diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/qla1280.c | 7 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/gbefb.c | 4 | ||||
| -rw-r--r-- | drivers/video/logo/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/video/logo/logo.c | 2 | ||||
| -rw-r--r-- | drivers/video/sgivwfb.c | 889 |
8 files changed, 3 insertions, 914 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 17d2b07ee67c..9d5ee4dcee7d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC) += setup-bus.o obj-$(CONFIG_FRV) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o -obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 97dabd39b092..158020522dfb 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -379,14 +379,7 @@ #define DEBUG_PRINT_NVRAM 0 #define DEBUG_QLA1280 0 -/* - * The SGI VISWS is broken and doesn't support MMIO ;-( - */ -#ifdef CONFIG_X86_VISWS -#define MEMORY_MAPPED_IO 0 -#else #define MEMORY_MAPPED_IO 1 -#endif #include "qla1280.h" diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 22262a3a0e2d..acc049359366 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -802,18 +802,9 @@ config FB_HGA As this card technology is at least 25 years old, most people will answer N here. -config FB_SGIVW - tristate "SGI Visual Workstation framebuffer support" - depends on FB && X86_VISWS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - SGI Visual Workstation support for framebuffer graphics. - config FB_GBE bool "SGI Graphics Backend frame buffer support" - depends on (FB = y) && (SGI_IP32 || X86_VISWS) + depends on (FB = y) && SGI_IP32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/Makefile b/drivers/video/Makefile index ae17ddf49a00..dc096179e93e 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 4c7cb368a9dc..3ec65a878ac8 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -45,10 +45,6 @@ struct gbefb_par { #define GBE_BASE 0x16000000 /* SGI O2 */ #endif -#ifdef CONFIG_X86_VISWS -#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */ -#endif - /* macro for fastest write-though access to the framebuffer */ #ifdef CONFIG_MIPS #ifdef CONFIG_CPU_R10000 diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index 39ac49e0682c..0037104d66ac 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224 config LOGO_SGI_CLUT224 bool "224-color SGI Linux logo" - depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS + depends on SGI_IP22 || SGI_IP27 || SGI_IP32 default y config LOGO_SUN_CLUT224 diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index b670cbda38e3..940cd196eef5 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth) logo = &logo_parisc_clut224; #endif #ifdef CONFIG_LOGO_SGI_CLUT224 - /* SGI Linux logo on MIPS/MIPS64 and VISWS */ + /* SGI Linux logo on MIPS/MIPS64 */ logo = &logo_sgi_clut224; #endif #ifdef CONFIG_LOGO_SUN_CLUT224 diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c deleted file mode 100644 index bc74d0408998..000000000000 --- a/drivers/video/sgivwfb.c +++ /dev/null @@ -1,889 +0,0 @@ -/* - * linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Jeffrey Newquist, newquist@engr.sgi.som - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/mtrr.h> -#include <asm/visws/sgivw.h> - -#define INCLUDE_TIMING_TABLE_DATA -#define DBE_REG_BASE par->regs -#include <video/sgivw.h> - -struct sgivw_par { - struct asregs *regs; - u32 cmap_fifo; - u_long timing_num; -}; - -#define FLATPANEL_SGI_1600SW 5 - -/* - * RAM we reserve for the frame buffer. This defines the maximum screen - * size - * - * The default can be overridden if the driver is compiled as a module - */ - -static int ypan = 0; -static int ywrap = 0; - -static int flatpanel_id = -1; - -static struct fb_fix_screeninfo sgivwfb_fix = { - .id = "SGI Vis WS FB", - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_PSEUDOCOLOR, - .mmio_start = DBE_REG_PHYS, - .mmio_len = DBE_REG_SIZE, - .accel = FB_ACCEL_NONE, - .line_length = 640, -}; - -static struct fb_var_screeninfo sgivwfb_var = { - /* 640x480, 8 bpp */ - .xres = 640, - .yres = 480, - .xres_virtual = 640, - .yres_virtual = 480, - .bits_per_pixel = 8, - .red = { 0, 8, 0 }, - .green = { 0, 8, 0 }, - .blue = { 0, 8, 0 }, - .height = -1, - .width = -1, - .pixclock = 20000, - .left_margin = 64, - .right_margin = 64, - .upper_margin = 32, - .lower_margin = 32, - .hsync_len = 64, - .vsync_len = 2, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_var_screeninfo sgivwfb_var1600sw = { - /* 1600x1024, 8 bpp */ - .xres = 1600, - .yres = 1024, - .xres_virtual = 1600, - .yres_virtual = 1024, - .bits_per_pixel = 8, - .red = { 0, 8, 0 }, - .green = { 0, 8, 0 }, - .blue = { 0, 8, 0 }, - .height = -1, - .width = -1, - .pixclock = 9353, - .left_margin = 20, - .right_margin = 30, - .upper_margin = 37, - .lower_margin = 3, - .hsync_len = 20, - .vsync_len = 3, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * Interface used by the world - */ -int sgivwfb_init(void); - -static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); -static int sgivwfb_set_par(struct fb_info *info); -static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green, - u_int blue, u_int transp, - struct fb_info *info); -static int sgivwfb_mmap(struct fb_info *info, - struct vm_area_struct *vma); - -static struct fb_ops sgivwfb_ops = { - .owner = THIS_MODULE, - .fb_check_var = sgivwfb_check_var, - .fb_set_par = sgivwfb_set_par, - .fb_setcolreg = sgivwfb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, - .fb_mmap = sgivwfb_mmap, -}; - -/* - * Internal routines - */ -static unsigned long bytes_per_pixel(int bpp) -{ - switch (bpp) { - case 8: - return 1; - case 16: - return 2; - case 32: - return 4; - default: - printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp); - return 0; - } -} - -static unsigned long get_line_length(int xres_virtual, int bpp) -{ - return (xres_virtual * bytes_per_pixel(bpp)); -} - -/* - * Function: dbe_TurnOffDma - * Parameters: (None) - * Description: This should turn off the monitor and dbe. This is used - * when switching between the serial console and the graphics - * console. - */ - -static void dbe_TurnOffDma(struct sgivw_par *par) -{ - unsigned int readVal; - int i; - - // Check to see if things are already turned off: - // 1) Check to see if dbe is not using the internal dotclock. - // 2) Check to see if the xy counter in dbe is already off. - - DBE_GETREG(ctrlstat, readVal); - if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2) - return; - - DBE_GETREG(vt_xy, readVal); - if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) - return; - - // Otherwise, turn off dbe - - DBE_GETREG(ovr_control, readVal); - SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0); - DBE_SETREG(ovr_control, readVal); - udelay(1000); - DBE_GETREG(frm_control, readVal); - SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0); - DBE_SETREG(frm_control, readVal); - udelay(1000); - DBE_GETREG(did_control, readVal); - SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0); - DBE_SETREG(did_control, readVal); - udelay(1000); - - // XXX HACK: - // - // This was necessary for GBE--we had to wait through two - // vertical retrace periods before the pixel DMA was - // turned off for sure. I've left this in for now, in - // case dbe needs it. - - for (i = 0; i < 10000; i++) { - DBE_GETREG(frm_inhwctrl, readVal); - if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) == - 0) - udelay(10); - else { - DBE_GETREG(ovr_inhwctrl, readVal); - if (GET_DBE_FIELD - (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0) - udelay(10); - else { - DBE_GETREG(did_inhwctrl, readVal); - if (GET_DBE_FIELD - (DID_INHWCTRL, DID_DMA_ENABLE, - readVal) == 0) - udelay(10); - else - break; - } - } - } -} - -/* - * Set the User Defined Part of the Display. Again if par use it to get - * real video mode. - */ -static int sgivwfb_check_var(struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct sgivw_par *par = (struct sgivw_par *)info->par; - struct dbe_timing_info *timing; - u_long line_length; - u_long min_mode; - int req_dot; - int test_mode; - - /* - * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal! - * as FB_VMODE_SMOOTH_XPAN is only used internally - */ - - if (var->vmode & FB_VMODE_CONUPDATE) { - var->vmode |= FB_VMODE_YWRAP; - var->xoffset = info->var.xoffset; - var->yoffset = info->var.yoffset; - } - - /* XXX FIXME - forcing var's */ - var->xoffset = 0; - var->yoffset = 0; - - /* Limit bpp to 8, 16, and 32 */ - if (var->bits_per_pixel <= 8) - var->bits_per_pixel = 8; - else if (var->bits_per_pixel <= 16) - var->bits_per_pixel = 16; - else if (var->bits_per_pixel <= 32) - var->bits_per_pixel = 32; - else - return -EINVAL; - - var->grayscale = 0; /* No grayscale for now */ - - /* determine valid resolution and timing */ - for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) { - if (dbeVTimings[min_mode].width >= var->xres && - dbeVTimings[min_mode].height >= var->yres) - break; - } - - if (min_mode == ARRAY_SIZE(dbeVTimings)) - return -EINVAL; /* Resolution to high */ - - /* XXX FIXME - should try to pick best refresh rate */ - /* for now, pick closest dot-clock within 3MHz */ - req_dot = PICOS2KHZ(var->pixclock); - printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n", - var->pixclock, req_dot); - test_mode = min_mode; - while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) { - if (dbeVTimings[test_mode].cfreq + 3000 > req_dot) - break; - test_mode++; - } - if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width) - test_mode--; - min_mode = test_mode; - timing = &dbeVTimings[min_mode]; - printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq); - - /* Adjust virtual resolution, if necessary */ - if (var->xres > var->xres_virtual || (!ywrap && !ypan)) - var->xres_virtual = var->xres; - if (var->yres > var->yres_virtual || (!ywrap && !ypan)) - var->yres_virtual = var->yres; - - /* - * Memory limit - */ - line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); - if (line_length * var->yres_virtual > sgivwfb_mem_size) - return -ENOMEM; /* Virtual resolution to high */ - - info->fix.line_length = line_length; - - switch (var->bits_per_pixel) { - case 8: - var->red.offset = 0; - var->red.length = 8; - var->green.offset = 0; - var->green.length = 8; - var->blue.offset = 0; - var->blue.length = 8; - var->transp.offset = 0; - var->transp.length = 0; - break; - case 16: /* RGBA 5551 */ - var->red.offset = 11; - var->red.length = 5; - var->green.offset = 6; - var->green.length = 5; - var->blue.offset = 1; - var->blue.length = 5; - var->transp.offset = 0; - var->transp.length = 0; - break; - case 32: /* RGB 8888 */ - var->red.offset = 0; - var->red.length = 8; - var->green.offset = 8; - var->green.length = 8; - var->blue.offset = 16; - var->blue.length = 8; - var->transp.offset = 24; - var->transp.length = 8; - break; - } - var->red.msb_right = 0; - var->green.msb_right = 0; - var->blue.msb_right = 0; - var->transp.msb_right = 0; - - /* set video timing information */ - var->pixclock = KHZ2PICOS(timing->cfreq); - var->left_margin = timing->htotal - timing->hsync_end; - var->right_margin = timing->hsync_start - timing->width; - var->upper_margin = timing->vtotal - timing->vsync_end; - var->lower_margin = timing->vsync_start - timing->height; - var->hsync_len = timing->hsync_end - timing->hsync_start; - var->vsync_len = timing->vsync_end - timing->vsync_start; - - /* Ouch. This breaks the rules but timing_num is only important if you - * change a video mode */ - par->timing_num = min_mode; - - printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n", - var->xres, var->yres, var->bits_per_pixel); - printk(KERN_INFO " vxres=%d vyres=%d\n", var->xres_virtual, - var->yres_virtual); - return 0; -} - -/* - * Setup flatpanel related registers. - */ -static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming) -{ - int fp_wid, fp_hgt, fp_vbs, fp_vbe; - u32 outputVal = 0; - - SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, - (currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1); - SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, - (currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1); - DBE_SETREG(vt_flags, outputVal); - - /* Turn on the flat panel */ - switch (flatpanel_id) { - case FLATPANEL_SGI_1600SW: - fp_wid = 1600; - fp_hgt = 1024; - fp_vbs = 0; - fp_vbe = 1600; - currentTiming->pll_m = 4; - currentTiming->pll_n = 1; - currentTiming->pll_p = 0; - break; - default: - fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff; - } - - outputVal = 0; - SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs); - SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe); - DBE_SETREG(fp_de, outputVal); - outputVal = 0; - SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid); - DBE_SETREG(fp_hdrv, outputVal); - outputVal = 0; - SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1); - SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1); - DBE_SETREG(fp_vdrv, outputVal); -} - -/* - * Set the hardware according to 'par'. - */ -static int sgivwfb_set_par(struct fb_info *info) -{ - struct sgivw_par *par = info->par; - int i, j, htmp, temp; - u32 readVal, outputVal; - int wholeTilesX, maxPixelsPerTileX; - int frmWrite1, frmWrite2, frmWrite3b; - struct dbe_timing_info *currentTiming; /* Current Video Timing */ - int xpmax, ypmax; // Monitor resolution - int bytesPerPixel; // Bytes per pixel - - currentTiming = &dbeVTimings[par->timing_num]; - bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel); - xpmax = currentTiming->width; - ypmax = currentTiming->height; - - /* dbe_InitGraphicsBase(); */ - /* Turn on dotclock PLL */ - DBE_SETREG(ctrlstat, 0x20000000); - - dbe_TurnOffDma(par); - - /* dbe_CalculateScreenParams(); */ - maxPixelsPerTileX = 512 / bytesPerPixel; - wholeTilesX = xpmax / maxPixelsPerTileX; - if (wholeTilesX * maxPixelsPerTileX < xpmax) - wholeTilesX++; - - printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n", - maxPixelsPerTileX, wholeTilesX); - - /* dbe_InitGammaMap(); */ - udelay(10); - - for (i = 0; i < 256; i++) { - DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8)); - } - - /* dbe_TurnOn(); */ - DBE_GETREG(vt_xy, readVal); - if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) { - DBE_SETREG(vt_xy, 0x00000000); - udelay(1); - } else - dbe_TurnOffDma(par); - - /* dbe_Initdbe(); */ - for (i = 0; i < 256; i++) { - for (j = 0; j < 100; j++) { - DBE_GETREG(cm_fifo, readVal); - if (readVal != 0x00000000) - break; - else - udelay(10); - } - - // DBE_ISETREG(cmap, i, 0x00000000); - DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24)); - } - - /* dbe_InitFramebuffer(); */ - frmWrite1 = 0; - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1, - wholeTilesX); - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0); - - switch (bytesPerPixel) { - case 1: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_8); - break; - case 2: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_16); - break; - case 4: - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1, - DBE_FRM_DEPTH_32); - break; - } - - frmWrite2 = 0; - SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax); - - // Tell dbe about the framebuffer location and type - // XXX What format is the FRM_TILE_PTR?? 64K aligned address? - frmWrite3b = 0; - SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b, - sgivwfb_mem_phys >> 9); - SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1); - SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1); - - /* Initialize DIDs */ - - outputVal = 0; - switch (bytesPerPixel) { - case 1: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8); - break; - case 2: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5); - break; - case 4: - SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8); - break; - } - SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH); - - for (i = 0; i < 32; i++) { - DBE_ISETREG(mode_regs, i, outputVal); - } - - /* dbe_InitTiming(); */ - DBE_SETREG(vt_intr01, 0xffffffff); - DBE_SETREG(vt_intr23, 0xffffffff); - - DBE_GETREG(dotclock, readVal); - DBE_SETREG(dotclock, readVal & 0xffff); - - DBE_SETREG(vt_xymax, 0x00000000); - outputVal = 0; - SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal, - currentTiming->vsync_start); - SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal, - currentTiming->vsync_end); - DBE_SETREG(vt_vsync, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal, - currentTiming->hsync_start); - SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal, - currentTiming->hsync_end); - DBE_SETREG(vt_hsync, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vblank, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal, - currentTiming->hblank_start); - SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal, - currentTiming->hblank_end - 3); - DBE_SETREG(vt_hblank, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vcmap, outputVal); - outputVal = 0; - SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal, - currentTiming->hblank_start); - SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal, - currentTiming->hblank_end - 3); - DBE_SETREG(vt_hcmap, outputVal); - - if (flatpanel_id != -1) - sgivwfb_setup_flatpanel(par, currentTiming); - - outputVal = 0; - temp = currentTiming->vblank_start - currentTiming->vblank_end - 1; - if (temp > 0) - temp = -temp; - - SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp); - if (currentTiming->hblank_end >= 20) - SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal, - currentTiming->hblank_end - 20); - else - SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal, - currentTiming->htotal - (20 - - currentTiming-> - hblank_end)); - DBE_SETREG(did_start_xy, outputVal); - - outputVal = 0; - SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal, - (u32) (temp + 1)); - if (currentTiming->hblank_end >= DBE_CRS_MAGIC) - SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal, - currentTiming->hblank_end - DBE_CRS_MAGIC); - else - SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal, - currentTiming->htotal - (DBE_CRS_MAGIC - - currentTiming-> - hblank_end)); - DBE_SETREG(crs_start_xy, outputVal); - - outputVal = 0; - SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp); - SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal, - currentTiming->hblank_end - 4); - DBE_SETREG(vc_start_xy, outputVal); - - DBE_SETREG(frm_size_tile, frmWrite1); - DBE_SETREG(frm_size_pixel, frmWrite2); - - outputVal = 0; - SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1); - SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1); - SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p); - SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1); - DBE_SETREG(dotclock, outputVal); - - udelay(11 * 1000); - - DBE_SETREG(vt_vpixen, 0xffffff); - DBE_SETREG(vt_hpixen, 0xffffff); - - outputVal = 0; - SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal); - SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal); - DBE_SETREG(vt_xymax, outputVal); - - outputVal = frmWrite1; - SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1); - DBE_SETREG(frm_size_tile, outputVal); - DBE_SETREG(frm_size_tile, frmWrite1); - - outputVal = 0; - SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1); - DBE_SETREG(ovr_width_tile, outputVal); - DBE_SETREG(ovr_width_tile, 0); - - DBE_SETREG(frm_control, frmWrite3b); - DBE_SETREG(did_control, 0); - - // Wait for dbe to take frame settings - for (i = 0; i < 100000; i++) { - DBE_GETREG(frm_inhwctrl, readVal); - if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) != - 0) - break; - else - udelay(1); - } - - if (i == 100000) - printk(KERN_INFO - "sgivwfb: timeout waiting for frame DMA enable.\n"); - - outputVal = 0; - htmp = currentTiming->hblank_end - 19; - if (htmp < 0) - htmp += currentTiming->htotal; /* allow blank to wrap around */ - SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp); - SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal, - ((htmp + currentTiming->width - - 2) % currentTiming->htotal)); - DBE_SETREG(vt_hpixen, outputVal); - - outputVal = 0; - SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal, - currentTiming->vblank_start); - SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal, - currentTiming->vblank_end); - DBE_SETREG(vt_vpixen, outputVal); - - // Turn off mouse cursor - par->regs->crs_ctl = 0; - - // XXX What's this section for?? - DBE_GETREG(ctrlstat, readVal); - readVal &= 0x02000000; - - if (readVal != 0) { - DBE_SETREG(ctrlstat, 0x30000000); - } - return 0; -} - -/* - * Set a single color register. The values supplied are already - * rounded down to the hardware's capabilities (according to the - * entries in the var structure). Return != 0 for invalid regno. - */ - -static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green, - u_int blue, u_int transp, - struct fb_info *info) -{ - struct sgivw_par *par = (struct sgivw_par *) info->par; - - if (regno > 255) - return 1; - red >>= 8; - green >>= 8; - blue >>= 8; - - /* wait for the color map FIFO to have a free entry */ - while (par->cmap_fifo == 0) - par->cmap_fifo = par->regs->cm_fifo; - - par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8); - par->cmap_fifo--; /* assume FIFO is filling up */ - return 0; -} - -static int sgivwfb_mmap(struct fb_info *info, - struct vm_area_struct *vma) -{ - int r; - - pgprot_val(vma->vm_page_prot) = - pgprot_val(vma->vm_page_prot) | _PAGE_PCD; - - r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size); - - printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n", - sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); - - return r; -} - -int __init sgivwfb_setup(char *options) -{ - char *this_opt; - - if (!options || !*options) - return 0; - - while ((this_opt = strsep(&options, ",")) != NULL) { - if (!strncmp(this_opt, "monitor:", 8)) { - if (!strncmp(this_opt + 8, "crt", 3)) - flatpanel_id = -1; - else if (!strncmp(this_opt + 8, "1600sw", 6)) - flatpanel_id = FLATPANEL_SGI_1600SW; - } - } - return 0; -} - -/* - * Initialisation - */ -static int sgivwfb_probe(struct platform_device *dev) -{ - struct sgivw_par *par; - struct fb_info *info; - char *monitor; - - info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev); - if (!info) - return -ENOMEM; - par = info->par; - - if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) { - printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n"); - framebuffer_release(info); - return -EBUSY; - } - - par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE); - if (!par->regs) { - printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n"); - goto fail_ioremap_regs; - } - - mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1); - - sgivwfb_fix.smem_start = sgivwfb_mem_phys; - sgivwfb_fix.smem_len = sgivwfb_mem_size; - sgivwfb_fix.ywrapstep = ywrap; - sgivwfb_fix.ypanstep = ypan; - - info->fix = sgivwfb_fix; - - switch (flatpanel_id) { - case FLATPANEL_SGI_1600SW: - info->var = sgivwfb_var1600sw; - monitor = "SGI 1600SW flatpanel"; - break; - default: - info->var = sgivwfb_var; - monitor = "CRT"; - } - - printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor); - - info->fbops = &sgivwfb_ops; - info->pseudo_palette = (void *) (par + 1); - info->flags = FBINFO_DEFAULT; - - info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size); - if (!info->screen_base) { - printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n"); - goto fail_ioremap_fbmem; - } - - if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) - goto fail_color_map; - - if (register_framebuffer(info) < 0) { - printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n"); - goto fail_register_framebuffer; - } - - platform_set_drvdata(dev, info); - - fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n", - sgivwfb_mem_size >> 10, sgivwfb_mem_phys); - return 0; - -fail_register_framebuffer: - fb_dealloc_cmap(&info->cmap); -fail_color_map: - iounmap((char *) info->screen_base); -fail_ioremap_fbmem: - iounmap(par->regs); -fail_ioremap_regs: - release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE); - framebuffer_release(info); - return -ENXIO; -} - -static int sgivwfb_remove(struct platform_device *dev) -{ - struct fb_info *info = platform_get_drvdata(dev); - - if (info) { - struct sgivw_par *par = info->par; - - unregister_framebuffer(info); - dbe_TurnOffDma(par); - iounmap(par->regs); - iounmap(info->screen_base); - release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE); - fb_dealloc_cmap(&info->cmap); - framebuffer_release(info); - } - return 0; -} - -static struct platform_driver sgivwfb_driver = { - .probe = sgivwfb_probe, - .remove = sgivwfb_remove, - .driver = { - .name = "sgivwfb", - }, -}; - -static struct platform_device *sgivwfb_device; - -int __init sgivwfb_init(void) -{ - int ret; - -#ifndef MODULE - char *option = NULL; - - if (fb_get_options("sgivwfb", &option)) - return -ENODEV; - sgivwfb_setup(option); -#endif - ret = platform_driver_register(&sgivwfb_driver); - if (!ret) { - sgivwfb_device = platform_device_alloc("sgivwfb", 0); - if (sgivwfb_device) { - ret = platform_device_add(sgivwfb_device); - } else - ret = -ENOMEM; - if (ret) { - platform_driver_unregister(&sgivwfb_driver); - platform_device_put(sgivwfb_device); - } - } - return ret; -} - -module_init(sgivwfb_init); - -#ifdef MODULE -MODULE_LICENSE("GPL"); - -static void __exit sgivwfb_exit(void) -{ - platform_device_unregister(sgivwfb_device); - platform_driver_unregister(&sgivwfb_driver); -} - -module_exit(sgivwfb_exit); - -#endif /* MODULE */ |