diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/uapi/linux/can/isotp.h | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h new file mode 100644 index 000000000000..553006509f4e --- /dev/null +++ b/include/uapi/linux/can/isotp.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* + * linux/can/isotp.h + * + * Definitions for isotp CAN sockets (ISO 15765-2:2016) + * + * Copyright (c) 2020 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + */ + +#ifndef _UAPI_CAN_ISOTP_H +#define _UAPI_CAN_ISOTP_H + +#include <linux/types.h> +#include <linux/can.h> + +#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP) + +/* for socket options affecting the socket (not the global system) */ + +#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */ + +#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */ + +/* sockopts to force stmin timer values for protocol regression tests */ + +#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */ + /* use this time instead of value */ + /* provided in FC from the receiver */ + +#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */ + /* ignore received CF frames which */ + /* timestamps differ less than val */ + +#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */ + +struct can_isotp_options { + + __u32 flags; /* set flags for isotp behaviour. */ + /* __u32 value : flags see below */ + + __u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */ + /* __u32 value : time in nano secs */ + + __u8 ext_address; /* set address for extended addressing */ + /* __u8 value : extended address */ + + __u8 txpad_content; /* set content of padding byte (tx) */ + /* __u8 value : content on tx path */ + + __u8 rxpad_content; /* set content of padding byte (rx) */ + /* __u8 value : content on rx path */ + + __u8 rx_ext_address; /* set address for extended addressing */ + /* __u8 value : extended address (rx) */ +}; + +struct can_isotp_fc_options { + + __u8 bs; /* blocksize provided in FC frame */ + /* __u8 value : blocksize. 0 = off */ + + __u8 stmin; /* separation time provided in FC frame */ + /* __u8 value : */ + /* 0x00 - 0x7F : 0 - 127 ms */ + /* 0x80 - 0xF0 : reserved */ + /* 0xF1 - 0xF9 : 100 us - 900 us */ + /* 0xFA - 0xFF : reserved */ + + __u8 wftmax; /* max. number of wait frame transmiss. */ + /* __u8 value : 0 = omit FC N_PDU WT */ +}; + +struct can_isotp_ll_options { + + __u8 mtu; /* generated & accepted CAN frame type */ + /* __u8 value : */ + /* CAN_MTU (16) -> standard CAN 2.0 */ + /* CANFD_MTU (72) -> CAN FD frame */ + + __u8 tx_dl; /* tx link layer data length in bytes */ + /* (configured maximum payload length) */ + /* __u8 value : 8,12,16,20,24,32,48,64 */ + /* => rx path supports all LL_DL values */ + + __u8 tx_flags; /* set into struct canfd_frame.flags */ + /* at frame creation: e.g. CANFD_BRS */ + /* Obsolete when the BRS flag is fixed */ + /* by the CAN netdriver configuration */ +}; + +/* flags for isotp behaviour */ + +#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ + + +/* default values */ + +#define CAN_ISOTP_DEFAULT_FLAGS 0 +#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 +#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_RECV_BS 0 +#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 +#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * Remark on CAN_ISOTP_DEFAULT_RECV_* values: + * + * We can strongly assume, that the Linux Kernel implementation of + * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0. + * But as we like to be able to behave as a commonly available ECU, + * these default settings can be changed via sockopts. + * For that reason the STmin value is intentionally _not_ checked for + * consistency and copied directly into the flow control (FC) frame. + * + */ + +#endif /* !_UAPI_CAN_ISOTP_H */ |