diff options
Diffstat (limited to 'include/asm-m68knommu/MC68328.h')
| -rw-r--r-- | include/asm-m68knommu/MC68328.h | 1266 |
1 files changed, 0 insertions, 1266 deletions
diff --git a/include/asm-m68knommu/MC68328.h b/include/asm-m68knommu/MC68328.h deleted file mode 100644 index a337e56d09bf..000000000000 --- a/include/asm-m68knommu/MC68328.h +++ /dev/null @@ -1,1266 +0,0 @@ - -/* include/asm-m68knommu/MC68328.h: '328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * - */ - -#ifndef _MC68328_H_ -#define _MC68328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Mask Revision Register - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * Group Base Address Registers - */ -#define GRPBASEA_ADDR 0xfffff100 -#define GRPBASEB_ADDR 0xfffff102 -#define GRPBASEC_ADDR 0xfffff104 -#define GRPBASED_ADDR 0xfffff106 - -#define GRPBASEA WORD_REF(GRPBASEA_ADDR) -#define GRPBASEB WORD_REF(GRPBASEB_ADDR) -#define GRPBASEC WORD_REF(GRPBASEC_ADDR) -#define GRPBASED WORD_REF(GRPBASED_ADDR) - -#define GRPBASE_V 0x0001 /* Valid */ -#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ - -/* - * Group Base Address Mask Registers - */ -#define GRPMASKA_ADDR 0xfffff108 -#define GRPMASKB_ADDR 0xfffff10a -#define GRPMASKC_ADDR 0xfffff10c -#define GRPMASKD_ADDR 0xfffff10e - -#define GRPMASKA WORD_REF(GRPMASKA_ADDR) -#define GRPMASKB WORD_REF(GRPMASKB_ADDR) -#define GRPMASKC WORD_REF(GRPMASKC_ADDR) -#define GRPMASKD WORD_REF(GRPMASKD_ADDR) - -#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ - -/* - * Chip-Select Option Registers (group A) - */ -#define CSA0_ADDR 0xfffff110 -#define CSA1_ADDR 0xfffff114 -#define CSA2_ADDR 0xfffff118 -#define CSA3_ADDR 0xfffff11c - -#define CSA0 LONG_REF(CSA0_ADDR) -#define CSA1 LONG_REF(CSA1_ADDR) -#define CSA2 LONG_REF(CSA2_ADDR) -#define CSA3 LONG_REF(CSA3_ADDR) - -#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSA_WAIT_SHIFT 0 -#define CSA_RO 0x00000008 /* Read-Only */ -#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSA_AM_SHIFT 8 -#define CSA_BUSW 0x00010000 /* Bus Width Select */ -#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSA_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group B) - */ -#define CSB0_ADDR 0xfffff120 -#define CSB1_ADDR 0xfffff124 -#define CSB2_ADDR 0xfffff128 -#define CSB3_ADDR 0xfffff12c - -#define CSB0 LONG_REF(CSB0_ADDR) -#define CSB1 LONG_REF(CSB1_ADDR) -#define CSB2 LONG_REF(CSB2_ADDR) -#define CSB3 LONG_REF(CSB3_ADDR) - -#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSB_WAIT_SHIFT 0 -#define CSB_RO 0x00000008 /* Read-Only */ -#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSB_AM_SHIFT 8 -#define CSB_BUSW 0x00010000 /* Bus Width Select */ -#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSB_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group C) - */ -#define CSC0_ADDR 0xfffff130 -#define CSC1_ADDR 0xfffff134 -#define CSC2_ADDR 0xfffff138 -#define CSC3_ADDR 0xfffff13c - -#define CSC0 LONG_REF(CSC0_ADDR) -#define CSC1 LONG_REF(CSC1_ADDR) -#define CSC2 LONG_REF(CSC2_ADDR) -#define CSC3 LONG_REF(CSC3_ADDR) - -#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSC_WAIT_SHIFT 0 -#define CSC_RO 0x00000008 /* Read-Only */ -#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSC_AM_SHIFT 4 -#define CSC_BUSW 0x00010000 /* Bus Width Select */ -#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSC_AC_SHIFT 20 - -/* - * Chip-Select Option Registers (group D) - */ -#define CSD0_ADDR 0xfffff140 -#define CSD1_ADDR 0xfffff144 -#define CSD2_ADDR 0xfffff148 -#define CSD3_ADDR 0xfffff14c - -#define CSD0 LONG_REF(CSD0_ADDR) -#define CSD1 LONG_REF(CSD1_ADDR) -#define CSD2 LONG_REF(CSD2_ADDR) -#define CSD3 LONG_REF(CSD3_ADDR) - -#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSD_WAIT_SHIFT 0 -#define CSD_RO 0x00000008 /* Read-Only */ -#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSD_AM_SHIFT 4 -#define CSD_BUSW 0x00010000 /* Bus Width Select */ -#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSD_AC_SHIFT 20 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_PIXCLK_SEL_SHIFT 11 - -/* 'EZ328-compatible definitions */ -#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK -#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADRR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ -#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define INT4_IRQ_NUM 12 /* External INT4 */ -#define INT5_IRQ_NUM 13 /* External INT5 */ -#define INT6_IRQ_NUM 14 /* External INT6 */ -#define INT7_IRQ_NUM 15 /* External INT7 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define PEN_IRQ_NUM 20 /* Pen Interrupt */ -#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ -#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ -#define IRQ7_IRQ_NUM 23 /* IRQ7 */ - -/* '328-compatible definitions */ -#define SPI_IRQ_NUM SPIM_IRQ_NUM -#define TMR_IRQ_NUM TMR1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ -#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ -#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ -#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ -#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ -#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ -#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ -#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IMR_MSPI IMR_MSPIM -#define IMR_MTMR IMR_MTMR1 - -/* - * Interrupt Wake-Up Enable Register - */ -#define IWR_ADDR 0xfffff308 -#define IWR LONG_REF(IWR_ADDR) - -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define ISR_SPI ISR_SPIM -#define ISR_TMR ISR_TMR1 - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff310 -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IPR_SPI IPR_SPIM -#define IPR_TMR IPR_TMR1 - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PASEL_ADDR 0xfffff403 /* Port A Select register */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PASEL BYTE_REF(PASEL_ADDR) - -#define PA(x) (1 << (x)) -#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ - -#define PA_A16 PA(0) /* Use A16 as PA(0) */ -#define PA_A17 PA(1) /* Use A17 as PA(1) */ -#define PA_A18 PA(2) /* Use A18 as PA(2) */ -#define PA_A19 PA(3) /* Use A19 as PA(3) */ -#define PA_A20 PA(4) /* Use A20 as PA(4) */ -#define PA_A21 PA(5) /* Use A21 as PA(5) */ -#define PA_A22 PA(6) /* Use A22 as PA(6) */ -#define PA_A23 PA(7) /* Use A23 as PA(7) */ - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) -#define PB_D(x) PB(x) /* This is specific to port B only */ - -#define PB_D0 PB(0) /* Use D0 as PB(0) */ -#define PB_D1 PB(1) /* Use D1 as PB(1) */ -#define PB_D2 PB(2) /* Use D2 as PB(2) */ -#define PB_D3 PB(3) /* Use D3 as PB(3) */ -#define PB_D4 PB(4) /* Use D4 as PB(4) */ -#define PB_D5 PB(5) /* Use D5 as PB(5) */ -#define PB_D6 PB(6) /* Use D6 as PB(6) */ -#define PB_D7 PB(7) /* Use D7 as PB(7) */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_WE PC(6) /* Use WE as PC(6) */ -#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ -#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ -#define PC_LDS PC(2) /* Use LDS as PC(2) */ -#define PC_UDS PC(1) /* Use UDS as PC(1) */ -#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) -#define PD_KB(x) PD(x) /* This is specific for Port D only */ - -#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ -#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ -#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ -#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ -#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ -#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ -#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ -#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ -#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ -#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ -#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ -#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ -#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ -#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) -#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ - -#define PF_A24 PF(0) /* Use A24 as PF(0) */ -#define PF_A25 PF(1) /* Use A25 as PF(1) */ -#define PF_A26 PF(2) /* Use A26 as PF(2) */ -#define PF_A27 PF(3) /* Use A27 as PF(3) */ -#define PF_A28 PF(4) /* Use A28 as PF(4) */ -#define PF_A29 PF(5) /* Use A29 as PF(5) */ -#define PF_A30 PF(6) /* Use A30 as PF(6) */ -#define PF_A31 PF(7) /* Use A31 as PF(7) */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ -#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ -#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ -#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ -#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ -#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ -#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ -#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff439 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_PWMEN 0x0010 /* Enable PWM */ -#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ -#define PWMC_PIN 0x0080 /* Current PWM output pin status */ -#define PWMC_LOAD 0x0100 /* Force a new period */ -#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* 'EZ328-compatible definitions */ -#define PWMC_EN PWMC_PWMEN - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff502 -#define PWMP WORD_REF(PWMP_ADDR) - -/* - * PWM Width Register - */ -#define PWMW_ADDR 0xfffff504 -#define PWMW WORD_REF(PWMW_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff506 -#define PWMCNT WORD_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timers - * - **********/ - -/* - * Timer Unit 1 and 2 Control Registers - */ -#define TCTL1_ADDR 0xfffff600 -#define TCTL1 WORD_REF(TCTL1_ADDR) -#define TCTL2_ADDR 0xfffff60c -#define TCTL2 WORD_REF(TCTL2_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* 'EZ328-compatible definitions */ -#define TCTL_ADDR TCTL1_ADDR -#define TCTL TCTL1 - -/* - * Timer Unit 1 and 2 Prescaler Registers - */ -#define TPRER1_ADDR 0xfffff602 -#define TPRER1 WORD_REF(TPRER1_ADDR) -#define TPRER2_ADDR 0xfffff60e -#define TPRER2 WORD_REF(TPRER2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TPRER_ADDR TPRER1_ADDR -#define TPRER TPRER1 - -/* - * Timer Unit 1 and 2 Compare Registers - */ -#define TCMP1_ADDR 0xfffff604 -#define TCMP1 WORD_REF(TCMP1_ADDR) -#define TCMP2_ADDR 0xfffff610 -#define TCMP2 WORD_REF(TCMP2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCMP_ADDR TCMP1_ADDR -#define TCMP TCMP1 - -/* - * Timer Unit 1 and 2 Capture Registers - */ -#define TCR1_ADDR 0xfffff606 -#define TCR1 WORD_REF(TCR1_ADDR) -#define TCR2_ADDR 0xfffff612 -#define TCR2 WORD_REF(TCR2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCR_ADDR TCR1_ADDR -#define TCR TCR1 - -/* - * Timer Unit 1 and 2 Counter Registers - */ -#define TCN1_ADDR 0xfffff608 -#define TCN1 WORD_REF(TCN1_ADDR) -#define TCN2_ADDR 0xfffff614 -#define TCN2 WORD_REF(TCN2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCN_ADDR TCN1_ADDR -#define TCN TCN - -/* - * Timer Unit 1 and 2 Status Registers - */ -#define TSTAT1_ADDR 0xfffff60a -#define TSTAT1 WORD_REF(TSTAT1_ADDR) -#define TSTAT2_ADDR 0xfffff616 -#define TSTAT2 WORD_REF(TSTAT2_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* 'EZ328-compatible definitions */ -#define TSTAT_ADDR TSTAT1_ADDR -#define TSTAT TSTAT1 - -/* - * Watchdog Compare Register - */ -#define WRR_ADDR 0xfffff61a -#define WRR WORD_REF(WRR_ADDR) - -/* - * Watchdog Counter Register - */ -#define WCN_ADDR 0xfffff61c -#define WCN WORD_REF(WCN_ADDR) - -/* - * Watchdog Control and Status Register - */ -#define WCSR_ADDR 0xfffff618 -#define WCSR WORD_REF(WCSR_ADDR) - -#define WCSR_WDEN 0x0001 /* Watchdog Enable */ -#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ -#define WCSR_WRST 0x0004 /* Watchdog Reset */ - -/********** - * - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) - * - **********/ - -/* - * SPI Slave Register - */ -#define SPISR_ADDR 0xfffff700 -#define SPISR WORD_REF(SPISR_ADDR) - -#define SPISR_DATA_ADDR 0xfffff701 -#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) - -#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ -#define SPISR_DATA_SHIFT 0 -#define SPISR_SPISEN 0x0100 /* SPIS module enable */ -#define SPISR_POL 0x0200 /* SPSCLK polarity control */ -#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ -#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ -#define SPISR_DATARDY 0x1000 /* Data ready */ -#define SPISR_ENPOL 0x2000 /* Enable Polarity */ -#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ -#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* 'EZ328-compatible definitions */ -#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ -#define SPIMCONT_ENABLE SPIMCONT_SPIMEN -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ -#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ -#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ -#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ -#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ -#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UARTEN 0x8000 /* UART Enable */ - -/* 'EZ328-compatible definitions */ -#define USTCNT_TXAE USTCNT_TXAVAILEN -#define USTCNT_TXHE USTCNT_TXHALFEN -#define USTCNT_TXEE USTCNT_TXEMPTYEN -#define USTCNT_RXRE USTCNT_RXREADYEN -#define USTCNT_RXHE USTCNT_RXHALFEN -#define USTCNT_RXFE USTCNT_RXFULLEN -#define USTCNT_CTSD USTCNT_CTSDELTAEN -#define USTCNT_ODD USTCNT_ODD_EVEN -#define USTCNT_PEN USTCNT_PARITYEN -#define USTCNT_CLKM USTCNT_CLKMODE -#define USTCNT_UEN USTCNT_UARTEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ -#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ -#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ -#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STATUS 0x0200 /* CTS State */ -#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* 'EZ328-compatible definitions */ -#define UTX_CTS_STAT UTX_CTS_STATUS -#define UTX_NOCTS UTX_IGNORE_CTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int pad1; - volatile unsigned short int pad2; - volatile unsigned short int pad3; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with 'EZ328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x02 -#define LPICF_PBSIZ_4 0x04 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ -#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ -#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 2 -#define LCKCON_DMA16 0x40 /* DMA burst length */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* 'EZ328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Last Buffer Address Register - */ -#define LLBAR_ADDR 0xfffffa29 -#define LLBAR BYTE_REF(LLBAR_ADDR) - -#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ -#define LLBAR_LBAR_SHIFT 0 - -/* - * LCD Octet Terminal Count Register - */ -#define LOTCR_ADDR 0xfffffa2b -#define LOTCR BYTE_REF(LOTCR_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ -#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa32 -#define LGPMR WORD_REF(LGPMR_ADDR) - -#define LGPMR_GLEVEL3_MASK 0x000f -#define LGPMR_GLEVEL3_SHIFT 0 -#define LGPMR_GLEVEL2_MASK 0x00f0 -#define LGPMR_GLEVEL2_SHIFT 4 -#define LGPMR_GLEVEL0_MASK 0x0f00 -#define LGPMR_GLEVEL0_SHIFT 8 -#define LGPMR_GLEVEL1_MASK 0xf000 -#define LGPMR_GLEVEL1_SHIFT 12 - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_384 0x0020 /* Crystal Selection */ -#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ - -/* 'EZ328-compatible definitions */ -#define RTCCTL_XTL RTCCTL_384 -#define RTCCTL_EN RTCCTL_ENABLE - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -#endif /* _MC68328_H_ */ |