summary refs log tree commit diff
AgeCommit message (Collapse)Author
2022-03-10af_key: add __GFP_ZERO flag for compose_sadb_supported in function ↵Haimin Zhang
pfkey_register Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register to initialize the buffer of supp_skb to fix a kernel-info-leak issue. 1) Function pfkey_register calls compose_sadb_supported to request a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then compose_sadb_supported treats the memory as a struct sadb_supported and begins to initialize. But it just initializes the field sadb_supported_len and field sadb_supported_exttype without field sadb_supported_reserved. Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-09Merge branch 'selftests-pmtu-sh-fix-cleanup-of-processes-launched-in-subshell'Jakub Kicinski
Guillaume Nault says: ==================== selftests: pmtu.sh: Fix cleanup of processes launched in subshell. Depending on the options used, pmtu.sh may launch tcpdump and nettest processes in the background. However it fails to clean them up after the tests complete. Patch 1 allows the cleanup() function to read the list of PIDs launched by the tests. Patch 2 fixes the way the nettest PIDs are retrieved. ==================== Link: https://lore.kernel.org/r/cover.1646776561.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09selftests: pmtu.sh: Kill nettest processes launched in subshell.Guillaume Nault
When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault
The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09NFC: port100: fix use-after-free in port100_send_completePavel Skripkin
Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670 Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-03-09 1) Fix IPv6 PMTU discovery for xfrm interfaces. From Lina Wang. 2) Revert failing for policies and states that are configured with XFRMA_IF_ID 0. It broke a user configuration. From Kai Lueke. 3) Fix a possible buffer overflow in the ESP output path. 4) Fix ESP GSO for tunnel and BEET mode on inter address family tunnels. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09ax25: Fix NULL pointer dereference in ax25_kill_by_deviceDuoming Zhou
When two ax25 devices attempted to establish connection, the requester use ax25_create(), ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding fail log is shown below: =============================================================== BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290 Call Trace: ... ax25_device_event+0xfd/0x290 raw_notifier_call_chain+0x5e/0x70 dev_close_many+0x174/0x220 unregister_netdevice_many+0x1f7/0xa60 unregister_netdevice_queue+0x12f/0x170 unregister_netdev+0x13/0x20 mkiss_close+0xcd/0x140 tty_ldisc_release+0xc0/0x220 tty_release_struct+0x17/0xa0 tty_release+0x62d/0x670 ... This patch add condition check in ax25_kill_by_device(). If s->sk is NULL, it will goto if branch to kill device. Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs") Reported-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: marvell: prestera: Add missing of_node_put() in ↵Miaoqian Lin
prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: ethernet: lpc_eth: Handle error for clk_enableJiasheng Jiang
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net:mcf8390: Use platform_get_irq() to get the interruptMinghao Chi (CGEL ZTE)
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: ethernet: ti: cpts: Handle error for clk_enableJiasheng Jiang
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-03-08 This series contains updates to iavf, i40e, and ice drivers. Michal ensures netdev features are properly updated to reflect VLAN changes received from PF and adds an additional flag for MSI-X reinitialization as further differentiation of reinitialization operations is needed for iavf. Jake stops disabling of VFs due to failed virtchannel responses for i40e and ice driver. Dave moves MTU event notification to the service task to prevent issues with RTNL lock for ice. Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of GFP_KERNEL for ice. Jedrzej fixes the value for link speed comparison which was preventing the requested value from being set for ice. --- Note: This will conflict when merging with net-next. Resolution: diff --cc drivers/net/ethernet/intel/ice/ice.h index dc42ff92dbad,3121f9b04f59..000000000000 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags ICE_FLAG_LEGACY_RX, ICE_FLAG_VF_TRUE_PROMISC_ENA, ICE_FLAG_MDD_AUTO_RESET_VF, + ICE_FLAG_VF_VLAN_PRUNING, ICE_FLAG_LINK_LENIENT_MODE_ENA, ICE_FLAG_PLUG_AUX_DEV, + ICE_FLAG_MTU_CHANGED, + ICE_FLAG_GNSS, /* GNSS successfully initialized */ ICE_PF_FLAGS_NBITS /* must be last */ }; ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08tipc: fix incorrect order of state message data sanity checkTung Nguyen
When receiving a state message, function tipc_link_validate_msg() is called to validate its header portion. Then, its data portion is validated before it can be accessed correctly. However, current data sanity check is done after the message header is accessed to update some link variables. This commit fixes this issue by moving the data sanity check to the beginning of state message handling and right after the header sanity check. Fixes: 9aa422ad3266 ("tipc: improve size validations for received domain records") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-08ethernet: Fix error handling in xemaclite_of_probeMiaoqian Lin
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-08ice: Fix curr_link_speed advertised speedJedrzej Jagielski
Change curr_link_speed advertised speed, due to link_info.link_speed is not equal phy.curr_user_speed_req. Without this patch it is impossible to set advertised speed to same as link_speed. Testing Hints: Try to set advertised speed to 25G only with 25G default link (use ethtool -s 0x80000000) Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08ice: Don't use GFP_KERNEL in atomic contextChristophe JAILLET
ice_misc_intr() is an irq handler. It should not sleep. Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08ice: Fix error with handling of bonding MTUDave Ertman
When a bonded interface is destroyed, .ndo_change_mtu can be called during the tear-down process while the RTNL lock is held. This is a problem since the auxiliary driver linked to the LAN driver needs to be notified of the MTU change, and this requires grabbing a device_lock on the auxiliary_device's dev. Currently this is being attempted in the same execution context as the call to .ndo_change_mtu which is causing a dead-lock. Move the notification of the changed MTU to a separate execution context (watchdog service task) and eliminate the "before" notification. Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08ice: stop disabling VFs due to PF error responsesJacob Keller
The ice_vc_send_msg_to_vf function has logic to detect "failure" responses being sent to a VF. If a VF is sent more than ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled. Almost identical logic also existed in the i40e driver. This logic was added to the ice driver in commit 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") which itself copied from the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). Neither commit provides a proper explanation or justification of the check. In fact, later commits to i40e changed the logic to allow bypassing the check in some specific instances. The "logic" for this seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lack of resources, etc. Additionally, this causes the PF to log an info message for every failed VF response which may confuse users, and can spam the kernel log. This behavior is not documented as part of any requirement for our products and other operating system drivers such as the FreeBSD implementation of our drivers do not include this type of check. In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1 ("i40e: Lower some message levels") explains that these messages typically don't actually indicate a real issue. It is quite likely that a user who hits this in practice will be very confused as the VF will be disabled without an obvious way to recover. We already have robust malicious driver detection logic using actual hardware detection mechanisms that detect and prevent invalid device usage. Remove the logic since its not a documented requirement and the behavior is not intuitive. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08i40e: stop disabling VFs due to PF error responsesJacob Keller
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08iavf: Fix adopting new combined settingMichal Maloszewski
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED which should indicate that interrupts need to be completely reinitialized during reset leads to RTNL deadlocks using ethtool -C while a reset is in progress. To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED used to trigger MSI-X reinit. New combined setting is fixed adopt after VF reset. This has been implemented by call reinit interrupt scheme during VF reset. Without this fix new combined setting has never been adopted. Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08iavf: Fix handling of vlan strip virtual channel messagesMichal Maloszewski
Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()Russell King (Oracle)
Discussing one of the tests in mt753x_phylink_validate() with Landen Chao confirms that the "||" should be "&&". Fix this. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-07smsc95xx: Ignore -ENODEV errors when device is unpluggedFabio Estevam
According to Documentation/driver-api/usb/URB.rst when a device is unplugged usb_submit_urb() returns -ENODEV. This error code propagates all the way up to usbnet_read_cmd() and usbnet_write_cmd() calls inside the smsc95xx.c driver during Ethernet cable unplug, unbind or reboot. This causes the following errors to be shown on reboot, for example: ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and __smsc95xx_phy_wait_not_busy() and do not print error messages when -ENODEV is returned. Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07qed: return status of qed_iov_get_linkTom Rix
Clang static analysis reports this issue qed_sriov.c:4727:19: warning: Assigned value is garbage or undefined ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ link is only sometimes set by the call to qed_iov_get_link() qed_iov_get_link fails without setting link or returning status. So change the decl to return status. Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: Fix esp GSO on inter address family tunnels.Steffen Klassert
The esp tunnel GSO handlers use skb_mac_gso_segment to push the inner packet to the segmentation handlers. However, skb_mac_gso_segment takes the Ethernet Protocol ID from 'skb->protocol' which is wrong for inter address family tunnels. We fix this by introducing a new skb_eth_gso_segment function. This function can be used if it is necessary to pass the Ethernet Protocol ID directly to the segmentation handler. First users of this function will be the esp4 and esp6 tunnel segmentation handlers. Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-07esp: Fix BEET mode inter address family tunneling on GSOSteffen Klassert
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family tunneling case. Fix this by setting these gso types. Fixes: 384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode") Fixes: 7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-07esp: Fix possible buffer overflow in ESP transformationSteffen Klassert
The maximum message size that can be send is bigger than the maximum site that skb_page_frag_refill can allocate. So it is possible to write beyond the allocated buffer. Fix this by doing a fallback to COW in that case. v2: Avoid get get_order() costs as suggested by Linus Torvalds. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Reported-by: valis <sec@valis.email> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-07ethernet: sun: Free the coherent when failing in probingZheyu Ma
When the driver fails to register net device, it should free the DMA region first, and then do other cleanup. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: lantiq_xrx200: fix use after free bugAleksander Jan Bajkowski
The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Fixes: c3e6b2c35b34 ("net: lantiq_xrx200: add ingress SG DMA support") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07net: qlogic: check the return value of dma_alloc_coherent() in ↵Jia-Ju Bai
qed_vf_hw_prepare() The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so its return value should be checked. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-07isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()Jia-Ju Bai
The function dma_set_mask() in setup_hw() can fail, so its return value should be checked. Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: dsa: unlock the rtnl_mutex when dsa_master_setup() failsVladimir Oltean
After the blamed commit, dsa_tree_setup_master() may exit without calling rtnl_unlock(), fix that. Fixes: c146f9bc195a ("net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"Kai Lueke
This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID 0 was meant to be used for configuring the policy/state without matching for a specific interface (e.g., Cilium is affected, see https://github.com/cilium/cilium/pull/18789 and https://github.com/cilium/cilium/pull/19019). Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-05mISDN: Fix memory leak in dsp_pipeline_build()Alexey Khoroshilov
dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 960366cf8dbb ("Add mISDN DSP") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: meson-gxl: fix interrupt handling in forced modeHeiner Kallweit
This PHY doesn't support a link-up interrupt source. If aneg is enabled we use the "aneg complete" interrupt for this purpose, but if aneg is disabled link-up isn't signaled currently. According to a vendor driver there's an additional "energy detect" interrupt source that can be used to signal link-up if aneg is disabled. We can safely ignore this interrupt source if aneg is enabled. This patch was tested on a TX3 Mini TV box with S905W (even though boot message says it's a S905D). This issue has been existing longer, but due to changes in phylib and the driver the patch applies only from the commit marked as fixed. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04tipc: fix kernel panic when enabling bearerTung Nguyen
When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages. Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework") Reported-by: Shuang Li <shuali@redhat.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: macb: Fix lost RX packet wakeup race in NAPI receiveRobert Hancock
There is an oddity in the way the RSR register flags propagate to the ISR register (and the actual interrupt output) on this hardware: it appears that RSR register bits only result in ISR being asserted if the interrupt was actually enabled at the time, so enabling interrupts with RSR bits already set doesn't trigger an interrupt to be raised. There was already a partial fix for this race in the macb_poll function where it checked for RSR bits being set and re-triggered NAPI receive. However, there was a still a race window between checking RSR and actually enabling interrupts, where a lost wakeup could happen. It's necessary to check again after enabling interrupts to see if RSR was set just prior to the interrupt being enabled, and re-trigger receive in that case. This issue was noticed in a point-to-point UDP request-response protocol which periodically saw timeouts or abnormally high response times due to received packets not being processed in a timely fashion. In many applications, more packets arriving, including TCP retransmissions, would cause the original packet to be processed, thus masking the issue. Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done") Cc: stable@vger.kernel.org Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com> Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03Merge tag 'for-net-2022-03-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with processing of MGMT commands - Fix unbalanced unlock in Set Device Flags * tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags() ==================== Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03Merge tag 'net-5.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from can, xfrm, wifi, bluetooth, and netfilter. Lots of various size fixes, the length of the tag speaks for itself. Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees which had been lagging as you pointed out previously. But there's also a larger than we'd like portion of fixes for bugs from previous releases. Three more fixes still under discussion, including and xfrm revert for uAPI error. Current release - regressions: - iwlwifi: don't advertise TWT support, prevent FW crash - xfrm: fix the if_id check in changelink - xen/netfront: destroy queues before real_num_tx_queues is zeroed - bluetooth: fix not checking MGMT cmd pending queue, make scanning work again Current release - new code bugs: - mptcp: make SIOCOUTQ accurate for fallback socket - bluetooth: access skb->len after null check - bluetooth: hci_sync: fix not using conn_timeout - smc: fix cleanup when register ULP fails - dsa: restore error path of dsa_tree_change_tag_proto - iwlwifi: fix build error for IWLMEI - iwlwifi: mvm: propagate error from request_ownership to the user Previous releases - regressions: - xfrm: fix pMTU regression when reported pMTU is too small - xfrm: fix TCP MSS calculation when pMTU is close to 1280 - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks - ipv6: prevent leaks in igmp6 when input queues get full - fix up skbs delta_truesize in UDP GRO frag_list - eth: e1000e: fix possible HW unit hang after an s0ix exit - eth: e1000e: correct NVM checksum verification flow - ptp: ocp: fix large time adjustments Previous releases - always broken: - tcp: make tcp_read_sock() more robust in presence of urgent data - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate - xfrm: fix xfrm_migrate issues when address family changes - dcb: flush lingering app table entries for unregistered devices - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error - mac80211: fix EAPoL rekey fail in 802.3 rx path - mac80211: fix forwarded mesh frames AC & queue selection - netfilter: nf_queue: fix socket access races and bugs - batman-adv: fix ToCToU iflink problems and check the result belongs to the expected net namespace - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting - can: rcar_canfd: register the CAN device when fully ready - eth: igb, igc: phy: drop premature return leaking HW semaphore - eth: ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc(), prevent live lock when link goes down - eth: stmmac: only enable DMA interrupts when ready - eth: sparx5: move vlan checks before any changes are made - eth: iavf: fix races around init, removal, resets and vlan ops - ibmvnic: more reset flow fixes Misc: - eth: fix return value of __setup handlers" * tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report() net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc() selftests: mlxsw: resource_scale: Fix return value selftests: mlxsw: tc_police_scale: Make test more robust net: dcb: disable softirqs in dcbnl_flush_dev() bnx2: Fix an error message sfc: extend the locking on mcdi->seqno net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() tcp: make tcp_read_sock() more robust bpf, sockmap: Do not ignore orig_len parameter net: ipa: add an interconnect dependency net: fix up skbs delta_truesize in UDP GRO frag_list iwlwifi: mvm: return value for request_ownership nl80211: Update bss channel on channel switch for P2P_CLIENT iwlwifi: fix build error for IWLMEI ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments batman-adv: Don't expect inter-netns unique iflink indices ...
2022-03-03Merge tag 'mips-fixes-5.17_4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fix memory detection for MT7621 devices - Fix setnocoherentio kernel option - Fix warning when CONFIG_SCHED_CORE is enabled * tag 'mips-fixes-5.17_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: ralink: mt7621: use bitwise NOT instead of logical mips: setup: fix setnocoherentio() boolean setting MIPS: smp: fill in sibling and core maps earlier MIPS: ralink: mt7621: do memory detection on KSEG1
2022-03-03Merge tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay fixes from Miguel Ojeda: "A few lcd2s fixes from Andy Shevchenko" * tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux: auxdisplay: lcd2s: Use proper API to free the instance of charlcd object auxdisplay: lcd2s: Fix memory leak in ->remove() auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature
2022-03-03ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()Eric Dumazet
While investigating on why a synchronize_net() has been added recently in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report() might drop skbs in some cases. Discussion about removing synchronize_net() from ipv6_mc_down() will happen in a different thread. Fixes: f185de28d9ae ("mld: add new workqueues for process mld events") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto changeVladimir Oltean
The blamed commit said one thing but did another. It explains that we should restore the "return err" to the original "goto out_unwind_tagger", but instead it replaced it with "goto out_unlock". When DSA_NOTIFIER_TAG_PROTO fails after the first switch of a multi-switch tree, the switches would end up not using the same tagging protocol. Fixes: 0b0e2ff10356 ("net: dsa: restore error path of dsa_tree_change_tag_proto") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220303154249.1854436-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()Maciej Fijalkowski
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") addressed the ring transient state when MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the interface to through down/up. Maurice reported that when carrier is not ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU cycles due to the constant NAPI rescheduling as ixgbe_poll() states that there is still some work to be done. To fix this, do not set work_done to false for a !netif_carrier_ok(). Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") Reported-by: Maurice Baijens <maurice.baijens@ellips.com> Tested-by: Maurice Baijens <maurice.baijens@ellips.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03Merge branch 'selftests-mlxsw-a-couple-of-fixes'Jakub Kicinski
Ido Schimmel says: ==================== selftests: mlxsw: A couple of fixes Patch #1 fixes a breakage due to a change in iproute2 output. The real problem is not iproute2, but the fact that the check was not strict enough. Fixed by using JSON output instead. Targeting at net so that the test will pass as part of old and new kernels regardless of iproute2 version. Patch #2 fixes an issue uncovered by the first one. ==================== Link: https://lore.kernel.org/r/20220302161447.217447-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03selftests: mlxsw: resource_scale: Fix return valueAmit Cohen
The test runs several test cases and is supposed to return an error in case at least one of them failed. Currently, the check of the return value of each test case is in the wrong place, which can result in the wrong return value. For example: # TESTS='tc_police' ./resource_scale.sh TEST: 'tc_police' [default] 968 [FAIL] tc police offload count failed Error: mlxsw_spectrum: Failed to allocate policer index. We have an error talking to the kernel Command failed /tmp/tmp.i7Oc5HwmXY:969 TEST: 'tc_police' [default] overflow 969 [ OK ] ... TEST: 'tc_police' [ipv4_max] overflow 969 [ OK ] $ echo $? 0 Fix this by moving the check to be done after each test case. Fixes: 059b18e21c63 ("selftests: mlxsw: Return correct error code in resource scale test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03selftests: mlxsw: tc_police_scale: Make test more robustAmit Cohen
The test adds tc filters and checks how many of them were offloaded by grepping for 'in_hw'. iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control action offload") added offload indication to tc actions, producing the following output: $ tc filter show dev swp2 ingress ... filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0 eth_type ipv6 dst_ip 2001:db8:1::7bf skip_sw in_hw in_hw_count 1 action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b ref 1 bind 1 not_in_hw used_hw_stats immediate The current grep expression matches on both 'in_hw' and 'not_in_hw', resulting in incorrect results. Fix that by using JSON output instead. Fixes: 5061e773264b ("selftests: mlxsw: Add scale test for tc-police") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03net: dcb: disable softirqs in dcbnl_flush_dev()Vladimir Oltean
Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable software interrupts before taking dcb_lock"), the DCB API can be called by drivers from softirq context. One such in-tree example is the chelsio cxgb4 driver: dcb_rpl -> cxgb4_dcb_handle_fw_update -> dcb_ieee_setapp If the firmware for this driver happened to send an event which resulted in a call to dcb_ieee_setapp() at the exact same time as another DCB-enabled interface was unregistering on the same CPU, the softirq would deadlock, because the interrupted process was already holding the dcb_lock in dcbnl_flush_dev(). Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as in the rest of the dcbnl code. Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03bnx2: Fix an error messageChristophe JAILLET
Fix an error message and report the correct failing function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03sfc: extend the locking on mcdi->seqnoNiels Dossche
seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-14 00:29:52 +0000