summary refs log tree commit diff
AgeCommit message (Collapse)Author
2018-09-27Bluetooth: hci_serdev: Fixed error space required before open paranethesisJagdish Tirumala
Fixed error in space required before paranthesis in drivers/bluetooth/hci_serdev.c Signed-off-by: Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: Add definitions and track LE resolve list modificationAnkit Navik
Add the definitions for adding entries to the LE resolve list and removing entries from the LE resolve list. When the LE resolve list gets changed via HCI commands make sure that the internal storage of the resolve list entries gets updated. Signed-off-by: Ankit Navik <ankit.p.navik@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990Balakrishna Godavarthi
This patch enables power off support for hci down and power on support for hci up. As wcn3990 power sources are ignited by regulators, we will turn off them during hci down, i.e. an complete power off of wcn3990. So while hci up, will call vendor setup which will turn on the regulators, requests BT chip version and download the firmware. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btusb: Add quirk for BTUSB_INTEL_NEWJustin TerAvest
Intel "new" controllers can do both LE scan and BR/EDR inquiry at once. Signed-off-by: Justin TerAvest <teravest@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Make array extension_sig static, shrinks object sizeColin Ian King
Don't populate the array extension_sig on the stack but instead make it static. Makes the object code smaller by 75 bytes: Before: text data bss dec hex filename 14325 4920 0 19245 4b2d drivers/bluetooth/btrtl.o After: text data bss dec hex filename 14186 4984 0 19170 4ae2 drivers/bluetooth/btrtl.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_serdev: Add protocol check in hci_uart_dequeue().Balakrishna Godavarthi
This will help to check the status of protocol while dequeuing an skb packet. In some instaces we will end up kernel crash, where proto close is called and we trying to dequeue an packet. [ 500.142902] [<ffffff80080f9ce4>] do_raw_spin_lock+0x1c/0xe0 [ 500.148643] [<ffffff80088f1c7c>] _raw_spin_lock_irqsave+0x38/0x48 [ 500.154917] [<ffffff8008780ce8>] skb_dequeue+0x28/0x84 [ 500.160209] [<ffffff8000ad6f48>] 0xffffff8000ad6f48 [ 500.165230] [<ffffff8000ad6610>] 0xffffff8000ad6610 [ 500.170257] [<ffffff80080c7ce8>] process_one_work+0x238/0x3e4 [ 500.176174] [<ffffff80080c8330>] worker_thread+0x2bc/0x3d4 [ 500.181821] [<ffffff80080cdabc>] kthread+0x138/0x140 [ 500.186945] [<ffffff80080844e0>] ret_from_fork+0x10/0x18 Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto racesBalakrishna Godavarthi
Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers before running the proto close function pointer. There is chance of kernel crash, due to usage of non proto close function pointers after proto close. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove hdev dereference in qca_close().Balakrishna Godavarthi
When flag KASAN is set, we are seeing an following crash while removing hci_uart module. [ 50.589909] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b73 [ 50.597902] Mem abort info: [ 50.600846] Exception class = DABT (current EL), IL = 32 bits [ 50.606959] SET = 0, FnV = 0 [ 50.610142] EA = 0, S1PTW = 0 [ 50.613396] Data abort info: [ 50.616401] ISV = 0, ISS = 0x00000004 [ 50.620373] CM = 0, WnR = 0 [ 50.623466] [006b6b6b6b6b6b73] address between user and kernel address ranges [ 50.630818] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 50.671670] PC is at qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.677593] LR is at qca_close+0x74/0xb0 [hci_uart] [ 50.775689] Process rmmod (pid: 2144, stack limit = 0xffffff801ba90000) [ 50.782493] Call trace: [ 50.872150] [<ffffff8000c3c81c>] qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.879138] [<ffffff8000c3c968>] qca_close+0x74/0xb0 [hci_uart] [ 50.885238] [<ffffff8000c3a71c>] hci_uart_unregister_device+0x44/0x50 [hci_uart] [ 50.892846] [<ffffff8000c3c9f4>] qca_serdev_remove+0x50/0x5c [hci_uart] [ 50.899654] [<ffffff800844f630>] serdev_drv_remove+0x28/0x38 [ 50.905489] [<ffffff800850fc44>] device_release_driver_internal+0x140/0x1e4 [ 50.912653] [<ffffff800850fd94>] driver_detach+0x78/0x84 [ 50.918121] [<ffffff800850edac>] bus_remove_driver+0x80/0xa8 [ 50.923942] [<ffffff80085107dc>] driver_unregister+0x4c/0x58 [ 50.929768] [<ffffff8000c3ca8c>] qca_deinit+0x24/0x598 [hci_uart] [ 50.936045] [<ffffff8000c3ca10>] hci_uart_exit+0x10/0x48 [hci_uart] [ 50.942495] [<ffffff8008136630>] SyS_delete_module+0x17c/0x224 This crash is due to dereference of hdev, after freeing it. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove serdev_device_open/close function callsBalakrishna Godavarthi
Removed serdev_device_open/close functions from qca_open/close as they are called in hci_uart_register_device() and hci_uart_unregister_device() functions. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: Remove unnecessary smp_mb__{before,after}_atomicAndrea Parri
The barriers are unneeded; wait_woken() and woken_wake_function() already provide us with the required synchronization: remove them and document that we're relying on the (implicit) synchronization provided by wait_woken() and woken_wake_function(). Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: mvneta: Add support for 2500Mbps SGMIIMaxime Chevallier
The mvneta controller can handle speeds up to 2500Mbps on the SGMII interface. This relies on serdes configuration, the lane must be configured at 3.125Gbps and we can't use in-band autoneg at that speed. The main issue when supporting that speed on this particular controller is that the link partner can send ethernet frames with a shortened preamble, which if not explicitly enabled in the controller will cause unexpected behaviours. This was tested on Armada 385, with the comphy configuration done in bootloader. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26Merge branch 'net-vhost-improve-performance-when-enable-busyloop'David S. Miller
Tonghao Zhang says: ==================== net: vhost: improve performance when enable busyloop This patches improve the guest receive performance. On the handle_tx side, we poll the sock receive queue at the same time. handle_rx do that in the same way. For more performance report, see patch 4 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: vhost: add rx busy polling in tx pathTonghao Zhang
This patch improves the guest receive performance. On the handle_tx side, we poll the sock receive queue at the same time. handle_rx do that in the same way. We set the poll-us=100us and use the netperf to test throughput and mean latency. When running the tests, the vhost-net kthread of that VM, is alway 100% CPU. The commands are shown as below. Rx performance is greatly improved by this patch. There is not notable performance change on tx with this series though. This patch is useful for bi-directional traffic. netperf -H IP -t TCP_STREAM -l 20 -- -O "THROUGHPUT, THROUGHPUT_UNITS, MEAN_LATENCY" Topology: [Host] ->linux bridge -> tap vhost-net ->[Guest] TCP_STREAM: * Without the patch: 19842.95 Mbps, 6.50 us mean latency * With the patch: 37598.20 Mbps, 3.43 us mean latency Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: vhost: factor out busy polling logic to vhost_net_busy_poll()Tonghao Zhang
Factor out generic busy polling logic and will be used for in tx path in the next patch. And with the patch, qemu can set differently the busyloop_timeout for rx queue. To avoid duplicate codes, introduce the helper functions: * sock_has_rx_data(changed from sk_has_rx_data) * vhost_net_busy_poll_try_queue Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: vhost: replace magic number of lock annotationTonghao Zhang
Use the VHOST_NET_VQ_XXX as a subclass for mutex_lock_nested. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: vhost: lock the vqs one by oneTonghao Zhang
This patch changes the way that lock all vqs at the same, to lock them one by one. It will be used for next patch to avoid the deadlock. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26tcp: expose sk_state in tcp_retransmit_skb tracepointYafang Shao
After sk_state exposed, we can get in which state this retransmission occurs. That could give us more detail for dignostic. For example, if this retransmission occurs in SYN_SENT state, it may also indicates that the syn packet may be dropped on the remote peer due to syn backlog queue full and then we could check the remote peer. BTW,SYNACK retransmission is traced in tcp_retransmit_synack tracepoint. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: faraday: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: smsc: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: liquidio: list usage cleanupzhong jiang
Trival cleanup, list_move_tail will implement the same function that list_del() + list_add_tail() will do. hence just replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: qed: list usage cleanupzhong jiang
Trival cleanup, list_move_tail will implement the same function that list_del() + list_add_tail() will do. hence just replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26Merge branch 'net-bridge-convert-bool-options-to-bits'David S. Miller
Nikolay Aleksandrov says: ==================== net: bridge: convert bool options to bits A lot of boolean bridge options have been added around the net_bridge structure resulting in holes and more importantly different cache lines that need to be fetched in the fast path. This set moves all of those to bits in a bitfield which resides in a hot cache line thus reducing the size of net_bridge, the number of holes and the number of cache lines needed for the fast path. The set is also sent in preparation for new boolean options to avoid spreading them in the structure and making new holes. One nice side-effect is that we avoid potential race conditions by using the bitops since some of the options were bits being directly set in parallel risking hard to debug issues (has_ipv6_addr). Before: size: 1184, holes: 8, sum holes: 30 After: size: 1160, holes: 3, sum holes: 7 Patch 01 is a trivial style fix Patch 02 adds the new options bitfield and converts the vlan boolean options to bits Patches 03-08 convert the rest of the boolean options to bits Patch 09 re-arranges a few fields in net_bridge to further reduce size v2: patch 09: remove the comment about offload_fwd_mark in net_bridge and leave it where it is now, thanks to Ido for spotting it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: pack net_bridge betterNikolay Aleksandrov
Further reduce the size of net_bridge with 8 bytes and reduce the number of holes in it: Before: holes: 5, sum holes: 15 After: holes: 3, sum holes: 7 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert mtu_set_by_user to a bitNikolay Aleksandrov
Convert the last remaining bool option to a bit thus reducing the overall net_bridge size further by 8 bytes. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert neigh_suppress_enabled option to a bitNikolay Aleksandrov
Convert the neigh_suppress_enabled option to a bit. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert mcast options to bitsNikolay Aleksandrov
This patch converts the rest of the mcast options to bits. It also packs the mcast options a little better by moving multicast_mld_version to an existing hole, reducing the net_bridge size by 8 bytes. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert and rename mcast disabledNikolay Aleksandrov
Convert mcast disabled to an option bit and while doing so convert the logic to check if multicast is enabled instead. That is make the logic follow the option value - if it's set then mcast is enabled and vice versa. This avoids a few confusing places where we inverted the value that's being set to follow the mcast_disabled logic. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert group_addr_set option to a bitNikolay Aleksandrov
Convert group_addr_set internal bridge opt to a bit. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: convert nf call options to bitsNikolay Aleksandrov
No functional change, convert of nf_call_[ip|ip6|arp]tables to bits. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: add bitfield for options and convert vlan optsNikolay Aleksandrov
Bridge options have usually been added as separate fields all over the net_bridge struct taking up space and ending up in different cache lines. Let's move them to a single bitfield to save up space and speedup lookups. This patch adds a simple API for option modifying and retrieving using bitops and converts the first user of the API - the bridge vlan options (vlan_enabled and vlan_stats_enabled). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net: bridge: make struct opening bracket consistentNikolay Aleksandrov
Currently we have a mix of opening brackets on new lines and on the same line, let's move them all on the same line. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26Merge branch 's390-net-next'David S. Miller
Julian Wiedmann says: ==================== s390/net: updates 2018-09-26 please apply one more series of cleanups and small improvements for qeth to net-next. Note that one patch needs to touch both af_iucv and qeth, in order to untangle their receive paths. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: remove duplicated carrier state trackingJulian Wiedmann
The netdevice is always available, apply any carrier state changes to it without caching them. On a STARTLAN event (ie. carrier-up), defer updating the state to qeth_core_hardsetup_card() in the subsequent recovery action. Also remove the carrier-state checks from the xmit routines. Stopping transmission on carrier-down is the responsibility of upper-level code (eg see dev_direct_xmit()). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: clean up drop conditions for received cmdsJulian Wiedmann
If qeth_check_ipa_data() consumed an event, there's no point in processing it further. So drop it early, and make the surrounding code a tiny bit more readable. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: re-indent qeth_check_ipa_data()Julian Wiedmann
Pull one level of checking up into qeth_send_control_data_cb(), and clean up an else-after-return. No functional change. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: consume local address eventsJulian Wiedmann
We have no code that is waiting for these events, so just drop them when they arrive. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: remove various redundant codeJulian Wiedmann
1. tracing iob->rc makes no sense when it hasn't been modified by the callback, 2. the qeth_dbf_list is declared with LIST_HEAD, which also initializes the list, 3. the ccwgroup core only calls the thaw/restore callbacks if the gdev is online, so we don't have to check for it again. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: remove CARD_FROM_CDEV helperJulian Wiedmann
The cdev-to-card translation walks through two layers of drvdata, with no locking or refcounting (where eg. the ccwgroup core only accesses a cdev's drvdata while holding the ccwlock). This might be safe for now, but any careless usage of the helper has the potential for subtle races and use-after-free's. Luckily there's only one occurrence where we _really_ need it (in qeth_irq()), for any other user we can just pass through an appropriate card pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: pass card pointer in iob callbackJulian Wiedmann
This allows us to remove the CARD_FROM_CDEV calls in the iob callbacks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: re-use qeth_notify_skbs()Julian Wiedmann
When not using the CQ, this allows us avoid the second skb queue walk in qeth_release_skbs(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: remove additional skb refcountJulian Wiedmann
This was presumably left over from back when qeth recursed into dev_queue_xmit(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: replace open-coded skb_queue_walk()Julian Wiedmann
To match the use of __skb_queue_purge(), also make the skb's enqueue in qeth_fill_buffer() lockless. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net/af_iucv: locate IUCV header via skb_network_header()Julian Wiedmann
This patch attempts to untangle the TX and RX code in qeth from af_iucv's respective HiperTransport path: On the TX side, pointing skb_network_header() at the IUCV header means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset to access the header. On the RX side, qeth pulls the (fake) L2 header off the skb like any normal ethernet driver would. This makes working with the IUCV header in af_iucv easier, since we no longer have to assume a fixed skb layout. While at it, replace the open-coded length checks in af_iucv's RX path with pskb_may_pull(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: on gdev release, reset drvdataJulian Wiedmann
qeth_core_probe_device() sets the gdev's drvdata, but doesn't reset it on a subsequent error. Move the (re-)setting around a bit, so that it happens symmetrically on allocating/freeing the qeth_card struct. This is no actual problem, as the ccwgroup core will discard the gdev on a probe error. But from qeth's perspective the gdev is an external resource, so it's best to manage it cleanly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: fix discipline unload after setup errorJulian Wiedmann
Device initialization code usually first loads a subdriver (via qeth_core_load_discipline()), and then runs its setup() callback. If this fails, it rolls back the load via qeth_core_free_discipline(). qeth_core_free_discipline() expects the options.layer attribute to be initialized, but on error in setup() that's currently not the case. Resulting in misbalanced symbol_put() calls. Fix this by setting options.layer when loading the subdriver. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: use DEFINE_MUTEX for qeth_mod_mutexJulian Wiedmann
Consolidate declaration and initialization of a static variable. While at it reduce its scope in qeth_core_load_discipline(), and simplify the return logic accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26s390/qeth: convert layer attribute to enumJulian Wiedmann
While the raw values are fixed due to their use in a sysfs attribute, we can still use the proper QETH_DISCIPLINE_* enum within the driver. Also move the initialization into qeth_set_initial_options(), along with all other user-configurable fields. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25net: phy: marvell: Fix build.David S. Miller
Local variable 'autoneg' doesn't even exist: drivers/net/phy/marvell.c: In function 'm88e1121_config_aneg': drivers/net/phy/marvell.c:468:25: error: 'autoneg' undeclared (first use in this function); did you mean 'put_net'? if (phydev->autoneg != autoneg || changed) { ^~~~~~~ Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset") Reported-by:Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-10 17:22:16 +0000