diff options
Diffstat (limited to 'mm')
| -rw-r--r-- | mm/Kconfig | 118 | ||||
| -rw-r--r-- | mm/zswap.c | 24 |
2 files changed, 129 insertions, 13 deletions
diff --git a/mm/Kconfig b/mm/Kconfig index d286dc54458c..691021492e78 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -533,7 +533,6 @@ config MEM_SOFT_DIRTY config ZSWAP bool "Compressed cache for swap pages (EXPERIMENTAL)" depends on FRONTSWAP && CRYPTO=y - select CRYPTO_LZO select ZPOOL help A lightweight compressed cache for swap pages. It takes @@ -549,6 +548,123 @@ config ZSWAP they have not be fully explored on the large set of potential configurations and workloads that exist. +choice + prompt "Compressed cache for swap pages default compressor" + depends on ZSWAP + default ZSWAP_COMPRESSOR_DEFAULT_LZO + help + Selects the default compression algorithm for the compressed cache + for swap pages. + + For an overview what kind of performance can be expected from + a particular compression algorithm please refer to the benchmarks + available at the following LWN page: + https://lwn.net/Articles/751795/ + + If in doubt, select 'LZO'. + + The selection made here can be overridden by using the kernel + command line 'zswap.compressor=' option. + +config ZSWAP_COMPRESSOR_DEFAULT_DEFLATE + bool "Deflate" + select CRYPTO_DEFLATE + help + Use the Deflate algorithm as the default compression algorithm. + +config ZSWAP_COMPRESSOR_DEFAULT_LZO + bool "LZO" + select CRYPTO_LZO + help + Use the LZO algorithm as the default compression algorithm. + +config ZSWAP_COMPRESSOR_DEFAULT_842 + bool "842" + select CRYPTO_842 + help + Use the 842 algorithm as the default compression algorithm. + +config ZSWAP_COMPRESSOR_DEFAULT_LZ4 + bool "LZ4" + select CRYPTO_LZ4 + help + Use the LZ4 algorithm as the default compression algorithm. + +config ZSWAP_COMPRESSOR_DEFAULT_LZ4HC + bool "LZ4HC" + select CRYPTO_LZ4HC + help + Use the LZ4HC algorithm as the default compression algorithm. + +config ZSWAP_COMPRESSOR_DEFAULT_ZSTD + bool "zstd" + select CRYPTO_ZSTD + help + Use the zstd algorithm as the default compression algorithm. +endchoice + +config ZSWAP_COMPRESSOR_DEFAULT + string + depends on ZSWAP + default "deflate" if ZSWAP_COMPRESSOR_DEFAULT_DEFLATE + default "lzo" if ZSWAP_COMPRESSOR_DEFAULT_LZO + default "842" if ZSWAP_COMPRESSOR_DEFAULT_842 + default "lz4" if ZSWAP_COMPRESSOR_DEFAULT_LZ4 + default "lz4hc" if ZSWAP_COMPRESSOR_DEFAULT_LZ4HC + default "zstd" if ZSWAP_COMPRESSOR_DEFAULT_ZSTD + default "" + +choice + prompt "Compressed cache for swap pages default allocator" + depends on ZSWAP + default ZSWAP_ZPOOL_DEFAULT_ZBUD + help + Selects the default allocator for the compressed cache for + swap pages. + The default is 'zbud' for compatibility, however please do + read the description of each of the allocators below before + making a right choice. + + The selection made here can be overridden by using the kernel + command line 'zswap.zpool=' option. + +config ZSWAP_ZPOOL_DEFAULT_ZBUD + bool "zbud" + select ZBUD + help + Use the zbud allocator as the default allocator. + +config ZSWAP_ZPOOL_DEFAULT_Z3FOLD + bool "z3fold" + select Z3FOLD + help + Use the z3fold allocator as the default allocator. + +config ZSWAP_ZPOOL_DEFAULT_ZSMALLOC + bool "zsmalloc" + select ZSMALLOC + help + Use the zsmalloc allocator as the default allocator. +endchoice + +config ZSWAP_ZPOOL_DEFAULT + string + depends on ZSWAP + default "zbud" if ZSWAP_ZPOOL_DEFAULT_ZBUD + default "z3fold" if ZSWAP_ZPOOL_DEFAULT_Z3FOLD + default "zsmalloc" if ZSWAP_ZPOOL_DEFAULT_ZSMALLOC + default "" + +config ZSWAP_DEFAULT_ON + bool "Enable the compressed cache for swap pages by default" + depends on ZSWAP + help + If selected, the compressed cache for swap pages will be enabled + at boot, otherwise it will be disabled. + + The selection made here can be overridden by using the kernel + command line 'zswap.enabled=' option. + config ZPOOL tristate "Common API for compressed memory storage" help diff --git a/mm/zswap.c b/mm/zswap.c index 55094e63b72d..fbb782924ccc 100644 --- a/mm/zswap.c +++ b/mm/zswap.c @@ -77,8 +77,8 @@ static bool zswap_pool_reached_full; #define ZSWAP_PARAM_UNSET "" -/* Enable/disable zswap (disabled by default) */ -static bool zswap_enabled; +/* Enable/disable zswap */ +static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON); static int zswap_enabled_param_set(const char *, const struct kernel_param *); static struct kernel_param_ops zswap_enabled_param_ops = { @@ -88,8 +88,7 @@ static struct kernel_param_ops zswap_enabled_param_ops = { module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644); /* Crypto compressor to use */ -#define ZSWAP_COMPRESSOR_DEFAULT "lzo" -static char *zswap_compressor = ZSWAP_COMPRESSOR_DEFAULT; +static char *zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT; static int zswap_compressor_param_set(const char *, const struct kernel_param *); static struct kernel_param_ops zswap_compressor_param_ops = { @@ -101,8 +100,7 @@ module_param_cb(compressor, &zswap_compressor_param_ops, &zswap_compressor, 0644); /* Compressed storage zpool to use */ -#define ZSWAP_ZPOOL_DEFAULT "zbud" -static char *zswap_zpool_type = ZSWAP_ZPOOL_DEFAULT; +static char *zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT; static int zswap_zpool_param_set(const char *, const struct kernel_param *); static struct kernel_param_ops zswap_zpool_param_ops = { .set = zswap_zpool_param_set, @@ -599,11 +597,12 @@ static __init struct zswap_pool *__zswap_pool_create_fallback(void) bool has_comp, has_zpool; has_comp = crypto_has_comp(zswap_compressor, 0, 0); - if (!has_comp && strcmp(zswap_compressor, ZSWAP_COMPRESSOR_DEFAULT)) { + if (!has_comp && strcmp(zswap_compressor, + CONFIG_ZSWAP_COMPRESSOR_DEFAULT)) { pr_err("compressor %s not available, using default %s\n", - zswap_compressor, ZSWAP_COMPRESSOR_DEFAULT); + zswap_compressor, CONFIG_ZSWAP_COMPRESSOR_DEFAULT); param_free_charp(&zswap_compressor); - zswap_compressor = ZSWAP_COMPRESSOR_DEFAULT; + zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT; has_comp = crypto_has_comp(zswap_compressor, 0, 0); } if (!has_comp) { @@ -614,11 +613,12 @@ static __init struct zswap_pool *__zswap_pool_create_fallback(void) } has_zpool = zpool_has_pool(zswap_zpool_type); - if (!has_zpool && strcmp(zswap_zpool_type, ZSWAP_ZPOOL_DEFAULT)) { + if (!has_zpool && strcmp(zswap_zpool_type, + CONFIG_ZSWAP_ZPOOL_DEFAULT)) { pr_err("zpool %s not available, using default %s\n", - zswap_zpool_type, ZSWAP_ZPOOL_DEFAULT); + zswap_zpool_type, CONFIG_ZSWAP_ZPOOL_DEFAULT); param_free_charp(&zswap_zpool_type); - zswap_zpool_type = ZSWAP_ZPOOL_DEFAULT; + zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT; has_zpool = zpool_has_pool(zswap_zpool_type); } if (!has_zpool) { |