diff options
Diffstat (limited to 'sound/soc/intel/boards/Kconfig')
| -rw-r--r-- | sound/soc/intel/boards/Kconfig | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig new file mode 100644 index 000000000000..d4e103615f51 --- /dev/null +++ b/sound/soc/intel/boards/Kconfig @@ -0,0 +1,260 @@ +menuconfig SND_SOC_INTEL_MACH + bool "Intel Machine drivers" + depends on SND_SOC_INTEL_SST_TOPLEVEL + help + Intel ASoC Machine Drivers. If you have a Intel machine that + has an audio controller with a DSP and I2S or DMIC port, then + enable this option by saying Y + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel ASoC machine drivers. + +if SND_SOC_INTEL_MACH + +if SND_SOC_INTEL_HASWELL + +config SND_SOC_INTEL_HASWELL_MACH + tristate "Haswell Lynxpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + select SND_SOC_RT5640 + help + This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell + Ultrabook platforms. This is a recommended option. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BDW_RT5677_MACH + tristate "Broadwell with RT5677 codec" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB + select SND_SOC_RT5677 + help + This adds support for Intel Broadwell platform based boards with + the RT5677 audio codec. This is a recommended option. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BROADWELL_MACH + tristate "Broadwell Wildcatpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + select SND_SOC_RT286 + help + This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell + Ultrabook platforms. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". +endif ## SND_SOC_INTEL_HASWELL + +if SND_SOC_INTEL_BAYTRAIL + +config SND_SOC_INTEL_BYT_MAX98090_MACH + tristate "Baytrail with MAX98090 codec" + depends on X86_INTEL_LPSS && I2C + select SND_SOC_MAX98090 + help + This adds audio driver for Intel Baytrail platform based boards + with the MAX98090 audio codec. This driver is deprecated, use + SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH instead for better + functionality. + +config SND_SOC_INTEL_BYT_RT5640_MACH + tristate "Baytrail with RT5640 codec" + depends on X86_INTEL_LPSS && I2C + select SND_SOC_RT5640 + help + This adds audio driver for Intel Baytrail platform based boards + with the RT5640 audio codec. This driver is deprecated, use + SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. + +endif ## SND_SOC_INTEL_BAYTRAIL + +if SND_SST_ATOM_HIFI2_PLATFORM + +config SND_SOC_INTEL_BYTCR_RT5640_MACH + tristate "Baytrail and Baytrail-CR with RT5640 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_RT5640 + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5640 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYTCR_RT5651_MACH + tristate "Baytrail and Baytrail-CR with RT5651 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_RT5651 + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5651 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5672_MACH + tristate "Cherrytrail & Braswell with RT5672 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_RT5670 + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5672 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5645_MACH + tristate "Cherrytrail & Braswell with RT5645/5650 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_RT5645 + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5645/5650 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH + tristate "Cherrytrail & Braswell with MAX98090 & TI codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_MAX98090 + select SND_SOC_TS3A227E + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with MAX98090 audio codec it also can support TI jack chip as aux device. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "Baytrail & Cherrytrail with DA7212/7213 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_DA7213 + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "Baytrail & Cherrytrail with ES8316 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ACPI + select SND_SOC_ES8316 + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on X86_INTEL_LPSS && I2C && ACPI + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector. This is not a recommended option outside of these cases. + It is not intended to be enabled by distros by default. + Say Y or m if you have such a device. + + If unsure select "N". + +endif ## SND_SST_ATOM_HIFI2_PLATFORM + +if SND_SOC_INTEL_SKYLAKE + +config SND_SOC_INTEL_SKL_RT286_MACH + tristate "SKL with RT286 I2S mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT286 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for Skylake platforms + with RT286 I2S audio codec. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH + tristate "SKL with NAU88L25 and SSM4567 in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_NAU8825 + select SND_SOC_SSM4567 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + SSM4567. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH + tristate "SKL with NAU88L25 and MAX98357A in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_NAU8825 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + MAX98357A. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH + tristate "Broxton with DA7219 and MAX98357A in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_DA7219 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton-P platforms + with DA7219 + MAX98357A I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "Broxton with RT298 I2S mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH + tristate "KBL with RT5663 and MAX98927 in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5663 + select SND_SOC_MAX98927 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + MAX98927. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + depends on SPI + select SND_SOC_RT5663 + select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI + select SND_SOC_MAX98927 + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + RT5514 + MAX98927. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". +endif ## SND_SOC_INTEL_SKYLAKE + +endif ## SND_SOC_INTEL_MACH |