| Age | Commit message (Collapse) | Author |
|---|
|
Require that the TCG_PCR_EVENT2.digests.count value strictly matches the
value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the
TCG_PCClientPCREvent event log header. Also require that
TCG_EfiSpecIdEvent.numberOfAlgorithms is non-zero.
The TCG PC Client Platform Firmware Profile Specification section 9.1
(Family "2.0", Level 00 Revision 1.04) states:
For each Hash algorithm enumerated in the TCG_PCClientPCREvent entry,
there SHALL be a corresponding digest in all TCG_PCR_EVENT2 structures.
Note: This includes EV_NO_ACTION events which do not extend the PCR.
Section 9.4.5.1 provides this description of
TCG_EfiSpecIdEvent.numberOfAlgorithms:
The number of Hash algorithms in the digestSizes field. This field MUST
be set to a value of 0x01 or greater.
Enforce these restrictions, as required by the above specification, in
order to better identify and ignore invalid sequences of bytes at the
end of an otherwise valid TPM2 event log. Firmware doesn't always have
the means necessary to inform the kernel of the actual event log size so
the kernel's event log parsing code should be stringent when parsing the
event log for resiliency against firmware bugs. This is true, for
example, when firmware passes the event log to the kernel via a reserved
memory region described in device tree.
POWER and some ARM systems use the "linux,sml-base" and "linux,sml-size"
device tree properties to describe the memory region used to pass the
event log from firmware to the kernel. Unfortunately, the
"linux,sml-size" property describes the size of the entire reserved
memory region rather than the size of the event long within the memory
region and the event log format does not include information describing
the size of the event log.
tpm_read_log_of(), in drivers/char/tpm/eventlog/of.c, is where the
"linux,sml-size" property is used. At the end of that function,
log->bios_event_log_end is pointing at the end of the reserved memory
region. That's typically 0x10000 bytes offset from "linux,sml-base",
depending on what's defined in the device tree source.
The firmware event log only fills a portion of those 0x10000 bytes and
the rest of the memory region should be zeroed out by firmware. Even in
the case of a properly zeroed bytes in the remainder of the memory
region, the only thing allowing the kernel's event log parser to detect
the end of the event log is the following conditional in
__calc_tpm2_event_size():
if (event_type == 0 && event_field->event_size == 0)
size = 0;
If that wasn't there, __calc_tpm2_event_size() would think that a 16
byte sequence of zeroes, following an otherwise valid event log, was
a valid event.
However, problems can occur if a single bit is set in the offset
corresponding to either the TCG_PCR_EVENT2.eventType or
TCG_PCR_EVENT2.eventSize fields, after the last valid event log entry.
This could confuse the parser into thinking that an additional entry is
present in the event log and exposing this invalid entry to userspace in
the /sys/kernel/security/tpm0/binary_bios_measurements file. Such
problems have been seen if firmware does not fully zero the memory
region upon a warm reboot.
This patch significantly raises the bar on how difficult it is for
stale/invalid memory to confuse the kernel's event log parser but
there's still, ultimately, a reliance on firmware to properly initialize
the remainder of the memory region reserved for the event log as the
parser cannot be expected to detect a stale but otherwise properly
formatted firmware event log entry.
Fixes: fd5c78694f3f ("tpm: fix handling of the TPM 2.0 event logs")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into master
Pull s390 fixes from Heiko Carstens:
- Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH
to reflect reality and avoid further confusion. This is a user space
visible change therefore the commit has also a stable tag for 5.7,
where this counter was introduced.
- Add Matthew Rosato as s390 IOMMU maintainer.
* tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add Matthew for s390 IOMMU
s390/cpum_cf,perf: change DFLT_CCERROR counter name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat into master
Pull exfat fixes from Namjae Jeon:
- fix overflow issue at sector calculation
- fix wrong hint_stat initialization
- fix wrong size update of stream entry
- fix endianness of upname in name_hash computation
* tag 'exfat-for-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix name_hash computation on big endian systems
exfat: fix wrong size update of stream entry by typo
exfat: fix wrong hint_stat initialization in exfat_find_dir_entry()
exfat: fix overflow issue in exfat_cluster_to_sector()
|
|
Acked-By: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"This became fairly large, containing mostly the collection of ASoC
fixes that slipped from the previous request, so I sent now a bit
earlier than usual. But all changes look small and mostly
device-specific, hence nothing to worry too much.
Majority of changes are for x86 based platforms and their CODEC
drivers, in order to address some issues hit by their recent tests and
fuzzing. The rest are other ASoC device-specific fixes (imx, qcom,
wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING
hit by syzkaller"
* tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ASoC: rt5682: Report the button event in the headset type only
ASoC: Intel: bytcht_es8316: Add missed put_device()
ASoC: rt5682: Enable Vref2 under using PLL2
ASoC: rt286: fix unexpected interrupt happens
ASoC: wm8974: remove unsupported clock mode
ASoC: wm8974: fix Boost Mixer Aux Switch
ASoC: SOF: core: fix null-ptr-deref bug during device removal
ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend
ASoC: codecs: max98373: Removed superfluous volume control from chip default
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: fix kernel oops on route addition error
ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M
ASoC: Intel: bdw-rt5677: fix non BE conversion
ASoC: soc-dai: set dai_link dpcm_ flags with a helper
MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl
ASoC: core: Remove only the registered component in devm functions
MAINTAINERS: Change Maintainer for some at91 drivers
ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings
...
|
|
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15.
This counter counts completed DEFLATE instructions with exit code
0, 1 or 2. Since exit code 0 means success and exit code 1 or 2
indicate errors, change the counter name to avoid confusion.
This counter is incremented each time the DEFLATE instruction
completed regardless if an error was detected or not.
Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15")
Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On-disk format for name_hash field is LE, so it must be explicitly
transformed on BE system for proper result.
Fixes: 370e812b3ec1 ("exfat: add nls operations")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
The stream.size field is updated to the value of create timestamp
of the file entry. Fix this to use correct stream entry pointer.
Fixes: 29bbb14bfc80 ("exfat: fix incorrect update of stream entry in __exfat_truncate()")
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
We found the wrong hint_stat initialization in exfat_find_dir_entry().
It should be initialized when cluster is EXFAT_EOF_CLUSTER.
Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
An overflow issue can occur while calculating sector in
exfat_cluster_to_sector(). It needs to cast clus's type to sector_t
before left shifting.
Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
Pull VFIO fix from Alex Williamson:
"Fix race with eventfd ctx cleared outside of mutex (Zeng Tao)"
* tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio:
vfio/pci: fix racy on error and request eventfd ctx
|
|
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
'perf record --switch-output-event event-name' usage"
* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools arch kvm: Sync kvm headers with the kernel sources
perf tools: Sync hashmap.h with libbpf's
libsubcmd: Fix OPT_CALLBACK_SET()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer wheel:
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can
be set back as well. This can lead to timers expiring early. Add a
sanity check to prevent this.
- When a timer is queued with an expiry time beyond the wheel
capacity then it should be queued in the bucket of the last wheel
level which is expiring last.
The code adjusted the expiry time to the maximum wheel capacity,
which is only correct when the wheel clock is 0. Aside of that the
check whether the delta is larger than wheel capacity does not
check the delta, it checks the expiry value itself. As a result
timers can expire at random.
Fix this by checking the right variable and adjust expiry time so
it becomes base->clock plus capacity which places it into the
outmost bucket in the last wheel level"
* tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Plug a load average accounting race which was introduced with a
recent optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does
not update the rseq CPU id so the id is the stale id of the parent
task, which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load
balancer, which does not decrease imbalance and therefore pulls
until the maximum number of loops is reached, which might be all
tasks just created by a fork bomb"
* tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
sched: Fix loadavg accounting race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master
Pull USB fixes from Greg KH:
"Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.
Nothing huge in here, just the normal collection of gadget, dwc2/3,
serial, and other minor USB driver fixes and id additions. Full
details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: iuu_phoenix: fix memory corruption
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: gadget: udc: atmel: fix uninitialized read in debug printk
usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
usb: dwc2: Fix shutdown callback in platform
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: gadget: fix langid kernel-doc warning in usbstring.c
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
usb: chipidea: core: add wakeup support for extcon
USB: serial: option: add Quectel EG95 LTE modem
thunderbolt: Fix path indices used in USB3 tunnel discovery
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
|
|
git://git.infradead.org/users/hch/dma-mapping into master
Pull dma-mapping fixes from Christoph Hellwig:
"Ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)"
* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: do not allocate pool memory from CMA
dma-pool: make sure atomic pool suits device
dma-pool: introduce dma_guess_pool()
dma-pool: get rid of dma_in_atomic_pool()
dma-direct: provide function to check physical memory area validity
|
|
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0")
solved the existing issue with the IUNIT power on code.
So, the driver can now use the right code again.
This reverts commit 95d1f398c4dc3f55e9007c89452ccc16301205fc.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because
the mask and shift operations are incorrect. Fix this by shifting
by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking
with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits
to check.
Addresses-Coverity: ("Operands don't affect result")
Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
|
|
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73a7 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
|
|
Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.
This change shuts up lots of warnings when built with W=1:
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24,
from drivers/staging/media/atomisp/pci/atomisp_compat.h:22,
from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_file.c:27:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30,
from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_acc.h:23,
from drivers/staging/media/atomisp/pci/atomisp_acc.c:29:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
After removing the unused 32-bits data, the isp2401_system_local.h
now contains everything that it is needed, either by isp2401 or
by isp2400.
So, remove code duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Right now, there are two versions of system_global.h headers.
Both share a lot of common code. There are some ISP2401 specific
types on one of the headers, but it doesn't conflict with the
ISP2400 ones.
Also, the common code is identical.
So, remove code duplication by moving such code into a
common header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There is an abstraction at the code in order to support
32 or 64 bits address/data length. However, for all
Atom chipsets supported by this version, the size is fixed.
So, cleanup the mess, removing the uused code and placing
the data sizes on a single place.
The end goal is to completely remove those local/global
headers, replacing them by some ISP-version dependent struct,
in order for the driver to decide what version it would need
in runtime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are several static vars declared inside the
system local headers. This causes lots of warnings when W=1.
Remove the unused ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If gmin_camera_platform_data() returns NULL then we should return a
negative error instead of success.
Fixes: 90ebe55ab886 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
trace_printk should not be used in production code, replace it
call with pr_info.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This patch fixes the checkpatch.pl warning:
Prefer using '"%s...", __func__' to using '<function name>',
this function's name, in a string
Signed-off-by: Baidyanath Kundu <kundubaidya99@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
I'm pretty sure I named this right, but it sounds that I ended
doing something weird maybe while solving some conflict.
So, fix the title of this config var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master
Pull SCSI fix from James Bottomley:
"One small driver fix. Although the one liner makes it sound like a
cosmetic change, it's a regression fix for the megaraid_sas driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into master
Pull hwmon fixes from Guenter Roeck:
- Using SCT on some Tohsiba drives causes firmware hangs. Disable its
use in the drivetemp driver.
- Handle potential buffer overflows in scmi and aspeed-pwm-tacho
driver.
- Energy reporting does not work well on all AMD CPUs. Restrict
amd_energy to known working models.
- Enable reading the CPU temperature on NCT6798D using undocumented
registers.
- Fix read errors seen if PEC is enabled in adm1275 driver.
- Fix setting the pwm1_enable in emc2103 driver.
* tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
hwmon: (adm1275) Make sure we are reading enough data for different chips
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
hwmon: (amd_energy) match for supported models
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- 16KiB kernel stacks on rv64, which fixes a lot of crashes.
- Rolling an mmiowb() into the scheduler, which when combined with
Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT
issues we've been seeing"
* tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
riscv: use 16KB kernel stack on 64-bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
|
|
It has been observed that Toshiba DT01ACA family drives have
WRITE FPDMA QUEUED command timeouts and sometimes just freeze until
power-cycled under heavy write loads when their temperature is getting
polled in SCT mode. The SMART mode seems to be fine, though.
Let's make sure we don't use SCT mode for these drives then.
While only the 3 TB model was actually caught exhibiting the problem let's
play safe here to avoid data corruption and extend the ban to the whole
family.
Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Notebook Pen S
Fixed no headphone sound bug on laptop Samsung Notebook Pen S
(950SBE-951SBE), by using existing patch in Linus' tree, commit
14425f1f521f (ALSA: hda/realtek: Add quirk for Samsung Notebook).
This laptop uses the same ALC298 but different subsystem id 0x144dc812.
I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c
Signed-off-by: Joonho Wohn <doomsheart@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
|
|
Fixed a coding style issue.
Signed-off-by: B K Karthik <karthik.bk2000@live.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 150 bytes.
Before:
text data bss dec hex filename
111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o
After:
text data bss dec hex filename
110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o
After:
(gcc version 9.3.0, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Compiler is not happy about leftovers:
cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs]
Drop them from Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
First of all ACPI HID is a part of the device name which is printed
as a part of the dev_info(dev, ...); line. Second, since the only BID
is left, it's a part of ACPI path, which can be printed via %pfw.
Besides that, drop ACPI handle from atomisp_get_acpi_power() parameters.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Provide Gmin subdev as parameter to gmin_subdev_add()
to avoid direct global variable usage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use temporary variable for device in gmin_subdev_add().
While here, drop unused temporary variable for device in other places.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Refactor PMIC detection to a separate function. In the future
we may move this code somewhere else where it's more suitable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Deduplicate return ret in gmin_i2c_write().
While here, replace 'Kernel' by 'kernel' in the message and
reduce amount of LOCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When we enumerate second device when PMIC has been successfully detected
to AXP, we got into troubles dereferencing NULL pointer. It seems
we have to detect PMIC only once because pmic_id is a global variable
and code doesn't expect the change of it: Two PMICs on one platform?
It's impossible.
Crash excerpt:
[ 34.335237] BUG: kernel NULL pointer dereference, address: 0000000000000002
...
[ 35.652036] RIP: 0010:gmin_subdev_add.cold+0x32f/0x33e [atomisp_gmin_platform]
So, as a quick fix make power a global variable. In next patches we move
PMIC detection to be more independent from subdevices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|