diff options
Diffstat (limited to 'drivers')
31 files changed, 915 insertions, 1001 deletions
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c index 7195c9461524..b1a9c4cdec93 100644 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ b/drivers/media/dvb/dvb-usb/af9005-fe.c @@ -29,8 +29,6 @@ struct af9005_fe_state { struct dvb_usb_device *d; - struct dvb_frontend *tuner; - fe_status_t stat; /* retraining parameters */ @@ -345,8 +343,8 @@ static int af9005_reset_pre_viterbi(struct dvb_frontend *fe) 1 & 0xff); if (ret) return ret; - af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, - 1 >> 8); + ret = af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, + 1 >> 8); if (ret) return ret; /* reset pre viterbi error count */ @@ -447,7 +445,7 @@ static int af9005_fe_read_status(struct dvb_frontend *fe, fe_status_t * stat) u8 temp; int ret; - if (state->tuner == NULL) + if (fe->ops.tuner_ops.release == NULL) return -ENODEV; *stat = 0; @@ -493,7 +491,7 @@ static int af9005_fe_read_status(struct dvb_frontend *fe, fe_status_t * stat) static int af9005_fe_read_ber(struct dvb_frontend *fe, u32 * ber) { struct af9005_fe_state *state = fe->demodulator_priv; - if (state->tuner == NULL) + if (fe->ops.tuner_ops.release == NULL) return -ENODEV; af9005_fe_refresh_state(fe); *ber = state->ber; @@ -503,7 +501,7 @@ static int af9005_fe_read_ber(struct dvb_frontend *fe, u32 * ber) static int af9005_fe_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) { struct af9005_fe_state *state = fe->demodulator_priv; - if (state->tuner == NULL) + if (fe->ops.tuner_ops.release == NULL) return -ENODEV; af9005_fe_refresh_state(fe); *unc = state->unc; @@ -517,7 +515,7 @@ static int af9005_fe_read_signal_strength(struct dvb_frontend *fe, int ret; u8 if_gain, rf_gain; - if (state->tuner == NULL) + if (fe->ops.tuner_ops.release == NULL) return -ENODEV; ret = af9005_read_ofdm_register(state->d, xd_r_reg_aagc_rf_gain, @@ -881,10 +879,8 @@ static int af9005_fe_init(struct dvb_frontend *fe) af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, reg_ofdm_rst_pos, reg_ofdm_rst_len, 1))) return ret; - if ((ret = - af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, - reg_ofdm_rst_pos, reg_ofdm_rst_len, 0))) - return ret; + ret = af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, + reg_ofdm_rst_pos, reg_ofdm_rst_len, 0); if (ret) return ret; @@ -1041,7 +1037,7 @@ static int af9005_fe_init(struct dvb_frontend *fe) return ret; /* attach tuner and init */ - if (state->tuner == NULL) { + if (fe->ops.tuner_ops.release == NULL) { /* read tuner and board id from eeprom */ ret = af9005_read_eeprom(adap->dev, 0xc6, buf, 2); if (ret) { @@ -1058,20 +1054,16 @@ static int af9005_fe_init(struct dvb_frontend *fe) return ret; } if1 = (u16) (buf[0] << 8) + buf[1]; - state->tuner = - dvb_attach(mt2060_attach, fe, &adap->dev->i2c_adap, - &af9005_mt2060_config, if1); - if (state->tuner == NULL) { + if (dvb_attach(mt2060_attach, fe, &adap->dev->i2c_adap, + &af9005_mt2060_config, if1) == NULL) { deb_info("MT2060 attach failed\n"); return -ENODEV; } break; case 3: /* QT1010 */ case 9: /* QT1010B */ - state->tuner = - dvb_attach(qt1010_attach, fe, &adap->dev->i2c_adap, - &af9005_qt1010_config); - if (state->tuner == NULL) { + if (dvb_attach(qt1010_attach, fe, &adap->dev->i2c_adap, + &af9005_qt1010_config) ==NULL) { deb_info("QT1010 attach failed\n"); return -ENODEV; } @@ -1080,7 +1072,7 @@ static int af9005_fe_init(struct dvb_frontend *fe) err("Unsupported tuner type %d", buf[0]); return -ENODEV; } - ret = state->tuner->ops.tuner_ops.init(state->tuner); + ret = fe->ops.tuner_ops.init(fe); if (ret) return ret; } @@ -1118,7 +1110,7 @@ static int af9005_fe_set_frontend(struct dvb_frontend *fe, deb_info("af9005_fe_set_frontend freq %d bw %d\n", fep->frequency, fep->u.ofdm.bandwidth); - if (state->tuner == NULL) { + if (fe->ops.tuner_ops.release == NULL) { err("Tuner not attached"); return -ENODEV; } @@ -1199,7 +1191,7 @@ static int af9005_fe_set_frontend(struct dvb_frontend *fe, return ret; /* set tuner */ deb_info("set tuner\n"); - ret = state->tuner->ops.tuner_ops.set_params(state->tuner, fep); + ret = fe->ops.tuner_ops.set_params(fe, fep); if (ret) return ret; @@ -1435,12 +1427,6 @@ static void af9005_fe_release(struct dvb_frontend *fe) { struct af9005_fe_state *state = (struct af9005_fe_state *)fe->demodulator_priv; - if (state->tuner != NULL && state->tuner->ops.tuner_ops.release != NULL) { - state->tuner->ops.tuner_ops.release(state->tuner); -#ifdef CONFIG_DVB_CORE_ATTACH - symbol_put_addr(state->tuner->ops.tuner_ops.release); -#endif - } kfree(state); } @@ -1458,7 +1444,6 @@ struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d) deb_info("attaching frontend af9005\n"); state->d = d; - state->tuner = NULL; state->opened = 0; memcpy(&state->frontend.ops, &af9005_fe_ops, diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 0c0b94767bc1..ca99e439c97c 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -501,7 +501,7 @@ static struct dvb_pll_desc dvb_pll_opera1 = { /* Philips FCV1236D */ -struct dvb_pll_desc dvb_pll_fcv1236d = { +static struct dvb_pll_desc dvb_pll_fcv1236d = { /* Bit_0: RF Input select * Bit_1: 0=digital, 1=analog */ diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 387cb2122d4f..f6715007d409 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/vmalloc.h> #include <linux/firmware.h> +#include <net/checksum.h> #include <asm/io.h> @@ -45,7 +46,7 @@ static void boot_msp34xx(struct bttv *btv, int pin); static void boot_bt832(struct bttv *btv); static void hauppauge_eeprom(struct bttv *btv); static void avermedia_eeprom(struct bttv *btv); -static void osprey_eeprom(struct bttv *btv); +static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); static void modtec_eeprom(struct bttv *btv); static void init_PXC200(struct bttv *btv); static void init_RTV24(struct bttv *btv); @@ -2843,13 +2844,28 @@ struct tvcard bttv_tvcards[] = { .has_remote = 1, }, /* ---- card 0x8c ---------------------------------- */ + /* Has four Bt878 chips behind a PCI bridge, each chip has: + one external BNC composite input (mux 2) + three internal composite inputs (unknown muxes) + an 18-bit stereo A/D (CS5331A), which has: + one external stereo unblanced (RCA) audio connection + one (or 3?) internal stereo balanced (XLR) audio connection + input is selected via gpio to a 14052B mux + (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) + gain is controlled via an X9221A chip on the I2C bus @0x28 + sample rate is controlled via gpio to an MK1413S + (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) + There is neither a tuner nor an svideo input. */ [BTTV_BOARD_OSPREY440] = { .name = "Osprey 440", - .video_inputs = 1, - .audio_inputs = 1, + .video_inputs = 4, + .audio_inputs = 2, /* this is meaningless */ .tuner = UNSET, - .svhs = 1, - .muxsel = { 2 }, + .svhs = UNSET, + .muxsel = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */ + .gpiomask = 0x303, + .gpiomute = 0x000, /* int + 32kHz */ + .gpiomux = { 0, 0, 0x000, 0x100}, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -3453,11 +3469,12 @@ void __devinit bttv_init_card2(struct bttv *btv) case BTTV_BOARD_OSPREY2xx: case BTTV_BOARD_OSPREY2x0_SVID: case BTTV_BOARD_OSPREY2x0: + case BTTV_BOARD_OSPREY440: case BTTV_BOARD_OSPREY500: case BTTV_BOARD_OSPREY540: case BTTV_BOARD_OSPREY2000: bttv_readee(btv,eeprom_data,0xa0); - osprey_eeprom(btv); + osprey_eeprom(btv, eeprom_data); break; case BTTV_BOARD_IDS_EAGLE: init_ids_eagle(btv); @@ -3748,106 +3765,119 @@ static int __devinit pvr_boot(struct bttv *btv) /* ----------------------------------------------------------------------- */ /* some osprey specific stuff */ -static void __devinit osprey_eeprom(struct bttv *btv) +static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) { - int i = 0; - unsigned char *ee = eeprom_data; - unsigned long serial = 0; - - if (btv->c.type == 0) { - /* this might be an antique... check for MMAC label in eeprom */ - if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) { - unsigned char checksum = 0; - for (i = 0; i < 21; i++) - checksum += ee[i]; - if (checksum != ee[21]) - return; - btv->c.type = BTTV_BOARD_OSPREY1x0_848; - for (i = 12; i < 21; i++) - serial *= 10, serial += ee[i] - '0'; - } + int i; + u32 serial = 0; + int cardid = -1; + + /* This code will nevery actually get called in this case.... */ + if (btv->c.type == BTTV_BOARD_UNKNOWN) { + /* this might be an antique... check for MMAC label in eeprom */ + if (!strncmp(ee, "MMAC", 4)) { + u8 checksum = 0; + for (i = 0; i < 21; i++) + checksum += ee[i]; + if (checksum != ee[21]) + return; + cardid = BTTV_BOARD_OSPREY1x0_848; + for (i = 12; i < 21; i++) + serial *= 10, serial += ee[i] - '0'; + } } else { - unsigned short type; - int offset = 4*16; - - for (; offset < 8*16; offset += 16) { - unsigned short checksum = 0; - /* verify the checksum */ - for (i = 0; i < 14; i++) - checksum += ee[i+offset]; - checksum = ~checksum; /* no idea why */ - if ((((checksum>>8)&0x0FF) == ee[offset+14]) && - ((checksum & 0x0FF) == ee[offset+15])) { - break; - } - } - - if (offset >= 8*16) - return; - - /* found a valid descriptor */ - type = (ee[offset+4]<<8) | (ee[offset+5]); - - switch(type) { - /* 848 based */ - case 0x0004: - btv->c.type = BTTV_BOARD_OSPREY1x0_848; - break; - case 0x0005: - btv->c.type = BTTV_BOARD_OSPREY101_848; - break; - - /* 878 based */ - case 0x0012: - case 0x0013: - btv->c.type = BTTV_BOARD_OSPREY1x0; - break; - case 0x0014: - case 0x0015: - btv->c.type = BTTV_BOARD_OSPREY1x1; - break; - case 0x0016: - case 0x0017: - case 0x0020: - btv->c.type = BTTV_BOARD_OSPREY1x1_SVID; - break; - case 0x0018: - case 0x0019: - case 0x001E: - case 0x001F: - btv->c.type = BTTV_BOARD_OSPREY2xx; - break; - case 0x001A: - case 0x001B: - btv->c.type = BTTV_BOARD_OSPREY2x0_SVID; - break; - case 0x0040: - btv->c.type = BTTV_BOARD_OSPREY500; - break; - case 0x0050: - case 0x0056: - btv->c.type = BTTV_BOARD_OSPREY540; - /* bttv_osprey_540_init(btv); */ - break; - case 0x0060: - case 0x0070: - case 0x00A0: - btv->c.type = BTTV_BOARD_OSPREY2x0; - /* enable output on select control lines */ - gpio_inout(0xffffff,0x000303); - break; - default: - /* unknown...leave generic, but get serial # */ - break; - } - serial = (ee[offset+6] << 24) - | (ee[offset+7] << 16) - | (ee[offset+8] << 8) - | (ee[offset+9]); - } - - printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n", - btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial); + unsigned short type; + + for (i = 4*16; i < 8*16; i += 16) { + u16 checksum = ip_compute_csum(ee + i, 16); + + if ((checksum&0xff) + (checksum>>8) == 0xff) + break; + } + if (i >= 8*16) + return; + ee += i; + + /* found a valid descriptor */ + type = be16_to_cpup((u16*)(ee+4)); + + switch(type) { + /* 848 based */ + case 0x0004: + cardid = BTTV_BOARD_OSPREY1x0_848; + break; + case 0x0005: + cardid = BTTV_BOARD_OSPREY101_848; + break; + + /* 878 based */ + case 0x0012: + case 0x0013: + cardid = BTTV_BOARD_OSPREY1x0; + break; + case 0x0014: + case 0x0015: + cardid = BTTV_BOARD_OSPREY1x1; + break; + case 0x0016: + case 0x0017: + case 0x0020: + cardid = BTTV_BOARD_OSPREY1x1_SVID; + break; + case 0x0018: + case 0x0019: + case 0x001E: + case 0x001F: + cardid = BTTV_BOARD_OSPREY2xx; + break; + case 0x001A: + case 0x001B: + cardid = BTTV_BOARD_OSPREY2x0_SVID; + break; + case 0x0040: + cardid = BTTV_BOARD_OSPREY500; + break; + case 0x0050: + case 0x0056: + cardid = BTTV_BOARD_OSPREY540; + /* bttv_osprey_540_init(btv); */ + break; + case 0x0060: + case 0x0070: + case 0x00A0: + cardid = BTTV_BOARD_OSPREY2x0; + /* enable output on select control lines */ + gpio_inout(0xffffff,0x000303); + break; + case 0x00D8: + cardid = BTTV_BOARD_OSPREY440; + break; + default: + /* unknown...leave generic, but get serial # */ + printk(KERN_INFO "bttv%d: " + "osprey eeprom: unknown card type 0x%04x\n", + btv->c.nr, type); + break; + } + serial = be32_to_cpup((u32*)(ee+6)); + } + + printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", + btv->c.nr, cardid, + cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial); + + if (cardid<0 || btv->c.type == cardid) + return; + + /* card type isn't set correctly */ + if (card[btv->c.nr] < bttv_num_tvcards) { + printk(KERN_WARNING "bttv%d: osprey eeprom: " + "Not overriding user specified card type\n", btv->c.nr); + } else { + printk(KERN_INFO "bttv%d: osprey eeprom: " + "Changing card type from %d to %d\n", btv->c.nr, + btv->c.type, cardid); + btv->c.type = cardid; + } } /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 91b588d261ae..8abb34a35816 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -417,6 +417,7 @@ struct ivtv_mailbox_data { #define IVTV_F_I_WORK_HANDLER_YUV 17 /* there is work to be done for YUV */ #define IVTV_F_I_WORK_HANDLER_PIO 18 /* there is work to be done for PIO */ #define IVTV_F_I_PIO 19 /* PIO in progress */ +#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */ /* Event notifications */ #define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */ diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 8e97a938398f..5dd519caf81d 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -757,6 +757,7 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts) itv->output_mode = OUT_NONE; itv->speed = 0; + clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); ivtv_release_stream(s); } @@ -799,7 +800,16 @@ int ivtv_v4l2_close(struct inode *inode, struct file *filp) ivtv_unmute(itv); ivtv_release_stream(s); } else if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) { + struct ivtv_stream *s_vout = &itv->streams[IVTV_DEC_STREAM_TYPE_VOUT]; + ivtv_stop_decoding(id, VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0); + + /* If all output streams are closed, and if the user doesn't have + IVTV_DEC_STREAM_TYPE_VOUT open, then disable VBI on TV-out. */ + if (itv->output_mode == OUT_NONE && !test_bit(IVTV_F_S_APPL_IO, &s_vout->s_flags)) { + /* disable VBI on TV-out */ + ivtv_disable_vbi(itv); + } } else { ivtv_stop_capture(id, 0); } diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c index d0feabf93080..425eb1063904 100644 --- a/drivers/media/video/ivtv/ivtv-firmware.c +++ b/drivers/media/video/ivtv/ivtv-firmware.c @@ -72,8 +72,8 @@ retry: dst++; src++; } - release_firmware(fw); IVTV_INFO("Loaded %s firmware (%zd bytes)\n", fn, fw->size); + release_firmware(fw); return size; } IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 4773453e8dab..047624b9e271 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -285,6 +285,10 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, if (ivtv_set_output_mode(itv, OUT_MPG) != OUT_MPG) return -EBUSY; + if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { + /* forces ivtv_set_speed to be called */ + itv->speed = 0; + } return ivtv_start_decoding(id, vc->play.speed); } @@ -309,6 +313,7 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, if (atomic_read(&itv->decoding) > 0) { ivtv_vapi(itv, CX2341X_DEC_PAUSE_PLAYBACK, 1, (vc->flags & VIDEO_CMD_FREEZE_TO_BLACK) ? 1 : 0); + set_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); } break; @@ -317,8 +322,10 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, if (try) break; if (itv->output_mode != OUT_MPG) return -EBUSY; - if (atomic_read(&itv->decoding) > 0) { - ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, 0, 0); + if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { + int speed = itv->speed; + itv->speed = 0; + return ivtv_start_decoding(id, speed); } break; diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c index 814a673712b3..5e3b679202ae 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.c +++ b/drivers/media/video/ivtv/ivtv-mailbox.c @@ -40,6 +40,7 @@ #define API_HIGH_VOL (1 << 5) /* High volume command (i.e. called during encoding or decoding) */ #define API_NO_WAIT_MB (1 << 4) /* Command may not wait for a free mailbox */ #define API_NO_WAIT_RES (1 << 5) /* Command may not wait for the result */ +#define API_NO_POLL (1 << 6) /* Avoid pointless polling */ struct ivtv_api_info { int flags; /* Flags, see above */ @@ -51,7 +52,7 @@ struct ivtv_api_info { static const struct ivtv_api_info api_info[256] = { /* MPEG encoder API */ API_ENTRY(CX2341X_ENC_PING_FW, API_FAST_RESULT), - API_ENTRY(CX2341X_ENC_START_CAPTURE, API_RESULT), + API_ENTRY(CX2341X_ENC_START_CAPTURE, API_RESULT | API_NO_POLL), API_ENTRY(CX2341X_ENC_STOP_CAPTURE, API_RESULT), API_ENTRY(CX2341X_ENC_SET_AUDIO_ID, API_CACHE), API_ENTRY(CX2341X_ENC_SET_VIDEO_ID, API_CACHE), @@ -96,7 +97,7 @@ static const struct ivtv_api_info api_info[256] = { /* MPEG decoder API */ API_ENTRY(CX2341X_DEC_PING_FW, API_FAST_RESULT), - API_ENTRY(CX2341X_DEC_START_PLAYBACK, API_RESULT), + API_ENTRY(CX2341X_DEC_START_PLAYBACK, API_RESULT | API_NO_POLL), API_ENTRY(CX2341X_DEC_STOP_PLAYBACK, API_RESULT), API_ENTRY(CX2341X_DEC_SET_PLAYBACK_SPEED, API_RESULT), API_ENTRY(CX2341X_DEC_STEP_VIDEO, API_RESULT), @@ -290,6 +291,13 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) /* Get results */ then = jiffies; + if (!(flags & API_NO_POLL)) { + /* First try to poll, then switch to delays */ + for (i = 0; i < 100; i++) { + if (readl(&mbox->flags) & IVTV_MBOX_FIRMWARE_DONE) + break; + } + } while (!(readl(&mbox->flags) & IVTV_MBOX_FIRMWARE_DONE)) { if (jiffies - then > api_timeout) { IVTV_DEBUG_WARN("Could not get result (%s)\n", api_info[cmd].name); @@ -301,7 +309,7 @@ static int ivtv_api_call(struct ivtv *itv, int cmd, int args, u32 data[]) if (flags & API_NO_WAIT_RES) mdelay(1); else - ivtv_msleep_timeout(10, 0); + ivtv_msleep_timeout(1, 0); } if (jiffies - then > msecs_to_jiffies(100)) IVTV_DEBUG_WARN("%s took %u jiffies\n", diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 322b347b67c2..51df3f855031 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -603,10 +603,6 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s) IVTV_DEBUG_INFO("Setting some initial decoder settings\n"); - /* disable VBI signals, if the MPEG stream contains VBI data, - then that data will be processed automatically for you. */ - ivtv_disable_vbi(itv); - /* set audio mode to left/stereo for dual/stereo mode. */ ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); @@ -639,7 +635,7 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s) } if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype, itv->params.width, itv->params.height, itv->params.audio_properties)) { - IVTV_DEBUG_WARN("COULDN'T INITIALIZE DECODER SOURCE\n"); + IVTV_DEBUG_WARN("Couldn't initialize decoder source\n"); } return 0; } @@ -909,11 +905,6 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) clear_bit(IVTV_F_S_STREAMING, &s->s_flags); ivtv_flush_queues(s); - if (!test_bit(IVTV_F_S_PASSTHROUGH, &s->s_flags)) { - /* disable VBI on TV-out */ - ivtv_disable_vbi(itv); - } - /* decrement decoding */ atomic_dec(&itv->decoding); diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 868b6886fe7f..e3371f972240 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -517,6 +517,7 @@ static int vidioc_g_register (struct file *file, void *priv, __FUNCTION__, errCode); return errCode; } + reg->val = errCode; return 0; } @@ -531,8 +532,8 @@ static int vidioc_s_register (struct file *file, void *priv, if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) return -EINVAL; /* NT100x has a 8-bit register space */ - reg->val = (u8)usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); - if (reg->val < 0) { + errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); + if (errCode < 0) { err("%s: VIDIOC_DBG_S_REGISTER failed: error %d", __FUNCTION__, errCode); return errCode; diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 8fb4a3414e0a..937c4a616c0e 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -240,11 +240,16 @@ enum gpcs_type { struct zoran_format { char *name; +#ifdef CONFIG_VIDEO_V4L1_COMPAT int palette; +#endif +#ifdef CONFIG_VIDEO_V4L2 __u32 fourcc; int colorspace; +#endif int depth; __u32 flags; + __u32 vfespfr; }; /* flags */ #define ZORAN_FORMAT_COMPRESSED 1<<0 diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index b0752767ee4f..ba2f4ed29483 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -429,8 +429,6 @@ zr36057_set_vfe (struct zoran *zr, reg |= (HorDcm << ZR36057_VFESPFR_HorDcm); reg |= (VerDcm << ZR36057_VFESPFR_VerDcm); reg |= (DispMode << ZR36057_VFESPFR_DispMode); - if (format->palette != VIDEO_PALETTE_YUV422 && format->palette != VIDEO_PALETTE_YUYV) - reg |= ZR36057_VFESPFR_LittleEndian; /* RJ: I don't know, why the following has to be the opposite * of the corresponding ZR36060 setting, but only this way * we get the correct colors when uncompressing to the screen */ @@ -439,36 +437,6 @@ zr36057_set_vfe (struct zoran *zr, if (zr->norm != VIDEO_MODE_NTSC) reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang reg |= ZR36057_VFESPFR_TopField; - switch (format->palette) { - - case VIDEO_PALETTE_YUYV: - case VIDEO_PALETTE_YUV422: - reg |= ZR36057_VFESPFR_YUV422; - break; - - case VIDEO_PALETTE_RGB555: - reg |= ZR36057_VFESPFR_RGB555 | ZR36057_VFESPFR_ErrDif; - break; - - case VIDEO_PALETTE_RGB565: - reg |= ZR36057_VFESPFR_RGB565 | ZR36057_VFESPFR_ErrDif; - break; - - case VIDEO_PALETTE_RGB24: - reg |= ZR36057_VFESPFR_RGB888 | ZR36057_VFESPFR_Pack24; - break; - - case VIDEO_PALETTE_RGB32: - reg |= ZR36057_VFESPFR_RGB888; - break; - - default: - dprintk(1, - KERN_INFO "%s: set_vfe() - unknown color_fmt=%x\n", - ZR_DEVNAME(zr), format->palette); - return; - - } if (HorDcm >= 48) { reg |= 3 << ZR36057_VFESPFR_HFilter; /* 5 tap filter */ } else if (HorDcm >= 32) { @@ -476,6 +444,7 @@ zr36057_set_vfe (struct zoran *zr, } else if (HorDcm >= 16) { reg |= 1 << ZR36057_VFESPFR_HFilter; /* 3 tap filter */ } + reg |= format->vfespfr; btwrite(reg, ZR36057_VFESPFR); /* display configuration */ @@ -651,11 +620,17 @@ zr36057_set_memgrab (struct zoran *zr, int mode) { if (mode) { - if (btread(ZR36057_VSSFGR) & - (ZR36057_VSSFGR_SnapShot | ZR36057_VSSFGR_FrameGrab)) + /* We only check SnapShot and not FrameGrab here. SnapShot==1 + * means a capture is already in progress, but FrameGrab==1 + * doesn't necessary mean that. It's more correct to say a 1 + * to 0 transition indicates a capture completed. If a + * capture is pending when capturing is tuned off, FrameGrab + * will be stuck at 1 until capturing is turned back on. + */ + if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) dprintk(1, KERN_WARNING - "%s: zr36057_set_memgrab(1) with SnapShot or FrameGrab on!?\n", + "%s: zr36057_set_memgrab(1) with SnapShot on!?\n", ZR_DEVNAME(zr)); /* switch on VSync interrupts */ @@ -672,11 +647,12 @@ zr36057_set_memgrab (struct zoran *zr, zr->v4l_memgrab_active = 1; } else { - zr->v4l_memgrab_active = 0; - /* switch off VSync interrupts */ btand(~zr->card.vsync_int, ZR36057_ICR); // SW + zr->v4l_memgrab_active = 0; + zr->v4l_grab_frame = NO_GRAB_ACTIVE; + /* reenable grabbing to screen if it was running */ if (zr->v4l_overlay_active) { zr36057_overlay(zr, 1); diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 17118a490f81..72a037b75d63 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -99,88 +99,103 @@ #include <asm/byteorder.h> -const struct zoran_format zoran_formats[] = { - { - .name = "15-bit RGB", - .palette = VIDEO_PALETTE_RGB555, -#ifdef CONFIG_VIDEO_V4L2 -#ifdef __LITTLE_ENDIAN - .fourcc = V4L2_PIX_FMT_RGB555, +#if defined(CONFIG_VIDEO_V4L2) && defined(CONFIG_VIDEO_V4L1_COMPAT) +#define ZFMT(pal, fcc, cs) \ + .palette = (pal), .fourcc = (fcc), .colorspace = (cs) +#elif defined(CONFIG_VIDEO_V4L2) +#define ZFMT(pal, fcc, cs) \ + .fourcc = (fcc), .colorspace = (cs) #else - .fourcc = V4L2_PIX_FMT_RGB555X, -#endif - .colorspace = V4L2_COLORSPACE_SRGB, +#define ZFMT(pal, fcc, cs) \ + .palette = (pal) #endif + +const struct zoran_format zoran_formats[] = { + { + .name = "15-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB555, + V4L2_PIX_FMT_RGB555, V4L2_COLORSPACE_SRGB), .depth = 15, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, }, { - .name = "16-bit RGB", - .palette = VIDEO_PALETTE_RGB565, -#ifdef CONFIG_VIDEO_V4L2 -#ifdef __LITTLE_ENDIAN - .fourcc = V4L2_PIX_FMT_RGB565, -#else - .fourcc = V4L2_PIX_FMT_RGB565X, -#endif - .colorspace = V4L2_COLORSPACE_SRGB, -#endif + .name = "15-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB555X, V4L2_COLORSPACE_SRGB), + .depth = 15, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB555|ZR36057_VFESPFR_ErrDif, + }, { + .name = "16-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB565, + V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB), .depth = 16, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif| + ZR36057_VFESPFR_LittleEndian, + }, { + .name = "16-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB565|ZR36057_VFESPFR_ErrDif, }, { .name = "24-bit RGB", - .palette = VIDEO_PALETTE_RGB24, -#ifdef CONFIG_VIDEO_V4L2 -#ifdef __LITTLE_ENDIAN - .fourcc = V4L2_PIX_FMT_BGR24, -#else - .fourcc = V4L2_PIX_FMT_RGB24, -#endif - .colorspace = V4L2_COLORSPACE_SRGB, -#endif + ZFMT(VIDEO_PALETTE_RGB24, + V4L2_PIX_FMT_BGR24, V4L2_COLORSPACE_SRGB), .depth = 24, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_Pack24, }, { - .name = "32-bit RGB", - .palette = VIDEO_PALETTE_RGB32, -#ifdef CONFIG_VIDEO_V4L2 -#ifdef __LITTLE_ENDIAN - .fourcc = V4L2_PIX_FMT_BGR32, -#else - .fourcc = V4L2_PIX_FMT_RGB32, -#endif - .colorspace = V4L2_COLORSPACE_SRGB, -#endif + .name = "32-bit RGB LE", + ZFMT(VIDEO_PALETTE_RGB32, + V4L2_PIX_FMT_BGR32, V4L2_COLORSPACE_SRGB), + .depth = 32, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888|ZR36057_VFESPFR_LittleEndian, + }, { + .name = "32-bit RGB BE", + ZFMT(-1, + V4L2_PIX_FMT_RGB32, V4L2_COLORSPACE_SRGB), .depth = 32, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_RGB888, }, { .name = "4:2:2, packed, YUYV", - .palette = VIDEO_PALETTE_YUV422, -#ifdef CONFIG_VIDEO_V4L2 - .fourcc = V4L2_PIX_FMT_YUYV, - .colorspace = V4L2_COLORSPACE_SMPTE170M, -#endif + ZFMT(VIDEO_PALETTE_YUV422, + V4L2_PIX_FMT_YUYV, V4L2_COLORSPACE_SMPTE170M), + .depth = 16, + .flags = ZORAN_FORMAT_CAPTURE | + ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422, + }, { + .name = "4:2:2, packed, UYVY", + ZFMT(VIDEO_PALETTE_UYVY, + V4L2_PIX_FMT_UYVY, V4L2_COLORSPACE_SMPTE170M), .depth = 16, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, + .vfespfr = ZR36057_VFESPFR_YUV422|ZR36057_VFESPFR_LittleEndian, }, { .name = "Hardware-encoded Motion-JPEG", - .palette = -1, -#ifdef CONFIG_VIDEO_V4L2 - .fourcc = V4L2_PIX_FMT_MJPEG, - .colorspace = V4L2_COLORSPACE_SMPTE170M, -#endif + ZFMT(-1, + V4L2_PIX_FMT_MJPEG, V4L2_COLORSPACE_SMPTE170M), .depth = 0, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_PLAYBACK | ZORAN_FORMAT_COMPRESSED, } }; -static const int zoran_num_formats = - (sizeof(zoran_formats) / sizeof(struct zoran_format)); +#define NUM_FORMATS ARRAY_SIZE(zoran_formats) // RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined @@ -768,13 +783,13 @@ v4l_grab (struct file *file, struct zoran *zr = fh->zr; int res = 0, i; - for (i = 0; i < zoran_num_formats; i++) { + for (i = 0; i < NUM_FORMATS; i++) { if (zoran_formats[i].palette == mp->format && zoran_formats[i].flags & ZORAN_FORMAT_CAPTURE && !(zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)) break; } - if (i == zoran_num_formats || zoran_formats[i].depth == 0) { + if (i == NUM_FORMATS || zoran_formats[i].depth == 0) { dprintk(1, KERN_ERR "%s: v4l_grab() - wrong bytes-per-pixel format\n", @@ -1173,10 +1188,14 @@ zoran_close_end_session (struct file *file) /* v4l capture */ if (fh->v4l_buffers.active != ZORAN_FREE) { + long flags; + + spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); zr->v4l_buffers.allocated = 0; zr->v4l_buffers.active = fh->v4l_buffers.active = ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); } /* v4l buffers */ @@ -2107,7 +2126,7 @@ zoran_do_ioctl (struct inode *inode, vpict->colour, vpict->contrast, vpict->depth, vpict->palette); - for (i = 0; i < zoran_num_formats; i++) { + for (i = 0; i < NUM_FORMATS; i++) { const struct zoran_format *fmt = &zoran_formats[i]; if (fmt->palette != -1 && @@ -2116,7 +2135,7 @@ zoran_do_ioctl (struct inode *inode, fmt->depth == vpict->depth) break; } - if (i == zoran_num_formats) { + if (i == NUM_FORMATS) { dprintk(1, KERN_ERR "%s: VIDIOCSPICT - Invalid palette %d\n", @@ -2220,10 +2239,10 @@ zoran_do_ioctl (struct inode *inode, ZR_DEVNAME(zr), vbuf->base, vbuf->width, vbuf->height, vbuf->depth, vbuf->bytesperline); - for (i = 0; i < zoran_num_formats; i++) + for (i = 0; i < NUM_FORMATS; i++) if (zoran_formats[i].depth == vbuf->depth) break; - if (i == zoran_num_formats) { + if (i == NUM_FORMATS) { dprintk(1, KERN_ERR "%s: VIDIOCSFBUF - invalid fbuf depth %d\n", @@ -2672,14 +2691,14 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - for (i = 0; i < zoran_num_formats; i++) { + for (i = 0; i < NUM_FORMATS; i++) { if (zoran_formats[i].flags & flag) num++; if (num == fmt->index) break; } if (fmt->index < 0 /* late, but not too late */ || - i == zoran_num_formats) + i == NUM_FORMATS) return -EINVAL; memset(fmt, 0, sizeof(*fmt)); @@ -2737,7 +2756,8 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.height = fh->v4l_settings.height; fmt->fmt.pix.sizeimage = - fh->v4l_buffers.buffer_size; + fh->v4l_settings.bytesperline * + fh->v4l_settings.height; fmt->fmt.pix.pixelformat = fh->v4l_settings.format->fourcc; fmt->fmt.pix.colorspace = @@ -2941,11 +2961,11 @@ zoran_do_ioctl (struct inode *inode, sfmtjpg_unlock_and_return: mutex_unlock(&zr->resource_lock); } else { - for (i = 0; i < zoran_num_formats; i++) + for (i = 0; i < NUM_FORMATS; i++) if (fmt->fmt.pix.pixelformat == zoran_formats[i].fourcc) break; - if (i == zoran_num_formats) { + if (i == NUM_FORMATS) { dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - unknown/unsupported format 0x%x (%4.4s)\n", @@ -2984,8 +3004,9 @@ zoran_do_ioctl (struct inode *inode, /* tell the user the * results/missing stuff */ - fmt->fmt.pix.sizeimage = fh->v4l_buffers.buffer_size /*zr->gbpl * zr->gheight */ - ; + fmt->fmt.pix.sizeimage = + fh->v4l_settings.height * + fh->v4l_settings.bytesperline; if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) fmt->fmt.pix.field = @@ -3053,10 +3074,10 @@ zoran_do_ioctl (struct inode *inode, fb->fmt.bytesperline, fb->fmt.pixelformat, (char *) &printformat); - for (i = 0; i < zoran_num_formats; i++) + for (i = 0; i < NUM_FORMATS; i++) if (zoran_formats[i].fourcc == fb->fmt.pixelformat) break; - if (i == zoran_num_formats) { + if (i == NUM_FORMATS) { dprintk(1, KERN_ERR "%s: VIDIOC_S_FBUF - format=0x%x (%4.4s) not allowed\n", @@ -3439,8 +3460,13 @@ zoran_do_ioctl (struct inode *inode, goto strmoff_unlock_and_return; /* unload capture */ - if (zr->v4l_memgrab_active) + if (zr->v4l_memgrab_active) { + long flags; + + spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); + spin_unlock_irqrestore(&zr->spinlock, flags); + } for (i = 0; i < fh->v4l_buffers.num_buffers; i++) zr->v4l_buffers.buffer[i].state = @@ -3704,11 +3730,11 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_S_STD - norm=0x%llx\n", ZR_DEVNAME(zr), (unsigned long long)*std); - if (*std == V4L2_STD_PAL) + if ((*std & V4L2_STD_PAL) && !(*std & ~V4L2_STD_PAL)) norm = VIDEO_MODE_PAL; - else if (*std == V4L2_STD_NTSC) + else if ((*std & V4L2_STD_NTSC) && !(*std & ~V4L2_STD_NTSC)) norm = VIDEO_MODE_NTSC; - else if (*std == V4L2_STD_SECAM) + else if ((*std & V4L2_STD_SECAM) && !(*std & ~V4L2_STD_SECAM)) norm = VIDEO_MODE_SECAM; else if (*std == V4L2_STD_ALL) norm = VIDEO_MODE_AUTO; @@ -4149,11 +4175,11 @@ zoran_do_ioctl (struct inode *inode, V4L2_BUF_TYPE_VIDEO_CAPTURE) { int i; - for (i = 0; i < zoran_num_formats; i++) + for (i = 0; i < NUM_FORMATS; i++) if (zoran_formats[i].fourcc == fmt->fmt.pix.pixelformat) break; - if (i == zoran_num_formats) { + if (i == NUM_FORMATS) { res = -EINVAL; goto tryfmt_unlock_and_return; } @@ -4213,8 +4239,8 @@ zoran_poll (struct file *file, { struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; - wait_queue_head_t *queue = NULL; int res = 0, frame; + unsigned long flags; /* we should check whether buffers are ready to be synced on * (w/o waits - O_NONBLOCK) here @@ -4228,51 +4254,58 @@ zoran_poll (struct file *file, switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: - if (fh->v4l_buffers.active == ZORAN_FREE || - zr->v4l_pend_head == zr->v4l_pend_tail) { - dprintk(1, - "%s: zoran_poll() - no buffers queued\n", - ZR_DEVNAME(zr)); - res = POLLNVAL; - goto poll_unlock_and_return; - } - queue = &zr->v4l_capq; - frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME]; - poll_wait(file, queue, wait); - if (fh->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE) + poll_wait(file, &zr->v4l_capq, wait); + frame = zr->v4l_pend[zr->v4l_sync_tail & V4L_MASK_FRAME]; + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() raw - active=%c, sync_tail=%lu/%c, pend_tail=%lu, pend_head=%lu\n", + ZR_DEVNAME(zr), __FUNCTION__, + "FAL"[fh->v4l_buffers.active], zr->v4l_sync_tail, + "UPMD"[zr->v4l_buffers.buffer[frame].state], + zr->v4l_pend_tail, zr->v4l_pend_head); + /* Process is the one capturing? */ + if (fh->v4l_buffers.active != ZORAN_FREE && + /* Buffer ready to DQBUF? */ + zr->v4l_buffers.buffer[frame].state == BUZ_STATE_DONE) res = POLLIN | POLLRDNORM; + spin_unlock_irqrestore(&zr->spinlock, flags); + break; case ZORAN_MAP_MODE_JPG_REC: case ZORAN_MAP_MODE_JPG_PLAY: - if (fh->jpg_buffers.active == ZORAN_FREE || - zr->jpg_que_head == zr->jpg_que_tail) { - dprintk(1, - "%s: zoran_poll() - no buffers queued\n", - ZR_DEVNAME(zr)); - res = POLLNVAL; - goto poll_unlock_and_return; - } - queue = &zr->jpg_capq; + poll_wait(file, &zr->jpg_capq, wait); frame = zr->jpg_pend[zr->jpg_que_tail & BUZ_MASK_FRAME]; - poll_wait(file, queue, wait); - if (fh->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) { + + spin_lock_irqsave(&zr->spinlock, flags); + dprintk(3, + KERN_DEBUG + "%s: %s() jpg - active=%c, que_tail=%lu/%c, que_head=%lu, dma=%lu/%lu\n", + ZR_DEVNAME(zr), __FUNCTION__, + "FAL"[fh->jpg_buffers.active], zr->jpg_que_tail, + "UPMD"[zr->jpg_buffers.buffer[frame].state], + zr->jpg_que_head, zr->jpg_dma_tail, zr->jpg_dma_head); + if (fh->jpg_buffers.active != ZORAN_FREE && + zr->jpg_buffers.buffer[frame].state == BUZ_STATE_DONE) { if (fh->map_mode == ZORAN_MAP_MODE_JPG_REC) res = POLLIN | POLLRDNORM; else res = POLLOUT | POLLWRNORM; } + spin_unlock_irqrestore(&zr->spinlock, flags); + break; default: dprintk(1, + KERN_ERR "%s: zoran_poll() - internal error, unknown map_mode=%d\n", ZR_DEVNAME(zr), fh->map_mode); res = POLLNVAL; - goto poll_unlock_and_return; } -poll_unlock_and_return: mutex_unlock(&zr->resource_lock); return res; @@ -4368,11 +4401,15 @@ zoran_vm_close (struct vm_area_struct *vma) mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { + long flags; + + spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); zr->v4l_buffers.allocated = 0; zr->v4l_buffers.active = fh->v4l_buffers.active = ZORAN_FREE; + spin_unlock_irqrestore(&zr->spinlock, flags); } //v4l_fbuffer_free(file); fh->v4l_buffers.allocated = 0; diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index befff5f9d58c..ac49b15fa768 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_USB_SISUSBVGA) += misc/ obj-$(CONFIG_USB_TEST) += misc/ obj-$(CONFIG_USB_TRANCEVIBRATOR)+= misc/ obj-$(CONFIG_USB_USS720) += misc/ +obj-$(CONFIG_USB_IOWARRIOR) += misc/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 25f63f1096b4..b6bd05e3d439 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -18,9 +18,17 @@ #include "hcd.h" /* for usbcore internals */ #include "usb.h" +struct api_context { + struct completion done; + int status; +}; + static void usb_api_blocking_completion(struct urb *urb) { - complete((struct completion *)urb->context); + struct api_context *ctx = urb->context; + + ctx->status = urb->status; + complete(&ctx->done); } @@ -32,20 +40,21 @@ static void usb_api_blocking_completion(struct urb *urb) */ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) { - struct completion done; + struct api_context ctx; unsigned long expire; int retval; - int status = urb->status; - init_completion(&done); - urb->context = &done; + init_completion(&ctx.done); + urb->context = &ctx; urb->actual_length = 0; retval = usb_submit_urb(urb, GFP_NOIO); if (unlikely(retval)) goto out; expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; - if (!wait_for_completion_timeout(&done, expire)) { + if (!wait_for_completion_timeout(&ctx.done, expire)) { + usb_kill_urb(urb); + retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status); dev_dbg(&urb->dev->dev, "%s timed out on ep%d%s len=%d/%d\n", @@ -54,11 +63,8 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) usb_pipein(urb->pipe) ? "in" : "out", urb->actual_length, urb->transfer_buffer_length); - - usb_kill_urb(urb); - retval = status == -ENOENT ? -ETIMEDOUT : status; } else - retval = status; + retval = ctx.status; out: if (actual_length) *actual_length = urb->actual_length; @@ -411,15 +417,22 @@ int usb_sg_init ( * Some systems need to revert to PIO when DMA is temporarily * unavailable. For their sakes, both transfer_buffer and * transfer_dma are set when possible. However this can only - * work on systems without HIGHMEM, since DMA buffers located - * in high memory are not directly addressable by the CPU for - * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL + * work on systems without: + * + * - HIGHMEM, since DMA buffers located in high memory are + * not directly addressable by the CPU for PIO; + * + * - IOMMU, since dma_map_sg() is allowed to use an IOMMU to + * make virtually discontiguous buffers be "dma-contiguous" + * so that PIO and DMA need diferent numbers of URBs. + * + * So when HIGHMEM or IOMMU are in use, transfer_buffer is NULL * to prevent stale pointers and to help spot bugs. */ if (dma) { io->urbs [i]->transfer_dma = sg_dma_address (sg + i); len = sg_dma_len (sg + i); -#ifdef CONFIG_HIGHMEM +#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU) io->urbs[i]->transfer_buffer = NULL; #else io->urbs[i]->transfer_buffer = diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index aa21b38a31ce..b7917c5a3c6f 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -30,18 +30,40 @@ static const struct usb_device_id usb_quirk_list[] = { /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */ + { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Benq S2W 3300U */ { USB_DEVICE(0x04a5, 0x20b0), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Canon, Inc. CanoScan N1240U/LiDE30 */ + { USB_DEVICE(0x04a9, 0x220e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Canon, Inc. CanoScan N650U/N656U */ + { USB_DEVICE(0x04a9, 0x2206), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Canon, Inc. CanoScan 1220U */ + { USB_DEVICE(0x04a9, 0x2207), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Canon, Inc. CanoScan N670U/N676U/LiDE 20 */ + { USB_DEVICE(0x04a9, 0x220d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* old Cannon scanner */ + { USB_DEVICE(0x04a9, 0x2220), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Seiko Epson Corp. Perfection 1200 */ { USB_DEVICE(0x04b8, 0x0104), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Seiko Epson Corp. Perfection 660 */ + { USB_DEVICE(0x04b8, 0x0114), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Epson Perfection 1260 Photo */ + { USB_DEVICE(0x04b8, 0x011d), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Seiko Epson Corp - Perfection 1670 */ { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* EPSON Perfection 2480 */ + { USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Seiko Epson Corp.*/ + { USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Samsung ML-2510 Series printer */ { USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Elsa MicroLink 56k (V.250) */ { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Ultima Electronics Corp.*/ { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Agfa Snapscan1212u */ + { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Umax [hex] Astra 3400U */ { USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index d18901b92cda..c6760aee1e5c 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -50,7 +50,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen, return -EINVAL; /* fill buffer from src[] until null descriptor ptr */ - for (; 0 != *src; src++) { + for (; NULL != *src; src++) { unsigned len = (*src)->bLength; if (len > buflen) diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 6042364402b8..3aa46cfa66ba 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -71,7 +71,7 @@ ep_matches ( u16 max; /* endpoint already claimed? */ - if (0 != ep->driver_data) + if (NULL != ep->driver_data) return 0; /* only support ep0 for portable CONTROL traffic */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index a3376739a81b..593e23507b1a 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1723,7 +1723,8 @@ rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) size += sizeof (struct rndis_packet_msg_type); size -= size % dev->out_ep->maxpacket; - if ((skb = alloc_skb (size + NET_IP_ALIGN, gfp_flags)) == 0) { + skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags); + if (skb == NULL) { DEBUG (dev, "no rx skb\n"); goto enomem; } diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index e60745ffaf8e..173004f60fea 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -964,7 +964,7 @@ static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len) } if (len > sizeof (dev->rbuf)) req->buf = kmalloc(len, GFP_ATOMIC); - if (req->buf == 0) { + if (req->buf == NULL) { req->buf = dev->rbuf; return -ENOMEM; } @@ -1394,7 +1394,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) dev->setup_abort = 0; if (dev->state == STATE_DEV_UNCONNECTED) { #ifdef CONFIG_USB_GADGET_DUALSPEED - if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) { + if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == NULL) { spin_unlock(&dev->lock); ERROR (dev, "no high speed config??\n"); return -EINVAL; diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 700dda8a9157..4b27d12f049d 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1299,7 +1299,7 @@ static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req, req->req.actual = 0; req->req.status = -EINPROGRESS; - if (ep->desc == 0) /* control */ + if (ep->desc == NULL) /* control */ start_ep0(ep, req); else { if (request && !ep->busy) diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 63b9521c1322..72b4ebbf132d 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -93,8 +93,6 @@ static const char driver_name [] = "pxa2xx_udc"; static const char ep0name [] = "ep0"; -// #define DISABLE_TEST_MODE - #ifdef CONFIG_ARCH_IXP4XX /* cpu-specific register addresses are compiled in to this code */ @@ -113,17 +111,6 @@ static const char ep0name [] = "ep0"; #define SIZE_STR "" #endif -#ifdef DISABLE_TEST_MODE -/* (mode == 0) == no undocumented chip tweaks - * (mode & 1) == double buffer bulk IN - * (mode & 2) == double buffer bulk OUT - * ... so mode = 3 (or 7, 15, etc) does it for both - */ -static ushort fifo_mode = 0; -module_param(fifo_mode, ushort, 0); -MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); -#endif - /* --------------------------------------------------------------------------- * endpoint related parts of the api to the usb controller hardware, * used by gadget driver; and the inner talker-to-hardware core. @@ -1252,23 +1239,6 @@ static void udc_enable (struct pxa2xx_udc *dev) UDC_RES2 = 0x00; } -#ifdef DISABLE_TEST_MODE - /* "test mode" seems to have become the default in later chip - * revs, preventing double buffering (and invalidating docs). - * this EXPERIMENT enables it for bulk endpoints by tweaking - * undefined/reserved register bits (that other drivers clear). - * Belcarra code comments noted this usage. - */ - if (fifo_mode & 1) { /* IN endpoints */ - UDC_RES1 |= USIR0_IR1|USIR0_IR6; - UDC_RES2 |= USIR1_IR11; - } - if (fifo_mode & 2) { /* OUT endpoints */ - UDC_RES1 |= USIR0_IR2|USIR0_IR7; - UDC_RES2 |= USIR1_IR12; - } -#endif - /* enable suspend/resume and reset irqs */ udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index a2e6e3fc8c8d..fcfe869acb94 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -653,7 +653,8 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep (ep, gfp_flags) != 0) { + if (source_sink_start_ep(ep, gfp_flags) + != NULL) { dev->in_ep = ep; continue; } @@ -667,7 +668,8 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep (ep, gfp_flags) != 0) { + if (source_sink_start_ep(ep, gfp_flags) + != NULL) { dev->out_ep = ep; continue; } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index e831cb7f64fd..33f6ee50b8d3 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -356,7 +356,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - port %d", __FUNCTION__, port->number); - if ((!port->tty) || (!port->tty->termios)) { + if (!port->tty || !port->tty->termios) { dbg("%s - no tty structures", __FUNCTION__); return; } @@ -526,50 +526,35 @@ static void cp2101_set_termios (struct usb_serial_port *port, return; } cflag = port->tty->termios->c_cflag; - - /* Check that they really want us to change something */ - if (old_termios) { - if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(port->tty->termios->c_iflag) - == RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s - nothing to change...", __FUNCTION__); - return; - } - - old_cflag = old_termios->c_cflag; - } + old_cflag = old_termios->c_cflag; + baud = tty_get_baud_rate(port->tty); /* If the baud rate is to be updated*/ - if ((cflag & CBAUD) != (old_cflag & CBAUD)) { - switch (cflag & CBAUD) { - /* - * The baud rates which are commented out below - * appear to be supported by the device - * but are non-standard - */ - case B0: baud = 0; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B1800: baud = 1800; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - /*case B7200: baud = 7200; break;*/ - case B9600: baud = 9600; break; - /*ase B14400: baud = 14400; break;*/ - case B19200: baud = 19200; break; - /*case B28800: baud = 28800; break;*/ - case B38400: baud = 38400; break; - /*case B55854: baud = 55054; break;*/ - case B57600: baud = 57600; break; - case B115200: baud = 115200; break; - /*case B127117: baud = 127117; break;*/ - case B230400: baud = 230400; break; - case B460800: baud = 460800; break; - case B921600: baud = 921600; break; - /*case B3686400: baud = 3686400; break;*/ + if (baud != tty_termios_baud_rate(old_termios)) { + switch (baud) { + case 0: + case 600: + case 1200: + case 1800: + case 2400: + case 4800: + case 7200: + case 9600: + case 14400: + case 19200: + case 28800: + case 38400: + case 55854: + case 57600: + case 115200: + case 127117: + case 230400: + case 460800: + case 921600: + case 3686400: + break; default: - dev_err(&port->dev, "cp2101 driver does not " - "support the baudrate requested\n"); + baud = 9600; break; } diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 976f54ec26e6..dab2e66d111d 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -433,38 +433,38 @@ struct digi_port { /* Local Function Declarations */ -static void digi_wakeup_write( struct usb_serial_port *port ); +static void digi_wakeup_write(struct usb_serial_port *port); static void digi_wakeup_write_lock(struct work_struct *work); -static int digi_write_oob_command( struct usb_serial_port *port, - unsigned char *buf, int count, int interruptible ); -static int digi_write_inb_command( struct usb_serial_port *port, - unsigned char *buf, int count, unsigned long timeout ); -static int digi_set_modem_signals( struct usb_serial_port *port, - unsigned int modem_signals, int interruptible ); -static int digi_transmit_idle( struct usb_serial_port *port, - unsigned long timeout ); +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible); +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout); +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible); +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout); static void digi_rx_throttle (struct usb_serial_port *port); static void digi_rx_unthrottle (struct usb_serial_port *port); -static void digi_set_termios( struct usb_serial_port *port, - struct ktermios *old_termios ); -static void digi_break_ctl( struct usb_serial_port *port, int break_state ); -static int digi_ioctl( struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg ); -static int digi_tiocmget( struct usb_serial_port *port, struct file *file ); -static int digi_tiocmset( struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear ); -static int digi_write( struct usb_serial_port *port, const unsigned char *buf, int count ); -static void digi_write_bulk_callback( struct urb *urb ); -static int digi_write_room( struct usb_serial_port *port ); -static int digi_chars_in_buffer( struct usb_serial_port *port ); -static int digi_open( struct usb_serial_port *port, struct file *filp ); -static void digi_close( struct usb_serial_port *port, struct file *filp ); -static int digi_startup_device( struct usb_serial *serial ); -static int digi_startup( struct usb_serial *serial ); -static void digi_shutdown( struct usb_serial *serial ); -static void digi_read_bulk_callback( struct urb *urb ); -static int digi_read_inb_callback( struct urb *urb ); -static int digi_read_oob_callback( struct urb *urb ); +static void digi_set_termios(struct usb_serial_port *port, + struct ktermios *old_termios); +static void digi_break_ctl(struct usb_serial_port *port, int break_state); +static int digi_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg); +static int digi_tiocmget(struct usb_serial_port *port, struct file *file); +static int digi_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear); +static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count); +static void digi_write_bulk_callback(struct urb *urb); +static int digi_write_room(struct usb_serial_port *port); +static int digi_chars_in_buffer(struct usb_serial_port *port); +static int digi_open(struct usb_serial_port *port, struct file *filp); +static void digi_close(struct usb_serial_port *port, struct file *filp); +static int digi_startup_device(struct usb_serial *serial); +static int digi_startup(struct usb_serial *serial); +static void digi_shutdown(struct usb_serial *serial); +static void digi_read_bulk_callback(struct urb *urb); +static int digi_read_inb_callback(struct urb *urb); +static int digi_read_oob_callback(struct urb *urb); /* Statics */ @@ -576,9 +576,9 @@ static struct usb_serial_driver digi_acceleport_4_device = { * with the equivalent code. */ -static inline long cond_wait_interruptible_timeout_irqrestore( +static long cond_wait_interruptible_timeout_irqrestore( wait_queue_head_t *q, long timeout, - spinlock_t *lock, unsigned long flags ) + spinlock_t *lock, unsigned long flags) { DEFINE_WAIT(wait); @@ -600,18 +600,16 @@ static inline long cond_wait_interruptible_timeout_irqrestore( static void digi_wakeup_write_lock(struct work_struct *work) { - struct digi_port *priv = - container_of(work, struct digi_port, dp_wakeup_work); + struct digi_port *priv = container_of(work, struct digi_port, dp_wakeup_work); struct usb_serial_port *port = priv->dp_port; unsigned long flags; - - spin_lock_irqsave( &priv->dp_port_lock, flags ); - digi_wakeup_write( port ); - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); + digi_wakeup_write(port); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); } -static void digi_wakeup_write( struct usb_serial_port *port ) +static void digi_wakeup_write(struct usb_serial_port *port) { tty_wakeup(port->tty); } @@ -628,8 +626,8 @@ static void digi_wakeup_write( struct usb_serial_port *port ) * returned by usb_submit_urb. */ -static int digi_write_oob_command( struct usb_serial_port *port, - unsigned char *buf, int count, int interruptible ) +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible) { int ret = 0; @@ -638,49 +636,37 @@ static int digi_write_oob_command( struct usb_serial_port *port, struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); unsigned long flags = 0; + dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count); -dbg( "digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count ); - - spin_lock_irqsave( &oob_priv->dp_port_lock, flags ); - - while( count > 0 ) { - - while( oob_port->write_urb->status == -EINPROGRESS - || oob_priv->dp_write_urb_in_use ) { + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + while(count > 0) { + while(oob_port->write_urb->status == -EINPROGRESS + || oob_priv->dp_write_urb_in_use) { cond_wait_interruptible_timeout_irqrestore( &oob_port->write_wait, DIGI_RETRY_TIMEOUT, - &oob_priv->dp_port_lock, flags ); - if( interruptible && signal_pending(current) ) { - return( -EINTR ); - } - spin_lock_irqsave( &oob_priv->dp_port_lock, flags ); + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); } /* len must be a multiple of 4, so commands are not split */ - len = min(count, oob_port->bulk_out_size ); - if( len > 4 ) + len = min(count, oob_port->bulk_out_size); + if (len > 4) len &= ~3; - - memcpy( oob_port->write_urb->transfer_buffer, buf, len ); + memcpy(oob_port->write_urb->transfer_buffer, buf, len); oob_port->write_urb->transfer_buffer_length = len; oob_port->write_urb->dev = port->serial->dev; - - if( (ret=usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0 ) { + if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) { oob_priv->dp_write_urb_in_use = 1; count -= len; buf += len; } - - } - - spin_unlock_irqrestore( &oob_priv->dp_port_lock, flags ); - - if( ret ) { - err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, - ret ); } - - return( ret ); + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret); + return ret; } @@ -697,63 +683,58 @@ dbg( "digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, co * error returned by digi_write. */ -static int digi_write_inb_command( struct usb_serial_port *port, - unsigned char *buf, int count, unsigned long timeout ) +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout) { - int ret = 0; int len; struct digi_port *priv = usb_get_serial_port_data(port); unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; + dbg("digi_write_inb_command: TOP: port=%d, count=%d", + priv->dp_port_num, count); -dbg( "digi_write_inb_command: TOP: port=%d, count=%d", priv->dp_port_num, -count ); - - if( timeout ) + if (timeout) timeout += jiffies; else timeout = ULONG_MAX; - spin_lock_irqsave( &priv->dp_port_lock, flags ); - - while( count > 0 && ret == 0 ) { - - while( (port->write_urb->status == -EINPROGRESS - || priv->dp_write_urb_in_use) && time_before(jiffies, timeout)) { + spin_lock_irqsave(&priv->dp_port_lock, flags); + while(count > 0 && ret == 0) { + while((port->write_urb->status == -EINPROGRESS + || priv->dp_write_urb_in_use) && time_before(jiffies, timeout)) { cond_wait_interruptible_timeout_irqrestore( &port->write_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags ); - if( signal_pending(current) ) { - return( -EINTR ); - } - spin_lock_irqsave( &priv->dp_port_lock, flags ); + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); } /* len must be a multiple of 4 and small enough to */ /* guarantee the write will send buffered data first, */ /* so commands are in order with data and not split */ - len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len ); - if( len > 4 ) + len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); + if (len > 4) len &= ~3; /* write any buffered data first */ - if( priv->dp_out_buf_len > 0 ) { + if (priv->dp_out_buf_len > 0) { data[0] = DIGI_CMD_SEND_DATA; data[1] = priv->dp_out_buf_len; - memcpy( data+2, priv->dp_out_buf, - priv->dp_out_buf_len ); - memcpy( data+2+priv->dp_out_buf_len, buf, len ); + memcpy(data + 2, priv->dp_out_buf, + priv->dp_out_buf_len); + memcpy(data + 2 + priv->dp_out_buf_len, buf, len); port->write_urb->transfer_buffer_length - = priv->dp_out_buf_len+2+len; + = priv->dp_out_buf_len + 2 + len; } else { - memcpy( data, buf, len ); + memcpy(data, buf, len); port->write_urb->transfer_buffer_length = len; } port->write_urb->dev = port->serial->dev; - if( (ret=usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0 ) { + if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { priv->dp_write_urb_in_use = 1; priv->dp_out_buf_len = 0; count -= len; @@ -761,16 +742,12 @@ count ); } } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - - if( ret ) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", __FUNCTION__, - ret, priv->dp_port_num ); - } - - return( ret ); - + if (ret) + err("%s: usb_submit_urb failed, ret=%d, port=%d", + __FUNCTION__, ret, priv->dp_port_num); + return ret; } @@ -784,8 +761,8 @@ count ); * returned by usb_submit_urb. */ -static int digi_set_modem_signals( struct usb_serial_port *port, - unsigned int modem_signals, int interruptible ) +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible) { int ret; @@ -796,60 +773,47 @@ static int digi_set_modem_signals( struct usb_serial_port *port, unsigned long flags = 0; -dbg( "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x", -port_priv->dp_port_num, modem_signals ); + dbg("digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x", + port_priv->dp_port_num, modem_signals); - spin_lock_irqsave( &oob_priv->dp_port_lock, flags ); - spin_lock( &port_priv->dp_port_lock ); + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); - while( oob_port->write_urb->status == -EINPROGRESS - || oob_priv->dp_write_urb_in_use ) { - spin_unlock( &port_priv->dp_port_lock ); + while(oob_port->write_urb->status == -EINPROGRESS || oob_priv->dp_write_urb_in_use) { + spin_unlock(&port_priv->dp_port_lock); cond_wait_interruptible_timeout_irqrestore( &oob_port->write_wait, DIGI_RETRY_TIMEOUT, - &oob_priv->dp_port_lock, flags ); - if( interruptible && signal_pending(current) ) { - return( -EINTR ); - } - spin_lock_irqsave( &oob_priv->dp_port_lock, flags ); - spin_lock( &port_priv->dp_port_lock ); + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); } - data[0] = DIGI_CMD_SET_DTR_SIGNAL; data[1] = port_priv->dp_port_num; - data[2] = (modem_signals&TIOCM_DTR) ? - DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; + data[2] = (modem_signals&TIOCM_DTR) ? DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; data[3] = 0; - data[4] = DIGI_CMD_SET_RTS_SIGNAL; data[5] = port_priv->dp_port_num; - data[6] = (modem_signals&TIOCM_RTS) ? - DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; + data[6] = (modem_signals&TIOCM_RTS) ? DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; data[7] = 0; oob_port->write_urb->transfer_buffer_length = 8; oob_port->write_urb->dev = port->serial->dev; - if( (ret=usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0 ) { + if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) { oob_priv->dp_write_urb_in_use = 1; port_priv->dp_modem_signals = (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS)) | (modem_signals&(TIOCM_DTR|TIOCM_RTS)); } - - spin_unlock( &port_priv->dp_port_lock ); - spin_unlock_irqrestore( &oob_priv->dp_port_lock, flags ); - - if( ret ) { - err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, - ret ); - } - - return( ret ); - + spin_unlock(&port_priv->dp_port_lock); + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret); + return ret; } - /* * Digi Transmit Idle * @@ -862,203 +826,182 @@ port_priv->dp_port_num, modem_signals ); * port at a time, so its ok. */ -static int digi_transmit_idle( struct usb_serial_port *port, - unsigned long timeout ) +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout) { - int ret; unsigned char buf[2]; struct digi_port *priv = usb_get_serial_port_data(port); unsigned long flags = 0; - - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); priv->dp_transmit_idle = 0; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); buf[0] = DIGI_CMD_TRANSMIT_IDLE; buf[1] = 0; timeout += jiffies; - if( (ret=digi_write_inb_command( port, buf, 2, timeout-jiffies )) != 0 ) - return( ret ); + if ((ret = digi_write_inb_command(port, buf, 2, timeout - jiffies)) != 0) + return ret; - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); - while( time_before(jiffies, timeout) && !priv->dp_transmit_idle ) { + while(time_before(jiffies, timeout) && !priv->dp_transmit_idle) { cond_wait_interruptible_timeout_irqrestore( &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags ); - if( signal_pending(current) ) { - return( -EINTR ); - } - spin_lock_irqsave( &priv->dp_port_lock, flags ); + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); } - priv->dp_transmit_idle = 0; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - - return( 0 ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; } -static void digi_rx_throttle( struct usb_serial_port *port ) +static void digi_rx_throttle(struct usb_serial_port *port) { - unsigned long flags; struct digi_port *priv = usb_get_serial_port_data(port); -dbg( "digi_rx_throttle: TOP: port=%d", priv->dp_port_num ); + dbg("digi_rx_throttle: TOP: port=%d", priv->dp_port_num); /* stop receiving characters by not resubmitting the read urb */ - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); priv->dp_throttled = 1; priv->dp_throttle_restart = 0; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - + spin_unlock_irqrestore(&priv->dp_port_lock, flags); } -static void digi_rx_unthrottle( struct usb_serial_port *port ) +static void digi_rx_unthrottle(struct usb_serial_port *port) { - int ret = 0; unsigned long flags; struct digi_port *priv = usb_get_serial_port_data(port); -dbg( "digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num ); + dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num); - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); /* turn throttle off */ priv->dp_throttled = 0; priv->dp_throttle_restart = 0; /* restart read chain */ - if( priv->dp_throttle_restart ) { + if (priv->dp_throttle_restart) { port->read_urb->dev = port->serial->dev; - ret = usb_submit_urb( port->read_urb, GFP_ATOMIC ); + ret = usb_submit_urb(port->read_urb, GFP_ATOMIC); } - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - - if( ret ) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", __FUNCTION__, - ret, priv->dp_port_num ); - } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + if (ret) + err("%s: usb_submit_urb failed, ret=%d, port=%d", + __FUNCTION__, ret, priv->dp_port_num); } -static void digi_set_termios( struct usb_serial_port *port, - struct ktermios *old_termios ) +static void digi_set_termios(struct usb_serial_port *port, + struct ktermios *old_termios) { struct digi_port *priv = usb_get_serial_port_data(port); - unsigned int iflag = port->tty->termios->c_iflag; - unsigned int cflag = port->tty->termios->c_cflag; + struct tty_struct *tty = port->tty; + unsigned int iflag = tty->termios->c_iflag; + unsigned int cflag = tty->termios->c_cflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int old_cflag = old_termios->c_cflag; unsigned char buf[32]; unsigned int modem_signals; int arg,ret; int i = 0; + speed_t baud; - -dbg( "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag ); + dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); /* set baud rate */ - if( (cflag&CBAUD) != (old_cflag&CBAUD) ) { - + if ((baud = tty_get_baud_rate(tty)) != tty_termios_baud_rate(old_termios)) { arg = -1; /* reassert DTR and (maybe) RTS on transition from B0 */ - if( (old_cflag&CBAUD) == B0 ) { + if ((old_cflag&CBAUD) == B0) { /* don't set RTS if using hardware flow control */ /* and throttling input */ modem_signals = TIOCM_DTR; - if( !(port->tty->termios->c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &port->tty->flags) ) { + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) modem_signals |= TIOCM_RTS; - } - digi_set_modem_signals( port, modem_signals, 1 ); + digi_set_modem_signals(port, modem_signals, 1); } - - switch( (cflag&CBAUD) ) { + switch (baud) { /* drop DTR and RTS on transition to B0 */ - case B0: digi_set_modem_signals( port, 0, 1 ); break; - case B50: arg = DIGI_BAUD_50; break; - case B75: arg = DIGI_BAUD_75; break; - case B110: arg = DIGI_BAUD_110; break; - case B150: arg = DIGI_BAUD_150; break; - case B200: arg = DIGI_BAUD_200; break; - case B300: arg = DIGI_BAUD_300; break; - case B600: arg = DIGI_BAUD_600; break; - case B1200: arg = DIGI_BAUD_1200; break; - case B1800: arg = DIGI_BAUD_1800; break; - case B2400: arg = DIGI_BAUD_2400; break; - case B4800: arg = DIGI_BAUD_4800; break; - case B9600: arg = DIGI_BAUD_9600; break; - case B19200: arg = DIGI_BAUD_19200; break; - case B38400: arg = DIGI_BAUD_38400; break; - case B57600: arg = DIGI_BAUD_57600; break; - case B115200: arg = DIGI_BAUD_115200; break; - case B230400: arg = DIGI_BAUD_230400; break; - case B460800: arg = DIGI_BAUD_460800; break; - default: - dbg( "digi_set_termios: can't handle baud rate 0x%x", - (cflag&CBAUD) ); - break; + case 0: digi_set_modem_signals(port, 0, 1); break; + case 50: arg = DIGI_BAUD_50; break; + case 75: arg = DIGI_BAUD_75; break; + case 110: arg = DIGI_BAUD_110; break; + case 150: arg = DIGI_BAUD_150; break; + case 200: arg = DIGI_BAUD_200; break; + case 300: arg = DIGI_BAUD_300; break; + case 600: arg = DIGI_BAUD_600; break; + case 1200: arg = DIGI_BAUD_1200; break; + case 1800: arg = DIGI_BAUD_1800; break; + case 2400: arg = DIGI_BAUD_2400; break; + case 4800: arg = DIGI_BAUD_4800; break; + case 9600: arg = DIGI_BAUD_9600; break; + case 19200: arg = DIGI_BAUD_19200; break; + case 38400: arg = DIGI_BAUD_38400; break; + case 57600: arg = DIGI_BAUD_57600; break; + case 115200: arg = DIGI_BAUD_115200; break; + case 230400: arg = DIGI_BAUD_230400; break; + case 460800: arg = DIGI_BAUD_460800; break; + default: + arg = DIGI_BAUD_9600; + baud = 9600; + break; } - - if( arg != -1 ) { + if (arg != -1) { buf[i++] = DIGI_CMD_SET_BAUD_RATE; buf[i++] = priv->dp_port_num; buf[i++] = arg; buf[i++] = 0; } - } - /* set parity */ - if( (cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD)) ) { - - if( (cflag&PARENB) ) { - if( (cflag&PARODD) ) + if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) { + if (cflag&PARENB) { + if (cflag&PARODD) arg = DIGI_PARITY_ODD; else arg = DIGI_PARITY_EVEN; } else { arg = DIGI_PARITY_NONE; } - buf[i++] = DIGI_CMD_SET_PARITY; buf[i++] = priv->dp_port_num; buf[i++] = arg; buf[i++] = 0; - } - /* set word size */ - if( (cflag&CSIZE) != (old_cflag&CSIZE) ) { - + if ((cflag&CSIZE) != (old_cflag&CSIZE)) { arg = -1; - - switch( (cflag&CSIZE) ) { + switch (cflag&CSIZE) { case CS5: arg = DIGI_WORD_SIZE_5; break; case CS6: arg = DIGI_WORD_SIZE_6; break; case CS7: arg = DIGI_WORD_SIZE_7; break; case CS8: arg = DIGI_WORD_SIZE_8; break; default: - dbg( "digi_set_termios: can't handle word size %d", - (cflag&CSIZE) ); + dbg("digi_set_termios: can't handle word size %d", + (cflag&CSIZE)); break; } - if( arg != -1 ) { + if (arg != -1) { buf[i++] = DIGI_CMD_SET_WORD_SIZE; buf[i++] = priv->dp_port_num; buf[i++] = arg; @@ -1068,9 +1011,9 @@ dbg( "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, ol } /* set stop bits */ - if( (cflag&CSTOPB) != (old_cflag&CSTOPB) ) { + if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) { - if( (cflag&CSTOPB) ) + if ((cflag&CSTOPB)) arg = DIGI_STOP_BITS_2; else arg = DIGI_STOP_BITS_1; @@ -1083,18 +1026,15 @@ dbg( "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, ol } /* set input flow control */ - if( (iflag&IXOFF) != (old_iflag&IXOFF) - || (cflag&CRTSCTS) != (old_cflag&CRTSCTS) ) { - + if ((iflag&IXOFF) != (old_iflag&IXOFF) + || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) { arg = 0; - - if( (iflag&IXOFF) ) + if (iflag&IXOFF) arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF; else arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF; - if( (cflag&CRTSCTS) ) { - + if (cflag&CRTSCTS) { arg |= DIGI_INPUT_FLOW_CONTROL_RTS; /* On USB-4 it is necessary to assert RTS prior */ @@ -1107,43 +1047,37 @@ dbg( "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, ol } else { arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS; } - buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; buf[i++] = priv->dp_port_num; buf[i++] = arg; buf[i++] = 0; - } /* set output flow control */ - if( (iflag&IXON) != (old_iflag&IXON) - || (cflag&CRTSCTS) != (old_cflag&CRTSCTS) ) { - + if ((iflag&IXON) != (old_iflag&IXON) + || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) { arg = 0; - - if( (iflag&IXON) ) + if (iflag&IXON) arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; else arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; - if( (cflag&CRTSCTS) ) { + if (cflag&CRTSCTS) { arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS; } else { arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS; - port->tty->hw_stopped = 0; + tty->hw_stopped = 0; } buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; buf[i++] = priv->dp_port_num; buf[i++] = arg; buf[i++] = 0; - } /* set receive enable/disable */ - if( (cflag&CREAD) != (old_cflag&CREAD) ) { - - if( (cflag&CREAD) ) + if ((cflag&CREAD) != (old_cflag&CREAD)) { + if (cflag&CREAD) arg = DIGI_ENABLE; else arg = DIGI_DISABLE; @@ -1152,32 +1086,26 @@ dbg( "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, ol buf[i++] = priv->dp_port_num; buf[i++] = arg; buf[i++] = 0; - } - - if( (ret=digi_write_oob_command( port, buf, i, 1 )) != 0 ) - dbg( "digi_set_termios: write oob failed, ret=%d", ret ); + if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0) + dbg("digi_set_termios: write oob failed, ret=%d", ret); } -static void digi_break_ctl( struct usb_serial_port *port, int break_state ) +static void digi_break_ctl(struct usb_serial_port *port, int break_state) { - unsigned char buf[4]; - buf[0] = DIGI_CMD_BREAK_CONTROL; buf[1] = 2; /* length */ buf[2] = break_state ? 1 : 0; buf[3] = 0; /* pad */ - - digi_write_inb_command( port, buf, 4, 0 ); - + digi_write_inb_command(port, buf, 4, 0); } -static int digi_tiocmget( struct usb_serial_port *port, struct file *file ) +static int digi_tiocmget(struct usb_serial_port *port, struct file *file) { struct digi_port *priv = usb_get_serial_port_data(port); unsigned int val; @@ -1185,15 +1113,15 @@ static int digi_tiocmget( struct usb_serial_port *port, struct file *file ) dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num); - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); val = priv->dp_modem_signals; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); return val; } -static int digi_tiocmset( struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear ) +static int digi_tiocmset(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) { struct digi_port *priv = usb_get_serial_port_data(port); unsigned int val; @@ -1201,41 +1129,34 @@ static int digi_tiocmset( struct usb_serial_port *port, struct file *file, dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num); - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); val = (priv->dp_modem_signals & ~clear) | set; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - return digi_set_modem_signals( port, val, 1 ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return digi_set_modem_signals(port, val, 1); } -static int digi_ioctl( struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg ) +static int digi_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) { - struct digi_port *priv = usb_get_serial_port_data(port); - -dbg( "digi_ioctl: TOP: port=%d, cmd=0x%x", priv->dp_port_num, cmd ); + dbg("digi_ioctl: TOP: port=%d, cmd=0x%x", priv->dp_port_num, cmd); switch (cmd) { - case TIOCMIWAIT: /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ /* TODO */ - return( 0 ); - + return 0; case TIOCGICOUNT: /* return count of modemline transitions */ /* TODO */ return 0; - } - - return( -ENOIOCTLCMD ); + return -ENOIOCTLCMD; } - -static int digi_write( struct usb_serial_port *port, const unsigned char *buf, int count ) +static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count) { int ret,data_len,new_len; @@ -1243,35 +1164,29 @@ static int digi_write( struct usb_serial_port *port, const unsigned char *buf, i unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; - -dbg( "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld", -priv->dp_port_num, count, in_interrupt() ); + dbg("digi_write: TOP: port=%d, count=%d, in_interrupt=%ld", + priv->dp_port_num, count, in_interrupt()); /* copy user data (which can sleep) before getting spin lock */ - count = min( count, port->bulk_out_size-2 ); - count = min( 64, count); + count = min(count, port->bulk_out_size-2); + count = min(64, count); /* be sure only one write proceeds at a time */ /* there are races on the port private buffer */ /* and races to check write_urb->status */ - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); /* wait for urb status clear to submit another urb */ - if( port->write_urb->status == -EINPROGRESS - || priv->dp_write_urb_in_use ) { - + if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) { /* buffer data if count is 1 (probably put_char) if possible */ - if( count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE ) { + if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) { priv->dp_out_buf[priv->dp_out_buf_len++] = *buf; new_len = 1; } else { new_len = 0; } - - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - - return( new_len ); - + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return new_len; } /* allow space for any buffered data and for new data, up to */ @@ -1279,9 +1194,9 @@ priv->dp_port_num, count, in_interrupt() ); new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); data_len = new_len + priv->dp_out_buf_len; - if( data_len == 0 ) { - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - return( 0 ); + if (data_len == 0) { + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; } port->write_urb->transfer_buffer_length = data_len+2; @@ -1291,32 +1206,29 @@ priv->dp_port_num, count, in_interrupt() ); *data++ = data_len; /* copy in buffered data first */ - memcpy( data, priv->dp_out_buf, priv->dp_out_buf_len ); + memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len); data += priv->dp_out_buf_len; /* copy in new data */ - memcpy( data, buf, new_len ); + memcpy(data, buf, new_len); - if( (ret=usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0 ) { + if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { priv->dp_write_urb_in_use = 1; ret = new_len; priv->dp_out_buf_len = 0; } /* return length of new data written, or error */ - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - if( ret < 0 ) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", __FUNCTION__, - ret, priv->dp_port_num ); - } - -dbg( "digi_write: returning %d", ret ); - return( ret ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + if (ret < 0) + err("%s: usb_submit_urb failed, ret=%d, port=%d", + __FUNCTION__, ret, priv->dp_port_num); + dbg("digi_write: returning %d", ret); + return ret; } - -static void digi_write_bulk_callback( struct urb *urb ) +static void digi_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; @@ -1326,153 +1238,136 @@ static void digi_write_bulk_callback( struct urb *urb ) int ret = 0; int status = urb->status; - - dbg("digi_write_bulk_callback: TOP, urb status=%d", status); + dbg("digi_write_bulk_callback: TOP, urb->status=%d", status); /* port and serial sanity check */ - if( port == NULL || (priv=usb_get_serial_port_data(port)) == NULL ) { + if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) { err("%s: port or port->private is NULL, status=%d", __FUNCTION__, status); return; } serial = port->serial; - if( serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL ) { + if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) { err("%s: serial or serial->private is NULL, status=%d", __FUNCTION__, status); return; } /* handle oob callback */ - if( priv->dp_port_num == serial_priv->ds_oob_port_num ) { - dbg( "digi_write_bulk_callback: oob callback" ); - spin_lock( &priv->dp_port_lock ); + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + dbg("digi_write_bulk_callback: oob callback"); + spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - wake_up_interruptible( &port->write_wait ); - spin_unlock( &priv->dp_port_lock ); + wake_up_interruptible(&port->write_wait); + spin_unlock(&priv->dp_port_lock); return; } /* try to send any buffered data on this port, if it is open */ - spin_lock( &priv->dp_port_lock ); + spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - if( port->open_count && port->write_urb->status != -EINPROGRESS - && priv->dp_out_buf_len > 0 ) { - + if (port->open_count && port->write_urb->status != -EINPROGRESS + && priv->dp_out_buf_len > 0) { *((unsigned char *)(port->write_urb->transfer_buffer)) = (unsigned char)DIGI_CMD_SEND_DATA; *((unsigned char *)(port->write_urb->transfer_buffer)+1) = (unsigned char)priv->dp_out_buf_len; - - port->write_urb->transfer_buffer_length - = priv->dp_out_buf_len+2; + port->write_urb->transfer_buffer_length = priv->dp_out_buf_len+2; port->write_urb->dev = serial->dev; - - memcpy( port->write_urb->transfer_buffer+2, priv->dp_out_buf, - priv->dp_out_buf_len ); - - if( (ret=usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0 ) { + memcpy(port->write_urb->transfer_buffer+2, priv->dp_out_buf, + priv->dp_out_buf_len); + if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { priv->dp_write_urb_in_use = 1; priv->dp_out_buf_len = 0; } - } - /* wake up processes sleeping on writes immediately */ - digi_wakeup_write( port ); - + digi_wakeup_write(port); /* also queue up a wakeup at scheduler time, in case we */ /* lost the race in write_chan(). */ schedule_work(&priv->dp_wakeup_work); - spin_unlock( &priv->dp_port_lock ); - - if( ret ) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", __FUNCTION__, - ret, priv->dp_port_num ); - } - + spin_unlock(&priv->dp_port_lock); + if (ret) + err("%s: usb_submit_urb failed, ret=%d, port=%d", + __FUNCTION__, ret, priv->dp_port_num); } - -static int digi_write_room( struct usb_serial_port *port ) +static int digi_write_room(struct usb_serial_port *port) { int room; struct digi_port *priv = usb_get_serial_port_data(port); unsigned long flags = 0; + spin_lock_irqsave(&priv->dp_port_lock, flags); - spin_lock_irqsave( &priv->dp_port_lock, flags ); - - if( port->write_urb->status == -EINPROGRESS - || priv->dp_write_urb_in_use ) + if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) room = 0; else room = port->bulk_out_size - 2 - priv->dp_out_buf_len; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - -dbg( "digi_write_room: port=%d, room=%d", priv->dp_port_num, room ); - return( room ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + dbg("digi_write_room: port=%d, room=%d", priv->dp_port_num, room); + return room; } - -static int digi_chars_in_buffer( struct usb_serial_port *port ) +static int digi_chars_in_buffer(struct usb_serial_port *port) { struct digi_port *priv = usb_get_serial_port_data(port); - if( port->write_urb->status == -EINPROGRESS - || priv->dp_write_urb_in_use ) { -dbg( "digi_chars_in_buffer: port=%d, chars=%d", priv->dp_port_num, port->bulk_out_size - 2 ); - /* return( port->bulk_out_size - 2 ); */ - return( 256 ); + if (port->write_urb->status == -EINPROGRESS + || priv->dp_write_urb_in_use) { + dbg("digi_chars_in_buffer: port=%d, chars=%d", + priv->dp_port_num, port->bulk_out_size - 2); + /* return(port->bulk_out_size - 2); */ + return 256; } else { -dbg( "digi_chars_in_buffer: port=%d, chars=%d", priv->dp_port_num, priv->dp_out_buf_len ); - return( priv->dp_out_buf_len ); + dbg("digi_chars_in_buffer: port=%d, chars=%d", + priv->dp_port_num, priv->dp_out_buf_len); + return priv->dp_out_buf_len; } } -static int digi_open( struct usb_serial_port *port, struct file *filp ) +static int digi_open(struct usb_serial_port *port, struct file *filp) { - int ret; unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; unsigned long flags = 0; - -dbg( "digi_open: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_count ); + dbg("digi_open: TOP: port=%d, open_count=%d", + priv->dp_port_num, port->open_count); /* be sure the device is started up */ - if( digi_startup_device( port->serial ) != 0 ) - return( -ENXIO ); + if (digi_startup_device(port->serial) != 0) + return -ENXIO; - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); /* don't wait on a close in progress for non-blocking opens */ - if( priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0 ) { - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - return( -EAGAIN ); + if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return -EAGAIN; } /* wait for a close in progress to finish */ - while( priv->dp_in_close ) { + while(priv->dp_in_close) { cond_wait_interruptible_timeout_irqrestore( &priv->dp_close_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags ); - if( signal_pending(current) ) { - return( -EINTR ); - } - spin_lock_irqsave( &priv->dp_port_lock, flags ); + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); } - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); /* read modem signals automatically whenever they change */ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; @@ -1486,23 +1381,22 @@ dbg( "digi_open: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_cou buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; buf[7] = 0; - if( (ret=digi_write_oob_command( port, buf, 8, 1 )) != 0 ) - dbg( "digi_open: write oob failed, ret=%d", ret ); + if ((ret = digi_write_oob_command(port, buf, 8, 1)) != 0) + dbg("digi_open: write oob failed, ret=%d", ret); /* set termios settings */ not_termios.c_cflag = ~port->tty->termios->c_cflag; not_termios.c_iflag = ~port->tty->termios->c_iflag; - digi_set_termios( port, ¬_termios ); + digi_set_termios(port, ¬_termios); /* set DTR and RTS */ - digi_set_modem_signals( port, TIOCM_DTR|TIOCM_RTS, 1 ); - - return( 0 ); + digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1); + return 0; } -static void digi_close( struct usb_serial_port *port, struct file *filp ) +static void digi_close(struct usb_serial_port *port, struct file *filp) { DEFINE_WAIT(wait); int ret; @@ -1511,40 +1405,37 @@ static void digi_close( struct usb_serial_port *port, struct file *filp ) struct digi_port *priv = usb_get_serial_port_data(port); unsigned long flags = 0; - -dbg( "digi_close: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_count ); - + dbg("digi_close: TOP: port=%d, open_count=%d", + priv->dp_port_num, port->open_count); /* if disconnected, just clear flags */ if (!usb_get_intfdata(port->serial->interface)) goto exit; /* do cleanup only after final close on this port */ - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); priv->dp_in_close = 1; - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); /* tell line discipline to process only XON/XOFF */ tty->closing = 1; /* wait for output to drain */ - if( (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0 ) { - tty_wait_until_sent( tty, DIGI_CLOSE_TIMEOUT ); - } + if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) + tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT); /* flush driver and line discipline buffers */ - if( tty->driver->flush_buffer ) - tty->driver->flush_buffer( tty ); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); tty_ldisc_flush(tty); if (port->serial->dev) { /* wait for transmit idle */ - if( (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0 ) { - digi_transmit_idle( port, DIGI_CLOSE_TIMEOUT ); + if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); } - /* drop DTR and RTS */ - digi_set_modem_signals( port, 0, 0 ); + digi_set_modem_signals(port, 0, 0); /* disable input flow control */ buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; @@ -1576,8 +1467,8 @@ dbg( "digi_close: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_co buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; buf[19] = 0; - if( (ret=digi_write_oob_command( port, buf, 20, 0 )) != 0 ) - dbg( "digi_close: write oob failed, ret=%d", ret ); + if ((ret = digi_write_oob_command(port, buf, 20, 0)) != 0) + dbg("digi_close: write oob failed, ret=%d", ret); /* wait for final commands on oob port to complete */ prepare_to_wait(&priv->dp_flush_wait, &wait, TASK_INTERRUPTIBLE); @@ -1587,17 +1478,14 @@ dbg( "digi_close: TOP: port=%d, open_count=%d", priv->dp_port_num, port->open_co /* shutdown any outstanding bulk writes */ usb_kill_urb(port->write_urb); } - tty->closing = 0; - exit: - spin_lock_irqsave( &priv->dp_port_lock, flags ); + spin_lock_irqsave(&priv->dp_port_lock, flags); priv->dp_write_urb_in_use = 0; priv->dp_in_close = 0; - wake_up_interruptible( &priv->dp_close_wait ); - spin_unlock_irqrestore( &priv->dp_port_lock, flags ); - -dbg( "digi_close: done" ); + wake_up_interruptible(&priv->dp_close_wait); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + dbg("digi_close: done"); } @@ -1608,155 +1496,136 @@ dbg( "digi_close: done" ); * urbs initialized. Returns 0 if successful, non-zero error otherwise. */ -static int digi_startup_device( struct usb_serial *serial ) +static int digi_startup_device(struct usb_serial *serial) { - int i,ret = 0; struct digi_serial *serial_priv = usb_get_serial_data(serial); struct usb_serial_port *port; - /* be sure this happens exactly once */ - spin_lock( &serial_priv->ds_serial_lock ); - if( serial_priv->ds_device_started ) { - spin_unlock( &serial_priv->ds_serial_lock ); - return( 0 ); + spin_lock(&serial_priv->ds_serial_lock); + if (serial_priv->ds_device_started) { + spin_unlock(&serial_priv->ds_serial_lock); + return 0; } serial_priv->ds_device_started = 1; - spin_unlock( &serial_priv->ds_serial_lock ); + spin_unlock(&serial_priv->ds_serial_lock); /* start reading from each bulk in endpoint for the device */ /* set USB_DISABLE_SPD flag for write bulk urbs */ - for( i=0; i<serial->type->num_ports+1; i++ ) { - + for (i = 0; i < serial->type->num_ports + 1; i++) { port = serial->port[i]; - port->write_urb->dev = port->serial->dev; - - if( (ret=usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0 ) { - err("%s: usb_submit_urb failed, ret=%d, port=%d", __FUNCTION__, - ret, i ); + if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) { + err("%s: usb_submit_urb failed, ret=%d, port=%d", + __FUNCTION__, ret, i); break; } - } - - return( ret ); - + return ret; } -static int digi_startup( struct usb_serial *serial ) +static int digi_startup(struct usb_serial *serial) { int i; struct digi_port *priv; struct digi_serial *serial_priv; - -dbg( "digi_startup: TOP" ); + dbg("digi_startup: TOP"); /* allocate the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ - for( i=0; i<serial->type->num_ports+1; i++ ) { - + for(i = 0; i < serial->type->num_ports + 1; i++) { /* allocate port private structure */ - priv = kmalloc( sizeof(struct digi_port), - GFP_KERNEL ); - if( priv == (struct digi_port *)0 ) { - while( --i >= 0 ) - kfree( usb_get_serial_port_data(serial->port[i]) ); - return( 1 ); /* error */ + priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL); + if (priv == NULL) { + while (--i >= 0) + kfree(usb_get_serial_port_data(serial->port[i])); + return 1; /* error */ } /* initialize port private structure */ - spin_lock_init( &priv->dp_port_lock ); + spin_lock_init(&priv->dp_port_lock); priv->dp_port_num = i; priv->dp_out_buf_len = 0; priv->dp_write_urb_in_use = 0; priv->dp_modem_signals = 0; - init_waitqueue_head( &priv->dp_modem_change_wait ); + init_waitqueue_head(&priv->dp_modem_change_wait); priv->dp_transmit_idle = 0; - init_waitqueue_head( &priv->dp_transmit_idle_wait ); + init_waitqueue_head(&priv->dp_transmit_idle_wait); priv->dp_throttled = 0; priv->dp_throttle_restart = 0; - init_waitqueue_head( &priv->dp_flush_wait ); + init_waitqueue_head(&priv->dp_flush_wait); priv->dp_in_close = 0; - init_waitqueue_head( &priv->dp_close_wait ); + init_waitqueue_head(&priv->dp_close_wait); INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); priv->dp_port = serial->port[i]; - /* initialize write wait queue for this port */ - init_waitqueue_head( &serial->port[i]->write_wait ); + init_waitqueue_head(&serial->port[i]->write_wait); usb_set_serial_port_data(serial->port[i], priv); } /* allocate serial private structure */ - serial_priv = kmalloc( sizeof(struct digi_serial), - GFP_KERNEL ); - if( serial_priv == (struct digi_serial *)0 ) { - for( i=0; i<serial->type->num_ports+1; i++ ) - kfree( usb_get_serial_port_data(serial->port[i]) ); - return( 1 ); /* error */ + serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL); + if (serial_priv == NULL) { + for (i = 0; i < serial->type->num_ports + 1; i++) + kfree(usb_get_serial_port_data(serial->port[i])); + return 1; /* error */ } /* initialize serial private structure */ - spin_lock_init( &serial_priv->ds_serial_lock ); + spin_lock_init(&serial_priv->ds_serial_lock); serial_priv->ds_oob_port_num = serial->type->num_ports; serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; serial_priv->ds_device_started = 0; usb_set_serial_data(serial, serial_priv); - return( 0 ); - + return 0; } -static void digi_shutdown( struct usb_serial *serial ) +static void digi_shutdown(struct usb_serial *serial) { - int i; - - -dbg( "digi_shutdown: TOP, in_interrupt()=%ld", in_interrupt() ); + dbg("digi_shutdown: TOP, in_interrupt()=%ld", in_interrupt()); /* stop reads and writes on all ports */ - for( i=0; i<serial->type->num_ports+1; i++ ) { + for (i = 0; i < serial->type->num_ports + 1; i++) { usb_kill_urb(serial->port[i]->read_urb); usb_kill_urb(serial->port[i]->write_urb); } /* free the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ - for( i=0; i<serial->type->num_ports+1; i++ ) - kfree( usb_get_serial_port_data(serial->port[i]) ); - kfree( usb_get_serial_data(serial) ); + for(i = 0; i < serial->type->num_ports + 1; i++) + kfree(usb_get_serial_port_data(serial->port[i])); + kfree(usb_get_serial_data(serial)); } -static void digi_read_bulk_callback( struct urb *urb ) +static void digi_read_bulk_callback(struct urb *urb) { - struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct digi_port *priv; struct digi_serial *serial_priv; int ret; int status = urb->status; - -dbg( "digi_read_bulk_callback: TOP" ); + dbg("digi_read_bulk_callback: TOP"); /* port sanity check, do not resubmit if port is not valid */ - if( port == NULL || (priv=usb_get_serial_port_data(port)) == NULL ) { + if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { err("%s: port or port->private is NULL, status=%d", __FUNCTION__, status); return; } - if( port->serial == NULL - || (serial_priv=usb_get_serial_data(port->serial)) == NULL ) { + if (port->serial == NULL || + (serial_priv=usb_get_serial_data(port->serial)) == NULL) { err("%s: serial is bad or serial->private is NULL, status=%d", - __FUNCTION__, status); + __FUNCTION__, status); return; } @@ -1768,24 +1637,23 @@ dbg( "digi_read_bulk_callback: TOP" ); } /* handle oob or inb callback, do not resubmit if error */ - if( priv->dp_port_num == serial_priv->ds_oob_port_num ) { - if( digi_read_oob_callback( urb ) != 0 ) + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + if (digi_read_oob_callback(urb) != 0) return; } else { - if( digi_read_inb_callback( urb ) != 0 ) + if (digi_read_inb_callback(urb) != 0) return; } /* continue read */ urb->dev = port->serial->dev; - if( (ret=usb_submit_urb(urb, GFP_ATOMIC)) != 0 ) { - err("%s: failed resubmitting urb, ret=%d, port=%d", __FUNCTION__, - ret, priv->dp_port_num ); + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + err("%s: failed resubmitting urb, ret=%d, port=%d", + __FUNCTION__, ret, priv->dp_port_num); } } - /* * Digi Read INB Callback * @@ -1796,7 +1664,7 @@ dbg( "digi_read_bulk_callback: TOP" ); * throttled, and -1 if the sanity checks failed. */ -static int digi_read_inb_callback( struct urb *urb ) +static int digi_read_inb_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; @@ -1812,72 +1680,67 @@ static int digi_read_inb_callback( struct urb *urb ) /* do not process callbacks on closed ports */ /* but do continue the read chain */ - if( port->open_count == 0 ) - return( 0 ); + if (port->open_count == 0) + return 0; /* short/multiple packet check */ - if( urb->actual_length != len + 2 ) { - err("%s: INCOMPLETE OR MULTIPLE PACKET, urb status=%d, " + if (urb->actual_length != len + 2) { + err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, " "port=%d, opcode=%d, len=%d, actual_length=%d, " - "port_status=%d", __FUNCTION__, status, priv->dp_port_num, + "status=%d", __FUNCTION__, status, priv->dp_port_num, opcode, len, urb->actual_length, port_status); - return( -1 ); + return -1; } - spin_lock( &priv->dp_port_lock ); + spin_lock(&priv->dp_port_lock); /* check for throttle; if set, do not resubmit read urb */ /* indicate the read chain needs to be restarted on unthrottle */ throttled = priv->dp_throttled; - if( throttled ) + if (throttled) priv->dp_throttle_restart = 1; /* receive data */ - if( opcode == DIGI_CMD_RECEIVE_DATA ) { - + if (opcode == DIGI_CMD_RECEIVE_DATA) { /* get flag from port_status */ flag = 0; /* overrun is special, not associated with a char */ - if (port_status & DIGI_OVERRUN_ERROR) { - tty_insert_flip_char( tty, 0, TTY_OVERRUN ); - } + if (port_status & DIGI_OVERRUN_ERROR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); /* break takes precedence over parity, */ /* which takes precedence over framing errors */ - if (port_status & DIGI_BREAK_ERROR) { + if (port_status & DIGI_BREAK_ERROR) flag = TTY_BREAK; - } else if (port_status & DIGI_PARITY_ERROR) { + else if (port_status & DIGI_PARITY_ERROR) flag = TTY_PARITY; - } else if (port_status & DIGI_FRAMING_ERROR) { + else if (port_status & DIGI_FRAMING_ERROR) flag = TTY_FRAME; - } /* data length is len-1 (one byte of len is port_status) */ --len; len = tty_buffer_request_room(tty, len); - if( len > 0 ) { + if (len > 0) { /* Hot path */ - if(flag == TTY_NORMAL) + if (flag == TTY_NORMAL) tty_insert_flip_string(tty, data, len); else { for(i = 0; i < len; i++) tty_insert_flip_char(tty, data[i], flag); } - tty_flip_buffer_push( tty ); + tty_flip_buffer_push(tty); } } + spin_unlock(&priv->dp_port_lock); - spin_unlock( &priv->dp_port_lock ); - - if( opcode == DIGI_CMD_RECEIVE_DISABLE ) { - dbg("%s: got RECEIVE_DISABLE", __FUNCTION__ ); - } else if( opcode != DIGI_CMD_RECEIVE_DATA ) { - dbg("%s: unknown opcode: %d", __FUNCTION__, opcode ); - } + if (opcode == DIGI_CMD_RECEIVE_DISABLE) + dbg("%s: got RECEIVE_DISABLE", __FUNCTION__); + else if (opcode != DIGI_CMD_RECEIVE_DATA) + dbg("%s: unknown opcode: %d", __FUNCTION__, opcode); - return( throttled ? 1 : 0 ); + return(throttled ? 1 : 0); } @@ -1891,7 +1754,7 @@ static int digi_read_inb_callback( struct urb *urb ) * -1 if the sanity checks failed. */ -static int digi_read_oob_callback( struct urb *urb ) +static int digi_read_oob_callback(struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; @@ -1900,87 +1763,75 @@ static int digi_read_oob_callback( struct urb *urb ) int opcode, line, status, val; int i; - -dbg( "digi_read_oob_callback: port=%d, len=%d", priv->dp_port_num, -urb->actual_length ); + dbg("digi_read_oob_callback: port=%d, len=%d", + priv->dp_port_num, urb->actual_length); /* handle each oob command */ - for( i=0; i<urb->actual_length-3; ) { - + for(i = 0; i < urb->actual_length - 3;) { opcode = ((unsigned char *)urb->transfer_buffer)[i++]; line = ((unsigned char *)urb->transfer_buffer)[i++]; status = ((unsigned char *)urb->transfer_buffer)[i++]; val = ((unsigned char *)urb->transfer_buffer)[i++]; -dbg( "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d", -opcode, line, status, val ); + dbg("digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d", + opcode, line, status, val); - if( status != 0 || line >= serial->type->num_ports ) + if (status != 0 || line >= serial->type->num_ports) continue; port = serial->port[line]; - if ((priv=usb_get_serial_port_data(port)) == NULL ) + if ((priv=usb_get_serial_port_data(port)) == NULL) return -1; - if( opcode == DIGI_CMD_READ_INPUT_SIGNALS ) { - - spin_lock( &priv->dp_port_lock ); - + if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { + spin_lock(&priv->dp_port_lock); /* convert from digi flags to termiox flags */ - if( val & DIGI_READ_INPUT_SIGNALS_CTS ) { + if (val & DIGI_READ_INPUT_SIGNALS_CTS) { priv->dp_modem_signals |= TIOCM_CTS; /* port must be open to use tty struct */ - if( port->open_count - && port->tty->termios->c_cflag & CRTSCTS ) { + if (port->open_count + && port->tty->termios->c_cflag & CRTSCTS) { port->tty->hw_stopped = 0; - digi_wakeup_write( port ); + digi_wakeup_write(port); } } else { priv->dp_modem_signals &= ~TIOCM_CTS; /* port must be open to use tty struct */ - if( port->open_count - && port->tty->termios->c_cflag & CRTSCTS ) { + if (port->open_count + && port->tty->termios->c_cflag & CRTSCTS) { port->tty->hw_stopped = 1; } } - if( val & DIGI_READ_INPUT_SIGNALS_DSR ) + if (val & DIGI_READ_INPUT_SIGNALS_DSR) priv->dp_modem_signals |= TIOCM_DSR; else priv->dp_modem_signals &= ~TIOCM_DSR; - if( val & DIGI_READ_INPUT_SIGNALS_RI ) + if (val & DIGI_READ_INPUT_SIGNALS_RI) priv->dp_modem_signals |= TIOCM_RI; else priv->dp_modem_signals &= ~TIOCM_RI; - if( val & DIGI_READ_INPUT_SIGNALS_DCD ) + if (val & DIGI_READ_INPUT_SIGNALS_DCD) priv->dp_modem_signals |= TIOCM_CD; else priv->dp_modem_signals &= ~TIOCM_CD; - wake_up_interruptible( &priv->dp_modem_change_wait ); - spin_unlock( &priv->dp_port_lock ); - - } else if( opcode == DIGI_CMD_TRANSMIT_IDLE ) { - - spin_lock( &priv->dp_port_lock ); + wake_up_interruptible(&priv->dp_modem_change_wait); + spin_unlock(&priv->dp_port_lock); + } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) { + spin_lock(&priv->dp_port_lock); priv->dp_transmit_idle = 1; - wake_up_interruptible( &priv->dp_transmit_idle_wait ); - spin_unlock( &priv->dp_port_lock ); - - } else if( opcode == DIGI_CMD_IFLUSH_FIFO ) { - - wake_up_interruptible( &priv->dp_flush_wait ); - + wake_up_interruptible(&priv->dp_transmit_idle_wait); + spin_unlock(&priv->dp_port_lock); + } else if (opcode == DIGI_CMD_IFLUSH_FIFO) { + wake_up_interruptible(&priv->dp_flush_wait); } - } - - return( 0 ); + return 0; } - -static int __init digi_init (void) +static int __init digi_init(void) { int retval; retval = usb_serial_register(&digi_acceleport_2_device); @@ -2002,12 +1853,11 @@ failed_acceleport_2_device: return retval; } - static void __exit digi_exit (void) { - usb_deregister (&digi_driver); - usb_serial_deregister (&digi_acceleport_2_device); - usb_serial_deregister (&digi_acceleport_4_device); + usb_deregister(&digi_driver); + usb_serial_deregister(&digi_acceleport_2_device); + usb_serial_deregister(&digi_acceleport_4_device); } @@ -2015,8 +1865,8 @@ module_init(digi_init); module_exit(digi_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dd42f57089ff..2ecb1d2a034d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2366,9 +2366,8 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa int status; unsigned char number = edge_port->port->number - edge_port->port->serial->minor; - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d", edge_port->port->number, baudRate); return 0; @@ -2461,18 +2460,16 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue); - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) && - (regNum == MCR))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && + regNum == MCR) { dbg("SendCmdWriteUartReg - Not writing to MCR Register"); return 0; } - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) && - (regNum == LCR))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && + regNum == LCR) { dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; } diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 2a3fabcf5186..e08c9bb403d8 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -184,21 +184,21 @@ struct mct_u232_private { * we do not know how to support. We ignore them for the moment. * XXX Rate-limit the error message, it's user triggerable. */ -static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value) { if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { switch (value) { - case B300: return 0x01; - case B600: return 0x02; /* this one not tested */ - case B1200: return 0x03; - case B2400: return 0x04; - case B4800: return 0x06; - case B9600: return 0x08; - case B19200: return 0x09; - case B38400: return 0x0a; - case B57600: return 0x0b; - case B115200: return 0x0c; + case 300: return 0x01; + case 600: return 0x02; /* this one not tested */ + case 1200: return 0x03; + case 2400: return 0x04; + case 4800: return 0x06; + case 9600: return 0x08; + case 19200: return 0x09; + case 38400: return 0x0a; + case 57600: return 0x0b; + case 115200: return 0x0c; default: err("MCT USB-RS232: unsupported baudrate request 0x%x," " using default of B9600", value); @@ -206,27 +206,27 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) } } else { switch (value) { - case B300: value = 300; break; - case B600: value = 600; break; - case B1200: value = 1200; break; - case B2400: value = 2400; break; - case B4800: value = 4800; break; - case B9600: value = 9600; break; - case B19200: value = 19200; break; - case B38400: value = 38400; break; - case B57600: value = 57600; break; - case B115200: value = 115200; break; - default: - err("MCT USB-RS232: unsupported baudrate request 0x%x," - " using default of B9600", value); - value = 9600; + case 300: break; + case 600: break; + case 1200: break; + case 2400: break; + case 4800: break; + case 9600: break; + case 19200: break; + case 38400: break; + case 57600: break; + case 115200: break; + default: + err("MCT USB-RS232: unsupported baudrate request 0x%x," + " using default of B9600", value); + value = 9600; } return 115200/value; } } static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port, - int value) + speed_t value) { __le32 divisor; int rc; @@ -634,7 +634,7 @@ static void mct_u232_set_termios (struct usb_serial_port *port, mct_u232_set_modem_ctrl(serial, control_state); } - mct_u232_set_baud_rate(serial, port, cflag & CBAUD); + mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty)); if ((cflag & CBAUD) == B0 ) { dbg("%s: baud is B0", __FUNCTION__); diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index a61bac8f224a..aae10c8174d6 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -79,7 +79,7 @@ * and "Intel solution". They are the regular MCT and "Sitecom" for us. * This is pointless to document in the header, see the code for the bits. */ -static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value); +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value); /* * Line Control Register (LCR) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0794ccdebfd4..0bb8de4cc524 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -45,7 +45,7 @@ enum devicetype { DEVICE_INSTALLER = 2, }; -int sierra_set_power_state(struct usb_device *udev, __u16 swiState) +static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; dev_dbg(&udev->dev, "%s", "SET POWER STATE"); @@ -60,7 +60,7 @@ int sierra_set_power_state(struct usb_device *udev, __u16 swiState) return result; } -int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode) +static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode) { int result; dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH"); @@ -75,7 +75,8 @@ int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode) return result; } -int sierra_probe(struct usb_interface *iface, const struct usb_device_id *id) +static int sierra_probe(struct usb_interface *iface, + const struct usb_device_id *id) { int result; struct usb_device *udev; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a3665659d13b..9bf01a5efc84 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -60,19 +60,19 @@ static struct usb_driver usb_serial_driver = { static int debug; static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */ -static spinlock_t table_lock; +static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); struct usb_serial *usb_serial_get_by_index(unsigned index) { struct usb_serial *serial; - spin_lock(&table_lock); + mutex_lock(&table_lock); serial = serial_table[index]; if (serial) kref_get(&serial->kref); - spin_unlock(&table_lock); + mutex_unlock(&table_lock); return serial; } @@ -84,7 +84,7 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po dbg("%s %d", __FUNCTION__, num_ports); *minor = 0; - spin_lock(&table_lock); + mutex_lock(&table_lock); for (i = 0; i < SERIAL_TTY_MINORS; ++i) { if (serial_table[i]) continue; @@ -106,10 +106,10 @@ static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_po serial_table[i] = serial; serial->port[j++]->number = i; } - spin_unlock(&table_lock); + mutex_unlock(&table_lock); return serial; } - spin_unlock(&table_lock); + mutex_unlock(&table_lock); return NULL; } @@ -172,9 +172,9 @@ static void destroy_serial(struct kref *kref) void usb_serial_put(struct usb_serial *serial) { - spin_lock(&table_lock); + mutex_lock(&table_lock); kref_put(&serial->kref, destroy_serial); - spin_unlock(&table_lock); + mutex_unlock(&table_lock); } /***************************************************************************** @@ -1077,16 +1077,17 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) struct usb_serial_port *port; int i, r = 0; - if (serial) { - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - if (port) - kill_traffic(port); - } + if (!serial) /* device has been disconnected */ + return 0; + + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) + kill_traffic(port); } if (serial->type->suspend) - serial->type->suspend(serial, message); + r = serial->type->suspend(serial, message); return r; } @@ -1128,7 +1129,6 @@ static int __init usb_serial_init(void) return -ENOMEM; /* Initialize our global data */ - spin_lock_init(&table_lock); for (i = 0; i < SERIAL_TTY_MINORS; ++i) { serial_table[i] = NULL; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a624e72f81dc..d8d008d42946 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -320,6 +320,13 @@ UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */ +UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100, + "NIKON", + "NIKON DSC D50", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Andreas Bockhold <andreas@bockionline.de> */ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100, "NIKON", @@ -1357,6 +1364,20 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Jeremy Katz <katzj@redhat.com>: + * The Blackberry Pearl can run in two modes; a usb-storage only mode + * and a mode that allows access via mass storage and to its database. + * The berry_charge module will set the device to dual mode and thus we + * should ignore its native mode if that module is built + */ +#ifdef CONFIG_USB_BERRY_CHARGE +UNUSUAL_DEV( 0x0fca, 0x0006, 0x0001, 0x0001, + "RIM", + "Blackberry Pearl", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), +#endif + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", |