Age | Commit message (Collapse) | Author |
|
[ Upstream commit 8d0f019e4c4f2ee2de81efd9bf1c27e9fb3c0460 ]
Add the missing Set/Way CMOs that apply to tagged memory.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230515204601.1270428-2-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf9ae4a0077496e8224d68fc88e3df13dd7e5f37 ]
In pre-production prototypes (of which I only know one person
having one, Peter Geis), GPIO0 pin A5 was tied to the SDMMC
power enable pin on the CM4 connector. On all production models,
this is not the case; instead, this pin is used for the nEXTRST
signal, and the SDMMC power enable pin is always pulled high.
Since everyone currently using the SOQuartz device trees will
want this change, it is made to the tree without splitting the
trees into two separate ones of which users will then inevitably
choose the wrong one.
This fixes USB and PCIe on a wide variety of CM4IO-compatible
boards which use the nEXTRST signal.
Fixes: 5859b5a9c3ac ("arm64: dts: rockchip: add SoQuartz CM4IO dts")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20230421152610.21688-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e48824e8a03e5bc3666e9f5461f68d440d9acba0 ]
This enables the Mali-G52 GPU on the SOQuartz CM4 module.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221112160404.70868-2-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: cf9ae4a00774 ("arm64: dts: rockchip: fix nEXTRST on SOQuartz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad96f1c9138e0897bee7f7c5e54b3e24f8b62f57 ]
The sysctl net/core/bpf_jit_enable does not work now due to commit
1022a5498f6f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc"). The
commit saved the jitted insns into 'rw_image' instead of 'image'
which caused bpf_jit_dump not dumping proper content.
With 'echo 2 > /proc/sys/net/core/bpf_jit_enable', run
'./test_progs -t fentry_test'. Without this patch, one of jitted
image for one particular prog is:
flen=17 proglen=92 pass=4 image=0000000014c64883 from=test_progs pid=1807
00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
00000010: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
00000020: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
00000030: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
00000040: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
00000050: cc cc cc cc cc cc cc cc cc cc cc cc
With this patch, the jitte image for the same prog is:
flen=17 proglen=92 pass=4 image=00000000b90254b7 from=test_progs pid=1809
00000000: f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3
00000010: 0f 1e fa 31 f6 48 8b 57 00 48 83 fa 07 75 2b 48
00000020: 8b 57 10 83 fa 09 75 22 48 8b 57 08 48 81 e2 ff
00000030: 00 00 00 48 83 fa 08 75 11 48 8b 7f 18 be 01 00
00000040: 00 00 48 83 ff 0a 74 02 31 f6 48 bf 18 d0 14 00
00000050: 00 c9 ff ff 48 89 77 00 31 c0 c9 c3
Fixes: 1022a5498f6f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20230609005439.3173569-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8681f71759010503892f9e3ddb05f65c0f21b690 ]
Restore the host's PMUSERENR_EL0 value instead of clearing it,
before returning back to userspace, as the host's EL0 might have
a direct access to PMU registers (some bits of PMUSERENR_EL0 for
might not be zero for the host EL0).
Fixes: 83a7a4d643d3 ("arm64: perf: Enable PMU counter userspace access for perf event")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230603025035.3781797-2-reijiw@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d082d48737c75d2b3cc1f972b8c8674c25131534 upstream.
KPTI keeps around two PGDs: one for userspace and another for the
kernel. Among other things, set_pgd() contains infrastructure to
ensure that updates to the kernel PGD are reflected in the user PGD
as well.
One side-effect of this is that set_pgd() expects to be passed whole
pages. Unfortunately, init_trampoline_kaslr() passes in a single entry:
'trampoline_pgd_entry'.
When KPTI is on, set_pgd() will update 'trampoline_pgd_entry' (an
8-Byte globally stored [.bss] variable) and will then proceed to
replicate that value into the non-existent neighboring user page
(located +4k away), leading to the corruption of other global [.bss]
stored variables.
Fix it by directly assigning 'trampoline_pgd_entry' and avoiding
set_pgd().
[ dhansen: tweak subject and changelog ]
Fixes: 0925dda5962e ("x86/mm/KASLR: Use only one PUD entry for real mode trampoline")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20230614163859.924309-1-lee@kernel.org/g
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 568a67e742dfa90b19a23305317164c5c350b71e upstream.
The register and range mappings for the PCIe controller in Rockchip's
RK356x SoCs are incorrect. Replace them with corrected values from the
vendor BSP sources, updated to match current DT schema.
These values are also used in u-boot.
Fixes: 66b51ea7d70f ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20230601132516.153934-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 337ff6bb8960fdc128cabd264aaea3d42ca27a32 upstream.
A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is for linux-6.1.y and earlier, it has no direct mainline
equivalent.
In order to backport commit d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target") to resolve a separate
issue regarding PowerPC, the problem noticed and fixed by
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT") needs to be addressed. Unfortunately, 6.1 and
earlier do not contain commit e4412739472b ("Documentation: raise
minimum supported version of binutils to 2.25"), so it cannot be assumed
that all supported versions of GNU as have support for -msoft-float.
In order to switch from KBUILD_CFLAGS to KBUILD_AFLAGS in as-option
without consequence, move the '-Wa,-msoft-float' check to cc-option,
including '$(cflags-y)' directly to avoid the issue mentioned in
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 994f5f7816ff963f49269cfc97f63cb2e4edb84f upstream.
as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.
This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.
Link: https://lore.kernel.org/llvm/CAK7LNATcHt7GcXZ=jMszyH=+M_LC9Qr6yeAGRCBbE6xriLxtUQ@mail.gmail.com/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5b2a02bcaac7c287694aa0db4837a07bf178626 upstream.
We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:
arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined
Delete the duplicate definitions in <asm/assembly.h>.
Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 20188baceb7a1463dc0bcb0c8678b69c2f447df6 upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88ac3bbcf73853880a9b2a65c67e6854390741cc upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97b6b9cbba40a21c1d9a344d5c1991f8cfbf136e upstream.
If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections. This is not supported by kexec and crashes the
system.
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 930457057abe ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 962369120d750cbc9c4dc492f32b4304669ff6aa upstream.
LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85041e12418fd0c08ff972b7729f7971afb361f8 upstream.
The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
Fixes: 95acd4c7b69c ("nios2: Device tree support")
Fixes: 61c610ec61bb ("nios2: Add Max10 device tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4897a898a216058dec55e5e5902534e6e224fcdf ]
PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 ]
Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:
- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
a sync.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2041708dee30a3425f680265c337acd28293782 ]
The Au1300, at least the one I have to test, uses the NetLogic vendor
ID, but commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support") also
dropped Au1300 detection. Restore Au1300 detection.
Tested on DB1300 with Au1380 chip.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75b18aac6fa39a1720677970cfcb52ecea1eb44c ]
Alchemy DB1200/DB1300 boards can use the pata_platform driver.
Unhide the config entry in all of MIPS.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59fa12646d9f56c842b4d5b6418ed77af625c588 ]
Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().
When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 328acc5657c6197753238d7ce0a6924ead829347 ]
As all level 2 and level 3 caches are unified, add required
cache-unified property to fix warnings like:
vexpress-v2p-ca5s.dtb: cache-controller@2c0f0000: 'cache-unified' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230423150837.118466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a37f2699c36a7f6606ba3300f243227856c5ad6b ]
The call to startup_64_setup_env() will install a new GDT but does not
actually switch to using the KERNEL_CS entry until returning from the
function call.
Commit bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in
boot") moved the call to sme_enable() earlier in the boot process and in
between the call to startup_64_setup_env() and the switch to KERNEL_CS.
An SEV-ES or an SEV-SNP guest will trigger #VC exceptions during the call
to sme_enable() and if the CS pushed on the stack as part of the exception
and used by IRETQ is not mapped by the new GDT, then problems occur.
Today, the current CS when entering startup_64 is the kernel CS value
because it was set up by the decompressor code, so no issue is seen.
However, a recent patchset that looked to avoid using the legacy
decompressor during an EFI boot exposed this bug. At entry to startup_64,
the CS value is that of EFI and is not mapped in the new kernel GDT. So
when a #VC exception occurs, the CS value used by IRETQ is not valid and
the guest boot crashes.
Fix this issue by moving the block that switches to the KERNEL_CS value to
be done immediately after returning from startup_64_setup_env().
Fixes: bcce82908333 ("x86/sev: Detect/setup SEV/SME features earlier in boot")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/all/6ff1f28af2829cc9aea357ebee285825f90a431f.1684340801.git.thomas.lendacky%40amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99a670b2069c725a7b50318aa681d9cae8f89325 ]
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6569fc12e442ea973d96db39e542aa19a7bc3a79 ]
Commit 8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
allows riscv to use mmap with PROT_WRITE only, and meanwhile mmap with w+x
is also permitted. However, when userspace tries to access this page with
PROT_WRITE|PROT_EXEC, which causes infinite loop at load page fault as
well as it triggers soft lockup. According to riscv privileged spec,
"Writable pages must also be marked readable". The fix to drop the
`PAGE_COPY_READ_EXEC` and then `PAGE_COPY_EXEC` would be just used instead.
This aligns the other arches (i.e arm64) for protection_map.
Fixes: 8aeb7b17f04e ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
Signed-off-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230425102828.1616812-1-woodrow.shen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bf2e534313fcf420367668cc1f30e10469901dc ]
The final production baseboard had a different chip select than
earlier prototype boards. When the newer board was released,
the SPI stopped working because the wrong pin was used in the device
tree and conflicted with the UART RTS. Fix the pinmux for
production boards.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca50d7765587fe0a8351a6e8d9742cfd4811d925 ]
Add the assigned-clocks and assigned-clock-rates properties for the
LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Fixes: 35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b28fc688cdff225c41cdd22857500e187453ed7 ]
The USDHC2 CD and WP sginal should be on LSIO_GPIO5.
Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
boards
[ Upstream commit 3a735530c159b75e1402c08abe1ba4eb99a1f7a3 ]
In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.
The cpufreq table in sc7180.dtsi includes the superset of all CPU
frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can
dynamically detect which frequencies are actually available on the
currently running CPU and then we can just enable those ones.
The GPU is similarly dynamic. The nvmem has a fuse in it (see
"gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure
out which frequencies to enable.
There is one part, however, that is not so dynamic. The way SDRAM
frequency works in sc7180 is that it's tied to cpufreq. At the busiest
cpufreq operating points we'll pick the top supported SDRAM frequency.
They ramp down together.
For the "pro" SKU of sc7180, we only enable one extra cpufreq step.
That extra cpufreq step runs SDRAM at the same speed as the step
below. Thus, for normal and pro things are OK. There is no sc7180-pro
device tree snippet.
For the "lite" SKU if sc7180, however, things aren't so easy. The
"lite" SKU drops 3 cpufreq entries but can still run SDRAM at max
frequency. That messed things up with the whole scheme. This is why we
added the "sc7180-lite" fragment in commit 8fd01e01fd6f ("arm64: dts:
qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite").
When the lite scheme came about, it was agreed that the WiFi SKUs of
lazor would _always_ be "lite" and would, in fact, be the only "lite"
devices. Unfortunately, this decision changed and folks didn't realize
that it would be a problem. Specifically, some later lazor WiFi-only
devices were built with "pro" CPUs.
Building WiFi-only lazor with "pro" CPUs isn't the end of the world.
The SDRAM will ramp up a little sooner than it otherwise would, but
aside from a small power hit things work OK. One problem, though, is
that the SDRAM scaling becomes a bit quirky. Specifically, with the
current tables we'll max out SDRAM frequency at 2.1GHz but then
_lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz
and 2.55GHz.
Let's at least fix this so that the SDRAM frequency doesn't go down in
that quirky way. On true "lite" SKUs this change will be a no-op
because the operating points we're touching are disabled. This change
is only useful when a board that thinks it has a "lite" CPU actually
has a "normal" or "pro" one stuffed.
Fixes: 8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b0db163ff9200a55dc77a652dad1d4b0a853f63 ]
There is no atmel,shdwc-debouncer property for SHDWC. The right DT property
is debounce-delay-us. Use it.
Fixes: 16b161bcf5d4 ("ARM: dts: at91: sama7g5: add shdwc node")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230523052750.184223-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccd4923d18d5698a5910d516646ce125b9155d47 ]
The of_find_device_by_node() function is returning a struct platform_device
object with the embedded struct device member's reference counter
incremented. This needs to be dropped when done with the platform device
returned by of_find_device_by_node().
at91_pm_eth_quirk_is_valid() calls of_find_device_by_node() on
suspend and resume path. On suspend it calls of_find_device_by_node() and
on resume and failure paths it drops the counter of
struct platform_device::dev.
In case ethernet device may not wakeup there is a put_device() on
at91_pm_eth_quirk_is_valid() which is wrong as it colides with
put_device() on resume path leading to the reference counter of struct
device embedded in struct platform_device to be messed, stack trace to be
displayed (after 5 consecutive suspend/resume cycles) and execution to
hang.
Along with this the error path of at91_pm_config_quirks() had been also
adapted to decrement propertly the reference counter of struct device
embedded in struct platform_device.
Fixes: b7fc72c63399 ("ARM: at91: pm: add quirks for pm")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230518062511.2988500-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce7c014937c442be677963848c7db62eccd94eac ]
The rpmh driver will cache sleep and wake votes until the cluster
power-domain is about to enter idle, to avoid unnecessary writes. So
associate the apps_rsc with the cluster pd, so that it can be notified
about this event.
Without this, only AMC votes are being commited.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512150425.3171122-1-quic_bjorande@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8b703a49c9df5e74870381ad7ba9c85d8a74ed2c upstream.
Increment vcpu->stat.exits when handling a fastpath VM-Exit without
going through any part of the "slow" path. Not bumping the exits stat
can result in wildly misleading exit counts, e.g. if the primary reason
the guest is exiting is to program the TSC deadline timer.
Fixes: 404d5d7bff0d ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230602011920.787844-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 811154e234db72f0a11557a84ba9640f8b3bc823 upstream.
When handling ESR_ELx_EC_WATCHPT_LOW, far_el2 member of struct
kvm_vcpu_fault_info will be copied to far member of struct
kvm_debug_exit_arch and exposed to the userspace. The userspace will
see stale values from older faults if the fault info does not get
populated.
Fixes: 8fb2046180a0 ("KVM: arm64: Move early handlers to per-EC handlers")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230530024651.10014-1-akihiko.odaki@daynix.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 719dfd5925e186e09a2a6f23016936ac436f3d78 upstream.
kallsyms_lookup() which in turn calls kallsyms_lookup_buildid() writes
to index "KSYM_NAME_LEN - 1".
Thus the array passed as namebuf to kallsyms_lookup() should be
KSYM_NAME_LEN in size.
In xmon.c the array was defined to be "128" bytes directly, without
using KSYM_NAME_LEN. Commit b8a94bfb3395 ("kallsyms: increase maximum
kernel symbol length to 512") changed the value to 512, but missed
updating the xmon code.
Fixes: b8a94bfb3395 ("kallsyms: increase maximum kernel symbol length to 512")
Cc: stable@vger.kernel.org # v6.1+
Co-developed-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[mpe: Tweak change log wording and fix commit reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230529111337.352990-2-maninder1.s@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a7e8ec0d4cc64870ea449b4fce5779b77496cbb upstream.
For RISC-V, when tracing with tracepoint events, the IP and status are
set to 0, preventing the perf code parsing the callchain and resolving
the symbols correctly.
./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }'
@:
{ <STACKID4294967282> }: 1
The fix is to implement perf_arch_fetch_caller_regs for riscv, which
fills several necessary registers used for callchain unwinding,
including epc, sp, s0 and status. It's similar to commit b3eac0265bf6
("arm: perf: Fix callchain parse error with kernel tracepoint events")
and commit 5b09a094f2fb ("arm64: perf: Fix callchain parse error with
kernel tracepoint events").
With this patch, callchain can be parsed correctly as:
./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }'
@:
{
__traceiter_kmem_cache_alloc+68
__traceiter_kmem_cache_alloc+68
kmem_cache_alloc+354
__sigqueue_alloc+94
__send_signal_locked+646
send_signal_locked+154
do_send_sig_info+84
__kill_pgrp_info+130
kill_pgrp+60
isig+150
n_tty_receive_signal_char+36
n_tty_receive_buf_standard+2214
n_tty_receive_buf_common+280
n_tty_receive_buf2+26
tty_ldisc_receive_buf+34
tty_port_default_receive_buf+62
flush_to_ldisc+158
process_one_work+458
worker_thread+138
kthread+178
riscv_cpufeature_patch_func+832
}: 1
Signed-off-by: Ism Hong <ism.hong@gmail.com>
Link: https://lore.kernel.org/r/20230601095355.1168910-1-ism.hong@gmail.com
Fixes: 178e9fc47aae ("perf: riscv: preliminary RISC-V support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d2ccf00bddc268045e3d65a8108d61ada0e4b4e upstream.
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
disabled case")
commit f9f57da2c2d119dbf109e3f6e1ceab7659294046 upstream.
Commit
90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
broke the use case of running Xen dom0 kernels on machines with an
external disk enclosure attached via USB, see Link tag.
What this commit was originally fixing - SEV-SNP guests on Hyper-V - is
a more specialized situation which has other issues at the moment anyway
so reverting this now and addressing the issue properly later is the
prudent thing to do.
So revert it in time for the 6.2 proper release.
[ bp: Rewrite commit message. ]
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de
Cc: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c38b8400aef99d63be2b1ff131bb993465dcafe1 ]
It is now config_lock that must be held, not kvm lock. Replace the
comment with a lockdep annotation.
Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-4-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cf2f840c439b6b23bd99f584f2917ca425ae406 ]
vgic_its_create() changes the vgic state without holding the
config_lock, which triggers a lockdep warning in vgic_v4_init():
[ 358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[ 358.707410] vgic_v4_init+0x15c/0x7a8
[ 358.708550] vgic_its_create+0x37c/0x4a4
[ 358.709640] kvm_vm_ioctl+0x1518/0x2d80
[ 358.710688] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 358.711960] invoke_syscall.constprop.0+0x70/0x1e0
[ 358.713245] do_el0_svc+0xe4/0x2d4
[ 358.714289] el0_svc+0x44/0x8c
[ 358.715329] el0t_64_sync_handler+0xf4/0x120
[ 358.716615] el0t_64_sync+0x190/0x194
Wrap the whole of vgic_its_create() with config_lock since, in addition
to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic
state.
Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-3-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59112e9c390be595224e427827475a6cd3726021 ]
Lockdep reports a circular lock dependency between the srcu and the
config_lock:
[ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[ 262.182010] __synchronize_srcu+0xb0/0x224
[ 262.183422] synchronize_srcu_expedited+0x24/0x34
[ 262.184554] kvm_io_bus_register_dev+0x324/0x50c
[ 262.185650] vgic_register_redist_iodev+0x254/0x398
[ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724
[ 262.188087] kvm_vgic_addr+0x364/0x600
[ 262.189189] vgic_set_common_attr+0x90/0x544
[ 262.190278] vgic_v3_set_attr+0x74/0x9c
[ 262.191432] kvm_device_ioctl+0x2a0/0x4e4
[ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.195006] do_el0_svc+0xe4/0x2d4
[ 262.195929] el0_svc+0x44/0x8c
[ 262.196917] el0t_64_sync_handler+0xf4/0x120
[ 262.198238] el0t_64_sync+0x190/0x194
[ 262.199224]
[ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[ 262.201094] __lock_acquire+0x2b70/0x626c
[ 262.202245] lock_acquire+0x454/0x778
[ 262.203132] __mutex_lock+0x190/0x8b4
[ 262.204023] mutex_lock_nested+0x24/0x30
[ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0
[ 262.206178] dispatch_mmio_write+0xd8/0x258
[ 262.207498] __kvm_io_bus_write+0x1e0/0x350
[ 262.208582] kvm_io_bus_write+0xe0/0x1cc
[ 262.209653] io_mem_abort+0x2ac/0x6d8
[ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88
[ 262.211937] handle_exit+0xc4/0x39c
[ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8
[ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8
[ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0
[ 262.217774] do_el0_svc+0xe4/0x2d4
[ 262.218758] el0_svc+0x44/0x8c
[ 262.219941] el0t_64_sync_handler+0xf4/0x120
[ 262.221110] el0t_64_sync+0x190/0x194
Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.
In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).
Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.
The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.
Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.
Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0abde80620f42d1ceb3de5e4c1a49cdd5628229 ]
Like the other calls in this function virt_to_page() expects
a pointer, not an integer.
However since many architectures implement virt_to_pfn() as
a macro, this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
Fix this up with an explicit cast.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2023-May/832583.html
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]
This patch fixes several sparse warnings for fault.c:
arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:493:24: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:493:24: sparse: got int
arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:501:32: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:501:32: sparse: got int
arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:503:32: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:503:32: sparse: got int
arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:511:24: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:511:24: sparse: got int
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer
arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230502151909.128810-1-minhuadotchen@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 011644249686f2675e142519cd59e81e04cfc231 ]
Add pin configurations for using CAN controller on stm32f7.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a33239be2d38ff5a44427db1707c08787508d34a ]
When SMT thread CPUs are added to CPU masks the nr_cpu_ids
limit is not checked and could be exceeded. This leads to
a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set
and the command line parameter nr_cpus is set to 1.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73a23d7710331a530e972903318528b75e5a5f58 ]
Since we no longer (want to) export any libc symbols the
_user portions of any drivers need to be built into image
rather than the module. I missed this for the watchdog.
Fix the watchdog accordingly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]
When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.
For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}
For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.
For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.
To fix this,add uleb128 decode to cover all the above case.
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33d418da6f476b15e4510e0a590062583f63cd36 ]
commit ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap
region") wrongly moved the #ifndef CONFIG_BUILTIN_DTB surrounding the pa
variable definition in create_fdt_early_page_table(), so move it back to
its right place to quiet the following warning:
../arch/riscv/mm/init.c: In function ‘create_fdt_early_page_table’:
../arch/riscv/mm/init.c:925:12: warning: unused variable ‘pa’ [-Wunused-variable]
925 | uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);
Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230519131311.391960-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f161cea5a20f3aeeb637a88ad1705fc2720b4d58 upstream.
While testing the ethernet interface on a Variscite symphony carrier
board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware
configuration), the ethernet PHY is not detected.
The ADIN1300 datasheet indicate that the "Management interface
active (t4)" state is reached at most 5ms after the reset signal is
deasserted.
The device tree in Variscite custom git repository uses the following
property:
phy-reset-post-delay = <20>;
Add a new MDIO property 'reset-deassert-us' of 20ms to have the same
delay inside the ethphy node. Adding this property fixes the problem
with the PHY detection.
Note that this SOM can also have an Atheros AR8033 PHY. In this case,
a 1ms deassert delay is sufficient. Add a comment to that effect.
Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream.
The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
tried to align the stack pointer in show_trace_log_lvl(), otherwise the
"stack < stack_info.end" check can't guarantee that the last read does
not go past the end of the stack.
However, we have the same problem with the initial value of the stack
pointer, it can also be unaligned. So without this patch this trivial
kernel module
#include <linux/module.h>
static int init(void)
{
asm volatile("sub $0x4,%rsp");
dump_stack();
asm volatile("add $0x4,%rsp");
return -EAGAIN;
}
module_init(init);
MODULE_LICENSE("GPL");
crashes the kernel.
Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
Signed-off-by: Vernon Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|