summary refs log tree commit diff
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2023-08-23powerpc/rtas_flash: allow user copy to flash block cache objectsNathan Lynch
commit 4f3175979e62de3b929bfa54a0db4b87d36257a7 upstream. With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> [mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11powerpc/ftrace: Create a dummy stackframe to fix stack unwindNaveen N Rao
commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream. With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to call into ftrace are emitted right at function entry. The instruction sequence used is minimal to reduce overhead. Crucially, a stackframe is not created for the function being traced. This breaks stack unwinding since the function being traced does not have a stackframe for itself. As such, it never shows up in the backtrace: /sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 4144 32 ftrace_call+0x4/0x44 1) 4112 432 get_page_from_freelist+0x26c/0x1ad0 2) 3680 496 __alloc_pages+0x290/0x1280 3) 3184 336 __folio_alloc+0x34/0x90 4) 2848 176 vma_alloc_folio+0xd8/0x540 5) 2672 272 __handle_mm_fault+0x700/0x1cc0 6) 2400 208 handle_mm_fault+0xf0/0x3f0 7) 2192 80 ___do_page_fault+0x3e4/0xbe0 8) 2112 160 do_page_fault+0x30/0xc0 9) 1952 256 data_access_common_virt+0x210/0x220 10) 1696 400 0xc00000000f16b100 11) 1296 384 load_elf_binary+0x804/0x1b80 12) 912 208 bprm_execve+0x2d8/0x7e0 13) 704 64 do_execveat_common+0x1d0/0x2f0 14) 640 160 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 Fix this by having ftrace create a dummy stackframe for the function being traced. With this, backtraces now capture the function being traced: /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 3888 32 _raw_spin_trylock+0x8/0x70 1) 3856 576 get_page_from_freelist+0x26c/0x1ad0 2) 3280 64 __alloc_pages+0x290/0x1280 3) 3216 336 __folio_alloc+0x34/0x90 4) 2880 176 vma_alloc_folio+0xd8/0x540 5) 2704 416 __handle_mm_fault+0x700/0x1cc0 6) 2288 96 handle_mm_fault+0xf0/0x3f0 7) 2192 48 ___do_page_fault+0x3e4/0xbe0 8) 2144 192 do_page_fault+0x30/0xc0 9) 1952 608 data_access_common_virt+0x210/0x220 10) 1344 16 0xc0000000334bbb50 11) 1328 416 load_elf_binary+0x804/0x1b80 12) 912 64 bprm_execve+0x2d8/0x7e0 13) 848 176 do_execveat_common+0x1d0/0x2f0 14) 672 192 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 This results in two additional stores in the ftrace entry code, but produces reliable backtraces. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23powerpc/security: Fix Speculation_Store_Bypass reporting on Power10Michael Ellerman
commit 5bcedc5931e7bd6928a2d8207078d4cb476b3b55 upstream. Nageswara reported that /proc/self/status was showing "vulnerable" for the Speculation_Store_Bypass feature on Power10, eg: $ grep Speculation_Store_Bypass: /proc/self/status Speculation_Store_Bypass: vulnerable But at the same time the sysfs files, and lscpu, were showing "Not affected". This turns out to simply be a bug in the reporting of the Speculation_Store_Bypass, aka. PR_SPEC_STORE_BYPASS, case. When SEC_FTR_STF_BARRIER was added, so that firmware could communicate the vulnerability was not present, the code in ssb_prctl_get() was not updated to check the new flag. So add the check for SEC_FTR_STF_BARRIER being disabled. Rather than adding the new check to the existing if block and expanding the comment to cover both cases, rewrite the three cases to be separate so they can be commented separately for clarity. Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230517074945.53188-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19powerpc: update ppc_save_regs to save current r1 in pt_regsAditya Gupta
[ Upstream commit b684c09f09e7a6af3794d4233ef785819e72db79 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f8854b1 ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19powerpc: simplify ppc_save_regsNicholas Piggin
[ Upstream commit 37195b820d32c23bdefce3f460ed7de48a57e5e4 ] Adjust the pt_regs pointer so the interrupt frame offsets can be used to save registers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221127124942.1665522-7-npiggin@gmail.com Stable-dep-of: b684c09f09e7 ("powerpc: update ppc_save_regs to save current r1 in pt_regs") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19powerpc/signal32: Force inlining of __unsafe_save_user_regs() and ↵Christophe Leroy
save_tm_user_regs_unsafe() [ Upstream commit a03b1a0b19398a47489fdcef02ec19c2ba05a15d ] Looking at generated code for handle_signal32() shows calls to a function called __unsafe_save_user_regs.constprop.0 while user access is open. And that __unsafe_save_user_regs.constprop.0 function has two nops at the begining, allowing it to be traced, which is unexpected during user access open window. The solution could be to mark __unsafe_save_user_regs() no trace, but to be on the safe side the most efficient is to flag it __always_inline as already done for function __unsafe_restore_general_regs(). The function is relatively small and only called twice, so the size increase will remain in the noise. Do the same with save_tm_user_regs_unsafe() as it may suffer the same issue. Fixes: ef75e7318294 ("powerpc/signal32: Transform save_user_regs() and save_tm_user_regs() in 'unsafe' version") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/7e469c8f01860a69c1ada3ca6a5e2aa65f0f74b2.1685955220.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()Christophe Leroy
[ Upstream commit 0eb089a72fda3f7969e6277804bde75dc1474a14 ] A disassembly of interrupt_exit_kernel_prepare() shows a useless read of MSR register. This is shown by r9 being re-used immediately without doing anything with the value read. c000e0e0: 60 00 00 00 nop c000e0e4: 7d 3a c2 a6 mfmd_ap r9 c000e0e8: 7d 20 00 a6 mfmsr r9 c000e0ec: 7c 51 13 a6 mtspr 81,r2 c000e0f0: 81 3f 00 84 lwz r9,132(r31) c000e0f4: 71 29 80 00 andi. r9,r9,32768 This is due to the use of local_irq_save(). The flags read by local_irq_save() are never used, use local_irq_disable() instead. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/df36c6205ab64326fb1b991993c82057e92ace2f.1685955214.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV deviceGaurav Batra
commit 1f7aacc5eb9ed2cc17be7a90da5cd559effb9d59 upstream. For an SR-IOV device, while enabling DDW, a new table is created and added at index 1 in the group. In the below 2 scenarios, the table is incorrectly referenced at index 0 (which is where the table is for default DMA window). 1. When adding DDW This issue is exposed with "slub_debug". Error thrown out from dma_iommu_dma_supported() Warning: IOMMU offset too big for device mask mask: 0xffffffff, table offset: 0x800000000000000 2. During Dynamic removal of the PCI device. Error is from iommu_tce_table_put() since a NULL table pointer is passed in. Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEsGaurav Batra
commit 096339ab84f36beae0b1db25e0ce63fb3873e8b2 upstream. When DMA window is backed by 2MB TCEs, the DMA address for the mapped page should be the offset of the page relative to the 2MB TCE. The code was incorrectly setting the DMA address to the beginning of the TCE range. Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV ethernet port, when DMA window is backed by 2MB TCEs. Fixes: 387273118714 ("powerps/pseries/dma: Add support for 2M IOMMU page size") Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11powerpc/rtas: use memmove for potentially overlapping buffer copyNathan Lynch
[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ] Using memcpy() isn't safe when buf is identical to rtas_err_buf, which can happen during boot before slab is up. Full context which may not be obvious from the diff: if (altbuf) { buf = altbuf; } else { buf = rtas_err_buf; if (slab_is_available()) buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); } if (buf) memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); This was found by inspection and I'm not aware of it causing problems in practice. It appears to have been introduced by commit 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the old ppc64 version of this code did not have this problem. Use memmove() instead. Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06powerpc: Don't try to copy PPR for task with NULL pt_regsJens Axboe
commit fd7276189450110ed835eb0a334e62d2f1c4e3be upstream. powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0 REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8 ... NIP memcpy_power7+0x200/0x7d0 LR ppr_get+0x64/0xb0 Call Trace: ppr_get+0x40/0xb0 (unreliable) __regset_get+0x180/0x1f0 regset_get_alloc+0x64/0x90 elf_core_dump+0xb98/0x1b60 do_coredump+0x1c34/0x24a0 get_signal+0x71c/0x1410 do_notify_resume+0x140/0x6f0 interrupt_exit_user_prepare_main+0x29c/0x320 interrupt_exit_user_prepare+0x6c/0xa0 interrupt_return_srr_user+0x8/0x138 Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL pt_regs. Check for a valid pt_regs in both ppc_get/ppr_set, and return an error if not set. The actual error value doesn't seem to be important here, so just pick -EINVAL. Fixes: fa439810cc1b ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Jens Axboe <axboe@kernel.dk> [mpe: Trim oops in change log, add Fixes & Cc stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17powerpc/kcsan: Exclude udelay to prevent recursive instrumentationRohan McLure
[ Upstream commit 2a7ce82dc46c591c9244057d89a6591c9639b9b9 ] In order for KCSAN to increase its likelihood of observing a data race, it sets a watchpoint on memory accesses and stalls, allowing for detection of conflicting accesses by other kernel threads or interrupts. Stalls are implemented by injecting a call to udelay in instrumented code. To prevent recursive instrumentation, exclude udelay from being instrumented. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17powerpc/64: Move paca allocation to early_setup()Nicholas Piggin
[ Upstream commit dc222fa7737212fe0da513e5b8937c156d02225d ] The early paca and boot cpuid dance is complicated and currently does not quite work as expected for boot cpuid != 0 cases. early_init_devtree() currently allocates the paca_ptrs and boot cpuid paca, but until that returns and early_setup() calls setup_paca(), this thread is currently still executing with smp_processor_id() == 0. One problem this causes is the paca_ptrs[smp_processor_id()] pointer is poisoned, so valid_emergency_stack() (any backtrace) and any similar users will crash. Another is that the hardware id which is set here will not be returned by get_hard_smp_processor_id(smp_processor_id()), but it would work correctly for boot_cpuid == 0, which could lead to difficult to reproduce or find bugs. The hard id does not seem to be used by the rest of early_init_devtree(), it just looks like all this code might have been put here to allocate somewhere to store boot CPU hardware id while scanning the devtree. Rearrange things so the hwid is put in a global variable like boot_cpuid, and do all the paca allocation and boot paca setup in the 64-bit early_setup() after we have everything ready to go. The paca_ptrs[0] re-poisoning code in early_setup does not seem to have ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid is not 0. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix build error on 32-bit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17powerpc/64: Fix task_cpu in early boot when booting non-zero cpuidNicholas Piggin
[ Upstream commit 9fa24404f5044967753a6cd3e5e36f57686bec6e ] powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot CPU is said to be "assumed to be 0" until early_init_devtree() discovers the id from the device tree. That is not a good description because the assumption can be wrong and that has to be handled, the better description is that 0 is used as a placeholder, and things are fixed after the real id is discovered. smp_processor_id() is set to the boot cpuid, but task_cpu(current) is not, which causes the smp_processor_id() == task_cpu(current) invariant to be broken until init_idle() in sched_init(). This is quite fragile and could lead to subtle bugs in future. One bug is that validate_sp_size uses task_cpu() to get the process stack, so any stack trace from the booting CPU between early_init_devtree() and sched_init() will have problems. Early on paca_ptrs[0] will be poisoned, so that can cause machine checks dereferencing that memory in real mode. Later, validating the current stack pointer against the idle task of a different secondary will probably cause no stack trace to be printed. Fix this by setting thread_info->cpu right after smp_processor_id() is set to the boot cpuid. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix SMP=n build as reported by sfr] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17powerpc/iommu: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
[ Upstream commit b505063910c134778202dfad9332dfcecb76bab3 ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17powerpc/64: Don't recurse irq replayNicholas Piggin
[ Upstream commit 5746ca131e2496ccd5bb4d7a0244d6c38070cbf5 ] Interrupt handlers called by soft-pending irq replay code can run softirqs, softirq replay enables and disables local irqs, which allows interrupts to come in including soft-masked interrupts, and it can cause pending irqs to be replayed again. That makes the soft irq replay state machine and possible races more complicated and fragile than it needs to be. Use irq_enter/irq_exit around irq replay to prevent softirqs running while interrupts are being replayed. Softirqs will now be run at the irq_exit() call after all the irq replaying is done. This prevents irqs being replayed while irqs are being replayed, and should hopefully make things simpler and easier to think about and debug. A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt handlers hard-enabling EE while pending irqs are being replayed, because that causes new pending irqs to arrive which is also a complexity. This means pending irqs won't be profiled quite so well because perf irqs can't be taken. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230121102618.2824429-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25powerpc/vmlinux.lds: Don't discard .rela* for relocatable buildsMichael Ellerman
commit 07b050f9290ee012a407a0f64151db902a1520f5 upstream. Relocatable kernels must not discard relocations, they need to be processed at runtime. As such they are included for CONFIG_RELOCATABLE builds in the powerpc linker script (line 340). However they are also unconditionally discarded later in the script (line 414). Previously that worked because the earlier inclusion superseded the discard. However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv") introduced an earlier use of DISCARD as part of the RO_DATA macro (line 137). With binutils < 2.36 that causes the DISCARD directives later in the script to be applied earlier, causing .rela* to actually be discarded at link time, leading to build warnings and a kernel that doesn't boot: ld: warning: discarding dynamic section .rela.init.rodata Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE is disabled. Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
2023-02-25powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXITMichael Ellerman
commit 4b9880dbf3bdba3a7c56445137c3d0e30aaa0a40 upstream. The powerpc linker script explicitly includes .exit.text, because otherwise the link fails due to references from __bug_table and __ex_table. The code is freed (discarded) at runtime along with .init.text and data. That has worked in the past despite powerpc not defining RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker script (line 410), and the explicit inclusion of .exit.text earlier (line 280) supersedes the discard. However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv") introduced an earlier use of DISCARD as part of the RO_DATA macro (line 136). With binutils < 2.36 that causes the DISCARD directives later in the script to be applied earlier [1], causing .exit.text to actually be discarded at link time, leading to build errors: '.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in discarded section '.exit.text' of crypto/algboss.o '.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in discarded section '.exit.text' of drivers/nvdimm/core.o Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic DISCARDS macro to not include .exit.text at all. 1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/ Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-22powerpc/64: Fix perf profiling asynchronous interrupt handlersNicholas Piggin
[ Upstream commit c28548012ee2bac55772ef7685138bd1124b80c3 ] Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the hard irq disabled state. So when should_hard_irq_enable() returns true because we want PMI interrupts in irq handlers, MSR[EE] is enabled but PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before enabling MSR[EE]. This also tidies some of the warnings, no need to duplicate them in both should_hard_irq_enable() and do_hard_irq_enable(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-14powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switchNicholas Piggin
commit 2ea31e2e62bbc4d11c411eeb36f1b02841dbcab1 upstream. The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-04powerpc/rtas: avoid scheduling in rtas_os_term()Nathan Lynch
[ Upstream commit 6c606e57eecc37d6b36d732b1ff7e55b7dc32dd4 ] It's unsafe to use rtas_busy_delay() to handle a busy status from the ibm,os-term RTAS function in rtas_os_term(): Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:618 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 CPU: 7 PID: 1 Comm: swapper/0 Tainted: G D 6.0.0-rc5-02182-gf8553a572277-dirty #9 Call Trace: [c000000007b8f000] [c000000001337110] dump_stack_lvl+0xb4/0x110 (unreliable) [c000000007b8f040] [c0000000002440e4] __might_resched+0x394/0x3c0 [c000000007b8f0e0] [c00000000004f680] rtas_busy_delay+0x120/0x1b0 [c000000007b8f100] [c000000000052d04] rtas_os_term+0xb8/0xf4 [c000000007b8f180] [c0000000001150fc] pseries_panic+0x50/0x68 [c000000007b8f1f0] [c000000000036354] ppc_panic_platform_handler+0x34/0x50 [c000000007b8f210] [c0000000002303c4] notifier_call_chain+0xd4/0x1c0 [c000000007b8f2b0] [c0000000002306cc] atomic_notifier_call_chain+0xac/0x1c0 [c000000007b8f2f0] [c0000000001d62b8] panic+0x228/0x4d0 [c000000007b8f390] [c0000000001e573c] do_exit+0x140c/0x1420 [c000000007b8f480] [c0000000001e586c] make_task_dead+0xdc/0x200 Use rtas_busy_delay_time() instead, which signals without side effects whether to attempt the ibm,os-term RTAS call again. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221118150751.469393-5-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-04powerpc/rtas: avoid device tree lookups in rtas_os_term()Nathan Lynch
[ Upstream commit ed2213bfb192ab51f09f12e9b49b5d482c6493f3 ] rtas_os_term() is called during panic. Its behavior depends on a couple of conditions in the /rtas node of the device tree, the traversal of which entails locking and local IRQ state changes. If the kernel panics while devtree_lock is held, rtas_os_term() as currently written could hang. Instead of discovering the relevant characteristics at panic time, cache them in file-static variables at boot. Note the lookup for "ibm,extended-os-term" is converted to of_property_read_bool() since it is a boolean property, not an RTAS function token. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> [mpe: Incorporate suggested change from Nick] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16powerpc: Fix writable sections being moved into the rodata regionNicholas Piggin
.data.rel.ro* catches .data.rel.root_cpuacct, and the kernel crashes on a store in css_clear_dir. At least we know read-only data protection is working... Fixes: b6adc6d6d3272 ("powerpc/build: move .data.rel.ro, .sdata2 to read-only") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221116043954.3307852-1-npiggin@gmail.com
2022-11-01powerpc/32: fix syscall wrappers with 64-bit argumentsAndreas Schwab
With the introduction of syscall wrappers all wrappers for syscalls with 64-bit arguments must be handled specially, not only those that have unaligned 64-bit arguments. This left out the fallocate() and sync_file_range2() syscalls. Fixes: 7e92e01b7245 ("powerpc: Provide syscall wrapper") Fixes: e23750623835 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/87mt9cxd6g.fsf_-_@igel.home
2022-10-27powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to ↵Nicholas Piggin
soft-masked context Commit a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context") fixed the problem of pending irqs being cleared when clearing the HARD_DIS bit, but then it didn't clear the bit at all. This change clears HARD_DIS without affecting other bits in the mask. When an interrupt hits in a soft-masked section that has MSR[EE]=1, it can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK interrupt becoming pending). Failure to clear this leaves the returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which confuses irq assertions and could be dangerous for code that might test the flag. This was observed in a hash MMU kernel where a kernel hash fault hits in a local_irqs_disabled region that has EE=1. The hash fault also runs with EE=1, then as it returns, a decrementer hits in the restart section and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS flag, which is not clear when the original context is returned to. Reported-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221022052207.471328-1-npiggin@gmail.com
2022-10-18powerpc/64s/interrupt: Perf NMI should not take normal exit pathNicholas Piggin
NMI interrupts should exit with EXCEPTION_RESTORE_REGS not with interrupt_return_srr, which is what the perf NMI handler currently does. This breaks if a PMI hits after interrupt_exit_user_prepare_main() has switched the context tracking to user mode, then the CT_WARN_ON() in interrupt_exit_kernel_prepare() fires because it returns to kernel with context set to user. This could possibly be solved by soft-disabling PMIs in the exit path, but that reduces our ability to profile that code. The warning could be removed, but it's potentially useful. All other NMIs and soft-NMIs return using EXCEPTION_RESTORE_REGS, so this makes perf interrupts consistent with that and seems like the best fix. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Squash in fixups from Nick] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221006140413.126443-3-npiggin@gmail.com
2022-10-18powerpc/64/interrupt: Prevent NMI PMI causing a dangerous warningNicholas Piggin
NMI PMIs really should not return using the normal interrupt_return function. If such a PMI hits in code returning to user with the context switched to user mode, this warning can fire. This was enough to cause crashes when reproducing on 64s, because another perf interrupt would hit while reporting bug, and that would cause another bug, and so on until smashing the stack. Work around that particular crash for now by just disabling that context warning for PMIs. This is a hack and not a complete fix, there could be other such problems lurking in corners. But it does fix the known crash. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221014030729.2077151-3-npiggin@gmail.com
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-14Merge tag 'powerpc-6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix 32-bit syscall wrappers with 64-bit arguments of unaligned register-pairs. Notably this broke ftruncate64 & pread/write64, which can lead to file corruption. - Fix lost interrupts when returning to soft-masked context on 64-bit. - Fix build failure when CONFIG_DTL=n. Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd Bergmann, and Sachin Sant. * tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix CONFIG_DTL=n build powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs
2022-10-13powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked contextNicholas Piggin
It's possible for an interrupt returning to an irqs-disabled context to lose a pending soft-masked irq because it branches to part of the exit code for irqs-enabled contexts, which is meant to clear only the PACA_IRQS_HARD_DIS flag from PACAIRQHAPPENED by zeroing the byte. This just looks like a simple thinko from a recent commit (if there was no hard mask pending, there would be no reason to clear it anyway). This also adds comment to the code that actually does need to clear the flag. Fixes: e485f6c751e0a ("powerpc/64/interrupt: Fix return to masked context after hard-mask irq becomes pending") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221013064418.1311104-1-npiggin@gmail.com
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-13powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned ↵Nicholas Piggin
register-pairs powerpc 32-bit system call (and function) calling convention for 64-bit arguments requires the next available odd-pair (two sequential registers with the first being odd-numbered) from the standard register argument allocation. The first argument register is r3, so a 64-bit argument that appears at an even position in the argument list must skip a register (unless there were preceding 64-bit arguments, which might throw things off). This requires non-standard compat definitions to deal with the holes in the argument register allocation. With pt_regs syscall wrappers which use a standard mapper to map pt_regs GPRs to function arguments, 32-bit kernels hit the same basic problem, the standard definitions don't cope with the unused argument registers. Fix this by having 32-bit kernels share those syscall definitions with compat. Thanks to Jason for spending a lot of time finding and bisecting this and developing a trivial reproducer. The perfect bug report. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Fixes: 7e92e01b72452 ("powerpc: Provide syscall wrapper") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221012035335.866440-1-npiggin@gmail.com
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11powerpc: Fix 85xx buildJoel Stanley
The merge of the kbuild tree dropped the renaming of the FSL_BOOKE kconfig option. Fixes: 8afc66e8d43b ("Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld) - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me) This series cleans that mess and adds new config FORCE_NR_CPUS that allows to optimize cpumask subsystem if the number of CPUs is known at compile-time. - optimize find_bit() functions (me) Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros. - add find_nth_bit() (me) Adds find_nth_bit(), which is ~70 times faster than bitcounting with for_each() loop: for_each_set_bit(bit, mask, size) if (n-- == 0) return bit; Also adds bitmap_weight_and() to let people replace this pattern: tmp = bitmap_alloc(nbits); bitmap_and(tmp, map1, map2, nbits); weight = bitmap_weight(tmp, nbits); bitmap_free(tmp); with a single bitmap_weight_and() call. - repair cpumask_check() (me) After switching cpumask to use nr_cpu_ids, cpumask_check() started generating many false-positive warnings. This series fixes it. - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin Schneider) Extends the API with one more function and applies it in sched/core. * tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits) sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot() lib/test_cpumask: Add for_each_cpu_and(not) tests cpumask: Introduce for_each_cpu_andnot() lib/find_bit: Introduce find_next_andnot_bit() cpumask: fix checking valid cpu range lib/bitmap: add tests for for_each() loops lib/find: optimize for_each() macros lib/bitmap: introduce for_each_set_bit_wrap() macro lib/find_bit: add find_next{,_and}_bit_wrap cpumask: switch for_each_cpu{,_not} to use for_each_bit() net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and} cpumask: add cpumask_nth_{,and,andnot} lib/bitmap: remove bitmap_ord_to_pos lib/bitmap: add tests for find_nth_bit() lib: add find_nth{,_and,_andnot}_bit() lib/bitmap: add bitmap_weight_and() lib/bitmap: don't call __bitmap_weight() in kernel code tools: sync find_bit() implementation lib/find_bit: optimize find_next_bit() functions lib/find_bit: create find_first_zero_bit_le() ...
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-10Merge tag 'perf-core-2022-10-07' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: "PMU driver updates: - Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature support for Zen 4 processors. - Extend the perf ABI to provide branch speculation information, if available, and use this on CPUs that have it (eg. LbrExtV2). - Improve Intel PEBS TSC timestamp handling & integration. - Add Intel Raptor Lake S CPU support. - Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs by utilizing IBS tagged load/store samples. - Clean up & optimize various x86 PMU details. HW breakpoints: - Big rework to optimize the code for systems with hundreds of CPUs and thousands of breakpoints: - Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem per-CPU rwsem that is read-locked during most of the key operations. - Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and fetch_bp_busy_slots(). - Apply micro-optimizations & cleanups. - Misc cleanups & enhancements" * tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex perf: Fix pmu_filter_match() perf: Fix lockdep_assert_event_ctx() perf/x86/amd/lbr: Adjust LBR regardless of filtering perf/x86/utils: Fix uninitialized var in get_branch_type() perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR perf/x86/amd: Support PERF_SAMPLE_ADDR perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT} perf/x86/amd: Support PERF_SAMPLE_DATA_SRC perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO} perf/x86/uncore: Add new Raptor Lake S support perf/x86/cstate: Add new Raptor Lake S support perf/x86/msr: Add new Raptor Lake S support perf/x86: Add new Raptor Lake S support bpf: Check flags for branch stack in bpf_read_branch_records helper perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails perf: Use sample_flags for raw_data perf: Use sample_flags for addr ...
2022-10-09Merge tag 'powerpc-6.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng Yongjun. * tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) KVM: PPC: Book3S HV: Fix stack frame regs marker powerpc: Don't add __powerpc_ prefix to syscall entry points powerpc/64s/interrupt: Fix stack frame regs marker powerpc/64: Fix msr_check_and_set/clear MSR[EE] race powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN powerpc/pseries: Add firmware details to the hardware description powerpc/powernv: Add opal details to the hardware description powerpc: Add device-tree model to the hardware description powerpc/64: Add logical PVR to the hardware description powerpc: Add PVR & CPU name to hardware description powerpc: Add hardware description string powerpc/configs: Enable PPC_UV in powernv_defconfig powerpc/configs: Update config files for removed/renamed symbols powerpc/mm: Fix UBSAN warning reported on hugetlb powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range powerpc: Drops STABS_DEBUG from linker scripts powerpc/64s: Remove lost/old comment powerpc/64s: Remove old STAB comment powerpc: remove orphan systbl_chk.sh ...
2022-10-07powerpc: Don't add __powerpc_ prefix to syscall entry pointsMichael Ellerman
When using syscall wrappers the __SYSCALL_DEFINEx() and related macros add a "__powerpc_" prefix to all syscall entry points. So for example sys_mmap becomes __powerpc_sys_mmap. This risks breaking workflows and tools that expect the old naming scheme. At a minimum setting a breakpoint on eg. sys_mmap with gdb no longer works. There seems to be no compelling reason to add the "__powerpc_" prefix, other than that it follows what some other arches do (x86, arm64, s390). But unlike other arches powerpc doesn't always enable syscall wrappers, so the syscall entry points can change name depending on CONFIG options. For those reasons drop the "__powerpc_" prefix, reverting to the existing naming. Doing so reveals two prototypes in signal.h that have the incorrect type when syscall wrappers are enabled. There are already prototypes for both functions in syscalls.h, so drop the ones from signal.h. Fixes: 7e92e01b7245 ("powerpc: Provide syscall wrapper") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221006135940.1223988-1-mpe@ellerman.id.au
2022-10-05powerpc/64s/interrupt: Fix stack frame regs markerNicholas Piggin
The value of the stack frame regs marker that gets saved on the stack in interrupt entry code does not match the regs marker value, which breaks stack frame marker matching. This stray instruction looks to have been introduced in a mismerge. Fixes: bf75a3258a403 ("powerpc/64s/interrupt: move early boot ILE fixup into a macro") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Mismerge by yours truly -_-] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004132952.984341-1-npiggin@gmail.com
2022-10-04powerpc/64: Fix msr_check_and_set/clear MSR[EE] raceNicholas Piggin
irq soft-masking means that when Linux irqs are disabled, the MSR[EE] value can change from 1 to 0 asynchronously: if a masked interrupt of the PACA_IRQ_MUST_HARD_MASK variety fires while irqs are disabled, the masked handler will return with MSR[EE]=0. This means a sequence like mtmsr(mfmsr() | MSR_FP) is racy if it can be called with local irqs disabled, unless a hard_irq_disable has been done. Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004051157.308999-2-npiggin@gmail.com
2022-10-04powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARNNicholas Piggin
This new assertion added is generally harmless and gets fixed up naturally, but it does indicate a problem with MSR manipulation somewhere. Fixes: c39fb71a54f0 ("powerpc/64s/interrupt: masked handler debug check for previous hard disable") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004051157.308999-1-npiggin@gmail.com
2022-10-02kbuild: use obj-y instead extra-y for objects placed at the headMasahiro Yamada
The objects placed at the head of vmlinux need special treatments: - arch/$(SRCARCH)/Makefile adds them to head-y in order to place them before other archives in the linker command line. - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of obj-y to avoid them going into built-in.a. This commit gets rid of the latter. Create vmlinux.a to collect all the objects that are unconditionally linked to vmlinux. The objects listed in head-y are moved to the head of vmlinux.a by using 'ar m'. With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y for builtin objects. There is no *.o that is directly linked to vmlinux. Drop unneeded code in scripts/clang-tools/gen_compile_commands.py. $(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested by Nathan Chancellor [1]. [1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-30powerpc: Add device-tree model to the hardware descriptionMichael Ellerman
Add the model of the machine we're on to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: IBM,8247-22L Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-4-mpe@ellerman.id.au
2022-09-30powerpc/64: Add logical PVR to the hardware descriptionMichael Ellerman
If we detect a logical PVR add that to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: ... 0xf000004 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-3-mpe@ellerman.id.au
2022-09-30powerpc: Add PVR & CPU name to hardware descriptionMichael Ellerman
Add the PVR and CPU name to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: ... POWER8E (raw) 0x4b0201 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-2-mpe@ellerman.id.au
2022-09-30powerpc: Add hardware description stringMichael Ellerman
Create a hardware description string, which we will use to record various details of the hardware platform we are running on. Print the accumulated description at boot, and use it to set the generic description which is printed in oopses. To begin with add ppc_md.name, aka the "machine description". Example output at boot with the full series applied: Linux version 6.0.0-rc2-gcc-11.1.0-00199-g893f9007a5ce-dirty (michael@alpine1-p1) (powerpc64-linux-gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #844 SMP Thu Sep 29 22:29:53 AEST 2022 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-5b4c5a pSeries printk: bootconsole [udbg0] enabled Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-1-mpe@ellerman.id.au
2022-09-30powerpc: Drops STABS_DEBUG from linker scriptsMichael Ellerman
No toolchain we support should be generating stabs debug information anymore. Drop the sections entirely from our linker scripts. We removed all the manual stabs annotations in commit 12318163737c ("powerpc/32: Remove remaining .stabs annotations"). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220928130951.1732983-1-mpe@ellerman.id.au
2022-09-30powerpc/64s: Remove lost/old commentMichael Ellerman
The bulk of this was moved/reworded in: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") And now appears around line 700 in arch/powerpc/kernel/exceptions-64s.S. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220928130941.1732818-1-mpe@ellerman.id.au
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-12 22:13:54 +0000