summary refs log tree commit diff
AgeCommit message (Collapse)Author
2018-03-16perf vendor events: Drop incomplete multiple mapfile supportJohn Garry
Currently jevents supports multiple mapfiles, but this is only in the form where mapfile basename starts with 'mapfile.csv' At the moment, no architectures actually use multiple mapfiles, so drop the support for now. This patch also solves a nuisance where, when the mapfile is edited and the text editor may create a backup, jevents may use the backup, as shown: jevents: Many mapfiles? Using pmu-events/arch/arm64/mapfile.csv~, ignoring pmu-events/arch/arm64/mapfile.csv Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: http://lkml.kernel.org/r/1520506716-197429-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf tools arm64: Add libdw DWARF post unwind support for ARM64Kim Phillips
Based on prior work: https://lkml.org/lkml/2014/5/6/395 and on how other arches add libdw unwind support. Includes support for running the unwind test, e.g., on a system with only elfutils' libdw 0.170, the test now runs, and successfully: $ ./perf test unwind 56: Test dwarf unwind : Ok Originally-by: Jean Pihet <jean.pihet@linaro.org> Reported-by: Christian Hansen <chansen3@cisco.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180308211030.4ee4a0d6ff6dc5cda1b567d4@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c report: Add cacheline address count columnJiri Olsa
Adding the 'PA cnt' column grouped under data cacheline address. It shows how many times the physical addresses changed for the hist entry. It does not show the number of different physical addresses for entry, because we don't store those. We only track the number of times we got different address than we currently hold, which is not expensive and gives similar info. $ perf c2c report --stdio # ----------- Cacheline ---------- Total Tot ----- LLC Load Hitm ----- # Index Address Node PA cnt records Hitm Total Lcl Rmt # ..... .................. .... ...... ....... ....... ....... ....... ....... # 0 0xffff9ad56dca0a80 0 9 10 7.69% 2 2 0 1 0xffff9ad56dce0a80 0 9 9 7.69% 2 2 0 2 0xffff9ad37659ad80 0 1 2 3.85% 1 1 0 ... # ----- HITM ----- -- Store Refs -- --------- Data address --------- # Num Rmt Lcl L1 Hit L1 Miss Offset Node PA cnt Pid # ..... ....... ....... ....... ....... .................. .... ...... ....... # ------------------------------------------------------------- 0 0 2 3 0 0xffff9ad56dca0a80 ------------------------------------------------------------- 0.00% 0.00% 33.33% 0.00% 0x0 0 1 2510 0.00% 0.00% 33.33% 0.00% 0x4 0 1 2476 0.00% 0.00% 33.33% 0.00% 0x20 0 1 0 0.00% 100.00% 0.00% 0.00% 0x38 0 1 0 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-10-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c report: Add span header over cacheline dataJiri Olsa
Forcing the NUMA node output to be grouped with the "Cacheline" column in both "Shared Data Cache Line Table" and "Shared Cache Line Distribution Pareto" tables. Before: # Total Tot ----- LLC Load Hitm ----- # Index Cacheline Node records Hitm Total Lcl Rmt # ..... .................. .... ....... ....... ....... ....... ....... # 0 0x7f0830100000 0 84 10.53% 8 8 0 1 0xffff922a93154200 0 3 2.63% 2 2 0 2 0xffff922a93154500 0 4 2.63% 2 2 0 After: # ------- Cacheline ------ Total Tot ----- LLC Load Hitm ----- # Index Address Node records Hitm Total Lcl Rmt # ..... .................. .... ....... ....... ....... ....... ....... # 0 0x7f0830100000 0 84 10.53% 8 8 0 1 0xffff922a93154200 0 3 2.63% 2 2 0 2 0xffff922a93154500 0 4 2.63% 2 2 0 Before: # ----- HITM ----- -- Store Refs -- Data address # Num Rmt Lcl L1 Hit L1 Miss Offset Node Pid # ..... ....... ....... ....... ....... .................. .... ....... # ------------------------------------------------------------- 0 0 8 32 2 0x7f0830100000 ------------------------------------------------------------- 0.00% 75.00% 21.88% 0.00% 0x18 0 1791 0.00% 12.50% 37.50% 0.00% 0x18 0 1791 0.00% 0.00% 34.38% 0.00% 0x18 0 1791 After: # ----- HITM ----- -- Store Refs -- ----- Data address ----- # Num Rmt Lcl L1 Hit L1 Miss Offset Node Pid # ..... ....... ....... ....... ....... .................. .... ....... # ------------------------------------------------------------- 0 0 8 32 2 0x7f0830100000 ------------------------------------------------------------- 0.00% 75.00% 21.88% 0.00% 0x18 0 1791 0.00% 12.50% 37.50% 0.00% 0x18 0 1791 0.00% 0.00% 34.38% 0.00% 0x18 0 1791 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-9-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c report: Display node for cacheline addressJiri Olsa
Adding the NUMA node info for the data cacheline. Adding the new column to both "Shared Data Cache Line Table" and "Shared Cache Line Distribution Pareto". Note the new 'Node' column next to the 'Cacheline'. $ perf c2c report --stdio ================================================= Shared Data Cache Line Table ================================================= # # Total Tot ----- LLC Load Hitm ----- # Index Cacheline Node records Hitm Total Lcl Rmt # ..... .................. .... ....... ....... ....... ....... ....... # 0 0x7f0830100000 0 84 10.53% 8 8 0 1 0xffff922a93154200 0 3 2.63% 2 2 0 2 0xffff922a93154500 0 4 2.63% 2 2 0 ... Note the new 'Node' column next to the 'Offset'. ================================================= Shared Cache Line Distribution Pareto ================================================= # # ----- HITM ----- -- Store Refs -- Data address # Num Rmt Lcl L1 Hit L1 Miss Offset Node Pid # ..... ....... ....... ....... ....... .................. .... ....... # ------------------------------------------------------------- 0 0 8 32 2 0x7f0830100000 ------------------------------------------------------------- 0.00% 75.00% 21.88% 0.00% 0x18 0 1791 0.00% 12.50% 37.50% 0.00% 0x18 0 1791 0.00% 0.00% 34.38% 0.00% 0x18 0 1791 Using the mem2node object to get the NUMA node data. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-8-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c report: Call calc_width() only for displayed entriesJiri Olsa
There's no need to calculate column widths for entries that are not going to be displayed. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c report: Make calc_width work with struct c2c_hist_entryJiri Olsa
We are going to calculate tje column width based on the struct c2c_hist_entry data, so making calc_width to work with struct c2c_hist_entry. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf c2c record: Record physical addresses in samplesJiri Olsa
We are going to display NUMA node information in following patches. For this we need to have physical address data in the sample. Adding --phys-data as a default option for perf c2c record. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf tests: Add mem2node object testJiri Olsa
Adding mem2node object automated test. The test prepares few artificial nodes - memory maps and verifies the mem2node object returns proper node values to given addresses. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf tools: Add mem2node objectJiri Olsa
Adding mem2node object to allow the easy lookup of the node for the physical address. It has following interface: int mem2node__init(struct mem2node *map, struct perf_env *env); void mem2node__exit(struct mem2node *map); int mem2node__node(struct mem2node *map, u64 addr); The mem2node__toolsinit initialize object from the perf data file MEM_TOPOLOGY feature data. Following calls to mem2node__node will return node number for given physical address. The mem2node__exit function frees the object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf env: Free memory nodes dataJiri Olsa
Forgot to free env's memory nodes, adding needed code to perf_env__exit. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-16perf/core: Clear sibling list of detached eventsMark Rutland
When perf_group_dettach() is called on a group leader, it updates each sibling's group_leader field to point to that sibling, effectively upgrading each siblnig to a group leader. After perf_group_detach has completed, the caller may free the leader event. We only remove siblings from the group leader's sibling_list when the leader has a non-empty group_node. This was fine prior to commit: 8343aae66167df67 ("perf/core: Remove perf_event::group_entry") ... as the sibling's sibling_list would be empty. However, now that we use the sibling_list field as both the list head and the list entry, this leaves each sibling with a non-empty sibling list, including the stale leader event. If perf_group_detach() is subsequently called on a sibling, it will appear to be a group leader, and we'll walk the sibling_list, potentially dereferencing these stale events. In 0day testing, this has been observed to result in kernel panics. Let's avoid this by always removing siblings from the sibling list when we promote them to leaders. Fixes: 8343aae66167df67 ("perf/core: Remove perf_event::group_entry") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: Peter Zijlstra <peterz@infradead.org> Cc: torvalds@linux-foundation.org Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: valery.cherepennikov@intel.com Cc: linux-tip-commits@vger.kernel.org Cc: eranian@google.com Cc: acme@redhat.com Cc: alexander.shishkin@linux.intel.com Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lkml.kernel.org/r/20180316131741.3svgr64yibc6vsid@lakrids.cambridge.arm.com
2018-03-16perf: Fix sibling iterationPeter Zijlstra
Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry") Reported-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: alexander.shishkin@linux.intel.com Cc: torvalds@linux-foundation.org Cc: alexey.budankov@linux.intel.com Cc: valery.cherepennikov@intel.com Cc: eranian@google.com Cc: acme@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: jolsa@redhat.com Link: https://lkml.kernel.org/r/20180315170129.GX4043@hirez.programming.kicks-ass.net
2018-03-13perf/core: Implement fast breakpoint modification via _IOC_MODIFY_ATTRIBUTESMilind Chabbi
Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT) is created, there is no flexibility to change the breakpoint type (bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The only option is to close the perf event and configure a new breakpoint event. This inflexibility has a significant performance overhead. For example, sampling-based, lightweight performance profilers (and also concurrency bug detection tools), monitor different addresses for a short duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to another address or change the kind of breakpoint (bp_type) from "write" to a "read" or vice-versa or change the length (bp_len) of the address being monitored. The cost of these modifications is prohibitive since it involves unmapping the circular buffer associated with the perf event, closing the perf event, opening another perf event and mmaping another circular buffer. Solution: The new ioctl flag for perf events, PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer to a struct perf_event_attr as an argument to update an old breakpoint event with new address, type, and size. This facility allows retaining a previous mmaped perf events ring buffer and avoids having to close and reopen another perf event. This patch supports only changing PERF_TYPE_BREAKPOINT event type; future implementations can extend this feature. The patch replicates some of its functionality of modify_user_hw_breakpoint() in kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called directly since perf_event_ctx_lock() is already held in _perf_ioctl(). Evidence: Experiments show that the baseline (not able to modify an already created breakpoint) costs an order of magnitude (~10x) more than the suggested optimization (having the ability to dynamically modifying a configured breakpoint via ioctl). When the breakpoints typically do not trap, the speedup due to the suggested optimization is ~10x; even when the breakpoints always trap, the speedup is ~4x due to the suggested optimization. Testing: tests posted at https://github.com/linux-contrib/perf_event_modify_bp demonstrate the performance significance of this patch. Tests also check the functional correctness of the patch. Signed-off-by: Milind Chabbi <chabbi.milind@gmail.com> [ Using modify_user_hw_breakpoint_check function. ] [ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-8-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13perf tests: Add breakpoint accounting/modify testJiri Olsa
Adding test that: - detects the number of watch/break-points, skip test if any is missing - detects PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl, skip test if it's missing - detects if watchpoints and breakpoints share same slots - create all possible watchpoints on cpu 0 - change one of it to breakpoint - in case wp and bp do not share slots, we create another watchpoint to ensure the slot accounting is correct Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-9-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13perf/core: Move perf_event_attr::sample_max_stack into perf_copy_attr()Jiri Olsa
Move the sample_max_stack check and setup into perf_copy_attr(), so we have all perf_event_attr initial setup in one place and can easily compare attrs in the new ioctl introduced in following change. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-7-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13hw_breakpoint: Add perf_event_attr fields check in __modify_user_hw_breakpoint()Jiri Olsa
And rename it to modify_user_hw_breakpoint_check(). We are about to use modify_user_hw_breakpoint_check() for user space breakpoints modification, we must be very strict to check only the fields we can change have changed. As Peter explained: "Suppose someone does: attr = malloc(sizeof(*attr)); // uninitialized memory attr->type = BP; attr->bp_addr = new_addr; attr->bp_type = bp_type; attr->bp_len = bp_len; ioctl(fd, PERF_IOC_MOD_ATTR, &attr); And feeds absolute shite for the rest of the fields. Then we later want to extend IOC_MOD_ATTR to allow changing attr::sample_type but we can't, because that would break the above application." I'm making this check optional because we already export modify_user_hw_breakpoint() and with this check we could break existing users. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-6-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13hw_breakpoint: Factor out __modify_user_hw_breakpoint() functionJiri Olsa
Moving out all the functionality without the events disabling/enabling calls, because we want to call another disabling/enabling functions in following change. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-5-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13hw_breakpoint: Add modify_bp_slot() functionJiri Olsa
Add the modify_bp_slot() function to keep slot numbers correct when changing the breakpoint type. Using existing __release_bp_slot()/__reserve_bp_slot() call sequence to update the slot counts. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-4-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13hw_breakpoint: Pass bp_type argument to __reserve_bp_slot|__release_bp_slot()Jiri Olsa
Passing bp_type argument to __reserve_bp_slot() and __release_bp_slot() functions, so we can pass another bp_type than the one defined in bp->attr.bp_type. This will be handy in following change that fixes breakpoint slot counts during its modification. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-3-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13hw_breakpoint: Pass bp_type directly as find_slot_idx() argumentJiri Olsa
Pass bp_type directly as a find_slot_idx() argument, so we don't need to have whole event to get the breakpoint slot type. It will be used in following changes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-2-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Fix installing cgroup events on CPUleilei.lin
There's two problems when installing cgroup events on CPUs: firstly list_update_cgroup_event() only tries to set cpuctx->cgrp for the first event, if that mismatches on @cgrp we'll not try again for later additions. Secondly, when we install a cgroup event into an active context, only issue an event reprogram when the event matches the current cgroup context. This avoids a pointless event reprogramming. Signed-off-by: leilei.lin <leilei.lin@alibaba-inc.com> [ Improved the changelog and comments. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: brendan.d.gregg@gmail.com Cc: eranian@gmail.com Cc: linux-kernel@vger.kernel.org Cc: yang_oliver@hotmail.com Link: http://lkml.kernel.org/r/20180306093637.28247-1-linxiulei@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Optimize perf_rotate_context() event schedulingPeter Zijlstra
The event schedule order (as per perf_event_sched_in()) is: - cpu pinned - task pinned - cpu flexible - task flexible But perf_rotate_context() will unschedule cpu-flexible even if it doesn't need a rotation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Fix tree based event rotationPeter Zijlstra
Similar to how first programming cpu=-1 and then cpu=# is wrong, so is rotating both. It was especially wrong when we were still programming the PMU in this same order, because in that scenario we might never actually end up running cpu=# events at all. Cure this by using the active_list to pick the rotation event; since at programming we already select the left-most event. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Simpify perf_event_groups_for_each()Peter Zijlstra
The last argument is, and always must be, the same. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Optimize ctx_sched_out()Peter Zijlstra
When an event group contains more events than can be scheduled on the hardware, iterating the full event group for ctx_sched_out is a waste of time. Keep track of the events that got programmed on the hardware, such that we can iterate this smaller list in order to schedule them out. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Remove perf_event::group_entryPeter Zijlstra
Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Fix event schedule orderPeter Zijlstra
Scheduling in events with cpu=-1 before events with cpu=# changes semantics and is undesirable in that it would priorize these events. Given that groups->index is across all groups we actually have an inter-group ordering, meaning we can merge-sort two groups, which is just what we need to preserve semantics. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Cleanup the rb-tree codePeter Zijlstra
Trivial comment and code fixups.. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/cor: Use RB trees for pinned/flexible groupsAlexey Budankov
Change event groups into RB trees sorted by CPU and then by a 64bit index, so that multiplexing hrtimer interrupt handler would be able skipping to the current CPU's list and ignore groups allocated for the other CPUs. New API for manipulating event groups in the trees is implemented as well as adoption on the API in the current implementation. pinned_group_sched_in() and flexible_group_sched_in() API are introduced to consolidate code enabling the whole group from pinned and flexible groups appropriately. Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/372f9c8b-0cfe-4240-e44d-83d863d40813@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12perf/core: Fix perf_output_read_group()Peter Zijlstra
Mark reported his arm64 perf fuzzer runs sometimes splat like: armv8pmu_read_counter+0x1e8/0x2d8 armpmu_event_update+0x8c/0x188 armpmu_read+0xc/0x18 perf_output_read+0x550/0x11e8 perf_event_read_event+0x1d0/0x248 perf_event_exit_task+0x468/0xbb8 do_exit+0x690/0x1310 do_group_exit+0xd0/0x2b0 get_signal+0x2e8/0x17a8 do_signal+0x144/0x4f8 do_notify_resume+0x148/0x1e8 work_pending+0x8/0x14 which asserts that we only call pmu::read() on ACTIVE events. The above callchain does: perf_event_exit_task() perf_event_exit_task_context() task_ctx_sched_out() // INACTIVE perf_event_exit_event() perf_event_set_state(EXIT) // EXIT sync_child_event() perf_event_read_event() perf_output_read() perf_output_read_group() leader->pmu->read() Which results in doing a pmu::read() on an !ACTIVE event. I _think_ this is 'new' since we added attr.inherit_stat, which added the perf_event_read_event() to the exit path, without that perf_event_read_output() would only trigger from samples and for @event to trigger a sample, it's leader _must_ be ACTIVE too. Still, adding this check makes it consistent with the @sub case for the siblings. Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09Merge tag 'perf-core-for-mingo-4.17-20180308' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Support to display the IPC/Cycle in 'annotate' TUI, for systems where this info can be obtained, like Intel's >= Skylake (Jin Yao) - Support wildcards on PMU name in dynamic PMU events (Agustin Vega-Frias) - Display pmu name when printing unmerged events in stat (Agustin Vega-Frias) - Auto-merge PMU events created by prefix or glob match (Agustin Vega-Frias) - Fix s390 'call' operations target function annotation (Thomas Richter) - Handle s390 PC relative load and store instruction in the augmented 'annotate', code, used so far in the TUI modes of 'perf report' and 'perf annotate' (Thomas Richter) - Provide libtraceevent with a kernel symbol resolver, so that symbols in tracepoint fields can be resolved when showing them in tools such as 'perf report' (Wang YanQing) - Refactor the cgroups code to look more like other code in tools/perf, using cgroup__{put,get} for refcount operations instead of its open-coded equivalent, breaking larger functions, etc (Arnaldo Carvalho de Melo) - Implement support for the -G/--cgroup target in 'perf trace', allowing strace like tracing (plus other events, backtraces, etc) for cgroups (Arnaldo Carvalho de Melo) - Update thread shortname in 'perf sched map' when the thread's COMM changes (Changbin Du) - refcount 'struct mem_info', for better sharing it over several users, avoid duplicating structs and fixing crashes related to use after free (Jiri Olsa) - Display perf.data version, offsets in 'perf report --header' (Jiri Olsa) - Record the machine's memory topology information in a perf.data feature section, to be used by tools such as 'perf c2c' (Jiri Olsa) - Fix output of forced groups in the header for 'perf report' --stdio and --tui (Jiri Olsa) - Better support llvm, clang, cxx make tests in the build process (Jiri Olsa) - Streamline the 'struct perf_mmap' methods, storing some info in the struct instead of passing it via various methods, shortening its signatures (Kan Liang) - Update the quipper perf.data parser library site information (Stephane Eranian) - Correct perf's man pages title markers for asciidoctor (Takashi Iwai) - Intel PT fixes and refactorings paving the way for implementing support for AUX area sampling (Adrian Hunter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel: Disable userspace RDPMC usage for large PEBSKan Liang
Userspace RDPMC cannot possibly work for large PEBS, which was introduced in: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") When the PEBS interrupt threshold is larger than one, there is no way to get exact auto-reload times and value for userspace RDPMC. Disable the userspace RDPMC usage when large PEBS is enabled. The only exception is when the PEBS interrupt threshold is 1, in which case user-space RDPMC works well even with auto-reload events. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Fixes: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") Link: http://lkml.kernel.org/r/1518474035-21006-6-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel: Fix PMU read for auto-reloadKan Liang
Auto-reload events needs to be specially handled in event count read. Auto-reload is only available for intel_pmu. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Fixes: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") Link: http://lkml.kernel.org/r/1518474035-21006-5-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel/ds: Introduce ->read() function for auto-reload events and ↵Kan Liang
flush the PEBS buffer there There is no way to get exact auto-reload times and values which are needed for event updates unless we flush the PEBS buffer. Introduce intel_pmu_auto_reload_read() to drain the PEBS buffer for auto reload event. To prevent races with the hardware, we can only call drain_pebs() when the PMU is disabled. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/1518474035-21006-4-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86: Introduce a ->read() callback in 'struct x86_pmu'Kan Liang
Auto-reload needs to be specially handled when reading event counts. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/1518474035-21006-3-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel: Fix event update for auto-reloadKan Liang
There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Fixes: 851559e35fd5 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Link: http://lkml.kernel.org/r/1518474035-21006-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel: Properly save/restore the PMU state in the NMI handlerKan Liang
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated accordingly. This is fine in current usage because no-one checks it - but fix it for future code: for example, the drain_pebs() will be modified to fix an auto-reload bug. Properly save/restore the old PMU state. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: kernel test robot <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/6f44ee84-56f8-79f1-559b-08e371eaeb78@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09perf/x86/intel: Fix large period handling on Broadwell CPUsKan Liang
Large fixed period values could be truncated on Broadwell, for example: perf record -e cycles -c 10000000000 Here the fixed period is 0x2540BE400, but the period which finally applied is 0x540BE400 - which is wrong. The reason is that x86_pmu::limit_period() uses an u32 parameter, so the high 32 bits of 'period' get truncated. This bug was introduced in: commit 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") It's safe to use u64 instead of u32: - Although the 'left' is s64, the value of 'left' must be positive when calling limit_period(). - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch the higher 32 bits. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") Link: http://lkml.kernel.org/r/1519926894-3520-1-git-send-email-kan.liang@linux.intel.com [ Rewrote unacceptably bad changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08perf tools: Update quipper informationStephane Eranian
This patch updates the links to the Quipper library. It is now available from GitHub and has been updated. Reported-by: Lakshman Annadorai <lakshmana@google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Handle s390 PC relative load and store instruction.Thomas Richter
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Support to display the IPC/Cycle in TUI modeJin Yao
Unlike the perf report interactive annotate mode, the perf annotate doesn't display the IPC/Cycle even if branch info is recorded in perf data file. perf record -b ... perf annotate function It should show IPC/cycle, but it doesn't. This patch lets perf annotate support the displaying of IPC/Cycle if branch info is in perf data. For example, perf annotate compute_flag Percent│ IPC Cycle │ │ │ Disassembly of section .text: │ │ 0000000000400640 <compute_flag>: │ compute_flag(): │ volatile int count; │ static unsigned int s_randseed; │ │ __attribute__((noinline)) │ int compute_flag() │ { 22.96 │1.18 584 sub $0x8,%rsp │ int i; │ │ i = rand() % 2; 23.02 │1.18 1 → callq rand@plt │ │ return i; 27.05 │3.37 mov %eax,%edx │ } │3.37 add $0x8,%rsp │ { │ int i; │ │ i = rand() % 2; │ │ return i; │3.37 shr $0x1f,%edx │3.37 add %edx,%eax │3.37 and $0x1,%eax │3.37 sub %edx,%eax │ } 26.97 │3.37 2 ← retq Note that, this patch only supports TUI mode. For stdio, now it just keeps original behavior. Will support it in a follow-up patch. $ perf annotate compute_flag --stdio Percent | Source code & Disassembly of div for cycles:ppp (7993 samples) ------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000400640 <compute_flag>: : compute_flag(): : volatile int count; : static unsigned int s_randseed; : : __attribute__((noinline)) : int compute_flag() : { 0.29 : 400640: sub $0x8,%rsp # +100.00% : int i; : : i = rand() % 2; 42.93 : 400644: callq 400490 <rand@plt> # -100.00% (p:100.00%) : : return i; 0.10 : 400649: mov %eax,%edx # +100.00% : } 0.94 : 40064b: add $0x8,%rsp : { : int i; : : i = rand() % 2; : : return i; 27.02 : 40064f: shr $0x1f,%edx 0.15 : 400652: add %edx,%eax 1.24 : 400654: and $0x1,%eax 2.08 : 400657: sub %edx,%eax : } 25.26 : 400659: retq # -100.00% (p:100.00%) Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20180223170210.GC7045@tassilo.jf.intel.com Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1519724327-7773-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf report: Provide libtraceevent with a kernel symbol resolverWang YanQing
So that beautifiers wanting to resolve kernel function addresses to names can do its work, and when we use "perf report" for output of "perf kmem record", we will get kernel symbol output. This patch affect the output of "perf report" for the record data generated by "perf kmem record" looks like below: Before patch: 0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC 0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO After patch: 0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO 0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC Signed-off-by: Wang YanQing <udknight@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180308032850.GA12383@udknight-ThinkPad-E550 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Force llvm/clang test compile output to .make.outputJiri Olsa
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang make targets to FILESJiri Olsa
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang/cxx make tests into FEATURE_TESTS_EXTRAJiri Olsa
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf tools: Update tags with .cpp filesJiri Olsa
We have some .cpp files, make ctags/cscope aware of them. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-17-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf tools: Add MEM_TOPOLOGY feature to perf data fileJiri Olsa
Adding MEM_TOPOLOGY feature to perf data file, that will carry physical memory map and its node assignments. The format of data in MEM_TOPOLOGY is as follows: 0 - version | for future changes 8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes 16 - count | number of nodes For each node we store map of physical indexes for each node: 32 - node id | node index 40 - size | size of bitmap 48 - bitmap | bitmap of memory indexes that belongs to node | /sys/devices/system/node/node<NODE>/memory<INDEX> The MEM_TOPOLOGY could be displayed with following report command: $ perf report --header-only -I ... # memory nodes (nr 1, block size 0x8000000): # 0 [7G]: 0-23,32-69 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org [ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf c2c: Use mem_info refcnt logicJiri Olsa
Switch to refcnt logic instead of duplicating mem_info objects. No functional change, just saving some memory. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf tools: Add refcnt into struct mem_infoJiri Olsa
It's passed along several hists entries in --hierarchy mode, so it's better we keep track of it. The current fail I see is that it gets removed in hierarchy --mem-mode mode, where it's shared in the different hierarchies, but removed from the template hist entry, so the report crashes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-6-jolsa@kernel.org [ Rename mem_info__aloc() to mem_info__new(), to fix the typo and use the convention for constructors ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-06 14:31:30 +0000