diff options
Diffstat (limited to 'drivers')
26 files changed, 147 insertions, 67 deletions
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c index d724a18b5285..37e5790681ad 100644 --- a/drivers/net/bnx2x/bnx2x_cmn.c +++ b/drivers/net/bnx2x/bnx2x_cmn.c @@ -63,8 +63,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index) fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0); #ifdef BCM_CNIC - /* We don't want TPA on FCoE, FWD and OOO L2 rings */ - bnx2x_fcoe(bp, disable_tpa) = 1; + /* We don't want TPA on an FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + fp->disable_tpa = 1; #endif } @@ -1404,10 +1405,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) { struct bnx2x *bp = netdev_priv(dev); + #ifdef BCM_CNIC - if (NO_FCOE(bp)) - return skb_tx_hash(dev, skb); - else { + if (!NO_FCOE(bp)) { struct ethhdr *hdr = (struct ethhdr *)skb->data; u16 ether_type = ntohs(hdr->h_proto); @@ -1424,8 +1424,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) return bnx2x_fcoe_tx(bp, txq_index); } #endif - /* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring - */ + /* select a non-FCoE queue */ return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp)); } @@ -1448,6 +1447,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp) bp->num_queues += NON_ETH_CONTEXT_USE; } +/** + * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues + * + * @bp: Driver handle + * + * We currently support for at most 16 Tx queues for each CoS thus we will + * allocate a multiple of 16 for ETH L2 rings according to the value of the + * bp->max_cos. + * + * If there is an FCoE L2 queue the appropriate Tx queue will have the next + * index after all ETH L2 indices. + * + * If the actual number of Tx queues (for each CoS) is less than 16 then there + * will be the holes at the end of each group of 16 ETh L2 indices (0..15, + * 16..31,...) with indicies that are not coupled with any real Tx queue. + * + * The proper configuration of skb->queue_mapping is handled by + * bnx2x_select_queue() and __skb_tx_hash(). + * + * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash() + * will return a proper Tx index if TC is enabled (netdev->num_tc > 0). + */ static inline int bnx2x_set_real_num_queues(struct bnx2x *bp) { int rc, tx, rx; diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c index a4ea35f6a456..a1e004a82f7a 100644 --- a/drivers/net/bnx2x/bnx2x_dcb.c +++ b/drivers/net/bnx2x/bnx2x_dcb.c @@ -920,7 +920,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp, void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled) { - if (!CHIP_IS_E1x(bp)) { + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) { bp->dcb_state = dcb_on; bp->dcbx_enabled = dcbx_enabled; } else { diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 150709111548..f74582a22c68 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -5798,6 +5798,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp)); + /* + * take the UNDI lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); @@ -5808,6 +5814,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) } REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); if (!CHIP_IS_E1x(bp)) { @@ -10251,10 +10259,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0); + /* Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); /* * Enable internal target-read (in case we are probed after PF FLR). diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 27b5ecb11830..40266c14e6dc 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -3007,11 +3007,27 @@ /* [R 6] Debug only: Number of used entries in the data FIFO */ #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c /* [R 7] Debug only: Number of used entries in the header FIFO */ -#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 -#define PXP2_REG_PGL_ADDR_88_F0 0x120534 -#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 -#define PXP2_REG_PGL_ADDR_90_F0 0x12053c -#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_ADDR_88_F0 0x120534 +/* [R 32] GRC address for configuration access to PCIE config address 0x88. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_88_F1 0x120544 +#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 +/* [R 32] GRC address for configuration access to PCIE config address 0x8c. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_8C_F1 0x120548 +#define PXP2_REG_PGL_ADDR_90_F0 0x12053c +/* [R 32] GRC address for configuration access to PCIE config address 0x90. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_90_F1 0x12054c +#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +/* [R 32] GRC address for configuration access to PCIE config address 0x94. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_94_F1 0x120550 #define PXP2_REG_PGL_CONTROL0 0x120490 #define PXP2_REG_PGL_CONTROL1 0x120514 #define PXP2_REG_PGL_DEBUG 0x120520 diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index f523f1cc5142..4b70b7e8bdeb 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -197,7 +197,7 @@ static void slc_bump(struct slcan *sl) skb->ip_summed = CHECKSUM_UNNECESSARY; memcpy(skb_put(skb, sizeof(struct can_frame)), &cf, sizeof(struct can_frame)); - netif_rx(skb); + netif_rx_ni(skb); sl->dev->stats.rx_packets++; sl->dev->stats.rx_bytes += cf.can_dlc; diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 480f2592f8a5..536b3a55c45f 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -2085,7 +2085,8 @@ struct e1000_info e1000_82574_info = { | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD, .flags2 = FLAG2_CHECK_PHY_HANG - | FLAG2_DISABLE_ASPM_L0S, + | FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, @@ -2104,7 +2105,8 @@ struct e1000_info e1000_82583_info = { | FLAG_HAS_AMT | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_CTRLEXT_ON_LOAD, - .flags2 = FLAG2_DISABLE_ASPM_L0S, + .flags2 = FLAG2_DISABLE_ASPM_L0S + | FLAG2_NO_DISABLE_RX, .pba = 32, .max_hw_frame_size = DEFAULT_JUMBO, .get_variants = e1000_get_variants_82571, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 638d175792cf..35916f485028 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -453,6 +453,7 @@ struct e1000_info { #define FLAG2_DISABLE_ASPM_L0S (1 << 7) #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) +#define FLAG2_NO_DISABLE_RX (1 << 10) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 06d88f316dce..6a0526a59a8a 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1206,7 +1206,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF)); ew32(RDBAH, ((u64) rx_ring->dma >> 32)); ew32(RDLEN, rx_ring->size); diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 7898a67d6505..0893ab107adf 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -190,7 +190,8 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */ if (!((nvm_data & NVM_COMPAT_LOM) || (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) || - (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD))) + (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) || + (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES))) goto out; ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, @@ -200,10 +201,10 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) goto out; } - if (nvm_alt_mac_addr_offset == 0xFFFF) { + if ((nvm_alt_mac_addr_offset == 0xFFFF) || + (nvm_alt_mac_addr_offset == 0x0000)) /* There is no Alternate MAC Address */ goto out; - } if (hw->bus.func == E1000_FUNC_1) nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index ab4be80f7ab5..362f70382cdd 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -56,7 +56,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION +#define DRV_VERSION "1.4.4" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -2915,7 +2915,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* disable receives while setting up the descriptors */ rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); e1e_flush(); usleep_range(10000, 20000); @@ -3394,7 +3395,8 @@ void e1000e_down(struct e1000_adapter *adapter) /* disable receives in the hardware */ rctl = er32(RCTL); - ew32(RCTL, rctl & ~E1000_RCTL_EN); + if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) + ew32(RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ netif_stop_queue(netdev); @@ -3403,6 +3405,7 @@ void e1000e_down(struct e1000_adapter *adapter) tctl = er32(TCTL); tctl &= ~E1000_TCTL_EN; ew32(TCTL, tctl); + /* flush both disables and wait for them to finish */ e1e_flush(); usleep_range(10000, 20000); diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/gianfar_ptp.c index 1c97861596f0..f67b8aebc89c 100644 --- a/drivers/net/gianfar_ptp.c +++ b/drivers/net/gianfar_ptp.c @@ -193,14 +193,9 @@ static void set_alarm(struct etsects *etsects) /* Caller must hold etsects->lock. */ static void set_fipers(struct etsects *etsects) { - u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl); - - gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE)); - gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc); + set_alarm(etsects); gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); - set_alarm(etsects); - gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE); } /* @@ -511,7 +506,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1); gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2); set_alarm(etsects); - gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE); + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE|FRD); spin_unlock_irqrestore(&etsects->lock, flags); diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c index 4488bd581eca..82660672dcd9 100644 --- a/drivers/net/irda/sh_irda.c +++ b/drivers/net/irda/sh_irda.c @@ -22,6 +22,8 @@ * - DMA transfer support * - FIFO mode support */ +#include <linux/io.h> +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/clk.h> diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 52a7c86af663..ed7d7d62bf68 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#include <linux/io.h> +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -511,7 +513,7 @@ static void sh_sir_tx(struct sh_sir_self *self, int phase) static int sh_sir_read_data(struct sh_sir_self *self) { - u16 val; + u16 val = 0; int timeout = 1024; while (timeout--) { diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 8b3090dc4bcd..80b6f36a8074 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -82,7 +82,7 @@ static int cards_found; /* * VLB I/O addresses */ -static unsigned int pcnet32_portlist[] __initdata = +static unsigned int pcnet32_portlist[] = { 0x300, 0x320, 0x340, 0x360, 0 }; static int pcnet32_debug; diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 2cd8dc5847b4..cb6e0b486b1e 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -34,8 +34,7 @@ #define PAGESEL 0x13 #define LAYER4 0x02 #define LAYER2 0x01 -#define MAX_RXTS 4 -#define MAX_TXTS 4 +#define MAX_RXTS 64 #define N_EXT_TS 1 #define PSF_PTPVER 2 #define PSF_EVNT 0x4000 @@ -218,7 +217,7 @@ static void phy2rxts(struct phy_rxts *p, struct rxts *rxts) rxts->seqid = p->seqid; rxts->msgtype = (p->msgtype >> 12) & 0xf; rxts->hash = p->msgtype & 0x0fff; - rxts->tmo = jiffies + HZ; + rxts->tmo = jiffies + 2; } static u64 phy2txts(struct phy_txts *p) diff --git a/drivers/net/slip.c b/drivers/net/slip.c index f11b3f3df24f..4c617534f937 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -367,7 +367,7 @@ static void sl_bump(struct slip *sl) memcpy(skb_put(skb, count), sl->rbuff, count); skb_reset_mac_header(skb); skb->protocol = htons(ETH_P_IP); - netif_rx(skb); + netif_rx_ni(skb); dev->stats.rx_packets++; } diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 041fb7d43c4f..ef3b236b5145 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -977,7 +977,6 @@ static void rtl8150_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (dev) { set_bit(RTL8150_UNPLUG, &dev->flags); - tasklet_disable(&dev->tl); tasklet_kill(&dev->tl); unregister_netdev(dev->netdev); unlink_all_urbs(dev); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index f54dff44ed50..c3119a6caace 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1735,6 +1735,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) if (dma_mapping_error(ah->dev, bf->skbaddr)) { ATH5K_ERR(ah, "beacon DMA mapping failed\n"); + dev_kfree_skb_any(skb); + bf->skb = NULL; return -EIO; } @@ -1819,8 +1821,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) ath5k_txbuf_free_skb(ah, avf->bbuf); avf->bbuf->skb = skb; ret = ath5k_beacon_setup(ah, avf->bbuf); - if (ret) - avf->bbuf->skb = NULL; out: return ret; } @@ -1840,6 +1840,7 @@ ath5k_beacon_send(struct ath5k_hw *ah) struct ath5k_vif *avf; struct ath5k_buf *bf; struct sk_buff *skb; + int err; ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n"); @@ -1888,11 +1889,6 @@ ath5k_beacon_send(struct ath5k_hw *ah) avf = (void *)vif->drv_priv; bf = avf->bbuf; - if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || - ah->opmode == NL80211_IFTYPE_MONITOR)) { - ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); - return; - } /* * Stop any current dma and put the new frame on the queue. @@ -1906,8 +1902,17 @@ ath5k_beacon_send(struct ath5k_hw *ah) /* refresh the beacon for AP or MESH mode */ if (ah->opmode == NL80211_IFTYPE_AP || - ah->opmode == NL80211_IFTYPE_MESH_POINT) - ath5k_beacon_update(ah->hw, vif); + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + err = ath5k_beacon_update(ah->hw, vif); + if (err) + return; + } + + if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || + ah->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb); + return; + } trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index d109c25417f4..c34bef1bf2b0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -3734,7 +3734,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah) } } else { reg_pmu_set = (5 << 1) | (7 << 4) | - (1 << 8) | (2 << 14) | + (2 << 8) | (2 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | (1 << 28); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 6de3f0bc18e6..5c590429f120 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -850,7 +850,7 @@ #define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220) #define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + 0x240) #define AR_PHY_TX_IQCAL_STATUS_B1 (AR_SM1_BASE + 0x48c) -#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM_BASE + 0x450 + ((_i) << 2)) +#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM1_BASE + 0x450 + ((_i) << 2)) /* * Channel 2 Register Map diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 83cba22ac6e8..481e534534eb 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,9 +795,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev) u32 tmp; u16 mmio_base; - tmp = b43_read32(dev, SSB_TMSHIGH); - if (tmp & SSB_TMSHIGH_DMA64) - return DMA_BIT_MASK(64); + switch (dev->dev->bus_type) { +#ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: + tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST); + if (tmp & BCMA_IOST_DMA64) + return DMA_BIT_MASK(64); + break; +#endif +#ifdef CONFIG_B43_SSB + case B43_BUS_SSB: + tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); + if (tmp & SSB_TMSHIGH_DMA64) + return DMA_BIT_MASK(64); + break; +#endif + } + mmio_base = b43_dmacontroller_base(0, 0); b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK); tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 507559361d87..939563162fb3 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c16) }, /* Draytek */ { USB_DEVICE(0x07fa, 0x7712) }, + /* DVICO */ + { USB_DEVICE(0x0fe9, 0xb307) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7711) }, { USB_DEVICE(0x7392, 0x7717) }, diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 6a93939f44e8..0baeb894f093 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00d8) }, { USB_DEVICE(0x0411, 0x00d9) }, + { USB_DEVICE(0x0411, 0x00e6) }, { USB_DEVICE(0x0411, 0x00f4) }, { USB_DEVICE(0x0411, 0x0116) }, { USB_DEVICE(0x0411, 0x0119) }, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 942f7a3969a7..ef63c0df006a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)}, /* 8188CE-VAU USB minCard (b/g mode only) */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)}, + /* 8188RU in Alfa AWUS036NHR */ + {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)}, /* 8188 Combo for BC4 */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)}, @@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ /* HP - Lite-On ,8188CUS Slim Combo */ {RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */ {RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/ {RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/ {RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/ {RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/ {RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/ - {RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ + {RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/ /* Russian customer -Azwave (8188CE-VAU b/g mode only) */ - {RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */ + {RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */ + {RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */ /****** 8192CU ********/ {RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/ {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/ - {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/ {RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/ {RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ {RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/ diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/wl1251/acx.c index ef8370edace7..ad87a1ac6462 100644 --- a/drivers/net/wireless/wl1251/acx.c +++ b/drivers/net/wireless/wl1251/acx.c @@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl) ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1251_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c index 81f164bc4888..d14d69d733a0 100644 --- a/drivers/net/wireless/wl1251/cmd.c +++ b/drivers/net/wireless/wl1251/cmd.c @@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable) if (ret < 0) { wl1251_error("tx %s cmd for channel %d failed", enable ? "start" : "stop", channel); - return ret; + goto out; } wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", |