| Age | Commit message (Collapse) | Author |
|---|
|
Several drivers manually register a devm handler to disable their clk.
Convert them to devm_clk_get_enabled().
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix build error on 32-bit machines.
Fixes: 94c025b6f735 ("hwmon: (mr75203) modify the temperature equation according to series 5 datasheet")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220921121723.6726-1-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix: "ERROR: space required before the open parenthesis '('"
All of the errors were introduced before this series of patches.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-22-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This change adds debugfs to read and write temperature sensor coefficients
- g, h, j and cal5.
The coefficients can vary between product and product, so it can be very
useful to be able to modify them on the fly during the calibration
process.
e.g.:
cat /sys/kernel/debug/940f23d0000.pvt/ts_coeff_cal5
4096
echo 83000 > sys/kernel/debug/940f23d0000.pvt/ts_coeff_g
Signed-off-by: Eliav Farber <farbere@amazon.com>
Link: https://lore.kernel.org/r/20220908152449.35457-21-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use thermal coefficients from the device tree if they exist.
Otherwise, use default values according to the series (5 or 6).
All coefficients can be used or only part of them.
The coefficients shall be used for fine tuning the default values since
coefficients can vary between product and product.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-20-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The current equation used in code is aligned to series 5:
T = G + H * (n / cal5 - 0.5) + J * F
Where:
G = 60, H = 200, cal5 = 4094, J = -0.1, F = frequency clock in MHz
Series 6 has a slightly different equation:
T = G + H * (n / cal5 - 0.5)
and a different set of coefficients:
G = 57.4, H = 249.4, cal5 = 4096
This change supports equation and coefficients for both series.
(for series 6, J is set to 0).
The series is determined according to “moortec,ts-series” property in
the device tree.
If absent, series 5 is assumed to be the default.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-18-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Modify the equation and coefficients used to convert the digital output
to temperature according to series 5 of the Moortec Embedded Temperature
Sensor (METS) datasheet:
T = G + H * (n / cal5 - 0.5) + J * F
Where:
*) G = 60, H = 200, cal5 = 4094, J = -0.1.
*) F = frequency clock in MHz.
*) n is the digital output.
In code, the G, H and J coefficients are multiplied by a factor of 1000
to get the temperature in milli-Celsius.
Final result is clamped in case it exceeds min/max thresholds.
Change is done since it is unclear where the current equation and
coefficients came from.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-16-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mr76006 pre-scaler which provides divide-by-2 scaling
of the input voltage, so that it can be presented to the VM for
measurement within its range (the VM input range is limited from -0.1V
to 1V).
The driver reads from the device-tree all the channels that use the
mr76006 pre-scaler and multiplies the voltage result by a factor of 2,
to represent to the user with the actual voltage input source.
Channels that are not in the device-tree are multiplied by a factor
of 1.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-15-farbere@amazon.com
[groeck: Addressed conflicts against commit d59eacaac953]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add active channel support per voltage monitor.
The number of active channels is read from the device-tree.
When absent in device-tree, all channels are assumed to be used.
This shall be useful to expose sysfs only for inputs that are connected
to a voltage source.
Setting number of active channels to 0, means that entire VM sensor is
not used.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-13-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Don't fail the probe function and don't deassert the reset controller if
a "reset" property doesn't exist in the device tree.
Change is done for SOCs that don't support a reset controller.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-10-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
sensors
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.
This change is needed for all places that use pvt->v_num or vm_num
later on in the code.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood
of errors, and makes the code easier to read.
The conversion was done automatically with coccinelle. The semantic patch
used to make this change is as follows.
@s@
identifier i,j,ty;
@@
-struct hwmon_channel_info j = {
- .type = ty,
- .config = i,
-};
@r@
initializer list elements;
identifier s.i;
@@
-u32 i[] = {
- elements,
- 0
-};
@script:ocaml t@
ty << s.ty;
elements << r.elements;
shorter;
elems;
@@
shorter :=
make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty)));
elems :=
make_ident
(String.concat ","
(List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x)
(Str.split (Str.regexp " , ") elements)))
@@
identifier s.j,t.shorter;
identifier t.elems;
@@
- &j
+ HWMON_CHANNEL_INFO(shorter,elems)
This patch does not introduce functional changes. Many thanks to
Julia Lawall for providing the coccinelle script.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
the correct value should be 0x100. The register ip_tmr is expressed
in units of IP clk cycles, in accordance with the datasheet.
Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Arseny Demidov <a.demidov@yadro.com>
Link: https://lore.kernel.org/r/20211219102239.1112-1-a.demidov@yadro.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.
The new macro is an unsigned long. The code dealing with it is
considering as an unsigned long also.
Link: https://lkml.kernel.org/r/20210816114732.1834145-7-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PVT controller (MR75203) is used to configure & control
Moortec embedded analog IP which contains temprature
sensor(TS), voltage monitor(VM) & process detector(PD)
modules. Add hardware monitoring driver to support
MR75203 PVT controller.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/05b59cd860d2a1aa0a68ab300829efe709645184.1601889876.git.rahul.tanwar@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|