summary refs log tree commit diff
AgeCommit message (Collapse)Author
2012-10-08ALSA: hda - Remove dead GPIO code for VIA codecDavid Henningsson
From what I can conclude all GPIO handling was removed in 2009. Remove dead code remnants. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-08ALSA: usb-audio: Add TASCAM US122 MKII playbackOto Petřík
Added quirk to provide at least playback-only support. Signed-off-by: Oto Petrik <oto.petrik@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - Add new codec ALC283 ALC290 supportKailang Yang
These are compatible with standard ALC269 parser. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - avoid unneccesary indices on "Headphone Jack" controlsDavid Henningsson
In case there is one "Headphone Jack" and one "Dock Headphone Jack", one of them will get an index, even though that is not needed. This patch fixes that issue. BugLink: https://bugs.launchpad.net/bugs/1060729 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - fix indices on boost volume on ConexantDavid Henningsson
After the recent patch "ALSA: hda - use both input paths on Conexant auto parser" suddenly we can have more than one "Mic Boost", this happened on Acer Aspire One 722. Therefore we must add the possibility to put an index on this "Mic Boost" just as we do for the other "Mic Boost" earlier in the same function. BugLink: https://bugs.launchpad.net/bugs/1059523 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: aloop - add locking to timer accessOmair Mohammed Abdullah
When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic. Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this. Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - Fix hang caused by race during suspend.Dylan Reid
There was a race condition when the system suspends while hda_power_work is running in the work queue. If system suspend (snd_hda_suspend) happens after the work queue releases power_lock but before it calls hda_call_codec_suspend, codec_suspend runs with power_on=0, causing the codec to power up for register reads, and hanging when it calls cancel_delayed_work_sync from the running work queue. The call chain from the work queue will look like this: hda_power_work <<- power_on = 1, unlock, then power_on cleard by suspend hda_call_codec_suspend hda_set_power_state snd_hda_codec_read codec_exec_verb snd_hda_power_up snd_hda_power_save __snd_hda_power_up cancel_delayed_work_sync <<-- cancelling executing wq Fix this by waiting for the work queue to finish before starting suspend if suspend is not happening on the work queue. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06sound: Remove unnecessary semicolonPeter Senna Tschudin
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda/realtek - Fix detection of ALC271X codecHerton Ronaldo Krzesinski
In commit af741c1 ("ALSA: hda/realtek - Call alc_auto_parse_customize_define() always after fixup"), alc_auto_parse_customize_define was moved after detection of ALC271X. The problem is that detection of ALC271X relies on spec->cdefine.platform_type, and it's set on alc_auto_parse_customize_define. Move the alc_auto_parse_customize_define and its required fixup setup before the block doing the ALC271X and other codec setup. BugLink: https://bugs.launchpad.net/bugs/1006690 Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Reviewed-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310Felix Kaechele
The Lenovo IdeaPad U310 has an internal mic where the right channel is phase inverted. Signed-off-by: Felix Kaechele <felix@fetzig.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol eventDavid Henningsson
For less duplication of code between codecs, and to make it easier in the future to improve code for all codecs simultaneously. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06ALSA: hda - make a generic unsol event handlerDavid Henningsson
Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06Merge tag 'asoc-3.7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Additional updates for v3.7 A couple more updates for 3.7, enhancements to the ux500 and wm2000 drivers, a new driver for DA9055 and the support for regulator bypass mode. With the exception of the DA9055 this has all had a chance to soak in -next (the driver was added on Friday so should be in -next today).
2012-09-28ASoC: codecs: Add DA9055 codec driverAshish Chavan
This patch adds support for Dialog semiconductor's DA9055 audio codec. This has been tested on DA9055 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: eukrea-tlv320: Convert it to platform driverFabio Estevam
Convert eukrea-tlv320 to platform driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ALSA: ASoC: add DT bindings for CS4271Daniel Mack
Apart from pure matching, the bindings also support setting the the reset gpio line. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: wm_hubs: Ensure volume updates are handled during class W startupMark Brown
In some circumstances we may need to flush volume updates to the device after switching to class W mode. Do this unconditionally to ensure that these situations are handled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-27ASoC: wm5110: Adding missing volume update bitsCharles Keepax
The volume update bits were being set on all but one input and one output. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-26ASoC: wm5110: Add OUT3R supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Add AEC loopback supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Rename EPOUT to HPOUT3Mark Brown
The third output on WM5110 is a general purpose headphone output which can be used to drive an earpice rather than a dedicated earpiece driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more clock ratesMark Brown
Some devices support additional clock rates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more DSP options for mixer input muxesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Initialise chip state before we register the interruptMark Brown
The interrupt handler uses the chip state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Don't check if reset GPIO is defined when removingMark Brown
We will fail to probe without one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Allow slow GPIO for resetMark Brown
We never set the GPIO from atomic context so there's no reason why we can't support a GPIO that needs to sleep when configuring. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Enable bypass mode for MICVDDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5102: Enable bypass mode for MICVDDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26Merge tag 'bypass' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into for-3.7 regulator: Bypass mode support Allow regulators to be put into a non-regulating mode bypassing the input straight to the output, mostly used by low power retention modes.
2012-09-25ASoC: cs4270: Remove mono supportFabio Estevam
According to cs4270 datasheet, there is no reference to mono mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-24ARM: SAMSUNG: dma-ops: Fix dmaengine_prep_dma_cyclic() parameter listPeter Ujfalusi
There is a new flags parameter for the function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-24dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()Peter Ujfalusi
With this parameter added to dmaengine_prep_dma_cyclic() the API will be in sync with other dmaengine_prep_*() functions. The dmaengine_prep_dma_cyclic() function primarily used by audio for cyclic transfer required by ALSA, we use the from audio to ask dma drivers to suppress interrupts (if DMA_PREP_INTERRUPT is cleared) when it is supported on the platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-23ALSA: Make snd_sgbuf_get_{ptr|addr}() available for non-SG casesTakashi Iwai
Passing struct snd_dma_buffer pointer instead, so that they work no matter whether real SG buffer is used or not. This is a preliminary work for the HD-audio DSP loader code. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-22Merge remote-tracking branch 'asoc/topic/ux500' into for-3.7Mark Brown
2012-09-22ASoC: wm2000: Add regulator supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: wm2000: Convert to devm_regmap_init_i2c()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Merge tag 'asoc-3.7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.7 Lots and lots of driver specific cleanups and enhancements but the only substantial framework feature this time round is the compressed API binding: - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for CODEC drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010.
2012-09-22Merge tag 'v3.6-rc6' into for-3.7Mark Brown
Linux 3.6-rc6 has all our bug fixes. Conflicts (trivial overlap): sound/soc/omap/am3517evm.c
2012-09-22ASoC: twl4030: Support for DT booted kernelPeter Ujfalusi
When the kernel has been booted with DT blob the platform data is NULL for the driver. We need to construct the pdata based on the DT information for runtime use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Add pointer to pdata within the private dataPeter Ujfalusi
Access the pdata via a pointer within the twl4030_priv structure. In preparation for DeviceTree support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Convert to use devm_kzallocPeter Ujfalusi
Allocate the private data with devm_kzalloc. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC/mfd: twl4030: Remove set_hs_extmute callback from platform dataPeter Ujfalusi
We no longer have users for the set_hs_extmute callback which has been replaced by hs_extmute_gpio so the codec driver can handle the external mute if it is needed by the board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIOPeter Ujfalusi
Remove the use of set_hs_extmute callback and let the codec driver to handle the extmute GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Move hs_extmute GPIO handling to driverPeter Ujfalusi
The external mute (if it is in use) is handled by a GPIO line. Prepare to remove the set_hs_extmute callback and replace it with: hs_extmute_gpio: the GPIO number to use for external mute When the users of set_hs_extmute has been converted the callback can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Input: twl4030-vibra: Support for DT booted kernelPeter Ujfalusi
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Add DT supportPeter Ujfalusi
Support for loading the twl4030 audio module via devicetree. Sub devices for codec and vibra will be created as mfd devices once the core MFD driver is loaded when the kernel is booted with a DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dt: Add empty of_find_node_by_name() functionPeter Ujfalusi
This commit adds an empty of_find_node_by_name() function for !CONFIG_OF builds. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdataPeter Ujfalusi
twl-core has API to get the boot time configured HFCLK rate which has the same rate as the audio MCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl-core: Add API to query the HFCLK ratePeter Ujfalusi
CFG_BOOT register's HFCLK_FREQ field hold information about the used HFCLK frequency. Add possibility for users to get the configured rate based on this register. This register was configured during boot, without it the chip would not operate correctly, so we can trust on this information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-09-30 15:29:59 +0000