diff options
Diffstat (limited to 'include/media/drv-intf/saa7146.h')
| -rw-r--r-- | include/media/drv-intf/saa7146.h | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h new file mode 100644 index 000000000000..96058a5a4acc --- /dev/null +++ b/include/media/drv-intf/saa7146.h @@ -0,0 +1,471 @@ +#ifndef __SAA7146__ +#define __SAA7146__ + +#include <linux/delay.h> /* for delay-stuff */ +#include <linux/slab.h> /* for kmalloc/kfree */ +#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */ +#include <linux/init.h> /* for "__init" */ +#include <linux/interrupt.h> /* for IMMEDIATE_BH */ +#include <linux/kmod.h> /* for kernel module loader */ +#include <linux/i2c.h> /* for i2c subsystem */ +#include <asm/io.h> /* for accessing devices */ +#include <linux/stringify.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +#include <linux/vmalloc.h> /* for vmalloc() */ +#include <linux/mm.h> /* for vmalloc_to_page() */ + +#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) +#define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) + +extern unsigned int saa7146_debug; + +#ifndef DEBUG_VARIABLE + #define DEBUG_VARIABLE saa7146_debug +#endif + +#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) + +#define _DBG(mask, fmt, ...) \ +do { \ + if (DEBUG_VARIABLE & mask) \ + pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \ +} while (0) + +/* simple debug messages */ +#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__) +/* more detailed debug messages */ +#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__) +/* print enter and exit of functions */ +#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__) +/* i2c debug messages */ +#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__) +/* vbi debug messages */ +#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__) +/* interrupt debug messages */ +#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__) +/* capture debug messages */ +#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__) + +#define SAA7146_ISR_CLEAR(x,y) \ + saa7146_write(x, ISR, (y)); + +struct module; + +struct saa7146_dev; +struct saa7146_extension; +struct saa7146_vv; + +/* saa7146 page table */ +struct saa7146_pgtable { + unsigned int size; + __le32 *cpu; + dma_addr_t dma; + /* used for offsets for u,v planes for planar capture modes */ + unsigned long offset; + /* used for custom pagetables (used for example by budget dvb cards) */ + struct scatterlist *slist; + int nents; +}; + +struct saa7146_pci_extension_data { + struct saa7146_extension *ext; + void *ext_priv; /* most likely a name string */ +}; + +#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \ + { \ + .vendor = PCI_VENDOR_ID_PHILIPS, \ + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, \ + .subvendor = x_vendor, \ + .subdevice = x_device, \ + .driver_data = (unsigned long)& x_var, \ + } + +struct saa7146_extension +{ + char name[32]; /* name of the device */ +#define SAA7146_USE_I2C_IRQ 0x1 +#define SAA7146_I2C_SHORT_DELAY 0x2 + int flags; + + /* pairs of subvendor and subdevice ids for + supported devices, last entry 0xffff, 0xfff */ + struct module *module; + struct pci_driver driver; + struct pci_device_id *pci_tbl; + + /* extension functions */ + int (*probe)(struct saa7146_dev *); + int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *); + int (*detach)(struct saa7146_dev*); + + u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */ + void (*irq_func)(struct saa7146_dev*, u32* irq_mask); +}; + +struct saa7146_dma +{ + dma_addr_t dma_handle; + __le32 *cpu_addr; +}; + +struct saa7146_dev +{ + struct module *module; + + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + + /* different device locks */ + spinlock_t slock; + struct mutex v4l2_lock; + + unsigned char __iomem *mem; /* pointer to mapped IO memory */ + u32 revision; /* chip revision; needed for bug-workarounds*/ + + /* pci-device & irq stuff*/ + char name[32]; + struct pci_dev *pci; + u32 int_todo; + spinlock_t int_slock; + + /* extension handling */ + struct saa7146_extension *ext; /* indicates if handled by extension */ + void *ext_priv; /* pointer for extension private use (most likely some private data) */ + struct saa7146_ext_vv *ext_vv_data; + + /* per device video/vbi informations (if available) */ + struct saa7146_vv *vv_data; + void (*vv_callback)(struct saa7146_dev *dev, unsigned long status); + + /* i2c-stuff */ + struct mutex i2c_lock; + + u32 i2c_bitrate; + struct saa7146_dma d_i2c; /* pointer to i2c memory */ + wait_queue_head_t i2c_wq; + int i2c_op; + + /* memories */ + struct saa7146_dma d_rps0; + struct saa7146_dma d_rps1; +}; + +static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev); +} + +/* from saa7146_i2c.c */ +int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate); + +/* from saa7146_core.c */ +int saa7146_register_extension(struct saa7146_extension*); +int saa7146_unregister_extension(struct saa7146_extension*); +struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc); +int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt); +void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt); +int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length ); +void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt); +void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt); +void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data); +int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop); + +/* some memory sizes */ +#define SAA7146_I2C_MEM ( 1*PAGE_SIZE) +#define SAA7146_RPS_MEM ( 1*PAGE_SIZE) + +/* some i2c constants */ +#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */ +#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */ +#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */ + +/* unsorted defines */ +#define ME1 0x0000000800 +#define PV1 0x0000000008 + +/* gpio defines */ +#define SAA7146_GPIO_INPUT 0x00 +#define SAA7146_GPIO_IRQHI 0x10 +#define SAA7146_GPIO_IRQLO 0x20 +#define SAA7146_GPIO_IRQHL 0x30 +#define SAA7146_GPIO_OUTLO 0x40 +#define SAA7146_GPIO_OUTHI 0x50 + +/* debi defines */ +#define DEBINOSWAP 0x000e0000 + +/* define for the register programming sequencer (rps) */ +#define CMD_NOP 0x00000000 /* No operation */ +#define CMD_CLR_EVENT 0x00000000 /* Clear event */ +#define CMD_SET_EVENT 0x10000000 /* Set signal event */ +#define CMD_PAUSE 0x20000000 /* Pause */ +#define CMD_CHECK_LATE 0x30000000 /* Check late */ +#define CMD_UPLOAD 0x40000000 /* Upload */ +#define CMD_STOP 0x50000000 /* Stop */ +#define CMD_INTERRUPT 0x60000000 /* Interrupt */ +#define CMD_JUMP 0x80000000 /* Jump */ +#define CMD_WR_REG 0x90000000 /* Write (load) register */ +#define CMD_RD_REG 0xa0000000 /* Read (store) register */ +#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */ + +#define CMD_OAN MASK_27 +#define CMD_INV MASK_26 +#define CMD_SIG4 MASK_25 +#define CMD_SIG3 MASK_24 +#define CMD_SIG2 MASK_23 +#define CMD_SIG1 MASK_22 +#define CMD_SIG0 MASK_21 +#define CMD_O_FID_B MASK_14 +#define CMD_E_FID_B MASK_13 +#define CMD_O_FID_A MASK_12 +#define CMD_E_FID_A MASK_11 + +/* some events and command modifiers for rps1 squarewave generator */ +#define EVT_HS (1<<15) // Source Line Threshold reached +#define EVT_VBI_B (1<<9) // VSYNC Event +#define RPS_OAN (1<<27) // 1: OR events, 0: AND events +#define RPS_INV (1<<26) // Invert (compound) event +#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits + +/* Bit mask constants */ +#define MASK_00 0x00000001 /* Mask value for bit 0 */ +#define MASK_01 0x00000002 /* Mask value for bit 1 */ +#define MASK_02 0x00000004 /* Mask value for bit 2 */ +#define MASK_03 0x00000008 /* Mask value for bit 3 */ +#define MASK_04 0x00000010 /* Mask value for bit 4 */ +#define MASK_05 0x00000020 /* Mask value for bit 5 */ +#define MASK_06 0x00000040 /* Mask value for bit 6 */ +#define MASK_07 0x00000080 /* Mask value for bit 7 */ +#define MASK_08 0x00000100 /* Mask value for bit 8 */ +#define MASK_09 0x00000200 /* Mask value for bit 9 */ +#define MASK_10 0x00000400 /* Mask value for bit 10 */ +#define MASK_11 0x00000800 /* Mask value for bit 11 */ +#define MASK_12 0x00001000 /* Mask value for bit 12 */ +#define MASK_13 0x00002000 /* Mask value for bit 13 */ +#define MASK_14 0x00004000 /* Mask value for bit 14 */ +#define MASK_15 0x00008000 /* Mask value for bit 15 */ +#define MASK_16 0x00010000 /* Mask value for bit 16 */ +#define MASK_17 0x00020000 /* Mask value for bit 17 */ +#define MASK_18 0x00040000 /* Mask value for bit 18 */ +#define MASK_19 0x00080000 /* Mask value for bit 19 */ +#define MASK_20 0x00100000 /* Mask value for bit 20 */ +#define MASK_21 0x00200000 /* Mask value for bit 21 */ +#define MASK_22 0x00400000 /* Mask value for bit 22 */ +#define MASK_23 0x00800000 /* Mask value for bit 23 */ +#define MASK_24 0x01000000 /* Mask value for bit 24 */ +#define MASK_25 0x02000000 /* Mask value for bit 25 */ +#define MASK_26 0x04000000 /* Mask value for bit 26 */ +#define MASK_27 0x08000000 /* Mask value for bit 27 */ +#define MASK_28 0x10000000 /* Mask value for bit 28 */ +#define MASK_29 0x20000000 /* Mask value for bit 29 */ +#define MASK_30 0x40000000 /* Mask value for bit 30 */ +#define MASK_31 0x80000000 /* Mask value for bit 31 */ + +#define MASK_B0 0x000000ff /* Mask value for byte 0 */ +#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */ +#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */ +#define MASK_B3 0xff000000 /* Mask value for byte 3 */ + +#define MASK_W0 0x0000ffff /* Mask value for word 0 */ +#define MASK_W1 0xffff0000 /* Mask value for word 1 */ + +#define MASK_PA 0xfffffffc /* Mask value for physical address */ +#define MASK_PR 0xfffffffe /* Mask value for protection register */ +#define MASK_ER 0xffffffff /* Mask value for the entire register */ + +#define MASK_NONE 0x00000000 /* No mask */ + +/* register aliases */ +#define BASE_ODD1 0x00 /* Video DMA 1 registers */ +#define BASE_EVEN1 0x04 +#define PROT_ADDR1 0x08 +#define PITCH1 0x0C +#define BASE_PAGE1 0x10 /* Video DMA 1 base page */ +#define NUM_LINE_BYTE1 0x14 + +#define BASE_ODD2 0x18 /* Video DMA 2 registers */ +#define BASE_EVEN2 0x1C +#define PROT_ADDR2 0x20 +#define PITCH2 0x24 +#define BASE_PAGE2 0x28 /* Video DMA 2 base page */ +#define NUM_LINE_BYTE2 0x2C + +#define BASE_ODD3 0x30 /* Video DMA 3 registers */ +#define BASE_EVEN3 0x34 +#define PROT_ADDR3 0x38 +#define PITCH3 0x3C +#define BASE_PAGE3 0x40 /* Video DMA 3 base page */ +#define NUM_LINE_BYTE3 0x44 + +#define PCI_BT_V1 0x48 /* Video/FIFO 1 */ +#define PCI_BT_V2 0x49 /* Video/FIFO 2 */ +#define PCI_BT_V3 0x4A /* Video/FIFO 3 */ +#define PCI_BT_DEBI 0x4B /* DEBI */ +#define PCI_BT_A 0x4C /* Audio */ + +#define DD1_INIT 0x50 /* Init setting of DD1 interface */ + +#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */ +#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */ + +#define BRS_CTRL 0x58 /* BRS control register */ +#define HPS_CTRL 0x5C /* HPS control register */ +#define HPS_V_SCALE 0x60 /* HPS vertical scale */ +#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */ +#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */ +#define HPS_H_SCALE 0x6C /* HPS horizontal scale */ +#define BCS_CTRL 0x70 /* BCS control */ +#define CHROMA_KEY_RANGE 0x74 +#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */ + +#define DEBI_CONFIG 0x7C +#define DEBI_COMMAND 0x80 +#define DEBI_PAGE 0x84 +#define DEBI_AD 0x88 + +#define I2C_TRANSFER 0x8C +#define I2C_STATUS 0x90 + +#define BASE_A1_IN 0x94 /* Audio 1 input DMA */ +#define PROT_A1_IN 0x98 +#define PAGE_A1_IN 0x9C + +#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */ +#define PROT_A1_OUT 0xA4 +#define PAGE_A1_OUT 0xA8 + +#define BASE_A2_IN 0xAC /* Audio 2 input DMA */ +#define PROT_A2_IN 0xB0 +#define PAGE_A2_IN 0xB4 + +#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */ +#define PROT_A2_OUT 0xBC +#define PAGE_A2_OUT 0xC0 + +#define RPS_PAGE0 0xC4 /* RPS task 0 page register */ +#define RPS_PAGE1 0xC8 /* RPS task 1 page register */ + +#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */ +#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */ + +#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */ +#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */ + +#define IER 0xDC /* Interrupt enable register */ + +#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */ + +#define EC1SSR 0xE4 /* Event cnt set 1 source select */ +#define EC2SSR 0xE8 /* Event cnt set 2 source select */ +#define ECT1R 0xEC /* Event cnt set 1 thresholds */ +#define ECT2R 0xF0 /* Event cnt set 2 thresholds */ + +#define ACON1 0xF4 +#define ACON2 0xF8 + +#define MC1 0xFC /* Main control register 1 */ +#define MC2 0x100 /* Main control register 2 */ + +#define RPS_ADDR0 0x104 /* RPS task 0 address register */ +#define RPS_ADDR1 0x108 /* RPS task 1 address register */ + +#define ISR 0x10C /* Interrupt status register */ +#define PSR 0x110 /* Primary status register */ +#define SSR 0x114 /* Secondary status register */ + +#define EC1R 0x118 /* Event counter set 1 register */ +#define EC2R 0x11C /* Event counter set 2 register */ + +#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */ +#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */ +#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */ +#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */ +#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */ +#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */ +#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */ +#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */ + +#define LEVEL_REP 0x140, +#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */ +#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */ + +/* isr masks */ +#define SPCI_PPEF 0x80000000 /* PCI parity error */ +#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */ +#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */ +#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */ +#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */ +#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */ +#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */ +#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */ +#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */ +#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */ +#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */ +#define SPCI_UPLD 0x00100000 /* RPS in upload */ +#define SPCI_DEBI_S 0x00080000 /* DEBI status */ +#define SPCI_DEBI_E 0x00040000 /* DEBI error */ +#define SPCI_IIC_S 0x00020000 /* I2C status */ +#define SPCI_IIC_E 0x00010000 /* I2C error */ +#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */ +#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */ +#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */ +#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */ +#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */ +#define SPCI_V_PE 0x00000400 /* Video protection address */ +#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */ +#define SPCI_FIDA 0x00000100 /* Field ID video port A */ +#define SPCI_FIDB 0x00000080 /* Field ID video port B */ +#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */ +#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */ +#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */ +#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */ +#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */ +#define SPCI_EC3S 0x00000002 /* Event counter 3 */ +#define SPCI_EC0S 0x00000001 /* Event counter 0 */ + +/* i2c */ +#define SAA7146_I2C_ABORT (1<<7) +#define SAA7146_I2C_SPERR (1<<6) +#define SAA7146_I2C_APERR (1<<5) +#define SAA7146_I2C_DTERR (1<<4) +#define SAA7146_I2C_DRERR (1<<3) +#define SAA7146_I2C_AL (1<<2) +#define SAA7146_I2C_ERR (1<<1) +#define SAA7146_I2C_BUSY (1<<0) + +#define SAA7146_I2C_START (0x3) +#define SAA7146_I2C_CONT (0x2) +#define SAA7146_I2C_STOP (0x1) +#define SAA7146_I2C_NOP (0x0) + +#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500) +#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100) +#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400) +#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600) +#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700) +#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000) +#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200) +#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300) + +static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) & ~y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) | y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +#endif |