summary refs log tree commit diff
AgeCommit message (Collapse)Author
2014-12-01mtd: spi-nor: add id/id_len for flash_info{}Huang Shijie
This patch adds the id/id_len fields for flash_info{}, and rewrite the INFO to fill them. And at last, we read out 6 bytes in the spi_nor_read_id(), and we use these new fields to parse out the correct flash_info. Signed-off-by: Huang Shijie <shijie.huang@intel.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-28mtd: nand: correct the comment of function nand_block_isreserved()Gu Zheng
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-28jffs2: Drop bogus if in commentGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpyWu, Josh
There is no need to use memcpy32_toio/memcpy32_fromio to transfer data between memory and NFC sram. As the NFC sram is a also a memory space not an I/O space, we can just use memcpy(). We remove the __iomem prefix for NFC sram to avoid sparse warnings. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: cafe_nand: drop duplicate .write_page implementationBrian Norris
This write_page() function is functionally equivalent to the default in nand_base.c. Its only difference is in subpage programming support, which cafe_nand.c does not advertise, so the difference is negligible. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: m25p80: Add support for serial flash Spansion S25FL132KKnut Wohlrab
Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com> Signed-off-by: Alison Chaiken <alison_chaiken@mentor.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_idsAlison Chaiken
As stated in a5b7616c5, "mtd: m25p80,spi-nor: Fix module aliases for m25p80", m25p_ids[] in m25p80.c needs to be kept in sync with spi_nor_ids[] in spi-nor.c. The change here corrects a misalignment. (We were missing m25px80 and we had a duplicate w25q128.) Signed-off-by: Alison Chaiken <alison_chaiken@mentor.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org> # 3.18+
2014-11-25mtd: spi-nor: improve wait-till-ready timeout loopBrian Norris
There are a few small issues with the timeout loop in spi_nor_wait_till_ready(): * The first operation should not be a reschedule; we should check the status register at least once to see if we're complete! * We should check the status register one last time after declaring the deadline has passed, to prevent a premature timeout error (this is theoretically possible if we sleep for a long time after the previous status register check). * Add an error message, so it's obvious if we ever hit a timeout. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <shijie.huang@intel.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2014-11-25mtd: delete unnecessary checks before two function callsMarkus Elfring
The functions kfree() and pci_dev_put() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: nand: omap: Fix NAND enumeration on 3430 LDPRoger Quadros
3430LDP has NAND flash with 32 bytes OOB size which is sufficient to hold BCH8 codes but the small page check introduced in commit b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes") considers anything below 64 bytes unsuitable for BCH4/8/16. There is another bug in that code where it doesn't skip the check for OMAP_ECC_HAM1_CODE_SW. Get rid of that small page check code as it is insufficient and redundant because we are checking for OOB available bytes vs ecc layout before calling nand_scan_tail(). Fixes: b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: nand: add ATO manufacturer infoBrian Norris
Tested with ATO AFND1G08U3, 128MiB NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25mtd: nand: print erase size on initRafał Miłecki
It may be useful info, e.g. if someone wants to use ubinize. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-20mtd: oobtest: correct printf() format specifier for 'size_t'Brian Norris
Fixes warning: drivers/mtd/tests/oobtest.c: In function 'memcmpshow': drivers/mtd/tests/oobtest.c:129: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>
2014-11-20mtd: nand: provide detailed description for raw read/write page methodsBoris BREZILLON
read_page_raw and write_page_raw method description is not clear enough. It clearly specifies that ECC correction should not be involved but does not talk about specific layout (by layout I mean where in-band and out-of-band data are stored on the NAND media) used by NAND/ECC controllers. Those specific layouts might impact MTD users and thus should be hidden (as already done in the standard NAND_ECC_HW_SYNDROME implementation). Clearly state this constraint in the nand_ecc_ctrl struct documentation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-19mtd: mtd_oobtest: add bitflip_limit parameterRoger Quadros
It is common for NAND devices to have bitflip errors. Add a bitflip_limit parameter to specify how many bitflips per page we can tolerate without flagging an error. By default zero bitflips are tolerated. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-19mtd: mtd_oobtest: Show the verification error location and dataRoger Quadros
Add a function memcmpshow() that compares the 2 data buffers and shows the address:offset and data bytes on comparison failure. This function does not break at a comparison failure but runs the check for the whole data buffer. Use memcmpshow() instead of memcmp() for all the verification paths. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05fsl_ifc: Support all 8 IFC chip selectsAaron Sierra
Freescale's QorIQ T Series processors support 8 IFC chip selects within a memory map backward compatible with previous P Series processors which supported only 4 chip selects. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: atmel_nand: make PMECC lookup table and offset property optionalJosh Wu
If there is no PMECC lookup table stored in ROM, or lookup table offset is not specified, PMECC driver should build it in DDR by itself. That make the PMECC driver work for some board which doesn't have PMECC lookup table in ROM. The PMECC use the BCH algorithm, so based on the build_gf_tables() function in lib/bch.c, we can build the Galois Field lookup table. For more information can refer to section 5.4 of PMECC controller application note: http://www.atmel.com/images/doc11127.pdf Signed-off-by: Josh Wu <josh.wu@atmel.com> Cc: devicetree@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: mxc_nand: use __iowrite32_copy for 32 bit copyKoul, Vinod
The driver was also using own method to do 32bit copy, turns out we have a kernel API so use that instead Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: intflmount: fix off by one error in INFTL_dumpVUchains()Dan Carpenter
The ->PUtable[] array has "->nb_blocks" number of elemetns so this comparison should be ">=" instead of ">". Otherwise it could result in a minor read beyond the end of an array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: Add support for SST spi flashHarini Katakam
Add sst25wf080 to the spi-nor device id table. Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: Add support for Fujitsu MB85RS1MT FRAMRostislav Lisovy
Tested with this particular FRAM chip Signed-off-by: Rostislav Lisovy <lisovy@merica.cz> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: nand: omap: Synchronize the access to the ECC engineRostislav Lisovy
The AM335x Technical Reference Manual (spruh73j.pdf) says "Because the ECC engine includes only one accumulation context, it can be allocated to only one chip-select at a time ... " (7.1.3.3.12.3). Since the commit 97a288ba2cfa ("ARM: omap2+: gpmc-nand: Use dynamic platform_device_alloc()") gpmc-nand driver supports multiple NAND flash devices connected to the single controller. Use global 'struct nand_hw_control' among multiple NAND instances to synchronize the access to the single ECC Engine. Tested with custom AM335x board using 2x NAND flash chips. Signed-off-by: Rostislav Lisovy <lisovy@merica.cz> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: Move n25q032 entry to Micron devices listChunhe Lan
Because n25q032 is the Micron SPI chip, move it to Micron devices list group. In order that know which Micron SPI chips have been support at a glance. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Huang Shijie <shijie8@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: dataflash: Remove use of tx_dmaMark Brown
We are trying to remove the legacy tx_dma and rx_dma fields from the spi_transfer structure. Currently dataflash uses tx_dma but only to make sure that it's set to 0 so we can remove this use by replacing with a zero initialisation of the entire spi_transfer struct. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: drop replaceable wait-till-ready function pointerBrian Norris
We don't need to expose a 'wait-till-ready' interface to drivers. Status register polling should be handled by the core spi-nor.c library, and as of now, I see no need to provide a special driver-specific hook for it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: fsl-quadspi: drop wait-till-ready checksBrian Norris
spi-nor.c should be taking care of these now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Huang Shijie <b32955@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: m25p80: drop wait-till-ready checksBrian Norris
spi-nor.c should be taking care of these now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: spi-nor: move "wait-till-ready" checks into erase/write functionsBrian Norris
We shouldn't have *every* function checking if a previous write is complete; this should be done synchronously after each write/erase. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05mtd: spi-nor: handle timeout errors in spi_nor_write()Brian Norris
The error label was unused here. It looks like we're missing at least one case that should be doing 'goto write_err'. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <shijie8@gmail.com>
2014-11-05mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() codeBrian Norris
These functions were near-carbon-copies due to a small per-flash quirk. Let's add a new spi_nor::flags bitfield to support these types of quirks. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Graham Moore <grmoore@altera.com> Cc: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: update help of CONFIG_MTD_OF_PARTSMichal Sojka
The help text of CONFIG_MTD_OF_PARTS refers to additional documentation in booting-without-of.txt but this documentation was moved to another file in commit efcc2da3fd148c9acb7d7cf1d9800e0649f950fc (Stefan Roese: Factor MTD physmap bindings out of booting-without-of). This updates the help text to point to the right place. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> [Brian: fixed doc reference] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: nand: comment update, the DEPLETE1 command has goneGerhard Sittig
update a comment in nand_command_lp() about specific requirements of individual commands, the DEPLETE1 command was removed in the past and the comment no longer applied Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: spi-nor: fix the wrong dummy valueHuang Shijie
For the DDR Quad read, the dummy cycles maybe 3 or 6 which is less then 8. The dummy cycles is actually 8 for SPI fast/dual/quad read. This patch makes preparations for the DDR quad read, it fixes the wrong dummy value for both the spi-nor.c and m25p80.c. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05mtd: nand: Base BCH ECC bytes on required strengthJordan Friendshuh
NAND devices with page sizes over 4 KiB require more than 4-bits of ECC coverage. This patch calculates the value of ecc_bytes based on a still assumed 512-byte step size (13-bits) and the ecc_strength. Example: Micron M73A devices (8 KiB page) require 8-bit ECC per 512-byte Signed-off-by: Jordan Friendshuh <jfriendshuh@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-04mtd: nand: gpio: improve comments about GPIO assisted operationGerhard Sittig
The drivers/mtd/nand/gpio.c driver does not GPIO bitbang the complete NAND protocol, but instead is GPIO _assisted_ -- a memory mapped interface communicates commands and data, and only few control signals are connected to GPIO pins. Expand comments in the driver source and in the Kconfig description to better reflect the very nature of the driver. The previous text could be mistaken for complete GPIO bitbanging. Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-04devicetree: bindings: improve description for GPIO assisted NAND flashGerhard Sittig
Expand the description of the 'gpios' property in the GPIO assisted NAND flash binding, to explicitly list the required GPIO pin references and their order. Update the example section to individually bracket the GPIO references, and capitalize the signal names for improved readability. Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29MTD: merge 3.18 development into -next developmentBrian Norris
To keep the two paths in sync
2014-10-29mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chipsDmitry Eremin-Solenikov
After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29mtd: omap: fix mtd devices not showing upFrans Klaver
Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29mtd: nand: add sunxi NFC dt bindings docBoris BREZILLON
Add the sunxi NAND Flash Controller dt bindings documentation. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-29mtd: nand: add sunxi NAND flash controller supportBoris BREZILLON
Add support for the sunxi NAND Flash Controller (NFC). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: tweaked to fix ecc->steps issue] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-23nandsim: add id_bytes module parameterAkinobu Mita
nandsim can simulate NAND Flash which returns the ID bytes specified by first_id_byte, ..., fourth_id_byte module parameters. In order to simulate NAND flash which returns more than four ID bytes, this adds id_bytes module parameter which is specified by the array of byte like this: # modprobe nandsim id_bytes=0x98,0xdc,0x90,0x26,0x76,0x15,0x01,0x08 bch=1 This doesn't add fifth_id_byte, ..., seventh_id_byte module parameters, because they are redundant. But the existing first_id_byte, ..., fourth_id_byte module parameters are preserved and add "(obsolete)" to the description. Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: docg3: fix 'defined but not used' warningBrian Norris
With CONFIG_OF=n, we can see the following warning: drivers/mtd/devices/docg3.c:2122:28: warning: 'docg3_dt_ids' defined but not used [-Wunused-variable] static struct of_device_id docg3_dt_ids[] = { Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
2014-10-22mtd: bcm47xxpart: only register partitions if the trx header was filledHauke Mehrtens
Sometimes the trx offsets are 0, in that case there is no partition and we should not try to add one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [Brian: rewrapped] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: phram: fix asm/io.h include usageRob Ward
Modify phram to include <linux/io.h> rather than <asm/io.h> Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: fsl-quadspi: Let the clocks error path be clearerFabio Estevam
When clk_prepare_enable(q->clk) fails it is clearer to disable the previous acquired clock (q->clk_en) in the error path rather than doing it locally. So disable q->clk_en in the error path only. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: fsl-quadspi: Propagate the error from of_modalias_node()Fabio Estevam
The 'map_failed' label will return 'ret', so we need to assign the error code to 'ret', otherwise the probe function will return success. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: orion_nand: fix error code path in probeMichael Opdenacker
This replaces kzalloc() and ioremap() calls by devm_ functions in the probe() routine, which automatically release the corresponding resources when probe() fails or when the device is removed. This simplifies simplifies the error management code, and brings the below improvements or changes: A. Fixing a bug reported by "make coccicheck": If "board = devm_kzalloc()" fails, the probe() function jumps incorrectly to label "no_res" and therefore returns without running iounmap(). B. Requesting the memory region Using devm_ioremap_resource() makes the probe() function request the corresponding memory region before running ioremap(), as it is supposed to do. C. Standardizing the error codes: The use of devm_ioremap_resource() changes the return value: * -ENOMEM instead of -EIO in case of ioremap() failure, * -EINVAL instead of -ENODEV in case of platform_get_resource() failure. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: bcm47xxpart: alloc memory for more partitionsRafał Miłecki
This is needed for some new Netgear devices (e.g. R6250). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-04 20:34:24 +0000