the code which cannot be found. Comparing with other
cooling devices, it can be found that value for fan speed is not
inverted, value for cpufreq cooling is inverted (similar situation
as here lowest frequency = max cooling)
Second, analyzing usage of _MAX: it is seems that maximum capabilities
of charging controller are specified and not of the battery. Probably
there is not too much mismatch in the drivers actually implementing
that. So nothing has exploded yet. So there is no easy and safe way
to specifify a max cooling value now.
Conclusion for now (as a regression fix) just remove the cooling device
registration and do it properly later on.
Fixes: e49a1e1ee078 ("thermal/core: fix error code in __thermal_cooling_device_register()")
Fixes: 952aeeb3ee28 ("power_supply: Register power supply for thermal cooling device")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 104bb8a663451404a26331263ce5b96c34504049 ]
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7aaa80098d5b7608b2dc1e883e3c3f929415243 ]
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5cddca2351b291c8787b45cd046b1dfeb86979f ]
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f5c10ecaf3fdeba9b2b0af5301977420c2c4df0 ]
Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54c03bfd094fb74f9533a9c28250219afe182382 ]
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4d33381b134da188ccd1084aef21e2b8c3c422e ]
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97f2b4ddb0aa700d673691a7d5e44d226d22bab7 ]
cw_bat_probe() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
cw_bat_probe()
create_singlethread_workqueue() # failed, cw_bat->wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 955bee204f3dd307642c101b75e370662987e735 ]
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
Fixes: a3b4388ea19b ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
__power_supply_register()
[ Upstream commit 5b79480ce1978864ac3f06f2134dfa3b6691fe74 ]
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
dump_stack_lvl+0x68/0x85
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x1b1/0x1d0
kobject_add_internal+0x143/0x390
kobject_add+0x108/0x170
Fixes: 80c6463e2fa3 ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The call thermal_zone_get_zone_by_name() used to return the
thermal zone right away, but recent refactorings in the
thermal core has changed this so the thermal zone used by
the battery is probed later, and the call returns -ENODEV.
This was always quite fragile. If we get -ENODEV, then
return a -EPROBE_DEFER and try again later.
Cc: phone-devel@vger.kernel.org
Fixes: 2b0e7ac0841b ("power: supply: ab8500: Integrate thermal zone")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When current is larger than ~2A, the multiplication in current_now
property overflows and the kernel reports invalid negative current
value. Change the numerator and denominator while preserving their
ratio to allow up to +-6A before the overflow.
Fixes: 75853406fa27 ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Samuel Holland <samuel@sholland.org>
[use 149197/200 instead of 261095/350 as suggested by Samuel]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Change return value of rk817_chg_cur_to_reg from u8 to int. If the
function fails to find a suitable value it returns a -EINVAL, but
defined as a u8 it would not return correctly. Additionally, change
defined variable that stores return value from u8 to int.
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This code checks "->chg_ps" twice when it was supposed to check
"->bat_ps".
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- new maintenance charging documentation
- mt6370: new charger driver
- bq25890: support input current limit
- added Qualcomm PMK8350 PON support
- misc minor fixes
* tag 'for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (22 commits)
power: supply: ab8500: remove unused static local variable
power: supply: mt6370: Fix return value check in mt6370_chg_probe()
power: supply: ab8500: Remove unused struct ab8500_chargalg_sysfs_entry
power: supply: mt6370: uses IIO interfaces, depends on IIO
power: supply: max1721x: Fix spelling mistake "Gauage" -> "Gauge"
power: supply: mt6370: Add MediaTek MT6370 charger driver
dt-bindings: power: supply: Add MediaTek MT6370 Charger
lib: add linear range index macro
power: supply: bq25890: Fix enum conversion in bq25890_power_supply_set_property()
power: supply: bq27xxx: fix NULL vs 0 warnings
power: supply: bq27xxx: fix __be16 warnings
power: supply: bq25890: Add support for setting IINLIM
power: supply: bq25890: Disable PUMPX_EN on errors
power: supply: Fix repeated word in comments
power: supply: adp5061: show unknown capacity_level as text
power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
power: supply: tps65217: Fix comments typo
power: reset: qcom-pon: add support for qcom,pmk8350-pon compatible string
dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"
power: supply: cw2015: Use device managed API to simplify the code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Fix 'mfd_of_node_list' OF node entry resource leak
New Drivers:
- Add support for Ocelot VSC7512 Networking Chip
- Add support for MediaTek MT6370 subPMIC
- Add support for Richtek RT5120 (I2C) PMIC
New Device Support:
- Add support for Rockchip RV1126 and RK3588 to Syscon
- Add support for Rockchip RK817 Battery Charger to RK808
- Add support for Silergy SY7636a Voltage Regulator to Simple MFD
- Add support for Qualcomm PMP8074 PMIC to QCOM SPMI
- Add support for Secure Update to Intel M10 BMC
New Functionality:
- Provide SSP type to Intel's LPSS (PCI) SPI driver
Fix-ups:
- Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon
- Unify / simplify; intel_soc_pmic_crc
- Trivial reordering / spelling, etc; Makefile, twl-core
- Convert to managed resources; intel_soc_pmic_crc
- Use appropriate APIs; intel_soc_pmic_crc
- strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core
- GPIOD conversion; htc-i2cpld, stmpe
- Add missing header file includes; twl4030-irq
- DT goodies; stmpe, mediatek,mt6370, x-powers,axp152,
aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon,
qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063
Bug Fixes:
- Properly check return values; sm501, htc-i2cpld
- Repair Two-Wire Bus Mode; da9062-core
- Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788,
lp8788-irq"
* tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: syscon: Remove repetition of the regmap_get_val_endian()
mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE
power: supply: Add charger driver for Rockchip RK817
dt-bindings: mfd: mt6370: Fix the indentation in the example
mfd: da9061: Fix Failed to set Two-Wire Bus Mode.
mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()
dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018
mfd: sm501: Add check for platform_driver_register()
dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186
mfd: twl4030: Add missed linux/device.h header
dt-bindings: mfd: dlg,da9063: Add missing regulator patterns
dt-bindings: mfd: sprd: Add bindings for ums512 global registers
mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc
dt-bindings: mfd: syscon: Add rk3588 QoS register compatible
mfd: stmpe: Switch to using gpiod API
mfd: qcom-spmi-pmic: Add pm7250b compatible
dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver
mfd: intel-m10-bmc: Add d5005 bmc secure update driver
dt-bindings: mfd: syscon: Drop ref from reg-io-width
...
|
|
cpp_check reports
[drivers/power/supply/ab8500_chargalg.c:493]: (style) Variable 'ab8500_chargalg_ex_ac_enable_toggle' is assigned a value that is never used.
From inspection, this variable is never used. So remove it.
Fixes: 6c50a08d9dd3 ("power: supply: ab8500: Drop external charger leftovers")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chen Lifu <chenlifu@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
If create_singlethread_workqueue() fails, it returns a null pointer,
replace IS_ERR() check with NULL pointer check.
Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: ChiaEn Wu <chiaen_wu@richtek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
After commit 75ee3f6f0c1a("power: supply: ab8500_chargalg: Drop enable/disable
sysfs"), no one use struct ab8500_chargalg_sysfs_entry, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The mt6370-charger driver uses IIO interfaces and produces build
errors when CONFIG_IIO is not set, so it should depend on IIO.
ERROR: modpost: "iio_read_channel_processed" [drivers/power/supply/mt6370-charger.ko] undefined!
ERROR: modpost: "devm_iio_channel_get_all" [drivers/power/supply/mt6370-charger.ko] undefined!
Fixes: 233cb8a47d65 ("power: supply: mt6370: Add MediaTek MT6370 charger driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: ChiaEn Wu <chiaen_wu@richtek.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
There is a spelling mistake in the module description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add support for the Rockchip rk817 battery charger integrated into the
rk817 PMIC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220827021623.23829-4-macroalpha82@gmail.com
|
|
MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.
Add support for the MediaTek MT6370 Charger driver. The charger module
of MT6370 supports High-Accuracy Voltage/Current Regulation,
Average Input Current Regulation, Battery Temperature Sensing,
Over-Temperature Protection, DPDM Detection for BC1.2.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
bq25890_power_supply_set_property()
Clang warns:
drivers/power/supply/bq25890_charger.c:625:40: error: implicit conversion from enumeration type 'enum bq25890_fields' to different enumeration type 'enum bq25890_table_ids' [-Werror,-Wenum-conversion]
lval = bq25890_find_idx(val->intval, F_IINLIM);
~~~~~~~~~~~~~~~~ ^~~~~~~~
1 error generated.
Use the proper value from the right enumerated type, TBL_IINLIM, so
there is no more implcit conversion. The numerical values of F_IINLIM
and TBL_IINLIM happen to be the same so there is no change in behavior.
Fixes: 4a4748f28b0b ("power: supply: bq25890: Add support for setting IINLIM")
Link: https://github.com/ClangBuiltLinux/linux/issues/1707
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|