summary refs log tree commit diff
AgeCommit message (Collapse)Author
2020-07-15cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unusedLee Jones
If we fail to use a variable, even a 'dummy' one, then the compiler complains that it is set but not used. We know this is fine, so we set it as __always_unused to let the compiler know. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_intel’: drivers/cpufreq/acpi-cpufreq.c:247:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_amd’: drivers/cpufreq/acpi-cpufreq.c:265:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issuesLee Jones
Repair problems with formatting and missing attributes/parameters, and demote header comments which do not meet the required standards applicable to kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_lpstate_idx' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_gpstate_idx' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'policy' not described in 'global_pstate_info' drivers/cpufreq/powernv-cpufreq.c:182: warning: Function parameter or member 'i' not described in 'idx_to_pstate' drivers/cpufreq/powernv-cpufreq.c:201: warning: Function parameter or member 'pstate' not described in 'pstate_to_idx' drivers/cpufreq/powernv-cpufreq.c:670: warning: Function parameter or member 't' not described in 'gpstate_timer_handler' drivers/cpufreq/powernv-cpufreq.c:670: warning: Excess function parameter 'data' description in 'gpstate_timer_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: pasemi: Include header file for {check,restore}_astate prototypesLee Jones
If function callers and providers do not share the same prototypes the compiler complains of missing prototypes. Fix this by including the correct platforms header file. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/pasemi-cpufreq.c:109:5: warning: no previous prototype for ‘check_astate’ [-Wmissing-prototypes] 109 | int check_astate(void) | ^~~~~~~~~~~~ drivers/cpufreq/pasemi-cpufreq.c:114:6: warning: no previous prototype for ‘restore_astate’ [-Wmissing-prototypes] 114 | void restore_astate(int cpu) | ^~~~~~~~~~~~~~ Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard ↵Lee Jones
comment block There is no need for this to be denoted as kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'attr_set' not described in 'store_sampling_rate' drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'buf' not described in 'store_sampling_rate' drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'count' not described in 'store_sampling_rate' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc statusLee Jones
Also provide missing function parameter description for 'cpu' and 'policy'. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/cpufreq.c:60: warning: cannot understand function prototype: 'struct cpufreq_driver *cpufreq_driver; ' drivers/cpufreq/cpufreq.c:90: warning: Function parameter or member 'cpufreq_policy_notifier_list' not described in 'BLOCKING_NOTIFIER_HEAD' drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'val' not described in 'adjust_jiffies' drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'ci' not described in 'adjust_jiffies' drivers/cpufreq/cpufreq.c:538: warning: Function parameter or member 'policy' not described in 'cpufreq_driver_resolve_freq' drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'file_name' not described in 'show_one' drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'object' not described in 'show_one' drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'file_name' not described in 'store_one' drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'object' not described in 'store_one' drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'policy' not described in 'show_cpuinfo_cur_freq' drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'buf' not described in 'show_cpuinfo_cur_freq' drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'policy' not described in 'show_scaling_governor' drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'buf' not described in 'show_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'policy' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'buf' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'count' not described in 'store_scaling_governor' drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'policy' not described in 'show_scaling_driver' drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'buf' not described in 'show_scaling_driver' drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'policy' not described in 'show_scaling_available_governors' drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'buf' not described in 'show_scaling_available_governors' drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'policy' not described in 'show_related_cpus' drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'buf' not described in 'show_related_cpus' drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'policy' not described in 'show_affected_cpus' drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'buf' not described in 'show_affected_cpus' drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'policy' not described in 'show_bios_limit' drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'buf' not described in 'show_bios_limit' drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'dev' not described in 'cpufreq_remove_dev' drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'sif' not described in 'cpufreq_remove_dev' drivers/cpufreq/cpufreq.c:2380: warning: Function parameter or member 'cpu' not described in 'cpufreq_get_policy' drivers/cpufreq/cpufreq.c:2771: warning: Function parameter or member 'driver' not described in 'cpufreq_unregister_driver' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-15cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones
blocks No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'policy' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'buf' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'show_boost' not described in 'show_available_freqs' drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'policy' not described in 'scaling_available_frequencies_show' drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'buf' not described in 'scaling_available_frequencies_show' drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'policy' not described in 'scaling_boost_frequencies_show' drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'buf' not described in 'scaling_boost_frequencies_show' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-13cpufreq: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-13cpufreq: intel_pstate: Fix static checker warning for epp variableSrinivas Pandruvada
Fix warning for: drivers/cpufreq/intel_pstate.c:731 store_energy_performance_preference() error: uninitialized symbol 'epp'. This warning is for a case, when energy_performance_preference attribute matches pre defined strings. In this case the value of raw epp will not be used to set EPP bits in MSR_HWP_REQUEST. So initializing with any value is fine. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Remove the weakly defined cpufreq_default_governor()Viresh Kumar
The default cpufreq governor is chosen with the help of a "choice" option in the Kconfig which will always end up selecting one of the governors and so the weakly defined definition of cpufreq_default_governor() will never get called. Moreover, this makes us skip the checking of the return value of that routine as it will always be non NULL. If the Kconfig option changes in future, then we will start getting a link error instead (and it won't go unnoticed as in the case of the weak definition). Suggested-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Specify default governor on command lineQuentin Perret
Currently, the only way to specify the default CPUfreq governor is via Kconfig options, which suits users who can build the kernel themselves perfectly. However, for those who use a distro-like kernel (such as Android, with the Generic Kernel Image project), the only way to use a non-default governor is to boot to userspace, and to then switch using the sysfs interface. Being able to specify the default governor on the command line, like is the case for cpuidle, would allow those users to specify their governor of choice earlier on, and to simplify the userspace boot procedure slighlty. To support this use-case, add a kernel command line parameter allowing the default governor for CPUfreq to be specified, which takes precedence over the built-in default. This implementation has one notable limitation: the default governor must be registered before the driver. This is solved for builtin governors and drivers using appropriate *_initcall() functions. And in the modular case, this must be reflected as a constraint on the module loading order. Signed-off-by: Quentin Perret <qperret@google.com> [ Viresh: Converted 'default_governor' to a string and parsing it only at initcall level, and several updates to cpufreq_init_policy(). ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Register governors at core_initcallQuentin Perret
Currently, most CPUFreq governors are registered at the core_initcall time when the given governor is the default one, and the module_init time otherwise. In preparation for letting users specify the default governor on the kernel command line, change all of them to be registered at the core_initcall unconditionally, as it is already the case for the schedutil and performance governors. This will allow us to assume that builtin governors have been registered before the built-in CPUFreq drivers probe. And since all governors have similar init/exit patterns now, introduce two new macros, cpufreq_governor_{init,exit}(), to factorize the code. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: Fix locking issues with governorsViresh Kumar
The locking around governors handling isn't adequate currently. The list of governors should never be traversed without the locking in place. Also governor modules must not be removed while the code in them is still in use. Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: intel_pstate: Allow raw energy performance preference valueSrinivas Pandruvada
Currently using attribute "energy_performance_preference", user space can write one of the four per-defined preference string. These preference strings gets mapped to a hard-coded Energy-Performance Preference (EPP) or Energy-Performance Bias (EPB) knob. These four values are supposed to cover broad spectrum of use cases, but are not uniformly distributed in the range. There are number of cases, where this is not enough. For example: Suppose user wants more performance when connected to AC. Instead of using default "balance performance", the "performance" setting can be used. This changes EPP value from 0x80 to 0x00. But setting EPP to 0, results in electrical and thermal issues on some platforms. This results in aggressive throttling, which causes a drop in performance. But some value between 0x80 and 0x00 results in better performance. But that value can't be fixed as the power curve is not linear. In some cases just changing EPP from 0x80 to 0x75 is enough to get significant performance gain. Similarly on battery the default "balance_performance" mode can be aggressive in power consumption. But picking up the next choice "balance power" results in too much loss of performance, which results in bad user experience in use cases like "Google Hangout". It was observed that some value between these two EPP is optimal. This change allows fine grain EPP tuning for platform like Chromebook or for users who wants to fine tune power and performance. Here based on the product and use cases, different EPP values can be set. This change is similar to the change done for: /sys/devices/system/cpu/cpu*/power/energy_perf_bias where user has choice to write a predefined string or raw value. The change itself is trivial. When user preference doesn't match predefined string preferences and value is an unsigned integer and in range, use that value for EPP. When the EPP feature is not present writing raw value is not supported. Suggested-by: Len Brown <lenb@kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-02cpufreq: intel_pstate: Allow enable/disable energy efficiencySrinivas Pandruvada
By default intel_pstate the driver disables energy efficiency by setting MSR_IA32_POWER_CTL bit 19 for Kaby Lake desktop CPU model in HWP mode. This CPU model is also shared by Coffee Lake desktop CPUs. This allows these systems to reach maximum possible frequency. But this adds power penalty, which some customers don't want. They want some way to enable/ disable dynamically. So, add an additional attribute "energy_efficiency" under /sys/devices/system/cpu/intel_pstate/ for these CPU models. This allows to read and write bit 19 ("Disable Energy Efficiency Optimization") in the MSR IA32_POWER_CTL. This attribute is present in both HWP and non-HWP mode as this has an effect in both modes. Refer to Intel Software Developer's manual for details. The scope of this bit is package wide. Also these systems are single package systems. So read/write MSR on the current CPU is enough. The energy efficiency (EE) bit setting needs to be preserved during suspend/resume and CPU offline/online operation. To do this: - Restoring the EE setting from the cpufreq resume() callback, if there is change from the system default. - By default, don't disable EE from cpufreq init() callback for matching CPU models. Since the scope is package wide and is a single package system, move the disable EE calls from init() callback to intel_pstate_init() function, which is called only once. Suggested-by: Len Brown <lenb@kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-28Linux 5.8-rc3Linus Torvalds
2020-06-28Merge tag 'arm-omap-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...
2020-06-28Merge tag 'arm-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node
2020-06-28Merge tag 'timers-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A single DocBook fix" * tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix kerneldoc system_device_crosststamp & al
2020-06-28Merge tag 'perf-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A single Kbuild dependency fix" * tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix RAPL config variable bug
2020-06-28Merge tag 'efi-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4
2020-06-28Merge tag 'sched_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: "The most anticipated fix in this pull request is probably the horrible build fix for the RANDSTRUCT fail that didn't make -rc2. Also included is the cleanup that removes those BUILD_BUG_ON()s and replaces it with ugly unions. Also included is the try_to_wake_up() race fix that was first triggered by Paul's RCU-torture runs, but was independently hit by Dave Chinner's fstest runs as well" * tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: change initial value of runnable_avg smp, irq_work: Continue smp_call_function*() and irq_work*() integration sched/core: s/WF_ON_RQ/WQ_ON_CPU/ sched/core: Fix ttwu() race sched/core: Fix PI boosting between RT and DEADLINE tasks sched/deadline: Initialize ->dl_boosted sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
2020-06-28Merge tag 'x86_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - AMD Memory bandwidth counter width fix, by Babu Moger. - Use the proper length type in the 32-bit truncate() syscall variant, by Jiri Slaby. - Reinit IA32_FEAT_CTL during wakeup to fix the case where after resume, VMXON would #GP due to VMX not being properly enabled, by Sean Christopherson. - Fix a static checker warning in the resctrl code, by Dan Carpenter. - Add a CR4 pinning mask for bits which cannot change after boot, by Kees Cook. - Align the start of the loop of __clear_user() to 16 bytes, to improve performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming. * tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/64: Align start of __clear_user() loop to 16-bytes x86/cpu: Use pinning mask for CR4 bits needing to be 0 x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup syscalls: Fix offset type of ksys_ftruncate() x86/resctrl: Fix memory bandwidth counter width for AMD
2020-06-28Merge tag 'rcu_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU-vs-KCSAN fixes from Borislav Petkov: "A single commit that uses "arch_" atomic operations to avoid the instrumentation that comes with the non-"arch_" versions. In preparation for that commit, it also has another commit that makes these "arch_" atomic operations available to generic code. Without these commits, KCSAN uses can see pointless errors" * tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Fixup noinstr warnings locking/atomics: Provide the arch_atomic_ interface to generic code
2020-06-28Merge tag 'objtool_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "Three fixes from Peter Zijlstra suppressing KCOV instrumentation in noinstr sections. Peter Zijlstra says: "Address KCOV vs noinstr. There is no function attribute to selectively suppress KCOV instrumentation, instead teach objtool to NOP out the calls in noinstr functions" This cures a bunch of KCOV crashes (as used by syzcaller)" * tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noinstr vs KCOV objtool: Provide elf_write_{insn,reloc}() objtool: Clean up elf_write() condition
2020-06-28Merge tag 'x86_entry_for_5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry fixes from Borislav Petkov: "This is the x86/entry urgent pile which has accumulated since the merge window. It is not the smallest but considering the almost complete entry core rewrite, the amount of fixes to follow is somewhat higher than usual, which is to be expected. Peter Zijlstra says: 'These patches address a number of instrumentation issues that were found after the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy again. Part of making this all work is bumping the minimum GCC version for KASAN builds to gcc-8.3, the reason for this is that the __no_sanitize_address function attribute is broken in GCC releases before that. No known GCC version has a working __no_sanitize_undefined, however because the only noinstr violation that results from this happens when an UB is found, we treat it like WARN. That is, we allow it to violate the noinstr rules in order to get the warning out'" * tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix #UD vs WARN more x86/entry: Increase entry_stack size to a full page x86/entry: Fixup bad_iret vs noinstr objtool: Don't consider vmlinux a C-file kasan: Fix required compiler version compiler_attributes.h: Support no_sanitize_undefined check with GCC 4 x86/entry, bug: Comment the instrumentation_begin() usage for WARN() x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*() x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline() compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr kasan: Bump required compiler version x86, kcsan: Add __no_kcsan to noinstr kcsan: Remove __no_kcsan_or_inline x86, kcsan: Remove __no_kcsan_or_inline usage
2020-06-28sched/cfs: change initial value of runnable_avgVincent Guittot
Some performance regression on reaim benchmark have been raised with commit 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") The problem comes from the init value of runnable_avg which is initialized with max value. This can be a problem if the newly forked task is finally a short task because the group of CPUs is wrongly set to overloaded and tasks are pulled less agressively. Set initial value of runnable_avg equals to util_avg to reflect that there is no waiting time so far. Fixes: 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
2020-06-28smp, irq_work: Continue smp_call_function*() and irq_work*() integrationPeter Zijlstra
Instead of relying on BUG_ON() to ensure the various data structures line up, use a bunch of horrible unions to make it all automatic. Much of the union magic is to ensure irq_work and smp_call_function do not (yet) see the members of their respective data structures change name. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
2020-06-28sched/core: s/WF_ON_RQ/WQ_ON_CPU/Peter Zijlstra
Use a better name for this poorly named flag, to avoid confusion... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org
2020-06-28sched/core: Fix ttwu() racePeter Zijlstra
Paul reported rcutorture occasionally hitting a NULL deref: sched_ttwu_pending() ttwu_do_wakeup() check_preempt_curr() := check_preempt_wakeup() find_matching_se() is_same_group() if (se->cfs_rq == pse->cfs_rq) <-- *BOOM* Debugging showed that this only appears to happen when we take the new code-path from commit: 2ebb17717550 ("sched/core: Offload wakee task activation if it the wakee is descheduling") and only when @cpu == smp_processor_id(). Something which should not be possible, because p->on_cpu can only be true for remote tasks. Similarly, without the new code-path from commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") this would've unconditionally hit: smp_cond_load_acquire(&p->on_cpu, !VAL); and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this would result in an instant live-lock (with IRQs disabled), something that hasn't been reported. The NULL deref can be explained however if the task_cpu(p) load at the beginning of try_to_wake_up() returns an old value, and this old value happens to be smp_processor_id(). Further assume that the p->on_cpu load accurately returns 1, it really is still running, just not here. Then, when we enqueue the task locally, we can crash in exactly the observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq is from the wrong CPU, therefore we'll iterate into the non-existant parents and NULL deref. The closest semi-plausible scenario I've managed to contrive is somewhat elaborate (then again, actual reproduction takes many CPU hours of rcutorture, so it can't be anything obvious): X->cpu = 1 rq(1)->curr = X CPU0 CPU1 CPU2 // switch away from X LOCK rq(1)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 9 switch_to(Z) X->on_cpu = 0 UNLOCK rq(1)->lock // migrate X to cpu 0 LOCK rq(1)->lock dequeue_task(X) set_task_cpu(X, 0) X->cpu = 0 UNLOCK rq(1)->lock LOCK rq(0)->lock enqueue_task(X) X->on_rq = 1 UNLOCK rq(0)->lock // switch to X LOCK rq(0)->lock smp_mb__after_spinlock switch_to(X) X->on_cpu = 1 UNLOCK rq(0)->lock // X goes sleep X->state = TASK_UNINTERRUPTIBLE smp_mb(); // wake X ttwu() LOCK X->pi_lock smp_mb__after_spinlock if (p->state) cpu = X->cpu; // =? 1 smp_rmb() // X calls schedule() LOCK rq(0)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 0 if (p->on_rq) smp_rmb(); if (p->on_cpu && ttwu_queue_wakelist(..)) [*] smp_cond_load_acquire(&p->on_cpu, !VAL) cpu = select_task_rq(X, X->wake_cpu, ...) if (X->cpu != cpu) switch_to(Y) X->on_cpu = 0 UNLOCK rq(0)->lock However I'm having trouble convincing myself that's actually possible on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu observes ->state != RUNNING, it must also observe ->cpu != 1. (Most of the previous ttwu() races were found on very large PowerPC) Nevertheless, this fully explains the observed failure case. Fix it by ordering the task_cpu(p) load after the p->on_cpu load, which is easy since nothing actually uses @cpu before this. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net
2020-06-28sched/core: Fix PI boosting between RT and DEADLINE tasksJuri Lelli
syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
2020-06-28sched/deadline: Initialize ->dl_boostedJuri Lelli
syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
2020-06-28sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to ↵Scott Wood
fix mask corruption This function is concerned with the long-term CPU mask, not the transitory mask the task might have while migrate disabled. Before this patch, if a task was migrate-disabled at the time __set_cpus_allowed_ptr() was called, and the new mask happened to be equal to the CPU that the task was running on, then the mask update would be lost. Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
2020-06-28sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build failPeter Zijlstra
As a temporary build fix, the proper cleanup needs more work. Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Kees Cook <keescook@chromium.org> Fixes: a148866489fb ("sched: Replace rq::wake_list") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-06-28Merge tag 'imx-fixes-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/drivers-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes for 5.8, please pull the following: - Andy provides a fix for the Raspberry Pi firmware driver to print the correct time upon boot. This is a fallout from a converstion to use the ptT format * tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine/Kconfig fixes for 5.8, please pull the following: - Matthew adds a missing select to permit the use of the standard ARM SP804 timers on Norsthstar Plus (NSP) * tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP Link: https://lore.kernel.org/r/20200619202250.19029-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.8, please pull the following: - Rafal adds a missing 'device_type' property to the Luxul XWC-2000 required for the memory nodes to be correctly parsed by Linux - Matthew provides two fixes for the NSP SoCs, one to disable the PL330 DMA controller by default since it can be left in reset by the bootloader and the second to correct the flow accelerator mailbox node * tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: NSP: Correct FA2 mailbox node ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Revert "ARM: sti: Implement dummy L2 cache's write_sec"Patrice Chotard
This reverts commit 7b8e0188fa717cd9abc4fb52587445b421835c2a. Initially, STiH410-B2260 was supposed to be secured, that's why l2c_write_sec was stubbed to avoid secure register access from non secure world. But by default, STiH410-B2260 is running in non secure mode, so L2 cache register accesses are authorized, l2c_write_sec stub is not needed. With this patch, L2 cache is configured and performance are enhanced. Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Alain Volmat <alain.volmat@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-rc1-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Few dts fixes for omaps for v5.8 Few fixes for various devices: - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode * tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/dt-missed-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Missed sdhci patch for am3 and am4 I forgot to send a pull request earlier for converting am3 and am4 to use sdhci-omap driver instead of the old omap_hsmmc driver. There was a display subsystem related suspend and resume regression found recently and looks like I forgot to send a pull request for this patch while debugging the regression. This patch has been tested without the display subsystem, and has been in Linux next for several weeks now, so would be good to have merged for v5.8. * tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'tee-ml-for-v5.8' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Change the TEE mailing list in MAINTAINERS * tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee: MAINTAINERS: change tee mailing list Link: https://lore.kernel.org/r/20200616075948.GA2288211@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-27afs: Fix storage of cell namesDavid Howells
The cell name stored in the afs_cell struct is a 64-char + NUL buffer - when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL. Fix this by changing the array to a pointer and allocating the string. Found using Coverity. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-27Merge tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Six cifs/smb3 fixes, three of them for stable. Fixes xfstests 451, 313 and 316" * tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: misc: Use array_size() in if-statement controlling expression cifs: update ctime and mtime during truncate cifs/smb3: Fix data inconsistent when punch hole cifs/smb3: Fix data inconsistent when zero file range cifs: Fix double add page to memcg when cifs_readpages cifs: Fix cached_fid refcnt leak in open_shroot
2020-06-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
2020-06-27Merge tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix double free of eventfd ctx (Alex Williamson) - Fix duplicate use of capability ID (Alex Williamson) - Fix SR-IOV VF memory enable handling (Alex Williamson) * tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix SR-IOV VF handling with MMIO blocking vfio/type1: Fix migration info capability ID vfio/pci: Clear error and request eventfd ctx after releasing
2020-06-27Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "This contains a 5.8 regression fix for the Designware driver, a register bitfield fix for the fsi driver, and a missing sanity check for the I2C core" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: check returned size of emulated smbus block read i2c: fsi: Fix the port number field in status register i2c: designware: Adjust bus speed independently of ACPI
2020-06-27Merge tag 'staging-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a small number of tiny staging driver fixes for 5.8-rc3. Not much here, but there were some reported problems to be fixed: - three wfx driver fixes - rtl8723bs driver fix All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() staging: wfx: fix coherency of hif_scan() prototype staging: wfx: drop useless loop staging: wfx: fix AC priority
2020-06-27Merge tag 'usb-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.8-rc3 to resolve some reported issues. Nothing major here: - gadget driver fixes - cdns3 driver fixes - xhci fixes - renesas_usbhs driver fixes - some new device support with ids - documentation update All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) usb: renesas_usbhs: getting residue from callback_result Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" xhci: Poll for U0 after disabling USB2 LPM xhci: Return if xHCI doesn't support LPM usb: host: xhci-mtk: avoid runtime suspend when removing hcd xhci: Fix enumeration issue when setting max packet size for FS devices. xhci: Fix incorrect EP_STATE_MASK usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" usb: gadget: udc: Potential Oops in error handling code usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe() usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs USB: ohci-sm501: Add missed iounmap() in remove cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip ...
2020-06-27Merge tag 'char-misc-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Some tiny char/misc driver fixes for 5.8-rc3. The "largest" changes are in the mei driver, to resolve some reported problems and add some new device ids. There's also a binder bugfix, an fpga driver build fix, and some assorted habanalabs fixes. All of these, except for the habanalabs fixes, have been in linux-next with no reported issues. The habanalabs driver changes showed up in my tree on Friday, but as they are totally self-contained, all should be good there" * tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: increase h/w timer when checking idle habanalabs: Correct handling when failing to enqueue CB habanalabs: increase GAUDI QMAN ARB WDT timeout habanalabs: rename mmu_write() to mmu_asid_va_write() habanalabs: use PI in MMU cache invalidation habanalabs: block scalar load_and_exe on external queue mei: me: add tiger lake point device ids for H platforms. mei: me: disable mei interface on Mehlow server platforms binder: fix null deref of proc->context fpga: zynqmp: fix modular build
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-04 05:32:01 +0000