summary refs log tree commit diff
AgeCommit message (Collapse)Author
2011-03-03ixgbe: Numerous whitespace / formatting cleanupsEmil Tantilov
This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Specific check for 100 Full link speedEmil Tantilov
This patch specifically checks for 100 Full link speed instead of assuming we are linked at 100 if not linked at 10G and 1G. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Drop unused code for setting up unicast addressesEmil Tantilov
This change removes the unused code that was setting up the uc_addr_list. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: rework ixgbe MTA handling to not drop packetsEmil Tantilov
This change modifies the ixgbe drivers so that it will not drop the multicast filters while updating them. Instead it uses an intermediate table to store the filter and then writes that filter to the hardware. Based on original patch from Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Dave Boutcher <daveboutcher@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup X540 PHY reset function pointerDon Skidmore
The X540 PHY reset pointer isn't currently used which is a good thing as it wouldn't work as implemented. On top of that the X540 firmware is written with the assumption that is does not need to be reset for proper initialization so it's not needed. I'm just assigning the pointer at NULL as the current implementation is rather misleading. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Bounds checking for set_rar, clear_rar, set_vmdq, clear_vmdqEmil Tantilov
This change makes it so that out of bounds requests to these calls will now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Fill out PCIe speed and width enums with valuesEmil Tantilov
This patch fills in the values for bus speed and width of the ixgbe_bus_speed and ixgbe_bus_width enums. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: add polling test to end of PHY resetEmil Tantilov
Some PHYs require that we poll the reset bit and wait for it to clear before continuing initialization. As such we should add this check to the end of the ixgbe_reset_phy_generic routine. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Check link wants report current link stateEmil Tantilov
Currently check link reports the link state as down, if at any time the link had previously gone down since the last time the LINKS register was read. This does not accurately reflect the function of the check link call, which should be to return the CURRENT link state. Code now reads the LINKS registers twice, once to clear the previous and again to get the current value. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup code in ixgbe_identify_sfp_module_genericEmil Tantilov
This change cleans up several issues in ixgbe_identify_sfp_module_generic including whitespace, redundant code, I2C EEPROM reads without exception handling, and an if/elseif/else without braces. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Add ability to double reset on failure to clear master enableEmil Tantilov
Double resets are required for recovery from certain error conditions. Between resets, it is necessary to stall to allow time for any pending HW events to complete. We use 1usec since that is what is needed for ixgbe_disable_pcie_master(). The second reset then clears out any effects of those events. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: set media type for 82599 T3 LOMEmil Tantilov
The media type was not being set for the 82599 T3 LAN on motherboard. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: balance free_irq calls with request_irq callsAlexander Duyck
We were incorrectly freeing IRQs that we had not requested. This change corrects that by making certain we only free q_vectors that we have requested IRQs for. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup logic related to HW semaphoresEmil Tantilov
This change cleans up much of the logic related to the hardware semaphores on the adapters. There were a number of issues with timings that needed to be addressed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup wake on LAN definesEmil Tantilov
This change just cleans up a few defines in ixgbe_type.h related to wake on LAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbevf: Fix Compiler WarningsGreg Rose
Fix Compiler warnings of variables that are initialized but not used. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix strncpy calls to be safe per source code review toolsCarolyn Wyborny
This fix changes the remaining calls to strncpy that have not yet been changed to use the "sizeof(buf) - 1" syntax rather than just a number for buffer size. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix reg pattern test in ethtool for i350 devicesCarolyn Wyborny
This fixes the reg_pattern_test so that the test does not fail on i350 parts. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: warn if max_vfs limit is exceededStefan Assmann
Currently there's no warning printed when max_vfs > 7 is specified with igb and the maximum of 7 is silently enforced. This patch prints a warning and informs the user of the actions taken. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-02dcbnl: add support for retrieving peer configuration - ceeShmulik Ravid
This patch adds the support for retrieving the remote or peer DCBX configuration via dcbnl for embedded DCBX stacks supporting the CEE DCBX standard. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02dcbnl: add support for retrieving peer configuration - ieeeShmulik Ravid
These 2 patches add the support for retrieving the remote or peer DCBX configuration via dcbnl for embedded DCBX stacks. The peer configuration is part of the DCBX MIB and is useful for debugging and diagnostics of the overall DCB configuration. The first patch add this support for IEEE 802.1Qaz standard the second patch add the same support for the older CEE standard. Diff for v2 - the peer-app-info is CEE specific. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02netdevice: make initial group visible to userspaceVlad Dogaru
INIT_NETDEV_GROUP is needed by userspace, move it outside __KERNEL__ guards. Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02ipv4: ip_route_output_key() is better as an inline.David S. Miller
This avoid a stack frame at zero cost. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02ipv4: Make output route lookup return rtable directly.David S. Miller
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02xfrm: Return dst directly from xfrm_lookup()David S. Miller
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2011-03-01inet: Replace left-over references to inet->corkHerbert Xu
The patch to replace inet->cork with cork left out two spots in __ip_append_data that can result in bogus packet construction. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01pfkey: fix warningStephen Hemminger
If CONFIG_NET_KEY_MIGRATE is not defined the arguments of pfkey_migrate stub do not match causing warning. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv6: Make icmp route lookup code a bit clearer.David S. Miller
The route lookup code in icmpv6_send() is slightly tricky as a result of having to handle all of the requirements of RFC 4301 host relookups. Pull the route resolution into a seperate function, so that the error handling and route reference counting is hopefully easier to see and contained wholly within this new routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Make icmp route lookup code a bit clearer.David S. Miller
The route lookup code in icmp_send() is slightly tricky as a result of having to handle all of the requirements of RFC 4301 host relookups. Pull the route resolution into a seperate function, so that the error handling and route reference counting is hopefully easier to see and contained wholly within this new routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01xfrm: Handle blackhole route creation via afinfo.David S. Miller
That way we don't have to potentially do this in every xfrm_lookup() caller. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv6: Normalize arguments to ip6_dst_blackhole().David S. Miller
Return a dst pointer which is potentitally error encoded. Don't pass original dst pointer by reference, pass a struct net instead of a socket, and elide the flow argument since it is unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01xfrm: Kill XFRM_LOOKUP_WAIT flag.David S. Miller
This can be determined from the flow flags instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv6: Change final dst lookup arg name to "can_sleep"David S. Miller
Since it indicates whether we are invoked from a sleepable context or not. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Kill can_sleep arg to ip_route_output_flow()David S. Miller
This boolean state is now available in the flow flags. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01net: Add FLOWI_FLAG_CAN_SLEEP.David S. Miller
And set is in contexts where the route resolution can sleep. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Make final arg to ip_route_output_flow to be boolean "can_sleep"David S. Miller
Since that is what the current vague "flags" argument means. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Can final ip_route_connect() arg to boolean "can_sleep".David S. Miller
Since that's what the current vague "flags" thing means. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv6: Consolidate route lookup sequences.David S. Miller
Route lookups follow a general pattern in the ipv6 code wherein we first find the non-IPSEC route, potentially override the flow destination address due to ipv6 options settings, and then finally make an IPSEC search using either xfrm_lookup() or __xfrm_lookup(). __xfrm_lookup() is used when we want to generate a blackhole route if the key manager needs to resolve the IPSEC rules (in this case -EREMOTE is returned and the original 'dst' is left unchanged). Otherwise plain xfrm_lookup() is used and when asynchronous IPSEC resolution is necessary, we simply fail the lookup completely. All of these cases are encapsulated into two routines, ip6_dst_lookup_flow and ip6_sk_dst_lookup_flow. The latter of which handles unconnected UDP datagram sockets. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01udp: Add lockless transmit pathHerbert Xu
The UDP transmit path has been running under the socket lock for a long time because of the corking feature. This means that transmitting to the same socket in multiple threads does not scale at all. However, as most users don't actually use corking, the locking can be removed in the common case. This patch creates a lockless fast path where corking is not used. Please note that this does create a slight inaccuracy in the enforcement of socket send buffer limits. In particular, we may exceed the socket limit by up to (number of CPUs) * (packet size) because of the way the limit is computed. As the primary purpose of socket buffers is to indicate congestion, this should not be a great problem for now. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01udp: Switch to ip_finish_skbHerbert Xu
This patch converts UDP to use the new ip_finish_skb API. This would then allows us to more easily use ip_make_skb which allows UDP to run without a socket lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01inet: Add ip_make_skb and ip_finish_skbHerbert Xu
This patch adds the helper ip_make_skb which is like ip_append_data and ip_push_pending_frames all rolled into one, except that it does not send the skb produced. The sending part is carried out by ip_send_skb, which the transport protocol can call after it has tweaked the skb. It is meant to be called in cases where corking is not used should have a one-to-one correspondence to sendmsg. This patch also adds the helper ip_finish_skb which is meant to be replace ip_push_pending_frames when corking is required. Previously the protocol stack would peek at the socket write queue and add its header to the first packet. With ip_finish_skb, the protocol stack can directly operate on the final skb instead, just like the non-corking case with ip_make_skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01inet: Remove explicit write references to sk/inet in ip_append_dataHerbert Xu
In order to allow simultaneous calls to ip_append_data on the same socket, it must not modify any shared state in sk or inet (other than those that are designed to allow that such as atomic counters). This patch abstracts out write references to sk and inet_sk in ip_append_data and its friends so that we may use the underlying code in parallel. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01inet: Remove unused sk_sndmsg_* from UFOHerbert Xu
UFO doesn't really use the sk_sndmsg_* parameters so touching them is pointless. It can't use them anyway since the whole point of UFO is to use the original pages without copying. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-02-28sfc: Bump version to 3.1Ben Hutchings
All features originally planned for version 3.1 (and some that weren't) have been implemented. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Remove configurable FIFO thresholds for pause frame generationBen Hutchings
In Falcon we can configure the fill levels of the RX data FIFO which trigger the generation of pause frames (if enabled), and we have module parameters for this. Siena does not allow the levels to be configured (or, if it does, this is done by the MC firmware and is not configurable by drivers). So far as I can tell, the module parameters are not used by our internal scripts and have not been documented (with the exception of the short parameter descriptions). Therefore, remove them and always initialise Falcon with the default values. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Expose TX push and TSO counters through ethtool statisticsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Update copyright datesBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Do not read STAT1.FAULT in efx_mdio_check_mmd()Ben Hutchings
This field does not exist in all MMDs we want to check, and all callers allow it to be set (fault_fatal = 0). Remove the loopback condition, as STAT2.DEVPRST should be valid regardless of any fault. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-05 13:13:28 +0000