Age | Commit message (Collapse) | Author |
|
As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/
DT schema files should not have 'Device Tree Binding' as part of there
title: line. Remove this in most .yaml files, so hopefully preventing
developers copying it into new .yaml files, and being asked to remove
it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.
SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).
When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
|
|
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory
which requires different configuration. The reason for adding this file to
Linux kernel is that U-Boot fdtfile variable is composed based on board
revision (in eeprom) and dtb file should exist in standard distibutions for
passing it to Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com
|
|
into arm/dt
ARM: dts: Zynq DT changes for v5.12-v2
- Add Ebang board support
- Add missing zturn boards in dt binding
- And convert Zynq QSPI binding
* tag 'zynq-dt-for-v5.12-v2' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
Link: https://lore.kernel.org/r/19e0e0c9-1bed-bba5-6c80-6903937b3d96@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add missing DT compatible strings for Zturn boards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f6f642d75c1b1160ed78f6de0a2944ab64017691.1612185370.git.michal.simek@xilinx.com
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add the Ebang EBAZ4205 board to the Zynq-7000 board category.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-3-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/13d064fc4850f96904a04e330cea5295d3751e46.1611226560.git.michal.simek@xilinx.com
|
|
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c
structure compare to revA. The rest of the board is the same from software
perspective.
Also enable DMAs and QSPI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
|
|
In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As the top-level
board/SoC schemas always have additional properties, add
'additionalProperties: true'.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add missing description for Ultra96, zcu104, zcu106 and zcu111.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert Xilinx SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|