diff options
Diffstat (limited to 'drivers')
31 files changed, 3324 insertions, 837 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 2281b5098e95..36e0675be9f7 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -121,6 +121,7 @@ config MD_RAID10 config MD_RAID456 tristate "RAID-4/RAID-5/RAID-6 mode" depends on BLK_DEV_MD + select MD_RAID6_PQ select ASYNC_MEMCPY select ASYNC_XOR ---help--- @@ -151,34 +152,8 @@ config MD_RAID456 If unsure, say Y. -config MD_RAID5_RESHAPE - bool "Support adding drives to a raid-5 array" - depends on MD_RAID456 - default y - ---help--- - A RAID-5 set can be expanded by adding extra drives. This - requires "restriping" the array which means (almost) every - block must be written to a different place. - - This option allows such restriping to be done while the array - is online. - - You will need mdadm version 2.4.1 or later to use this - feature safely. During the early stage of reshape there is - a critical section where live data is being over-written. A - crash during this time needs extra care for recovery. The - newer mdadm takes a copy of the data in the critical section - and will restore it, if necessary, after a crash. - - The mdadm usage is e.g. - mdadm --grow /dev/md1 --raid-disks=6 - to grow '/dev/md1' to having 6 disks. - - Note: The array can only be expanded, not contracted. - There should be enough spares already present to make the new - array workable. - - If unsure, say Y. +config MD_RAID6_PQ + tristate config MD_MULTIPATH tristate "Multipath I/O support" diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 72880b7e28d9..45cc5951d928 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -2,20 +2,21 @@ # Makefile for the kernel software RAID and LVM drivers. # -dm-mod-objs := dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \ +dm-mod-y += dm.o dm-table.o dm-target.o dm-linear.o dm-stripe.o \ dm-ioctl.o dm-io.o dm-kcopyd.o dm-sysfs.o -dm-multipath-objs := dm-path-selector.o dm-mpath.o -dm-snapshot-objs := dm-snap.o dm-exception-store.o dm-snap-transient.o \ +dm-multipath-y += dm-path-selector.o dm-mpath.o +dm-snapshot-y += dm-snap.o dm-exception-store.o dm-snap-transient.o \ dm-snap-persistent.o -dm-mirror-objs := dm-raid1.o -md-mod-objs := md.o bitmap.o -raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \ +dm-mirror-y += dm-raid1.o +md-mod-y += md.o bitmap.o +raid456-y += raid5.o +raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \ raid6int1.o raid6int2.o raid6int4.o \ raid6int8.o raid6int16.o raid6int32.o \ raid6altivec1.o raid6altivec2.o raid6altivec4.o \ raid6altivec8.o \ raid6mmx.o raid6sse1.o raid6sse2.o -hostprogs-y := mktables +hostprogs-y += mktables # Note: link order is important. All raid personalities # and must come before md.o, as they each initialise @@ -26,6 +27,7 @@ obj-$(CONFIG_MD_LINEAR) += linear.o obj-$(CONFIG_MD_RAID0) += raid0.o obj-$(CONFIG_MD_RAID1) += raid1.o obj-$(CONFIG_MD_RAID10) += raid10.o +obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o obj-$(CONFIG_MD_RAID456) += raid456.o obj-$(CONFIG_MD_MULTIPATH) += multipath.o obj-$(CONFIG_MD_FAULTY) += faulty.o diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 719943763391..f8a9f7ab2cb8 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -16,6 +16,7 @@ * wait if count gets too high, wake when it drops to half. */ +#include <linux/blkdev.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/slab.h> @@ -26,8 +27,8 @@ #include <linux/file.h> #include <linux/mount.h> #include <linux/buffer_head.h> -#include <linux/raid/md.h> -#include <linux/raid/bitmap.h> +#include "md.h" +#include "bitmap.h" /* debug macros */ @@ -111,9 +112,10 @@ static int bitmap_checkpage(struct bitmap *bitmap, unsigned long page, int creat unsigned char *mappage; if (page >= bitmap->pages) { - printk(KERN_ALERT - "%s: invalid bitmap page request: %lu (> %lu)\n", - bmname(bitmap), page, bitmap->pages-1); + /* This can happen if bitmap_start_sync goes beyond + * End-of-device while looking for a whole page. + * It is harmless. + */ return -EINVAL; } @@ -265,7 +267,6 @@ static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev) list_for_each_continue_rcu(pos, &mddev->disks) { rdev = list_entry(pos, mdk_rdev_t, same_set); if (rdev->raid_disk >= 0 && - test_bit(In_sync, &rdev->flags) && !test_bit(Faulty, &rdev->flags)) { /* this is a usable devices */ atomic_inc(&rdev->nr_pending); @@ -297,7 +298,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) + size/512 > 0) /* bitmap runs in to metadata */ goto bad_alignment; - if (rdev->data_offset + mddev->size*2 + if (rdev->data_offset + mddev->dev_sectors > rdev->sb_start + bitmap->offset) /* data runs in to bitmap */ goto bad_alignment; @@ -570,7 +571,7 @@ static int bitmap_read_sb(struct bitmap *bitmap) else if (le32_to_cpu(sb->version) < BITMAP_MAJOR_LO || le32_to_cpu(sb->version) > BITMAP_MAJOR_HI) reason = "unrecognized superblock version"; - else if (chunksize < PAGE_SIZE) + else if (chunksize < 512) reason = "bitmap chunksize too small"; else if ((1 << ffz(~chunksize)) != chunksize) reason = "bitmap chunksize not a power of 2"; @@ -1306,6 +1307,9 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto PRINTK(KERN_DEBUG "dec write-behind count %d/%d\n", atomic_read(&bitmap->behind_writes), bitmap->max_write_behind); } + if (bitmap->mddev->degraded) + /* Never clear bits or update events_cleared when degraded */ + success = 0; while (sectors) { int blocks; @@ -1345,8 +1349,8 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto } } -int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, - int degraded) +static int __bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, + int degraded) { bitmap_counter_t *bmc; int rv; @@ -1374,6 +1378,29 @@ int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, return rv; } +int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, + int degraded) +{ + /* bitmap_start_sync must always report on multiples of whole + * pages, otherwise resync (which is very PAGE_SIZE based) will + * get confused. + * So call __bitmap_start_sync repeatedly (if needed) until + * At least PAGE_SIZE>>9 blocks are covered. + * Return the 'or' of the result. + */ + int rv = 0; + int blocks1; + + *blocks = 0; + while (*blocks < (PAGE_SIZE>>9)) { + rv |= __bitmap_start_sync(bitmap, offset, + &blocks1, degraded); + offset += blocks1; + *blocks += blocks1; + } + return rv; +} + void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int aborted) { bitmap_counter_t *bmc; @@ -1443,6 +1470,8 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector) wait_event(bitmap->mddev->recovery_wait, atomic_read(&bitmap->mddev->recovery_active) == 0); + bitmap->mddev->curr_resync_completed = bitmap->mddev->curr_resync; + set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags); sector &= ~((1ULL << CHUNK_BLOCK_SHIFT(bitmap)) - 1); s = 0; while (s < sector && s < bitmap->mddev->resync_max_sectors) { diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h new file mode 100644 index 000000000000..e98900671ca9 --- /dev/null +++ b/drivers/md/bitmap.h @@ -0,0 +1,288 @@ +/* + * bitmap.h: Copyright (C) Peter T. Breuer (ptb@ot.uc3m.es) 2003 + * + * additions: Copyright (C) 2003-2004, Paul Clements, SteelEye Technology, Inc. + */ +#ifndef BITMAP_H +#define BITMAP_H 1 + +#define BITMAP_MAJOR_LO 3 +/* version 4 insists the bitmap is in little-endian order + * with version 3, it is host-endian which is non-portable + */ +#define BITMAP_MAJOR_HI 4 +#define BITMAP_MAJOR_HOSTENDIAN 3 + +#define BITMAP_MINOR 39 + +/* + * in-memory bitmap: + * + * Use 16 bit block counters to track pending writes to each "chunk". + * The 2 high order bits are special-purpose, the first is a flag indicating + * whether a resync is needed. The second is a flag indicating whether a + * resync is active. + * This means that the counter is actually 14 bits: + * + * +--------+--------+------------------------------------------------+ + * | resync | resync | counter | + * | needed | active | | + * | (0-1) | (0-1) | (0-16383) | + * +--------+--------+------------------------------------------------+ + * + * The "resync needed" bit is set when: + * a '1' bit is read from storage at startup. + * a write request fails on some drives + * a resync is aborted on a chunk with 'resync active' set + * It is cleared (and resync-active set) when a resync starts across all drives + * of the chunk. + * + * + * The "resync active" bit is set when: + * a resync is started on all drives, and resync_needed is set. + * resync_needed will be cleared (as long as resync_active wasn't already set). + * It is cleared when a resync completes. + * + * The counter counts pending write requests, plus the on-disk bit. + * When the counter is '1' and the resync bits are clear, the on-disk + * bit can be cleared aswell, thus setting the counter to 0. + * When we set a bit, or in the counter (to start a write), if the fields is + * 0, we first set the disk bit and set the counter to 1. + * + * If the counter is 0, the on-disk bit is clear and the stipe is clean + * Anything that dirties the stipe pushes the counter to 2 (at least) + * and sets the on-disk bit (lazily). + * If a periodic sweep find the counter at 2, it is decremented to 1. + * If the sweep find the counter at 1, the on-disk bit is cleared and the + * counter goes to zero. + * + * Also, we'll hijack the "map" pointer itself and use it as two 16 bit block + * counters as a fallback when "page" memory cannot be allocated: + * + * Normal case (page memory allocated): + * + * page pointer (32-bit) + * + * [ ] ------+ + * | + * +-------> [ ][ ]..[ ] (4096 byte page == 2048 counters) + * c1 c2 c2048 + * + * Hijacked case (page memory allocation failed): + * + * hijacked page pointer (32-bit) + * + * [ ][ ] (no page memory allocated) + * counter #1 (16-bit) counter #2 (16-bit) + * + */ + +#ifdef __KERNEL__ + +#define PAGE_BITS (PAGE_SIZE << 3) +#define PAGE_BIT_SHIFT (PAGE_SHIFT + 3) + +typedef __u16 bitmap_counter_t; +#define COUNTER_BITS 16 +#define COUNTER_BIT_SHIFT 4 +#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8) +#define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3) + +#define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1))) +#define RESYNC_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 2))) +#define COUNTER_MAX ((bitmap_counter_t) RESYNC_MASK - 1) +#define NEEDED(x) (((bitmap_counter_t) x) & NEEDED_MASK) +#define RESYNC(x) (((bitmap_counter_t) x) & RESYNC_MASK) +#define COUNTER(x) (((bitmap_counter_t) x) & COUNTER_MAX) + +/* how many counters per page? */ +#define PAGE_COUNTER_RATIO (PAGE_BITS / COUNTER_BITS) +/* same, except a shift value for more efficient bitops */ +#define PAGE_COUNTER_SHIFT (PAGE_BIT_SHIFT - COUNTER_BIT_SHIFT) +/* same, except a mask value for more efficient bitops */ +#define PAGE_COUNTER_MASK (PAGE_COUNTER_RATIO - 1) + +#define BITMAP_BLOCK_SIZE 512 +#define BITMAP_BLOCK_SHIFT 9 + +/* how many blocks per chunk? (this is variable) */ +#define CHUNK_BLOCK_RATIO(bitmap) ((bitmap)->chunksize >> BITMAP_BLOCK_SHIFT) +#define CHUNK_BLOCK_SHIFT(bitmap) ((bitmap)->chunkshift - BITMAP_BLOCK_SHIFT) +#define CHUNK_BLOCK_MASK(bitmap) (CHUNK_BLOCK_RATIO(bitmap) - 1) + +/* when hijacked, the counters and bits represent even larger "chunks" */ +/* there will be 1024 chunks represented by each counter in the page pointers */ +#define PAGEPTR_BLOCK_RATIO(bitmap) \ + (CHUNK_BLOCK_RATIO(bitmap) << PAGE_COUNTER_SHIFT >> 1) +#define PAGEPTR_BLOCK_SHIFT(bitmap) \ + (CHUNK_BLOCK_SHIFT(bitmap) + PAGE_COUNTER_SHIFT - 1) +#define PAGEPTR_BLOCK_MASK(bitmap) (PAGEPTR_BLOCK_RATIO(bitmap) - 1) + +/* + * on-disk bitmap: + * + * Use one bit per "chunk" (block set). We do the disk I/O on the bitmap + * file a page at a time. There's a superblock at the start of the file. + */ + +/* map chunks (bits) to file pages - offset by the size of the superblock */ +#define CHUNK_BIT_OFFSET(chunk) ((chunk) + (sizeof(bitmap_super_t) << 3)) + +#endif + +/* + * bitmap structures: + */ + +#define BITMAP_MAGIC 0x6d746962 + +/* use these for bitmap->flags and bitmap->sb->state bit-fields */ +enum bitmap_state { + BITMAP_STALE = 0x002, /* the bitmap file is out of date or had -EIO */ + BITMAP_WRITE_ERROR = 0x004, /* A write error has occurred */ + BITMAP_HOSTENDIAN = 0x8000, +}; + +/* the superblock at the front of the bitmap file -- little endian */ +typedef struct bitmap_super_s { + __le32 magic; /* 0 BITMAP_MAGIC */ + __le32 version; /* 4 the bitmap major for now, could change... */ + __u8 uuid[16]; /* 8 128 bit uuid - must match md device uuid */ + __le64 events; /* 24 event counter for the bitmap (1)*/ + __le64 events_cleared;/*32 event counter when last bit cleared (2) */ + __le64 sync_size; /* 40 the size of the md device's sync range(3) */ + __le32 state; /* 48 bitmap state information */ + __le32 chunksize; /* 52 the bitmap chunk size in bytes */ + __le32 daemon_sleep; /* 56 seconds between disk flushes */ + __le32 write_behind; /* 60 number of outstanding write-behind writes */ + + __u8 pad[256 - 64]; /* set to zero */ +} bitmap_super_t; + +/* notes: + * (1) This event counter is updated before the eventcounter in the md superblock + * When a bitmap is loaded, it is only accepted if this event counter is equal + * to, or one greater than, the event counter in the superblock. + * (2) This event counter is updated when the other one is *if*and*only*if* the + * array is not degraded. As bits are not cleared when the array is degraded, + * this represents the last time that any bits were cleared. + * If a device is being added that has an event count with this value or + * higher, it is accepted as conforming to the bitmap. + * (3)This is the number of sectors represented by the bitmap, and is the range that + * resync happens across. For raid1 and raid5/6 it is the size of individual + * devices. For raid10 it is the size of the array. + */ + +#ifdef __KERNEL__ + +/* the in-memory bitmap is represented by bitmap_pages */ +struct bitmap_page { + /* + * map points to the actual memory page + */ + char *map; + /* + * in emergencies (when map cannot be alloced), hijack the map + * pointer and use it as two counters itself + */ + unsigned int hijacked:1; + /* + * count of dirty bits on the page + */ + unsigned int count:31; +}; + +/* keep track of bitmap file pages that have pending writes on them */ +struct page_list { + struct list_head list; + struct page *page; +}; + +/* the main bitmap structure - one per mddev */ +struct bitmap { + struct bitmap_page *bp; + unsigned long pages; /* total number of pages in the bitmap */ + unsigned long missing_pages; /* number of pages not yet allocated */ + + mddev_t *mddev; /* the md device that the bitmap is for */ + + int counter_bits; /* how many bits per block counter */ + + /* bitmap chunksize -- how much data does each bit represent? */ + unsigned long chunksize; + unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */ + unsigned long chunks; /* total number of data chunks for the array */ + + /* We hold a count on the chunk currently being synced, and drop + * it when the last block is started. If the resync is aborted + * midway, we need to be able to drop that count, so we remember + * the counted chunk.. + */ + unsigned long syncchunk; + + __u64 events_cleared; + int need_sync; + + /* bitmap spinlock */ + spinlock_t lock; + + long offset; /* offset from superblock if file is NULL */ + struct file *file; /* backing disk file */ + struct page *sb_page; /* cached copy of the bitmap file superblock */ + struct page **filemap; /* list of cache pages for the file */ + unsigned long *filemap_attr; /* attributes associated w/ filemap pages */ + unsigned long file_pages; /* number of pages in the file */ + int last_page_size; /* bytes in the last page */ + + unsigned long flags; + + int allclean; + + unsigned long max_write_behind; /* write-behind mode */ + atomic_t behind_writes; + + /* + * the bitmap daemon - periodically wakes up and sweeps the bitmap + * file, cleaning up bits and flushing out pages to disk as necessary + */ + unsigned long daemon_lastrun; /* jiffies of last run */ + unsigned long daemon_sleep; /* how many seconds between updates? */ + unsigned long last_end_sync; /* when we lasted called end_sync to + * update bitmap with resync progress */ + + atomic_t pending_writes; /* pending writes to the bitmap file */ + wait_queue_head_t write_wait; + wait_queue_head_t overflow_wait; + +}; + +/* the bitmap API */ + +/* these are used only by md/bitmap */ +int bitmap_create(mddev_t *mddev); +void bitmap_flush(mddev_t *mddev); +void bitmap_destroy(mddev_t *mddev); + +void bitmap_print_sb(struct bitmap *bitmap); +void bitmap_update_sb(struct bitmap *bitmap); + +int bitmap_setallbits(struct bitmap *bitmap); +void bitmap_write_all(struct bitmap *bitmap); + +void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e); + +/* these are exported */ +int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, + unsigned long sectors, int behind); +void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, + unsigned long sectors, int success, int behind); +int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int degraded); +void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int aborted); +void bitmap_close_sync(struct bitmap *bitmap); +void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector); + +void bitmap_unplug(struct bitmap *bitmap); +void bitmap_daemon_work(struct bitmap *bitmap); +#endif + +#endif diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 86d9adf90e79..8695809b24b0 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -62,7 +62,10 @@ #define ModeShift 5 #define MaxFault 50 -#include <linux/raid/md.h> +#include <linux/blkdev.h> +#include <linux/raid/md_u.h> +#include "md.h" +#include <linux/seq_file.h> static void faulty_fail(struct bio *bio, int error) @@ -280,6 +283,17 @@ static int reconfig(mddev_t *mddev, int layout, int chunk_size) return 0; } +static sector_t faulty_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + WARN_ONCE(raid_disks, + "%s does not support generic reshape\n", __func__); + + if (sectors == 0) + return mddev->dev_sectors; + + return sectors; +} + static int run(mddev_t *mddev) { mdk_rdev_t *rdev; @@ -298,7 +312,7 @@ static int run(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) conf->rdev = rdev; - mddev->array_sectors = mddev->size * 2; + md_set_array_sectors(mddev, faulty_size(mddev, 0, 0)); mddev->private = conf; reconfig(mddev, mddev->layout, -1); @@ -325,6 +339,7 @@ static struct mdk_personality faulty_personality = .stop = stop, .status = status, .reconfig = reconfig, + .size = faulty_size, }; static int __init raid_init(void) diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 09658b218474..7a36e38393a1 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -16,7 +16,11 @@ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/raid/linear.h> +#include <linux/blkdev.h> +#include <linux/raid/md_u.h> +#include <linux/seq_file.h> +#include "md.h" +#include "linear.h" /* * find which device holds a particular offset @@ -97,6 +101,16 @@ static int linear_congested(void *data, int bits) return ret; } +static sector_t linear_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + linear_conf_t *conf = mddev_to_conf(mddev); + + WARN_ONCE(sectors || raid_disks, + "%s does not support generic reshape\n", __func__); + + return conf->array_sectors; +} + static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) { linear_conf_t *conf; @@ -135,8 +149,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) mddev->queue->max_sectors > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); - disk->num_sectors = rdev->size * 2; - conf->array_sectors += rdev->size * 2; + disk->num_sectors = rdev->sectors; + conf->array_sectors += rdev->sectors; cnt++; } @@ -249,7 +263,7 @@ static int linear_run (mddev_t *mddev) if (!conf) return 1; mddev->private = conf; - mddev->array_sectors = conf->array_sectors; + md_set_array_sectors(mddev, linear_size(mddev, 0, 0)); blk_queue_merge_bvec(mddev->queue, linear_mergeable_bvec); mddev->queue->unplug_fn = linear_unplug; @@ -283,7 +297,7 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev) newconf->prev = mddev_to_conf(mddev); mddev->private = newconf; mddev->raid_disks++; - mddev->array_sectors = newconf->array_sectors; + md_set_array_sectors(mddev, linear_size(mddev, 0, 0)); set_capacity(mddev->gendisk, mddev->array_sectors); return 0; } @@ -381,6 +395,7 @@ static struct mdk_personality linear_personality = .stop = linear_stop, .status = linear_status, .hot_add_disk = linear_add, + .size = linear_size, }; static int __init linear_init (void) diff --git a/drivers/md/linear.h b/drivers/md/linear.h new file mode 100644 index 000000000000..bf8179587f95 --- /dev/null +++ b/drivers/md/linear.h @@ -0,0 +1,29 @@ +#ifndef _LINEAR_H +#define _LINEAR_H + +struct dev_info { + mdk_rdev_t *rdev; + sector_t num_sectors; + sector_t start_sector; +}; + +typedef struct dev_info dev_info_t; + +struct linear_private_data +{ + struct linear_private_data *prev; /* earlier version */ + dev_info_t **hash_table; + sector_t spacing; + sector_t array_sectors; + int sector_shift; /* shift before dividing + * by spacing + */ + dev_info_t disks[0]; +}; + + +typedef struct linear_private_data linear_conf_t; + +#define mddev_to_conf(mddev) ((linear_conf_t *) mddev->private) + +#endif diff --git a/drivers/md/md.c b/drivers/md/md.c index a307f87eb90e..ed5727c089a9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -33,9 +33,9 @@ */ #include <linux/kthread.h> -#include <linux/raid/md.h> -#include <linux/raid/bitmap.h> +#include <linux/blkdev.h> #include <linux/sysctl.h> +#include <linux/seq_file.h> #include <linux/buffer_head.h> /* for invalidate_bdev */ #include <linux/poll.h> #include <linux/ctype.h> @@ -45,11 +45,10 @@ #include <linux/reboot.h> #include <linux/file.h> #include <linux/delay.h> - -#define MAJOR_NR MD_MAJOR - -/* 63 partitions with the alternate major number (mdp) */ -#define MdpMinorShift 6 +#include <linux/raid/md_p.h> +#include <linux/raid/md_u.h> +#include "md.h" +#include "bitmap.h" #define DEBUG 0 #define dprintk(x...) ((void)(DEBUG && printk(x))) @@ -202,12 +201,68 @@ static DEFINE_SPINLOCK(all_mddevs_lock); ) -static int md_fail_request(struct request_queue *q, struct bio *bio) +/* Rather than calling directly into the personality make_request function, + * IO requests come here first so that we can check if the device is + * being suspended pending a reconfiguration. + * We hold a refcount over the call to ->make_request. By the time that + * call has finished, the bio has been linked into some internal structure + * and so is visible to ->quiesce(), so we don't need the refcount any more. + */ +static int md_make_request(struct request_queue *q, struct bio *bio) { - bio_io_error(bio); - return 0; + mddev_t *mddev = q->queuedata; + int rv; + if (mddev == NULL || mddev->pers == NULL) { + bio_io_error(bio); + return 0; + } + rcu_read_lock(); + if (mddev->suspended) { + DEFINE_WAIT(__wait); + for (;;) { + prepare_to_wait(&mddev->sb_wait, &__wait, + TASK_UNINTERRUPTIBLE); + if (!mddev->suspended) + break; + rcu_read_unlock(); + schedule(); + rcu_read_lock(); + } + finish_wait(&mddev->sb_wait, &__wait); + } + atomic_inc(&mddev->active_io); + rcu_read_unlock(); + rv = mddev->pers->make_request(q, bio); + if (atomic_dec_and_test(&mddev->active_io) && mddev->suspended) + wake_up(&mddev->sb_wait); + + return rv; +} + +static void mddev_suspend(mddev_t *mddev) +{ + BUG_ON(mddev->suspended); + mddev->suspended = 1; + synchronize_rcu(); + wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0); + mddev->pers->quiesce(mddev, 1); + md_unregister_thread(mddev->thread); + mddev->thread = NULL; + /* we now know that no code is executing in the personality module, + * except possibly the tail end of a ->bi_end_io function, but that + * is certain to complete before the module has a chance to get + * unloaded + */ +} + +static void mddev_resume(mddev_t *mddev) +{ + mddev->suspended = 0; + wake_up(&mddev->sb_wait); + mddev->pers->quiesce(mddev, 0); } + static inline mddev_t *mddev_get(mddev_t *mddev) { atomic_inc(&mddev->active); @@ -310,6 +365,7 @@ static mddev_t * mddev_find(dev_t unit) init_timer(&new->safemode_timer); atomic_set(&new->active, 1); atomic_set(&new->openers, 0); + atomic_set(&new->active_io, 0); spin_lock_init(&new->write_lock); init_waitqueue_head(&new->sb_wait); init_waitqueue_head(&new->recovery_wait); @@ -326,6 +382,11 @@ static inline int mddev_lock(mddev_t * mddev) return mutex_lock_interruptible(&mddev->reconfig_mutex); } +static inline int mddev_is_locked(mddev_t *mddev) +{ + return mutex_is_locked(&mddev->reconfig_mutex); +} + static inline int mddev_trylock(mddev_t * mddev) { return mutex_trylock(&mddev->reconfig_mutex); @@ -409,7 +470,7 @@ static void free_disk_sb(mdk_rdev_t * rdev) rdev->sb_loaded = 0; rdev->sb_page = NULL; rdev->sb_start = 0; - rdev->size = 0; + rdev->sectors = 0; } } @@ -775,9 +836,9 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version else ret = 0; } - rdev->size = calc_num_sectors(rdev, sb->chunk_size) / 2; + rdev->sectors = calc_num_sectors(rdev, sb->chunk_size); - if (rdev->size < sb->size && sb->level > 1) + if (rdev->sectors < sb->size * 2 && sb->level > 1) /* "this cannot possibly happen" ... */ ret = -EINVAL; @@ -812,7 +873,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) mddev->clevel[0] = 0; mddev->layout = sb->layout; mddev->raid_disks = sb->raid_disks; - mddev->size = sb->size; + mddev->dev_sectors = sb->size * 2; mddev->events = ev1; mddev->bitmap_offset = 0; mddev->default_bitmap_offset = MD_SB_BYTES >> 9; @@ -926,7 +987,7 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->ctime = mddev->ctime; sb->level = mddev->level; - sb->size = mddev->size; + sb->size = mddev->dev_sectors / 2; sb->raid_disks = mddev->raid_disks; sb->md_minor = mddev->md_minor; sb->not_persistent = 0; @@ -1024,7 +1085,7 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) static unsigned long long super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) { - if (num_sectors && num_sectors < rdev->mddev->size * 2) + if (num_sectors && num_sectors < rdev->mddev->dev_sectors) return 0; /* component must fit device */ if (rdev->mddev->bitmap_offset) return 0; /* can't move bitmap */ @@ -1180,16 +1241,17 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) ret = 0; } if (minor_version) - rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2; + rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) - + le64_to_cpu(sb->data_offset); else - rdev->size = rdev->sb_start / 2; - if (rdev->size < le64_to_cpu(sb->data_size)/2) + rdev->sectors = rdev->sb_start; + if (rdev->sectors < le64_to_cpu(sb->data_size)) return -EINVAL; - rdev->size = le64_to_cpu(sb->data_size)/2; + rdev->sectors = le64_to_cpu(sb->data_size); if (le32_to_cpu(sb->chunksize)) - rdev->size &= ~((sector_t)le32_to_cpu(sb->chunksize)/2 - 1); + rdev->sectors &= ~((sector_t)le32_to_cpu(sb->chunksize) - 1); - if (le64_to_cpu(sb->size) > rdev->size*2) + if (le64_to_cpu(sb->size) > rdev->sectors) return -EINVAL; return ret; } @@ -1216,7 +1278,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev) mddev->clevel[0] = 0; mddev->layout = le32_to_cpu(sb->layout); mddev->raid_disks = le32_to_cpu(sb->raid_disks); - mddev->size = le64_to_cpu(sb->size)/2; + mddev->dev_sectors = le64_to_cpu(sb->size); mddev->events = ev1; mddev->bitmap_offset = 0; mddev->default_bitmap_offset = 1024 >> 9; @@ -1312,7 +1374,7 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->cnt_corrected_read = cpu_to_le32(atomic_read(&rdev->corrected_errors)); sb->raid_disks = cpu_to_le32(mddev->raid_disks); - sb->size = cpu_to_le64(mddev->size<<1); + sb->size = cpu_to_le64(mddev->dev_sectors); if (mddev->bitmap && mddev->bitmap_file == NULL) { sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset); @@ -1320,10 +1382,15 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) } if (rdev->raid_disk >= 0 && - !test_bit(In_sync, &rdev->flags) && - rdev->recovery_offset > 0) { - sb->feature_map |= cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET); - sb->recovery_offset = cpu_to_le64(rdev->recovery_offset); + !test_bit(In_sync, &rdev->flags)) { + if (mddev->curr_resync_completed > rdev->recovery_offset) + rdev->recovery_offset = mddev->curr_resync_completed; + if (rdev->recovery_offset > 0) { + sb->feature_map |= + cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET); + sb->recovery_offset = + cpu_to_le64(rdev->recovery_offset); + } } if (mddev->reshape_position != MaxSector) { @@ -1365,7 +1432,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) { struct mdp_superblock_1 *sb; sector_t max_sectors; - if (num_sectors && num_sectors < rdev->mddev->size * 2) + if (num_sectors && num_sectors < rdev->mddev->dev_sectors) return 0; /* component must fit device */ if (rdev->sb_start < rdev->data_offset) { /* minor versions 1 and 2; superblock before data */ @@ -1381,7 +1448,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) sector_t sb_start; sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2; sb_start &= ~(sector_t)(4*2 - 1); - max_sectors = rdev->size * 2 + sb_start - rdev->sb_start; + max_sectors = rdev->sectors + sb_start - rdev->sb_start; if (!num_sectors || num_sectors > max_sectors) num_sectors = max_sectors; rdev->sb_start = sb_start; @@ -1433,6 +1500,38 @@ static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2) static LIST_HEAD(pending_raid_disks); +static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev) +{ + struct mdk_personality *pers = mddev->pers; + struct gendisk *disk = mddev->gendisk; + struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev); + struct blk_integrity *bi_mddev = blk_get_integrity(disk); + + /* Data integrity passthrough not supported on RAID 4, 5 and 6 */ + if (pers && pers->level >= 4 && pers->level <= 6) + return; + + /* If rdev is integrity capable, register profile for mddev */ + if (!bi_mddev && bi_rdev) { + if (blk_integrity_register(disk, bi_rdev)) + printk(KERN_ERR "%s: %s Could not register integrity!\n", + __func__, disk->disk_name); + else + printk(KERN_NOTICE "Enabling data integrity on %s\n", + disk->disk_name); + return; + } + + /* Check that mddev and rdev have matching profiles */ + if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) { + printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__, + disk->disk_name, rdev->bdev->bd_disk->disk_name); + printk(KERN_NOTICE "Disabling data integrity on %s\n", + disk->disk_name); + blk_integrity_unregister(disk); + } +} + static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) { char b[BDEVNAME_SIZE]; @@ -1449,8 +1548,9 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) if (find_rdev(mddev, rdev->bdev->bd_dev)) return -EEXIST; - /* make sure rdev->size exceeds mddev->size */ - if (rdev->size && (mddev->size == 0 || rdev->size < mddev->size)) { + /* make sure rdev->sectors exceeds mddev->dev_sectors */ + if (rdev->sectors && (mddev->dev_sectors == 0 || + rdev->sectors < mddev->dev_sectors)) { if (mddev->pers) { /* Cannot change size, so fail * If mddev->level <= 0, then we don't care @@ -1459,7 +1559,7 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) if (mddev->level > 0) return -ENOSPC; } else - mddev->size = rdev->size; + mddev->dev_sectors = rdev->sectors; } /* Verify rdev->desc_nr is unique. @@ -1503,6 +1603,8 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) /* May as well allow recovery to be retried once */ mddev->recovery_disabled = 0; + + md_integrity_check(rdev, mddev); return 0; fail: @@ -1713,8 +1815,8 @@ static void print_sb_1(struct mdp_superblock_1 *sb) static void print_rdev(mdk_rdev_t *rdev, int major_version) { char b[BDEVNAME_SIZE]; - printk(KERN_INFO "md: rdev %s, SZ:%08llu F:%d S:%d DN:%u\n", - bdevname(rdev->bdev,b), (unsigned long long)rdev->size, + printk(KERN_INFO "md: rdev %s, Sect:%08llu F:%d S:%d DN:%u\n", + bdevname(rdev->bdev, b), (unsigned long long)rdev->sectors, test_bit(Faulty, &rdev->flags), test_bit(In_sync, &rdev->flags), rdev->desc_nr); if (rdev->sb_loaded) { @@ -2153,7 +2255,7 @@ offset_store(mdk_rdev_t *rdev, const char *buf, size_t len) return -EINVAL; if (rdev->mddev->pers && rdev->raid_disk >= 0) return -EBUSY; - if (rdev->size && rdev->mddev->external) + if (rdev->sectors && rdev->mddev->external) /* Must set offset before size, so overlap checks * can be sane */ return -EBUSY; @@ -2167,7 +2269,7 @@ __ATTR(offset, S_IRUGO|S_IWUSR, offset_show, offset_store); static ssize_t rdev_size_show(mdk_rdev_t *rdev, char *page) { - return sprintf(page, "%llu\n", (unsigned long long)rdev->size); + return sprintf(page, "%llu\n", (unsigned long long)rdev->sectors / 2); } static int overlaps(sector_t s1, sector_t l1, sector_t s2, sector_t l2) @@ -2180,34 +2282,52 @@ static int overlaps(sector_t s1, sector_t l1, sector_t s2, sector_t l2) return 1; } +static int strict_blocks_to_sectors(const char *buf, sector_t *sectors) +{ + unsigned long long blocks; + sector_t new; + + if (strict_strtoull(buf, 10, &blocks) < 0) + return -EINVAL; + + if (blocks & 1ULL << (8 * sizeof(blocks) - 1)) + return -EINVAL; /* sector conversion overflow */ + + new = blocks * 2; + if (new != blocks * 2) + return -EINVAL; /* unsigned long long to sector_t overflow */ + + *sectors = new; + return 0; +} + static ssize_t rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) { - unsigned long long size; - unsigned long long oldsize = rdev->size; mddev_t *my_mddev = rdev->mddev; + sector_t oldsectors = rdev->sectors; + sector_t sectors; - if (strict_strtoull(buf, 10, &size) < 0) + if (strict_blocks_to_sectors(buf, §ors) < 0) return -EINVAL; if (my_mddev->pers && rdev->raid_disk >= 0) { if (my_mddev->persistent) { - size = super_types[my_mddev->major_version]. - rdev_size_change(rdev, size * 2); - if (!size) + sectors = super_types[my_mddev->major_version]. + rdev_size_change(rdev, sectors); + if (!sectors) return -EBUSY; - } else if (!size) { - size = (rdev->bdev->bd_inode->i_size >> 10); - size -= rdev->data_offset/2; - } + } else if (!sectors) + sectors = (rdev->bdev->bd_inode->i_size >> 9) - + rdev->data_offset; } - if (size < my_mddev->size) + if (sectors < my_mddev->dev_sectors) return -EINVAL; /* component must fit device */ - rdev->size = size; - if (size > oldsize && my_mddev->external) { + rdev->sectors = sectors; + if (sectors > oldsectors && my_mddev->external) { /* need to check that all other rdevs with the same ->bdev * do not overlap. We need to unlock the mddev to avoid - * a deadlock. We have already changed rdev->size, and if + * a deadlock. We have already changed rdev->sectors, and if * we have to change it back, we will have the lock again. */ mddev_t *mddev; @@ -2223,9 +2343,9 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (test_bit(AllReserved, &rdev2->flags) || (rdev->bdev == rdev2->bdev && rdev != rdev2 && - overlaps(rdev->data_offset, rdev->size * 2, + overlaps(rdev->data_offset, rdev->sectors, rdev2->data_offset, - rdev2->size * 2))) { + rdev2->sectors))) { overlap = 1; break; } @@ -2239,11 +2359,11 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (overlap) { /* Someone else could have slipped in a size * change here, but doing so is just silly. - * We put oldsize back because we *know* it is + * We put oldsectors back because we *know* it is * safe, and trust userspace not to race with * itself */ - rdev->size = oldsize; + rdev->sectors = oldsectors; return -EBUSY; } } @@ -2547,18 +2667,101 @@ level_show(mddev_t *mddev, char *page) static ssize_t level_store(mddev_t *mddev, const char *buf, size_t len) { + char level[16]; ssize_t rv = len; - if (mddev->pers) + struct mdk_personality *pers; + void *priv; + + if (mddev->pers == NULL) { + if (len == 0) + return 0; + if (len >= sizeof(mddev->clevel)) + return -ENOSPC; + strncpy(mddev->clevel, buf, len); + if (mddev->clevel[len-1] == '\n') + len--; + mddev->clevel[len] = 0; + mddev->level = LEVEL_NONE; + return rv; + } + + /* request to change the personality. Need to ensure: + * - array is not engaged in resync/recovery/reshape + * - old personality can be suspended + * - new personality will access other array. + */ + + if (mddev->sync_thread || mddev->reshape_position != MaxSector) return -EBUSY; - if (len == 0) - return 0; - if (len >= sizeof(mddev->clevel)) - return -ENOSPC; - strncpy(mddev->clevel, buf, len); - if (mddev->clevel[len-1] == '\n') + + if (!mddev->pers->quiesce) { + printk(KERN_WARNING "md: %s: %s does not support online personality change\n", + mdname(mddev), mddev->pers->name); + return -EINVAL; + } + + /* Now find the new personality */ + if (len == 0 || len >= sizeof(level)) + return -EINVAL; + strncpy(level, buf, len); + if (level[len-1] == '\n') len--; - mddev->clevel[len] = 0; - mddev->level = LEVEL_NONE; + level[len] = 0; + + request_module("md-%s", level); + spin_lock(&pers_lock); + pers = find_pers(LEVEL_NONE, level); + if (!pers || !try_module_get(pers->owner)) { + spin_unlock(&pers_lock); + printk(KERN_WARNING "md: personality %s not loaded\n", level); + return -EINVAL; + } + spin_unlock(&pers_lock); + + if (pers == mddev->pers) { + /* Nothing to do! */ + module_put(pers->owner); + return rv; + } + if (!pers->takeover) { + module_put(pers->owner); + printk(KERN_WARNING "md: %s: %s does not support personality takeover\n", + mdname(mddev), level); + return -EINVAL; + } + + /* ->takeover must set new_* and/or delta_disks + * if it succeeds, and may set them when it fails. + */ + priv = pers->takeover(mddev); + if (IS_ERR(priv)) { + mddev->new_level = mddev->level; + mddev->new_layout = mddev->layout; + mddev->new_chunk = mddev->chunk_size; + mddev->raid_disks -= mddev->delta_disks; + mddev->delta_disks = 0; + module_put(pers->owner); + printk(KERN_WARNING "md: %s: %s would not accept array\n", + mdname(mddev), level); + return PTR_ERR(priv); + } + + /* Looks like we have a winner */ + mddev_suspend(mddev); + mddev->pers->stop(mddev); + module_put(mddev->pers->owner); + mddev->pers = pers; + mddev->private = priv; + strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel)); + mddev->level = mddev->new_level; + mddev->layout = mddev->new_layout; + mddev->chunk_size = mddev->new_chunk; + mddev->delta_disks = 0; + pers->run(mddev); + mddev_resume(mddev); + set_bit(MD_CHANGE_DEVS, &mddev->flags); + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + md_wakeup_thread(mddev->thread); return rv; } @@ -2586,12 +2789,18 @@ layout_store(mddev_t *mddev, const char *buf, size_t len) if (!*buf || (*e && *e != '\n')) return -EINVAL; - if (mddev->pers) - return -EBUSY; - if (mddev->reshape_position != MaxSector) + if (mddev->pers) { + int err; + if (mddev->pers->reconfig == NULL) + return -EBUSY; + err = mddev->pers->reconfig(mddev, n, -1); + if (err) + return err; + } else { mddev->new_layout = n; - else - mddev->layout = n; + if (mddev->reshape_position == MaxSector) + mddev->layout = n; + } return len; } static struct md_sysfs_entry md_layout = @@ -2648,19 +2857,24 @@ chunk_size_show(mddev_t *mddev, char *page) static ssize_t chunk_size_store(mddev_t *mddev, const char *buf, size_t len) { - /* can only set chunk_size if array is not yet active */ char *e; unsigned long n = simple_strtoul(buf, &e, 10); if (!*buf || (*e && *e != '\n')) return -EINVAL; - if (mddev->pers) - return -EBUSY; - else if (mddev->reshape_position != MaxSector) + if (mddev->pers) { + int err; + if (mddev->pers->reconfig == NULL) + return -EBUSY; + err = mddev->pers->reconfig(mddev, -1, n); + if (err) + return err; + } else { mddev->new_chunk = n; - else - mddev->chunk_size = n; + if (mddev->reshape_position == MaxSector) + mddev->chunk_size = n; + } return len; } static struct md_sysfs_entry md_chunk_size = @@ -2669,6 +2883,8 @@ __ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store); static ssize_t resync_start_show(mddev_t *mddev, char *page) { + if (mddev->recovery_cp == MaxSector) + return sprintf(page, "none\n"); return sprintf(page, "%llu\n", (unsigned long long)mddev->recovery_cp); } @@ -2766,7 +2982,7 @@ array_state_show(mddev_t *mddev, char *page) else { if (list_empty(&mddev->disks) && mddev->raid_disks == 0 && - mddev->size == 0) + mddev->dev_sectors == 0) st = clear; else st = inactive; @@ -2973,7 +3189,8 @@ __ATTR(bitmap_set_bits, S_IWUSR, null_show, bitmap_store); static ssize_t size_show(mddev_t *mddev, char *page) { - return sprintf(page, "%llu\n", (unsigned long long)mddev->size); + return sprintf(page, "%llu\n", + (unsigned long long)mddev->dev_sectors / 2); } static int update_size(mddev_t *mddev, sector_t num_sectors); @@ -2985,20 +3202,18 @@ size_store(mddev_t *mddev, const char *buf, size_t len) * not increase it (except from 0). * If array is active, we can try an on-line resize */ - char *e; - int err = 0; - unsigned long long size = simple_strtoull(buf, &e, 10); - if (!*buf || *buf == '\n' || - (*e && *e != '\n')) - return -EINVAL; + sector_t sectors; + int err = strict_blocks_to_sectors(buf, §ors); + if (err < 0) + return err; if (mddev->pers) { - err = update_size(mddev, size * 2); + err = update_size(mddev, sectors); md_update_sb(mddev, 1); } else { - if (mddev->size == 0 || - mddev->size > size) - mddev->size = size; + if (mddev->dev_sectors == 0 || + mddev->dev_sectors > sectors) + mddev->dev_sectors = sectors; else err = -ENOSPC; } @@ -3251,6 +3466,8 @@ static ssize_t sync_speed_show(mddev_t *mddev, char *page) { unsigned long resync, dt, db; + if (mddev->curr_resync == 0) + return sprintf(page, "none\n"); resync = mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active); dt = (jiffies - mddev->resync_mark) / HZ; if (!dt) dt++; @@ -3263,15 +3480,15 @@ static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed); static ssize_t sync_completed_show(mddev_t *mddev, char *page) { - unsigned long max_blocks, resync; + unsigned long max_sectors, resync; if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) - max_blocks = mddev->resync_max_sectors; + max_sectors = mddev->resync_max_sectors; else - max_blocks = mddev->size << 1; + max_sectors = mddev->dev_sectors; resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active)); - return sprintf(page, "%lu / %lu\n", resync, max_blocks); + return sprintf(page, "%lu / %lu\n", resync, max_sectors); } static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed); @@ -3431,6 +3648,57 @@ static struct md_sysfs_entry md_reshape_position = __ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show, reshape_position_store); +static ssize_t +array_size_show(mddev_t *mddev, char *page) +{ + if (mddev->external_size) + return sprintf(page, "%llu\n", + (unsigned long long)mddev->array_sectors/2); + else + return sprintf(page, "default\n"); +} + +static ssize_t +array_size_store(mddev_t *mddev, const char *buf, size_t len) +{ + sector_t sectors; + + if (strncmp(buf, "default", 7) == 0) { + if (mddev->pers) + sectors = mddev->pers->size(mddev, 0, 0); + else + sectors = mddev->array_sectors; + + mddev->external_size = 0; + } else { + if (strict_blocks_to_sectors(buf, §ors) < 0) + return -EINVAL; + if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors) + return -EINVAL; + + mddev->external_size = 1; + } + + mddev->array_sectors = sectors; + set_capacity(mddev->gendisk, mddev->array_sectors); + if (mddev->pers) { + struct block_device *bdev = bdget_disk(mddev->gendisk, 0); + + if (bdev) { + mutex_lock(&bdev->bd_inode->i_mutex); + i_size_write(bdev->bd_inode, + (loff_t)mddev->array_sectors << 9); + mutex_unlock(&bdev->bd_inode->i_mutex); + bdput(bdev); + } + } + + return len; +} + +static struct md_sysfs_entry md_array_size = +__ATTR(array_size, S_IRUGO|S_IWUSR, array_size_show, + array_size_store); static struct attribute *md_default_attrs[] = { &md_level.attr, @@ -3444,6 +3712,7 @@ static struct attribute *md_default_attrs[] = { &md_safe_delay.attr, &md_array_state.attr, &md_reshape_position.attr, + &md_array_size.attr, NULL, }; @@ -3602,10 +3871,12 @@ static int md_alloc(dev_t dev, char *name) mddev_put(mddev); return -ENOMEM; } + mddev->queue->queuedata = mddev; + /* Can be unlocked because the queue is new: no concurrency */ queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue); - blk_queue_make_request(mddev->queue, md_fail_request); + blk_queue_make_request(mddev->queue, md_make_request); disk = alloc_disk(1 << shift); if (!disk) { @@ -3731,13 +4002,13 @@ static int do_md_run(mddev_t * mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { if (test_bit(Faulty, &rdev->flags)) continue; - if (rdev->size < chunk_size / 1024) { + if (rdev->sectors < chunk_size / 512) { printk(KERN_WARNING "md: Dev %s smaller than chunk_size:" - " %lluk < %dk\n", + " %llu < %d\n", bdevname(rdev->bdev,b), - (unsigned long long)rdev->size, - chunk_size / 1024); + (unsigned long long)rdev->sectors, + chunk_size / 512); return -EINVAL; } } @@ -3761,11 +4032,11 @@ static int do_md_run(mddev_t * mddev) /* perform some consistency tests on the device. * We don't want the data to overlap the metadata, - * Internal Bitmap issues has handled elsewhere. + * Internal Bitmap issues have been handled elsewhere. */ if (rdev->data_offset < rdev->sb_start) { - if (mddev->size && - rdev->data_offset + mddev->size*2 + if (mddev->dev_sectors && + rdev->data_offset + mddev->dev_sectors > rdev->sb_start) { printk("md: %s: data overlaps metadata\n", mdname(mddev)); @@ -3801,9 +4072,16 @@ static int do_md_run(mddev_t * mddev) } mddev->pers = pers; spin_unlock(&pers_lock); - mddev->level = pers->level; + if (mddev->level != pers->level) { + mddev->level = pers->level; + mddev->new_level = pers->level; + } strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel)); + if (pers->level >= 4 && pers->level <= 6) + /* Cannot support integrity (yet) */ + blk_integrity_unregister(mddev->gendisk); + if (mddev->reshape_position != MaxSector && pers->start_reshape == NULL) { /* This personality cannot handle reshaping... */ @@ -3843,7 +4121,9 @@ static int do_md_run(mddev_t * mddev) } mddev->recovery = 0; - mddev->resync_max_sectors = mddev->size << 1; /* may be over-ridden by personality */ + /* may be over-ridden by personality */ + mddev->resync_max_sectors = mddev->dev_sectors; + mddev->barriers_work = 1; mddev->ok_start_degraded = start_dirty_degraded; @@ -3853,7 +4133,17 @@ static int do_md_run(mddev_t * mddev) err = mddev->pers->run(mddev); if (err) printk(KERN_ERR "md: pers->run() failed ...\n"); - else if (mddev->pers->sync_request) { + else if (mddev->pers->size(mddev, 0, 0) < mddev->array_sectors) { + WARN_ONCE(!mddev->external_size, "%s: default size too small," + " but 'external_size' not in effect?\n", __func__); + printk(KERN_ERR + "md: invalid array_size %llu > default size %llu\n", + (unsigned long long)mddev->array_sectors / 2, + (unsigned long long)mddev->pers->size(mddev, 0, 0) / 2); + err = -EINVAL; + mddev->pers->stop(mddev); + } + if (err == 0 && mddev->pers->sync_request) { err = bitmap_create(mddev); if (err) { printk(KERN_ERR "%s: failed to create bitmap (%d)\n", @@ -3899,16 +4189,6 @@ static int do_md_run(mddev_t * mddev) set_capacity(disk, mddev->array_sectors); - /* If we call blk_queue_make_request here, it will - * re-initialise max_sectors etc which may have been - * refined inside -> run. So just set the bits we need to set. - * Most initialisation happended when we called - * blk_queue_make_request(..., md_fail_request) - * earlier. - */ - mddev->queue->queuedata = mddev; - mddev->queue->make_request_fn = mddev->pers->make_request; - /* If there is a partially-recovered drive we need to * start recovery here. If we leave it to md_check_recovery, * it will remove the drives and not do the right thing @@ -4038,7 +4318,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) md_super_wait(mddev); if (mddev->ro) set_disk_ro(disk, 0); - blk_queue_make_request(mddev->queue, md_fail_request); + mddev->pers->stop(mddev); mddev->queue->merge_bvec_fn = NULL; mddev->queue->unplug_fn = NULL; @@ -4095,7 +4375,8 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) export_array(mddev); mddev->array_sectors = 0; - mddev->size = 0; + mddev->external_size = 0; + mddev->dev_sectors = 0; mddev->raid_disks = 0; mddev->recovery_cp = 0; mddev->resync_min = 0; @@ -4135,6 +4416,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) printk(KERN_INFO "md: %s switched to read-only mode.\n", mdname(mddev)); err = 0; + blk_integrity_unregister(disk); md_new_event(mddev); sysfs_notify_dirent(mddev->sysfs_state); out: @@ -4300,8 +4582,8 @@ static int get_array_info(mddev_t * mddev, void __user * arg) info.patch_version = MD_PATCHLEVEL_VERSION; info.ctime = mddev->ctime; info.level = mddev->level; - info.size = mddev->size; - if (info.size != mddev->size) /* overflow */ + info.size = mddev->dev_sectors / 2; + if (info.size != mddev->dev_sectors / 2) /* overflow */ info.size = -1; info.nr_disks = nr; info.raid_disks = mddev->raid_disks; @@ -4480,6 +4762,8 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) clear_bit(In_sync, &rdev->flags); /* just to be sure */ if (info->state & (1<<MD_DISK_WRITEMOSTLY)) set_bit(WriteMostly, &rdev->flags); + else + clear_bit(WriteMostly, &rdev->flags); rdev->raid_disk = -1; err = bind_rdev_to_array(rdev, mddev); @@ -4543,7 +4827,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) rdev->sb_start = rdev->bdev->bd_inode->i_size / 512; } else rdev->sb_start = calc_dev_sboffset(rdev->bdev); - rdev->size = calc_num_sectors(rdev, mddev->chunk_size) / 2; + rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size); err = bind_rdev_to_array(rdev, mddev); if (err) { @@ -4613,7 +4897,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) else rdev->sb_start = rdev->bdev->bd_inode->i_size / 512; - rdev->size = calc_num_sectors(rdev, mddev->chunk_size) / 2; + rdev->sectors = calc_num_sectors(rdev, mddev->chunk_size); if (test_bit(Faulty, &rdev->flags)) { printk(KERN_WARNING @@ -4749,7 +5033,7 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) mddev->level = info->level; mddev->clevel[0] = 0; - mddev->size = info->size; + mddev->dev_sectors = 2 * (sector_t)info->size; mddev->raid_disks = info->raid_disks; /* don't set md_minor, it is determined by which /dev/md* was * openned @@ -4788,6 +5072,17 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info) return 0; } +void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors) +{ + WARN(!mddev_is_locked(mddev), "%s: unlocked mddev!\n", __func__); + + if (mddev->external_size) + return; + + mddev->array_sectors = array_sectors; +} +EXPORT_SYMBOL(md_set_array_sectors); + static int update_size(mddev_t *mddev, sector_t num_sectors) { mdk_rdev_t *rdev; @@ -4814,8 +5109,7 @@ static int update_size(mddev_t *mddev, sector_t num_sectors) */ return -EBUSY; list_for_each_entry(rdev, &mddev->disks, same_set) { - sector_t avail; - avail = rdev->size * 2; + sector_t avail = rdev->sectors; if (fit && (num_sectors == 0 || num_sectors > avail)) num_sectors = avail; @@ -4887,12 +5181,18 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info) ) return -EINVAL; /* Check there is only one change */ - if (info->size >= 0 && mddev->size != info->size) cnt++; - if (mddev->raid_disks != info->raid_disks) cnt++; - if (mddev->layout != info->layout) cnt++; - if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) cnt++; - if (cnt == 0) return 0; - if (cnt > 1) return -EINVAL; + if (info->size >= 0 && mddev->dev_sectors / 2 != info->size) + cnt++; + if (mddev->raid_disks != info->raid_disks) + cnt++; + if (mddev->layout != info->layout) + cnt++; + if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) + cnt++; + if (cnt == 0) + return 0; + if (cnt > 1) + return -EINVAL; if (mddev->layout != info->layout) { /* Change layout @@ -4904,7 +5204,7 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info) else return mddev->pers->reconfig(mddev, info->layout, -1); } - if (info->size >= 0 && mddev->size != info->size) + if (info->size >= 0 && mddev->dev_sectors / 2 != info->size) rv = update_size(mddev, (sector_t)info->size * 2); if (mddev->raid_disks != info->raid_disks) @@ -5331,6 +5631,8 @@ mdk_thread_t *md_register_thread(void (*run) (mddev_t *), mddev_t *mddev, void md_unregister_thread(mdk_thread_t *thread) { + if (!thread) + return; dprintk("interrupting MD-thread pid %d\n", task_pid_nr(thread->tsk)); kthread_stop(thread->tsk); @@ -5404,7 +5706,7 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) max_blocks = mddev->resync_max_sectors >> 1; else - max_blocks = mddev->size; + max_blocks = mddev->dev_sectors / 2; /* * Should not happen. @@ -5537,7 +5839,7 @@ struct mdstat_info { static int md_seq_show(struct seq_file *seq, void *v) { mddev_t *mddev = v; - sector_t size; + sector_t sectors; mdk_rdev_t *rdev; struct mdstat_info *mi = seq->private; struct bitmap *bitmap; @@ -5573,7 +5875,7 @@ static int md_seq_show(struct seq_file *seq, void *v) seq_printf(seq, " %s", mddev->pers->name); } - size = 0; + sectors = 0; list_for_each_entry(rdev, &mddev->disks, same_set) { char b[BDEVNAME_SIZE]; seq_printf(seq, " %s[%d]", @@ -5585,7 +5887,7 @@ static int md_seq_show(struct seq_file *seq, void *v) continue; } else if (rdev->raid_disk < 0) seq_printf(seq, "(S)"); /* spare */ - size += rdev->size; + sectors += rdev->sectors; } if (!list_empty(&mddev->disks)) { @@ -5595,7 +5897,7 @@ static int md_seq_show(struct seq_file *seq, void *v) mddev->array_sectors / 2); else seq_printf(seq, "\n %llu blocks", - (unsigned long long)size); + (unsigned long long)sectors / 2); } if (mddev->persistent) { if (mddev->major_version != 0 || @@ -5722,19 +6024,19 @@ int unregister_md_personality(struct mdk_personality *p) return 0; } -static int is_mddev_idle(mddev_t *mddev) +static int is_mddev_idle(mddev_t *mddev, int init) { mdk_rdev_t * rdev; int idle; - long curr_events; + int curr_events; idle = 1; rcu_read_lock(); rdev_for_each_rcu(rdev, mddev) { struct gendisk *disk = rdev->bdev->bd_contains->bd_disk; - curr_events = part_stat_read(&disk->part0, sectors[0]) + - part_stat_read(&disk->part0, sectors[1]) - - atomic_read(&disk->sync_io); + curr_events = (int)part_stat_read(&disk->part0, sectors[0]) + + (int)part_stat_read(&disk->part0, sectors[1]) - + atomic_read(&disk->sync_io); /* sync IO will cause sync_io to increase before the disk_stats * as sync_io is counted when a request starts, and * disk_stats is counted when it completes. @@ -5757,7 +6059,7 @@ static int is_mddev_idle(mddev_t *mddev) * always make curr_events less than last_events. * */ - if (curr_events - rdev->last_events > 4096) { + if (init || curr_events - rdev->last_events > 64) { rdev->last_events = curr_events; idle = 0; } @@ -5980,10 +6282,10 @@ void md_do_sync(mddev_t *mddev) j = mddev->recovery_cp; } else if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) - max_sectors = mddev->size << 1; + max_sectors = mddev->dev_sectors; else { /* recovery follows the physical size of devices */ - max_sectors = mddev->size << 1; + max_sectors = mddev->dev_sectors; j = MaxSector; list_for_each_entry(rdev, &mddev->disks, same_set) if (rdev->raid_disk >= 0 && @@ -6000,7 +6302,7 @@ void md_do_sync(mddev_t *mddev) "(but not more than %d KB/sec) for %s.\n", speed_max(mddev), desc); - is_mddev_idle(mddev); /* this also initializes IO event counters */ + is_mddev_idle(mddev, 1); /* this initializes IO event counters */ io_sectors = 0; for (m = 0; m < SYNC_MARKS; m++) { @@ -6040,6 +6342,18 @@ void md_do_sync(mddev_t *mddev) } if (kthread_should_stop()) goto interrupted; + + if (mddev->curr_resync > mddev->curr_resync_completed && + (mddev->curr_resync - mddev->curr_resync_completed) + > (max_sectors >> 4)) { + /* time to update curr_resync_completed */ + blk_unplug(mddev->queue); + wait_event(mddev->recovery_wait, + atomic_read(&mddev->recovery_active) == 0); + mddev->curr_resync_completed = + mddev->curr_resync; + set_bit(MD_CHANGE_CLEAN, &mddev->flags); + } sectors = mddev->pers->sync_request(mddev, j, &skipped, currspeed < speed_min(mddev)); if (sectors == 0) { @@ -6102,7 +6416,7 @@ void md_do_sync(mddev_t *mddev) if (currspeed > speed_min(mddev)) { if ((currspeed > speed_max(mddev)) || - !is_mddev_idle(mddev)) { + !is_mddev_idle(mddev, 0)) { msleep(500); goto repeat; } @@ -6173,6 +6487,8 @@ static int remove_and_add_spares(mddev_t *mddev) mdk_rdev_t *rdev; int spares = 0; + mddev->curr_resync_completed = 0; + list_for_each_entry(rdev, &mddev->disks, same_set) if (rdev->raid_disk >= 0 && !test_bit(Blocked, &rdev->flags) && @@ -6327,6 +6643,9 @@ void md_check_recovery(mddev_t *mddev) sysfs_notify(&mddev->kobj, NULL, "degraded"); } + if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + mddev->pers->finish_reshape) + mddev->pers->finish_reshape(mddev); md_update_sb(mddev, 1); /* if array is no-longer degraded, then any saved_raid_disk @@ -6470,13 +6789,13 @@ static void md_geninit(void) static int __init md_init(void) { - if (register_blkdev(MAJOR_NR, "md")) + if (register_blkdev(MD_MAJOR, "md")) return -1; if ((mdp_major=register_blkdev(0, "mdp"))<=0) { - unregister_blkdev(MAJOR_NR, "md"); + unregister_blkdev(MD_MAJOR, "md"); return -1; } - blk_register_region(MKDEV(MAJOR_NR, 0), 1UL<<MINORBITS, THIS_MODULE, + blk_register_region(MKDEV(MD_MAJOR, 0), 1UL<<MINORBITS, THIS_MODULE, md_probe, NULL, NULL); blk_register_region(MKDEV(mdp_major, 0), 1UL<<MINORBITS, THIS_MODULE, md_probe, NULL, NULL); @@ -6562,10 +6881,10 @@ static __exit void md_exit(void) mddev_t *mddev; struct list_head *tmp; - blk_unregister_region(MKDEV(MAJOR_NR,0), 1U << MINORBITS); + blk_unregister_region(MKDEV(MD_MAJOR,0), 1U << MINORBITS); blk_unregister_region(MKDEV(mdp_major,0), 1U << MINORBITS); - unregister_blkdev(MAJOR_NR,"md"); + unregister_blkdev(MD_MAJOR,"md"); unregister_blkdev(mdp_major, "mdp"); unregister_reboot_notifier(&md_notifier); unregister_sysctl_table(raid_table_header); diff --git a/drivers/md/md.h b/drivers/md/md.h new file mode 100644 index 000000000000..e9b7f54c24d6 --- /dev/null +++ b/drivers/md/md.h @@ -0,0 +1,436 @@ +/* + md_k.h : kernel internal structure of the Linux MD driver + Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _MD_K_H +#define _MD_K_H + +#ifdef CONFIG_BLOCK + +#define MaxSector (~(sector_t)0) + +typedef struct mddev_s mddev_t; +typedef struct mdk_rdev_s mdk_rdev_t; + +/* + * options passed in raidrun: + */ + +/* Currently this must fit in an 'int' */ +#define MAX_CHUNK_SIZE (1<<30) + +/* + * MD's 'extended' device + */ +struct mdk_rdev_s +{ + struct list_head same_set; /* RAID devices within the same set */ + + sector_t sectors; /* Device size (in 512bytes sectors) */ + mddev_t *mddev; /* RAID array if running */ + int last_events; /* IO event timestamp */ + + struct block_device *bdev; /* block device handle */ + + struct page *sb_page; + int sb_loaded; + __u64 sb_events; + sector_t data_offset; /* start of data in array */ + sector_t sb_start; /* offset of the super block (in 512byte sectors) */ + int sb_size; /* bytes in the superblock */ + int preferred_minor; /* autorun support */ + + struct kobject kobj; + + /* A device can be in one of three states based on two flags: + * Not working: faulty==1 in_sync==0 + * Fully working: faulty==0 in_sync==1 + * Working, but not + * in sync with array + * faulty==0 in_sync==0 + * + * It can never have faulty==1, in_sync==1 + * This reduces the burden of testing multiple flags in many cases + */ + + unsigned long flags; +#define Faulty 1 /* device is known to have a fault */ +#define In_sync 2 /* device is in_sync with rest of array */ +#define WriteMostly 4 /* Avoid reading if at all possible */ +#define BarriersNotsupp 5 /* BIO_RW_BARRIER is not supported */ +#define AllReserved 6 /* If whole device is reserved for + * one array */ +#define AutoDetected 7 /* added by auto-detect */ +#define Blocked 8 /* An error occured on an externally + * managed array, don't allow writes + * until it is cleared */ +#define StateChanged 9 /* Faulty or Blocked has changed during + * interrupt, so it needs to be + * notified by the thread */ + wait_queue_head_t blocked_wait; + + int desc_nr; /* descriptor index in the superblock */ + int raid_disk; /* role of device in array */ + int saved_raid_disk; /* role that device used to have in the + * array and could again if we did a partial + * resync from the bitmap + */ + sector_t recovery_offset;/* If this device has been partially + * recovered, this is where we were + * up to. + */ + + atomic_t nr_pending; /* number of pending requests. + * only maintained for arrays that + * support hot removal + */ + atomic_t read_errors; /* number of consecutive read errors that + * we have tried to ignore. + */ + atomic_t corrected_errors; /* number of corrected read errors, + * for reporting to userspace and storing + * in superblock. + */ + struct work_struct del_work; /* used for delayed sysfs removal */ + + struct sysfs_dirent *sysfs_state; /* handle for 'state' + * sysfs entry */ +}; + +struct mddev_s +{ + void *private; + struct mdk_personality *pers; + dev_t unit; + int md_minor; + struct list_head disks; + unsigned long flags; +#define MD_CHANGE_DEVS 0 /* Some device status has changed */ +#define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */ +#define MD_CHANGE_PENDING 2 /* superblock update in progress */ + + int suspended; + atomic_t active_io; + int ro; + + struct gendisk *gendisk; + + struct kobject kobj; + int hold_active; +#define UNTIL_IOCTL 1 +#define UNTIL_STOP 2 + + /* Superblock information */ + int major_version, + minor_version, + patch_version; + int persistent; + int external; /* metadata is + * managed externally */ + char metadata_type[17]; /* externally set*/ + int chunk_size; + time_t ctime, utime; + int level, layout; + char clevel[16]; + int raid_disks; + int max_disks; + sector_t dev_sectors; /* used size of + * component devices */ + sector_t array_sectors; /* exported array size */ + int external_size; /* size managed + * externally */ + __u64 events; + + char uuid[16]; + + /* If the array is being reshaped, we need to record the + * new shape and an indication of where we are up to. + * This is written to the superblock. + * If reshape_position is MaxSector, then no reshape is happening (yet). + */ + sector_t reshape_position; + int delta_disks, new_level, new_layout, new_chunk; + + struct mdk_thread_s *thread; /* management thread */ + struct mdk_thread_s *sync_thread; /* doing resync or reconstruct */ + sector_t curr_resync; /* last block scheduled */ + /* As resync requests can complete out of order, we cannot easily track + * how much resync has been completed. So we occasionally pause until + * everything completes, then set curr_resync_completed to curr_resync. + * As such it may be well behind the real resync mark, but it is a value + * we are certain of. + */ + sector_t curr_resync_completed; + unsigned long resync_mark; /* a recent timestamp */ + sector_t resync_mark_cnt;/* blocks written at resync_mark */ + sector_t curr_mark_cnt; /* blocks scheduled now */ + + sector_t resync_max_sectors; /* may be set by personality */ + + sector_t resync_mismatches; /* count of sectors where + * parity/replica mismatch found + */ + + /* allow user-space to request suspension of IO to regions of the array */ + sector_t suspend_lo; + sector_t suspend_hi; + /* if zero, use the system-wide default */ + int sync_speed_min; + int sync_speed_max; + + /* resync even though the same disks are shared among md-devices */ + int parallel_resync; + + int ok_start_degraded; + /* recovery/resync flags + * NEEDED: we might need to start a resync/recover + * RUNNING: a thread is running, or about to be started + * SYNC: actually doing a resync, not a recovery + * RECOVER: doing recovery, or need to try it. + * INTR: resync needs to be aborted for some reason + * DONE: thread is done and is waiting to be reaped + * REQUEST: user-space has requested a sync (used with SYNC) + * CHECK: user-space request for for check-only, no repair + * RESHAPE: A reshape is happening + * + * If neither SYNC or RESHAPE are set, then it is a recovery. + */ +#define MD_RECOVERY_RUNNING 0 +#define MD_RECOVERY_SYNC 1 +#define MD_RECOVERY_RECOVER 2 +#define MD_RECOVERY_INTR 3 +#define MD_RECOVERY_DONE 4 +#define MD_RECOVERY_NEEDED 5 +#define MD_RECOVERY_REQUESTED 6 +#define MD_RECOVERY_CHECK 7 +#define MD_RECOVERY_RESHAPE 8 +#define MD_RECOVERY_FROZEN 9 + + unsigned long recovery; + int recovery_disabled; /* if we detect that recovery + * will always fail, set this + * so we don't loop trying */ + + int in_sync; /* know to not need resync */ + struct mutex reconfig_mutex; + atomic_t active; /* general refcount */ + atomic_t openers; /* number of active opens */ + + int changed; /* true if we might need to reread partition info */ + int degraded; /* whether md should consider + * adding a spare + */ + int barriers_work; /* initialised to true, cleared as soon + * as a barrier request to slave + * fails. Only supported + */ + struct bio *biolist; /* bios that need to be retried + * because BIO_RW_BARRIER is not supported + */ + + atomic_t recovery_active; /* blocks scheduled, but not written */ + wait_queue_head_t recovery_wait; + sector_t recovery_cp; + sector_t resync_min; /* user requested sync + * starts here */ + sector_t resync_max; /* resync should pause + * when it gets here */ + + struct sysfs_dirent *sysfs_state; /* handle for 'array_state' + * file in sysfs. + */ + struct sysfs_dirent *sysfs_action; /* handle for 'sync_action' */ + + struct work_struct del_work; /* used for delayed sysfs removal */ + + spinlock_t write_lock; + wait_queue_head_t sb_wait; /* for waiting on superblock updates */ + atomic_t pending_writes; /* number of active superblock writes */ + + unsigned int safemode; /* if set, update "clean" superblock + * when no writes pending. + */ + unsigned int safemode_delay; + struct timer_list safemode_timer; + atomic_t writes_pending; + struct request_queue *queue; /* for plugging ... */ + + atomic_t write_behind; /* outstanding async IO */ + unsigned int max_write_behind; /* 0 = sync */ + + struct bitmap *bitmap; /* the bitmap for the device */ + struct file *bitmap_file; /* the bitmap file */ + long bitmap_offset; /* offset from superblock of + * start of bitmap. May be + * negative, but not '0' + */ + long default_bitmap_offset; /* this is the offset to use when + * hot-adding a bitmap. It should + * eventually be settable by sysfs. + */ + + struct list_head all_mddevs; +}; + + +static inline void rdev_dec_pending(mdk_rdev_t *rdev, mddev_t *mddev) +{ + int faulty = test_bit(Faulty, &rdev->flags); + if (atomic_dec_and_test(&rdev->nr_pending) && faulty) + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); +} + +static inline void md_sync_acct(struct block_device *bdev, unsigned long nr_sectors) +{ + atomic_add(nr_sectors, &bdev->bd_contains->bd_disk->sync_io); +} + +struct mdk_personality +{ + char *name; + int level; + struct list_head list; + struct module *owner; + int (*make_request)(struct request_queue *q, struct bio *bio); + int (*run)(mddev_t *mddev); + int (*stop)(mddev_t *mddev); + void (*status)(struct seq_file *seq, mddev_t *mddev); + /* error_handler must set ->faulty and clear ->in_sync + * if appropriate, and should abort recovery if needed + */ + void (*error_handler)(mddev_t *mddev, mdk_rdev_t *rdev); + int (*hot_add_disk) (mddev_t *mddev, mdk_rdev_t *rdev); + int (*hot_remove_disk) (mddev_t *mddev, int number); + int (*spare_active) (mddev_t *mddev); + sector_t (*sync_request)(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster); + int (*resize) (mddev_t *mddev, sector_t sectors); + sector_t (*size) (mddev_t *mddev, sector_t sectors, int raid_disks); + int (*check_reshape) (mddev_t *mddev); + int (*start_reshape) (mddev_t *mddev); + void (*finish_reshape) (mddev_t *mddev); + int (*reconfig) (mddev_t *mddev, int layout, int chunk_size); + /* quiesce moves between quiescence states + * 0 - fully active + * 1 - no new requests allowed + * others - reserved + */ + void (*quiesce) (mddev_t *mddev, int state); + /* takeover is used to transition an array from one + * personality to another. The new personality must be able + * to handle the data in the current layout. + * e.g. 2drive raid1 -> 2drive raid5 + * ndrive raid5 -> degraded n+1drive raid6 with special layout + * If the takeover succeeds, a new 'private' structure is returned. + * This needs to be installed and then ->run used to activate the + * array. + */ + void *(*takeover) (mddev_t *mddev); +}; + + +struct md_sysfs_entry { + struct attribute attr; + ssize_t (*show)(mddev_t *, char *); + ssize_t (*store)(mddev_t *, const char *, size_t); +}; + + +static inline char * mdname (mddev_t * mddev) +{ + return mddev->gendisk ? mddev->gendisk->disk_name : "mdX"; +} + +/* + * iterates through some rdev ringlist. It's safe to remove the + * current 'rdev'. Dont touch 'tmp' though. + */ +#define rdev_for_each_list(rdev, tmp, head) \ + list_for_each_entry_safe(rdev, tmp, head, same_set) + +/* + * iterates through the 'same array disks' ringlist + */ +#define rdev_for_each(rdev, tmp, mddev) \ + list_for_each_entry_safe(rdev, tmp, &((mddev)->disks), same_set) + +#define rdev_for_each_rcu(rdev, mddev) \ + list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set) + +typedef struct mdk_thread_s { + void (*run) (mddev_t *mddev); + mddev_t *mddev; + wait_queue_head_t wqueue; + unsigned long flags; + struct task_struct *tsk; + unsigned long timeout; +} mdk_thread_t; + +#define THREAD_WAKEUP 0 + +#define __wait_event_lock_irq(wq, condition, lock, cmd) \ +do { \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_UNINTERRUPTIBLE); \ + if (condition) \ + break; \ + spin_unlock_irq(&lock); \ + cmd; \ + schedule(); \ + spin_lock_irq(&lock); \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_event_lock_irq(wq, condition, lock, cmd) \ +do { \ + if (condition) \ + break; \ + __wait_event_lock_irq(wq, condition, lock, cmd); \ +} while (0) + +static inline void safe_put_page(struct page *p) +{ + if (p) put_page(p); +} + +#endif /* CONFIG_BLOCK */ +#endif + + +extern int register_md_personality(struct mdk_personality *p); +extern int unregister_md_personality(struct mdk_personality *p); +extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev), + mddev_t *mddev, const char *name); +extern void md_unregister_thread(mdk_thread_t *thread); +extern void md_wakeup_thread(mdk_thread_t *thread); +extern void md_check_recovery(mddev_t *mddev); +extern void md_write_start(mddev_t *mddev, struct bio *bi); +extern void md_write_end(mddev_t *mddev); +extern void md_done_sync(mddev_t *mddev, int blocks, int ok); +extern void md_error(mddev_t *mddev, mdk_rdev_t *rdev); + +extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, + sector_t sector, int size, struct page *page); +extern void md_super_wait(mddev_t *mddev); +extern int sync_page_io(struct block_device *bdev, sector_t sector, int size, + struct page *page, int rw); +extern void md_do_sync(mddev_t *mddev); +extern void md_new_event(mddev_t *mddev); +extern int md_allow_write(mddev_t *mddev); +extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev); +extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors); diff --git a/drivers/md/mktables.c b/drivers/md/mktables.c index b61d5767aae7..3b1500843bba 100644 --- a/drivers/md/mktables.c +++ b/drivers/md/mktables.c @@ -59,7 +59,7 @@ int main(int argc, char *argv[]) uint8_t v; uint8_t exptbl[256], invtbl[256]; - printf("#include \"raid6.h\"\n"); + printf("#include <linux/raid/pq.h>\n"); /* Compute multiplication table */ printf("\nconst u8 __attribute__((aligned(256)))\n" @@ -76,6 +76,9 @@ int main(int argc, char *argv[]) printf("\t},\n"); } printf("};\n"); + printf("#ifdef __KERNEL__\n"); + printf("EXPORT_SYMBOL(raid6_gfmul);\n"); + printf("#endif\n"); /* Compute power-of-2 table (exponent) */ v = 1; @@ -92,6 +95,9 @@ int main(int argc, char *argv[]) } } printf("};\n"); + printf("#ifdef __KERNEL__\n"); + printf("EXPORT_SYMBOL(raid6_gfexp);\n"); + printf("#endif\n"); /* Compute inverse table x^-1 == x^254 */ printf("\nconst u8 __attribute__((aligned(256)))\n" @@ -104,6 +110,9 @@ int main(int argc, char *argv[]) } } printf("};\n"); + printf("#ifdef __KERNEL__\n"); + printf("EXPORT_SYMBOL(raid6_gfinv);\n"); + printf("#endif\n"); /* Compute inv(2^x + 1) (exponent-xor-inverse) table */ printf("\nconst u8 __attribute__((aligned(256)))\n" @@ -115,6 +124,9 @@ int main(int argc, char *argv[]) (j == 7) ? '\n' : ' '); } printf("};\n"); + printf("#ifdef __KERNEL__\n"); + printf("EXPORT_SYMBOL(raid6_gfexi);\n"); + printf("#endif\n"); return 0; } diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index f6d08f241671..41ced0cbe823 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -19,7 +19,11 @@ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/raid/multipath.h> +#include <linux/blkdev.h> +#include <linux/raid/md_u.h> +#include <linux/seq_file.h> +#include "md.h" +#include "multipath.h" #define MAX_WORK_PER_DISK 128 @@ -402,6 +406,14 @@ static void multipathd (mddev_t *mddev) spin_unlock_irqrestore(&conf->device_lock, flags); } +static sector_t multipath_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + WARN_ONCE(sectors || raid_disks, + "%s does not support generic reshape\n", __func__); + + return mddev->dev_sectors; +} + static int multipath_run (mddev_t *mddev) { multipath_conf_t *conf; @@ -498,7 +510,7 @@ static int multipath_run (mddev_t *mddev) /* * Ok, everything is just fine now */ - mddev->array_sectors = mddev->size * 2; + md_set_array_sectors(mddev, multipath_size(mddev, 0, 0)); mddev->queue->unplug_fn = multipath_unplug; mddev->queue->backing_dev_info.congested_fn = multipath_congested; @@ -543,6 +555,7 @@ static struct mdk_personality multipath_personality = .error_handler = multipath_error, .hot_add_disk = multipath_add_disk, .hot_remove_disk= multipath_remove_disk, + .size = multipath_size, }; static int __init multipath_init (void) diff --git a/drivers/md/multipath.h b/drivers/md/multipath.h new file mode 100644 index 000000000000..6fa70b400cda --- /dev/null +++ b/drivers/md/multipath.h @@ -0,0 +1,40 @@ +#ifndef _MULTIPATH_H +#define _MULTIPATH_H + +struct multipath_info { + mdk_rdev_t *rdev; +}; + +struct multipath_private_data { + mddev_t *mddev; + struct multipath_info *multipaths; + int raid_disks; + int working_disks; + spinlock_t device_lock; + struct list_head retry_list; + + mempool_t *pool; +}; + +typedef struct multipath_private_data multipath_conf_t; + +/* + * this is the only point in the RAID code where we violate + * C type safety. mddev->private is an 'opaque' pointer. + */ +#define mddev_to_conf(mddev) ((multipath_conf_t *) mddev->private) + +/* + * this is our 'private' 'collective' MULTIPATH buffer head. + * it contains information about what kind of IO operations were started + * for this MULTIPATH operation, and about their status: + */ + +struct multipath_bh { + mddev_t *mddev; + struct bio *master_bio; + struct bio bio; + int path; + struct list_head retry_list; +}; +#endif diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index c605ba805586..c08d7559be55 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -18,7 +18,10 @@ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/raid/raid0.h> +#include <linux/blkdev.h> +#include <linux/seq_file.h> +#include "md.h" +#include "raid0.h" static void raid0_unplug(struct request_queue *q) { @@ -73,16 +76,15 @@ static int create_strip_zones (mddev_t *mddev) list_for_each_entry(rdev2, &mddev->disks, same_set) { printk(KERN_INFO "raid0: comparing %s(%llu)", bdevname(rdev1->bdev,b), - (unsigned long long)rdev1->size); + (unsigned long long)rdev1->sectors); printk(KERN_INFO " with %s(%llu)\n", bdevname(rdev2->bdev,b), - (unsigned long long)rdev2->size); + (unsigned long long)rdev2->sectors); if (rdev2 == rdev1) { printk(KERN_INFO "raid0: END\n"); break; } - if (rdev2->size == rdev1->size) - { + if (rdev2->sectors == rdev1->sectors) { /* * Not unique, don't count it as a new * group @@ -145,7 +147,7 @@ static int create_strip_zones (mddev_t *mddev) mddev->queue->max_sectors > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); - if (!smallest || (rdev1->size <smallest->size)) + if (!smallest || (rdev1->sectors < smallest->sectors)) smallest = rdev1; cnt++; } @@ -155,10 +157,10 @@ static int create_strip_zones (mddev_t *mddev) goto abort; } zone->nb_dev = cnt; - zone->sectors = smallest->size * cnt * 2; + zone->sectors = smallest->sectors * cnt; zone->zone_start = 0; - current_start = smallest->size * 2; + current_start = smallest->sectors; curr_zone_start = zone->sectors; /* now do the other zones */ @@ -177,29 +179,29 @@ static int create_strip_zones (mddev_t *mddev) rdev = conf->strip_zone[0].dev[j]; printk(KERN_INFO "raid0: checking %s ...", bdevname(rdev->bdev, b)); - if (rdev->size > current_start / 2) { - printk(KERN_INFO " contained as device %d\n", - c); - zone->dev[c] = rdev; - c++; - if (!smallest || (rdev->size <smallest->size)) { - smallest = rdev; - printk(KERN_INFO " (%llu) is smallest!.\n", - (unsigned long long)rdev->size); - } - } else + if (rdev->sectors <= current_start) { printk(KERN_INFO " nope.\n"); + continue; + } + printk(KERN_INFO " contained as device %d\n", c); + zone->dev[c] = rdev; + c++; + if (!smallest || rdev->sectors < smallest->sectors) { + smallest = rdev; + printk(KERN_INFO " (%llu) is smallest!.\n", + (unsigned long long)rdev->sectors); + } } zone->nb_dev = c; - zone->sectors = (smallest->size * 2 - current_start) * c; + zone->sectors = (smallest->sectors - current_start) * c; printk(KERN_INFO "raid0: zone->nb_dev: %d, sectors: %llu\n", zone->nb_dev, (unsigned long long)zone->sectors); zone->zone_start = curr_zone_start; curr_zone_start += zone->sectors; - current_start = smallest->size * 2; + current_start = smallest->sectors; printk(KERN_INFO "raid0: current zone start: %llu\n", (unsigned long long)current_start); } @@ -261,12 +263,25 @@ static int raid0_mergeable_bvec(struct request_queue *q, return max; } +static sector_t raid0_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + sector_t array_sectors = 0; + mdk_rdev_t *rdev; + + WARN_ONCE(sectors || raid_disks, + "%s does not support generic reshape\n", __func__); + + list_for_each_entry(rdev, &mddev->disks, same_set) + array_sectors += rdev->sectors; + + return array_sectors; +} + static int raid0_run (mddev_t *mddev) { unsigned cur=0, i=0, nb_zone; s64 sectors; raid0_conf_t *conf; - mdk_rdev_t *rdev; if (mddev->chunk_size == 0) { printk(KERN_ERR "md/raid0: non-zero chunk size required.\n"); @@ -291,16 +306,14 @@ static int raid0_run (mddev_t *mddev) goto out_free_conf; /* calculate array device size */ - mddev->array_sectors = 0; - list_for_each_entry(rdev, &mddev->disks, same_set) - mddev->array_sectors += rdev->size * 2; + md_set_array_sectors(mddev, raid0_size(mddev, 0, 0)); printk(KERN_INFO "raid0 : md_size is %llu sectors.\n", (unsigned long long)mddev->array_sectors); printk(KERN_INFO "raid0 : conf->spacing is %llu sectors.\n", (unsigned long long)conf->spacing); { - sector_t s = mddev->array_sectors; + sector_t s = raid0_size(mddev, 0, 0); sector_t space = conf->spacing; int round; conf->sector_shift = 0; @@ -509,6 +522,7 @@ static struct mdk_personality raid0_personality= .run = raid0_run, .stop = raid0_stop, .status = raid0_status, + .size = raid0_size, }; static int __init raid0_init (void) diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h new file mode 100644 index 000000000000..824b12eb1d4f --- /dev/null +++ b/drivers/md/raid0.h @@ -0,0 +1,28 @@ +#ifndef _RAID0_H +#define _RAID0_H + +struct strip_zone +{ + sector_t zone_start; /* Zone offset in md_dev (in sectors) */ + sector_t dev_start; /* Zone offset in real dev (in sectors) */ + sector_t sectors; /* Zone size in sectors */ + int nb_dev; /* # of devices attached to the zone */ + mdk_rdev_t **dev; /* Devices attached to the zone */ +}; + +struct raid0_private_data +{ + struct strip_zone **hash_table; /* Table of indexes into strip_zone */ + struct strip_zone *strip_zone; + mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */ + int nr_strip_zones; + + sector_t spacing; + int sector_shift; /* shift this before divide by spacing */ +}; + +typedef struct raid0_private_data raid0_conf_t; + +#define mddev_to_conf(mddev) ((raid0_conf_t *) mddev->private) + +#endif diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index e2466425d9ca..b4f4badc0068 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -31,10 +31,13 @@ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include "dm-bio-list.h" #include <linux/delay.h> -#include <linux/raid/raid1.h> -#include <linux/raid/bitmap.h> +#include <linux/blkdev.h> +#include <linux/seq_file.h> +#include "md.h" +#include "dm-bio-list.h" +#include "raid1.h" +#include "bitmap.h" #define DEBUG 0 #if DEBUG @@ -1723,7 +1726,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i return 0; } - max_sector = mddev->size << 1; + max_sector = mddev->dev_sectors; if (sector_nr >= max_sector) { /* If we aborted, we need to abort the * sync on the 'current' bitmap chunk (there will @@ -1919,6 +1922,14 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i return nr_sectors; } +static sector_t raid1_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + if (sectors) + return sectors; + + return mddev->dev_sectors; +} + static int run(mddev_t *mddev) { conf_t *conf; @@ -2048,7 +2059,7 @@ static int run(mddev_t *mddev) /* * Ok, everything is just fine now */ - mddev->array_sectors = mddev->size * 2; + md_set_array_sectors(mddev, raid1_size(mddev, 0, 0)); mddev->queue->unplug_fn = raid1_unplug; mddev->queue->backing_dev_info.congested_fn = raid1_congested; @@ -2089,6 +2100,9 @@ static int stop(mddev_t *mddev) /* need to kick something here to make sure I/O goes? */ } + raise_barrier(conf); + lower_barrier(conf); + md_unregister_thread(mddev->thread); mddev->thread = NULL; blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/ @@ -2110,15 +2124,17 @@ static int raid1_resize(mddev_t *mddev, sector_t sectors) * any io in the removed space completes, but it hardly seems * worth it. */ - mddev->array_sectors = sectors; + md_set_array_sectors(mddev, raid1_size(mddev, sectors, 0)); + if (mddev->array_sectors > raid1_size(mddev, sectors, 0)) + return -EINVAL; set_capacity(mddev->gendisk, mddev->array_sectors); mddev->changed = 1; - if (mddev->array_sectors / 2 > mddev->size && + if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) { - mddev->recovery_cp = mddev->size << 1; + mddev->recovery_cp = mddev->dev_sectors; set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); } - mddev->size = mddev->array_sectors / 2; + mddev->dev_sectors = sectors; mddev->resync_max_sectors = sectors; return 0; } @@ -2264,6 +2280,7 @@ static struct mdk_personality raid1_personality = .spare_active = raid1_spare_active, .sync_request = sync_request, .resize = raid1_resize, + .size = raid1_size, .check_reshape = raid1_reshape, .quiesce = raid1_quiesce, }; diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h new file mode 100644 index 000000000000..1620eea3d57c --- /dev/null +++ b/drivers/md/raid1.h @@ -0,0 +1,132 @@ +#ifndef _RAID1_H +#define _RAID1_H + +typedef struct mirror_info mirror_info_t; + +struct mirror_info { + mdk_rdev_t *rdev; + sector_t head_position; +}; + +/* + * memory pools need a pointer to the mddev, so they can force an unplug + * when memory is tight, and a count of the number of drives that the + * pool was allocated for, so they know how much to allocate and free. + * mddev->raid_disks cannot be used, as it can change while a pool is active + * These two datums are stored in a kmalloced struct. + */ + +struct pool_info { + mddev_t *mddev; + int raid_disks; +}; + + +typedef struct r1bio_s r1bio_t; + +struct r1_private_data_s { + mddev_t *mddev; + mirror_info_t *mirrors; + int raid_disks; + int last_used; + sector_t next_seq_sect; + spinlock_t device_lock; + + struct list_head retry_list; + /* queue pending writes and submit them on unplug */ + struct bio_list pending_bio_list; + /* queue of writes that have been unplugged */ + struct bio_list flushing_bio_list; + + /* for use when syncing mirrors: */ + + spinlock_t resync_lock; + int nr_pending; + int nr_waiting; + int nr_queued; + int barrier; + sector_t next_resync; + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + + wait_queue_head_t wait_barrier; + + struct pool_info *poolinfo; + + struct page *tmppage; + + mempool_t *r1bio_pool; + mempool_t *r1buf_pool; +}; + +typedef struct r1_private_data_s conf_t; + +/* + * this is the only point in the RAID code where we violate + * C type safety. mddev->private is an 'opaque' pointer. + */ +#define mddev_to_conf(mddev) ((conf_t *) mddev->private) + +/* + * this is our 'private' RAID1 bio. + * + * it contains information about what kind of IO operations were started + * for this RAID1 operation, and about their status: + */ + +struct r1bio_s { + atomic_t remaining; /* 'have we finished' count, + * used from IRQ handlers + */ + atomic_t behind_remaining; /* number of write-behind ios remaining + * in this BehindIO request + */ + sector_t sector; + int sectors; + unsigned long state; + mddev_t *mddev; + /* + * original bio going to /dev/mdx + */ + struct bio *master_bio; + /* + * if the IO is in READ direction, then this is where we read + */ + int read_disk; + + struct list_head retry_list; + struct bitmap_update *bitmap_update; + /* + * if the IO is in WRITE direction, then multiple bios are used. + * We choose the number when they are allocated. + */ + struct bio *bios[0]; + /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/ +}; + +/* when we get a read error on a read-only array, we redirect to another + * device without failing the first device, or trying to over-write to + * correct the read error. To keep track of bad blocks on a per-bio + * level, we store IO_BLOCKED in the appropriate 'bios' pointer + */ +#define IO_BLOCKED ((struct bio*)1) + +/* bits for r1bio.state */ +#define R1BIO_Uptodate 0 +#define R1BIO_IsSync 1 +#define R1BIO_Degraded 2 +#define R1BIO_BehindIO 3 +#define R1BIO_Barrier 4 +#define R1BIO_BarrierRetry 5 +/* For write-behind requests, we call bi_end_io when + * the last non-write-behind device completes, providing + * any write was successful. Otherwise we call when + * any write-behind write succeeds, otherwise we call + * with failure when last write completes (and all failed). + * Record that bi_end_io was called with this flag... + */ +#define R1BIO_Returned 6 + +#endif diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 7301631abe04..e293d92641ac 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -18,10 +18,13 @@ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include "dm-bio-list.h" #include <linux/delay.h> -#include <linux/raid/raid10.h> -#include <linux/raid/bitmap.h> +#include <linux/blkdev.h> +#include <linux/seq_file.h> +#include "md.h" +#include "dm-bio-list.h" +#include "raid10.h" +#include "bitmap.h" /* * RAID10 provides a combination of RAID0 and RAID1 functionality. @@ -1695,7 +1698,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i return 0; skipped: - max_sector = mddev->size << 1; + max_sector = mddev->dev_sectors; if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) max_sector = mddev->resync_max_sectors; if (sector_nr >= max_sector) { @@ -2020,6 +2023,25 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i goto skipped; } +static sector_t +raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + sector_t size; + conf_t *conf = mddev_to_conf(mddev); + + if (!raid_disks) + raid_disks = mddev->raid_disks; + if (!sectors) + sectors = mddev->dev_sectors; + + size = sectors >> conf->chunk_shift; + sector_div(size, conf->far_copies); + size = size * raid_disks; + sector_div(size, conf->near_copies); + + return size << conf->chunk_shift; +} + static int run(mddev_t *mddev) { conf_t *conf; @@ -2076,7 +2098,7 @@ static int run(mddev_t *mddev) conf->far_offset = fo; conf->chunk_mask = (sector_t)(mddev->chunk_size>>9)-1; conf->chunk_shift = ffz(~mddev->chunk_size) - 9; - size = mddev->size >> (conf->chunk_shift-1); + size = mddev->dev_sectors >> conf->chunk_shift; sector_div(size, fc); size = size * conf->raid_disks; sector_div(size, nc); @@ -2089,7 +2111,7 @@ static int run(mddev_t *mddev) */ stride += conf->raid_disks - 1; sector_div(stride, conf->raid_disks); - mddev->size = stride << (conf->chunk_shift-1); + mddev->dev_sectors = stride << conf->chunk_shift; if (fo) stride = 1; @@ -2171,8 +2193,8 @@ static int run(mddev_t *mddev) /* * Ok, everything is just fine now */ - mddev->array_sectors = size << conf->chunk_shift; - mddev->resync_max_sectors = size << conf->chunk_shift; + md_set_array_sectors(mddev, raid10_size(mddev, 0, 0)); + mddev->resync_max_sectors = raid10_size(mddev, 0, 0); mddev->queue->unplug_fn = raid10_unplug; mddev->queue->backing_dev_info.congested_fn = raid10_congested; @@ -2208,6 +2230,9 @@ static int stop(mddev_t *mddev) { conf_t *conf = mddev_to_conf(mddev); + raise_barrier(conf, 0); + lower_barrier(conf); + md_unregister_thread(mddev->thread); mddev->thread = NULL; blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/ @@ -2255,6 +2280,7 @@ static struct mdk_personality raid10_personality = .spare_active = raid10_spare_active, .sync_request = sync_request, .quiesce = raid10_quiesce, + .size = raid10_size, }; static int __init raid_init(void) diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h new file mode 100644 index 000000000000..244dbe507a54 --- /dev/null +++ b/drivers/md/raid10.h @@ -0,0 +1,121 @@ +#ifndef _RAID10_H +#define _RAID10_H + +typedef struct mirror_info mirror_info_t; + +struct mirror_info { + mdk_rdev_t *rdev; + sector_t head_position; +}; + +typedef struct r10bio_s r10bio_t; + +struct r10_private_data_s { + mddev_t *mddev; + mirror_info_t *mirrors; + int raid_disks; + spinlock_t device_lock; + + /* geometry */ + int near_copies; /* number of copies layed out raid0 style */ + int far_copies; /* number of copies layed out + * at large strides across drives + */ + int far_offset; /* far_copies are offset by 1 stripe + * instead of many + */ + int copies; /* near_copies * far_copies. + * must be <= raid_disks + */ + sector_t stride; /* distance between far copies. + * This is size / far_copies unless + * far_offset, in which case it is + * 1 stripe. + */ + + int chunk_shift; /* shift from chunks to sectors */ + sector_t chunk_mask; + + struct list_head retry_list; + /* queue pending writes and submit them on unplug */ + struct bio_list pending_bio_list; + + + spinlock_t resync_lock; + int nr_pending; + int nr_waiting; + int nr_queued; + int barrier; + sector_t next_resync; + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + + wait_queue_head_t wait_barrier; + + mempool_t *r10bio_pool; + mempool_t *r10buf_pool; + struct page *tmppage; +}; + +typedef struct r10_private_data_s conf_t; + +/* + * this is the only point in the RAID code where we violate + * C type safety. mddev->private is an 'opaque' pointer. + */ +#define mddev_to_conf(mddev) ((conf_t *) mddev->private) + +/* + * this is our 'private' RAID10 bio. + * + * it contains information about what kind of IO operations were started + * for this RAID10 operation, and about their status: + */ + +struct r10bio_s { + atomic_t remaining; /* 'have we finished' count, + * used from IRQ handlers + */ + sector_t sector; /* virtual sector number */ + int sectors; + unsigned long state; + mddev_t *mddev; + /* + * original bio going to /dev/mdx + */ + struct bio *master_bio; + /* + * if the IO is in READ direction, then this is where we read + */ + int read_slot; + + struct list_head retry_list; + /* + * if the IO is in WRITE direction, then multiple bios are used, + * one for each copy. + * When resyncing we also use one for each copy. + * When reconstructing, we use 2 bios, one for read, one for write. + * We choose the number when they are allocated. + */ + struct { + struct bio *bio; + sector_t addr; + int devnum; + } devs[0]; +}; + +/* when we get a read error on a read-only array, we redirect to another + * device without failing the first device, or trying to over-write to + * correct the read error. To keep track of bad blocks on a per-bio + * level, we store IO_BLOCKED in the appropriate 'bios' pointer + */ +#define IO_BLOCKED ((struct bio*)1) + +/* bits for r10bio.state */ +#define R10BIO_Uptodate 0 +#define R10BIO_IsSync 1 +#define R10BIO_IsRecover 2 +#define R10BIO_Degraded 3 +#endif diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index a5ba080d303b..3bbc6d647044 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -43,11 +43,14 @@ * miss any bits. */ +#include <linux/blkdev.h> #include <linux/kthread.h> -#include "raid6.h" - -#include <linux/raid/bitmap.h> +#include <linux/raid/pq.h> #include <linux/async_tx.h> +#include <linux/seq_file.h> +#include "md.h" +#include "raid5.h" +#include "bitmap.h" /* * Stripe cache @@ -91,11 +94,6 @@ #define printk_rl(args...) ((void) (printk_ratelimit() && printk(args))) -#if !RAID6_USE_EMPTY_ZERO_PAGE -/* In .bss so it's zeroed */ -const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); -#endif - /* * We maintain a biased count of active stripes in the bottom 16 bits of * bi_phys_segments, and a count of processed stripes in the upper 16 bits @@ -130,12 +128,42 @@ static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt) bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16); } +/* Find first data disk in a raid6 stripe */ +static inline int raid6_d0(struct stripe_head *sh) +{ + if (sh->ddf_layout) + /* ddf always start from first device */ + return 0; + /* md starts just after Q block */ + if (sh->qd_idx == sh->disks - 1) + return 0; + else + return sh->qd_idx + 1; +} static inline int raid6_next_disk(int disk, int raid_disks) { disk++; return (disk < raid_disks) ? disk : 0; } +/* When walking through the disks in a raid5, starting at raid6_d0, + * We need to map each disk to a 'slot', where the data disks are slot + * 0 .. raid_disks-3, the parity disk is raid_disks-2 and the Q disk + * is raid_disks-1. This help does that mapping. + */ +static int raid6_idx_to_slot(int idx, struct stripe_head *sh, + int *count, int syndrome_disks) +{ + int slot; + + if (idx == sh->pd_idx) + return syndrome_disks; + if (idx == sh->qd_idx) + return syndrome_disks + 1; + slot = (*count)++; + return slot; +} + static void return_io(struct bio *return_bi) { struct bio *bi = return_bi; @@ -193,6 +221,7 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) } } } + static void release_stripe(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; @@ -270,9 +299,11 @@ static int grow_buffers(struct stripe_head *sh, int num) return 0; } -static void raid5_build_block(struct stripe_head *sh, int i); +static void raid5_build_block(struct stripe_head *sh, int i, int previous); +static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous, + struct stripe_head *sh); -static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int disks) +static void init_stripe(struct stripe_head *sh, sector_t sector, int previous) { raid5_conf_t *conf = sh->raid_conf; int i; @@ -287,11 +318,12 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int remove_hash(sh); + sh->generation = conf->generation - previous; + sh->disks = previous ? conf->previous_raid_disks : conf->raid_disks; sh->sector = sector; - sh->pd_idx = pd_idx; + stripe_set_idx(sector, conf, previous, sh); sh->state = 0; - sh->disks = disks; for (i = sh->disks; i--; ) { struct r5dev *dev = &sh->dev[i]; @@ -305,12 +337,13 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int BUG(); } dev->flags = 0; - raid5_build_block(sh, i); + raid5_build_block(sh, i, previous); } insert_hash(conf, sh); } -static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, int disks) +static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, + short generation) { struct stripe_head *sh; struct hlist_node *hn; @@ -318,7 +351,7 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, in CHECK_DEVLOCK(); pr_debug("__find_stripe, sector %llu\n", (unsigned long long)sector); hlist_for_each_entry(sh, hn, stripe_hash(conf, sector), hash) - if (sh->sector == sector && sh->disks == disks) + if (sh->sector == sector && sh->generation == generation) return sh; pr_debug("__stripe %llu not in cache\n", (unsigned long long)sector); return NULL; @@ -327,8 +360,9 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, in static void unplug_slaves(mddev_t *mddev); static void raid5_unplug_device(struct request_queue *q); -static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector, int disks, - int pd_idx, int noblock) +static struct stripe_head * +get_active_stripe(raid5_conf_t *conf, sector_t sector, + int previous, int noblock) { struct stripe_head *sh; @@ -340,7 +374,7 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector wait_event_lock_irq(conf->wait_for_stripe, conf->quiesce == 0, conf->device_lock, /* nothing */); - sh = __find_stripe(conf, sector, disks); + sh = __find_stripe(conf, sector, conf->generation - previous); if (!sh) { if (!conf->inactive_blocked) sh = get_free_stripe(conf); @@ -358,10 +392,11 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector ); conf->inactive_blocked = 0; } else - init_stripe(sh, sector, pd_idx, disks); + init_stripe(sh, sector, previous); } else { if (atomic_read(&sh->count)) { - BUG_ON(!list_empty(&sh->lru)); + BUG_ON(!list_empty(&sh->lru) + && !test_bit(STRIPE_EXPANDING, &sh->state)); } else { if (!test_bit(STRIPE_HANDLE, &sh->state)) atomic_inc(&conf->active_stripes); @@ -895,8 +930,10 @@ static int grow_stripes(raid5_conf_t *conf, int num) struct kmem_cache *sc; int devs = conf->raid_disks; - sprintf(conf->cache_name[0], "raid5-%s", mdname(conf->mddev)); - sprintf(conf->cache_name[1], "raid5-%s-alt", mdname(conf->mddev)); + sprintf(conf->cache_name[0], + "raid%d-%s", conf->level, mdname(conf->mddev)); + sprintf(conf->cache_name[1], + "raid%d-%s-alt", conf->level, mdname(conf->mddev)); conf->active_name = 0; sc = kmem_cache_create(conf->cache_name[conf->active_name], sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev), @@ -911,7 +948,6 @@ static int grow_stripes(raid5_conf_t *conf, int num) return 0; } -#ifdef CONFIG_MD_RAID5_RESHAPE static int resize_stripes(raid5_conf_t *conf, int newsize) { /* Make all the stripes able to hold 'newsize' devices. @@ -1036,7 +1072,6 @@ static int resize_stripes(raid5_conf_t *conf, int newsize) conf->pool_size = newsize; return err; } -#endif static int drop_one_stripe(raid5_conf_t *conf) { @@ -1066,7 +1101,7 @@ static void shrink_stripes(raid5_conf_t *conf) static void raid5_end_read_request(struct bio * bi, int error) { - struct stripe_head *sh = bi->bi_private; + struct stripe_head *sh = bi->bi_private; raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags); @@ -1148,7 +1183,7 @@ static void raid5_end_read_request(struct bio * bi, int error) static void raid5_end_write_request(struct bio *bi, int error) { - struct stripe_head *sh = bi->bi_private; + struct stripe_head *sh = bi->bi_private; raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags); @@ -1176,9 +1211,9 @@ static void raid5_end_write_request(struct bio *bi, int error) } -static sector_t compute_blocknr(struct stripe_head *sh, int i); +static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous); -static void raid5_build_block(struct stripe_head *sh, int i) +static void raid5_build_block(struct stripe_head *sh, int i, int previous) { struct r5dev *dev = &sh->dev[i]; @@ -1194,7 +1229,7 @@ static void raid5_build_block(struct stripe_head *sh, int i) dev->req.bi_private = sh; dev->flags = 0; - dev->sector = compute_blocknr(sh, i); + dev->sector = compute_blocknr(sh, i, previous); } static void error(mddev_t *mddev, mdk_rdev_t *rdev) @@ -1227,15 +1262,23 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) * Input: a 'big' sector number, * Output: index of the data and parity disk, and the sector # in them. */ -static sector_t raid5_compute_sector(sector_t r_sector, unsigned int raid_disks, - unsigned int data_disks, unsigned int * dd_idx, - unsigned int * pd_idx, raid5_conf_t *conf) +static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector, + int previous, int *dd_idx, + struct stripe_head *sh) { long stripe; unsigned long chunk_number; unsigned int chunk_offset; + int pd_idx, qd_idx; + int ddf_layout = 0; sector_t new_sector; - int sectors_per_chunk = conf->chunk_size >> 9; + int algorithm = previous ? conf->prev_algo + : conf->algorithm; + int sectors_per_chunk = previous ? (conf->prev_chunk >> 9) + : (conf->chunk_size >> 9); + int raid_disks = previous ? conf->previous_raid_disks + : conf->raid_disks; + int data_disks = raid_disks - conf->max_degraded; /* First compute the information on this sector */ @@ -1259,68 +1302,170 @@ static sector_t raid5_compute_sector(sector_t r_sector, unsigned int raid_disks, /* * Select the parity disk based on the user selected algorithm. */ + pd_idx = qd_idx = ~0; switch(conf->level) { case 4: - *pd_idx = data_disks; + pd_idx = data_disks; break; case 5: - switch (conf->algorithm) { + switch (algorithm) { case ALGORITHM_LEFT_ASYMMETRIC: - *pd_idx = data_disks - stripe % raid_disks; - if (*dd_idx >= *pd_idx) + pd_idx = data_disks - stripe % raid_disks; + if (*dd_idx >= pd_idx) (*dd_idx)++; break; case ALGORITHM_RIGHT_ASYMMETRIC: - *pd_idx = stripe % raid_disks; - if (*dd_idx >= *pd_idx) + pd_idx = stripe % raid_disks; + if (*dd_idx >= pd_idx) (*dd_idx)++; break; case ALGORITHM_LEFT_SYMMETRIC: - *pd_idx = data_disks - stripe % raid_disks; - *dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks; + pd_idx = data_disks - stripe % raid_disks; + *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks; break; case ALGORITHM_RIGHT_SYMMETRIC: - *pd_idx = stripe % raid_disks; - *dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks; + pd_idx = stripe % raid_disks; + *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks; + break; + case ALGORITHM_PARITY_0: + pd_idx = 0; + (*dd_idx)++; + break; + case ALGORITHM_PARITY_N: + pd_idx = data_disks; break; default: printk(KERN_ERR "raid5: unsupported algorithm %d\n", - conf->algorithm); + algorithm); + BUG(); } break; case 6: - /**** FIX THIS ****/ - switch (conf->algorithm) { + switch (algorithm) { case ALGORITHM_LEFT_ASYMMETRIC: - *pd_idx = raid_disks - 1 - (stripe % raid_disks); - if (*pd_idx == raid_disks-1) - (*dd_idx)++; /* Q D D D P */ - else if (*dd_idx >= *pd_idx) + pd_idx = raid_disks - 1 - (stripe % raid_disks); + qd_idx = pd_idx + 1; + if (pd_idx == raid_disks-1) { + (*dd_idx)++; /* Q D D D P */ + qd_idx = 0; + } else if (*dd_idx >= pd_idx) (*dd_idx) += 2; /* D D P Q D */ break; case ALGORITHM_RIGHT_ASYMMETRIC: - *pd_idx = stripe % raid_disks; - if (*pd_idx == raid_disks-1) - (*dd_idx)++; /* Q D D D P */ - else if (*dd_idx >= *pd_idx) + pd_idx = stripe % raid_disks; + qd_idx = pd_idx + 1; + if (pd_idx == raid_disks-1) { + (*dd_idx)++; /* Q D D D P */ + qd_idx = 0; + } else if (*dd_idx >= pd_idx) (*dd_idx) += 2; /* D D P Q D */ break; case ALGORITHM_LEFT_SYMMETRIC: - *pd_idx = raid_disks - 1 - (stripe % raid_disks); - *dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks; + pd_idx = raid_disks - 1 - (stripe % raid_disks); + qd_idx = (pd_idx + 1) % raid_disks; + *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks; break; case ALGORITHM_RIGHT_SYMMETRIC: - *pd_idx = stripe % raid_disks; - *dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks; + pd_idx = stripe % raid_disks; + qd_idx = (pd_idx + 1) % raid_disks; + *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks; + break; + + case ALGORITHM_PARITY_0: + pd_idx = 0; + qd_idx = 1; + (*dd_idx) += 2; + break; + case ALGORITHM_PARITY_N: + pd_idx = data_disks; + qd_idx = data_disks + 1; break; + + case ALGORITHM_ROTATING_ZERO_RESTART: + /* Exactly the same as RIGHT_ASYMMETRIC, but or + * of blocks for computing Q is different. + */ + pd_idx = stripe % raid_disks; + qd_idx = pd_idx + 1; + if (pd_idx == raid_disks-1) { + (*dd_idx)++; /* Q D D D P */ + qd_idx = 0; + } else if (*dd_idx >= pd_idx) + (*dd_idx) += 2; /* D D P Q D */ + ddf_layout = 1; + break; + + case ALGORITHM_ROTATING_N_RESTART: + /* Same a left_asymmetric, by first stripe is + * D D D P Q rather than + * Q D D D P + */ + pd_idx = raid_disks - 1 - ((stripe + 1) % raid_disks); + qd_idx = pd_idx + 1; + if (pd_idx == raid_disks-1) { + (*dd_idx)++; /* Q D D D P */ + qd_idx = 0; + } else if (*dd_idx >= pd_idx) + (*dd_idx) += 2; /* D D P Q D */ + ddf_layout = 1; + break; + + case ALGORITHM_ROTATING_N_CONTINUE: + /* Same as left_symmetric but Q is before P */ + pd_idx = raid_disks - 1 - (stripe % raid_disks); + qd_idx = (pd_idx + raid_disks - 1) % raid_disks; + *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks; + ddf_layout = 1; + break; + + case ALGORITHM_LEFT_ASYMMETRIC_6: + /* RAID5 left_asymmetric, with Q on last device */ + pd_idx = data_disks - stripe % (raid_disks-1); + if (*dd_idx >= pd_idx) + (*dd_idx)++; + qd_idx = raid_disks - 1; + break; + + case ALGORITHM_RIGHT_ASYMMETRIC_6: + pd_idx = stripe % (raid_disks-1); + if (*dd_idx >= pd_idx) + (*dd_idx)++; + qd_idx = raid_disks - 1; + break; + + case ALGORITHM_LEFT_SYMMETRIC_6: + pd_idx = data_disks - stripe % (raid_disks-1); + *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1); + qd_idx = raid_disks - 1; + break; + + case ALGORITHM_RIGHT_SYMMETRIC_6: + pd_idx = stripe % (raid_disks-1); + *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1); + qd_idx = raid_disks - 1; + break; + + case ALGORITHM_PARITY_0_6: + pd_idx = 0; + (*dd_idx)++; + qd_idx = raid_disks - 1; + break; + + default: printk(KERN_CRIT "raid6: unsupported algorithm %d\n", - conf->algorithm); + algorithm); + BUG(); } break; } + if (sh) { + sh->pd_idx = pd_idx; + sh->qd_idx = qd_idx; + sh->ddf_layout = ddf_layout; + } /* * Finally, compute the new sector number */ @@ -1329,17 +1474,21 @@ static sector_t raid5_compute_sector(sector_t r_sector, unsigned int raid_disks, } -static sector_t compute_blocknr(struct stripe_head *sh, int i) +static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous) { raid5_conf_t *conf = sh->raid_conf; int raid_disks = sh->disks; int data_disks = raid_disks - conf->max_degraded; sector_t new_sector = sh->sector, check; - int sectors_per_chunk = conf->chunk_size >> 9; + int sectors_per_chunk = previous ? (conf->prev_chunk >> 9) + : (conf->chunk_size >> 9); + int algorithm = previous ? conf->prev_algo + : conf->algorithm; sector_t stripe; int chunk_offset; - int chunk_number, dummy1, dummy2, dd_idx = i; + int chunk_number, dummy1, dd_idx = i; sector_t r_sector; + struct stripe_head sh2; chunk_offset = sector_div(new_sector, sectors_per_chunk); @@ -1351,7 +1500,7 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i) switch(conf->level) { case 4: break; case 5: - switch (conf->algorithm) { + switch (algorithm) { case ALGORITHM_LEFT_ASYMMETRIC: case ALGORITHM_RIGHT_ASYMMETRIC: if (i > sh->pd_idx) @@ -1363,19 +1512,27 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i) i += raid_disks; i -= (sh->pd_idx + 1); break; + case ALGORITHM_PARITY_0: + i -= 1; + break; + case ALGORITHM_PARITY_N: + break; default: printk(KERN_ERR "raid5: unsupported algorithm %d\n", - conf->algorithm); + algorithm); + BUG(); } break; case 6: - if (i == raid6_next_disk(sh->pd_idx, raid_disks)) + if (i == sh->qd_idx) return 0; /* It is the Q disk */ - switch (conf->algorithm) { + switch (algorithm) { case ALGORITHM_LEFT_ASYMMETRIC: case ALGORITHM_RIGHT_ASYMMETRIC: - if (sh->pd_idx == raid_disks-1) - i--; /* Q D D D P */ + case ALGORITHM_ROTATING_ZERO_RESTART: + case ALGORITHM_ROTATING_N_RESTART: + if (sh->pd_idx == raid_disks-1) + i--; /* Q D D D P */ else if (i > sh->pd_idx) i -= 2; /* D D P Q D */ break; @@ -1390,9 +1547,35 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i) i -= (sh->pd_idx + 2); } break; + case ALGORITHM_PARITY_0: + i -= 2; + break; + case ALGORITHM_PARITY_N: + break; + case ALGORITHM_ROTATING_N_CONTINUE: + if (sh->pd_idx == 0) + i--; /* P D D D Q */ + else if (i > sh->pd_idx) + i -= 2; /* D D Q P D */ + break; + case ALGORITHM_LEFT_ASYMMETRIC_6: + case ALGORITHM_RIGHT_ASYMMETRIC_6: + if (i > sh->pd_idx) + i--; + break; + case ALGORITHM_LEFT_SYMMETRIC_6: + case ALGORITHM_RIGHT_SYMMETRIC_6: + if (i < sh->pd_idx) + i += data_disks + 1; + i -= (sh->pd_idx + 1); + break; + case ALGORITHM_PARITY_0_6: + i -= 1; + break; default: printk(KERN_CRIT "raid6: unsupported algorithm %d\n", - conf->algorithm); + algorithm); + BUG(); } break; } @@ -1400,8 +1583,10 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i) chunk_number = stripe * data_disks + i; r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset; - check = raid5_compute_sector(r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf); - if (check != sh->sector || dummy1 != dd_idx || dummy2 != sh->pd_idx) { + check = raid5_compute_sector(conf, r_sector, + previous, &dummy1, &sh2); + if (check != sh->sector || dummy1 != dd_idx || sh2.pd_idx != sh->pd_idx + || sh2.qd_idx != sh->qd_idx) { printk(KERN_ERR "compute_blocknr: map not correct\n"); return 0; } @@ -1468,14 +1653,16 @@ static void copy_data(int frombio, struct bio *bio, static void compute_parity6(struct stripe_head *sh, int method) { - raid6_conf_t *conf = sh->raid_conf; - int i, pd_idx = sh->pd_idx, qd_idx, d0_idx, disks = sh->disks, count; + raid5_conf_t *conf = sh->raid_conf; + int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count; + int syndrome_disks = sh->ddf_layout ? disks : (disks - 2); struct bio *chosen; /**** FIX THIS: This could be very bad if disks is close to 256 ****/ - void *ptrs[disks]; + void *ptrs[syndrome_disks+2]; - qd_idx = raid6_next_disk(pd_idx, disks); - d0_idx = raid6_next_disk(qd_idx, disks); + pd_idx = sh->pd_idx; + qd_idx = sh->qd_idx; + d0_idx = raid6_d0(sh); pr_debug("compute_parity, stripe %llu, method %d\n", (unsigned long long)sh->sector, method); @@ -1513,24 +1700,29 @@ static void compute_parity6(struct stripe_head *sh, int method) set_bit(R5_UPTODATE, &sh->dev[i].flags); } -// switch(method) { -// case RECONSTRUCT_WRITE: -// case CHECK_PARITY: -// case UPDATE_PARITY: - /* Note that unlike RAID-5, the ordering of the disks matters greatly. */ - /* FIX: Is this ordering of drives even remotely optimal? */ - count = 0; - i = d0_idx; - do { - ptrs[count++] = page_address(sh->dev[i].page); - if (count <= disks-2 && !test_bit(R5_UPTODATE, &sh->dev[i].flags)) - printk("block %d/%d not uptodate on parity calc\n", i,count); - i = raid6_next_disk(i, disks); - } while ( i != d0_idx ); -// break; -// } - - raid6_call.gen_syndrome(disks, STRIPE_SIZE, ptrs); + /* Note that unlike RAID-5, the ordering of the disks matters greatly.*/ + + for (i = 0; i < disks; i++) + ptrs[i] = (void *)raid6_empty_zero_page; + + count = 0; + i = d0_idx; + do { + int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks); + + ptrs[slot] = page_address(sh->dev[i].page); + if (slot < syndrome_disks && + !test_bit(R5_UPTODATE, &sh->dev[i].flags)) { + printk(KERN_ERR "block %d/%d not uptodate " + "on parity calc\n", i, count); + BUG(); + } + + i = raid6_next_disk(i, disks); + } while (i != d0_idx); + BUG_ON(count != syndrome_disks); + + raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs); switch(method) { case RECONSTRUCT_WRITE: @@ -1552,8 +1744,7 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero) { int i, count, disks = sh->disks; void *ptr[MAX_XOR_BLOCKS], *dest, *p; - int pd_idx = sh->pd_idx; - int qd_idx = raid6_next_disk(pd_idx, disks); + int qd_idx = sh->qd_idx; pr_debug("compute_block_1, stripe %llu, idx %d\n", (unsigned long long)sh->sector, dd_idx); @@ -1589,63 +1780,65 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero) static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2) { int i, count, disks = sh->disks; - int pd_idx = sh->pd_idx; - int qd_idx = raid6_next_disk(pd_idx, disks); - int d0_idx = raid6_next_disk(qd_idx, disks); - int faila, failb; + int syndrome_disks = sh->ddf_layout ? disks : disks-2; + int d0_idx = raid6_d0(sh); + int faila = -1, failb = -1; + /**** FIX THIS: This could be very bad if disks is close to 256 ****/ + void *ptrs[syndrome_disks+2]; - /* faila and failb are disk numbers relative to d0_idx */ - /* pd_idx become disks-2 and qd_idx become disks-1 */ - faila = (dd_idx1 < d0_idx) ? dd_idx1+(disks-d0_idx) : dd_idx1-d0_idx; - failb = (dd_idx2 < d0_idx) ? dd_idx2+(disks-d0_idx) : dd_idx2-d0_idx; + for (i = 0; i < disks ; i++) + ptrs[i] = (void *)raid6_empty_zero_page; + count = 0; + i = d0_idx; + do { + int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks); + + ptrs[slot] = page_address(sh->dev[i].page); + + if (i == dd_idx1) + faila = slot; + if (i == dd_idx2) + failb = slot; + i = raid6_next_disk(i, disks); + } while (i != d0_idx); + BUG_ON(count != syndrome_disks); BUG_ON(faila == failb); if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; } pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n", - (unsigned long long)sh->sector, dd_idx1, dd_idx2, faila, failb); + (unsigned long long)sh->sector, dd_idx1, dd_idx2, + faila, failb); - if ( failb == disks-1 ) { + if (failb == syndrome_disks+1) { /* Q disk is one of the missing disks */ - if ( faila == disks-2 ) { + if (faila == syndrome_disks) { /* Missing P+Q, just recompute */ compute_parity6(sh, UPDATE_PARITY); return; } else { /* We're missing D+Q; recompute D from P */ - compute_block_1(sh, (dd_idx1 == qd_idx) ? dd_idx2 : dd_idx1, 0); + compute_block_1(sh, ((dd_idx1 == sh->qd_idx) ? + dd_idx2 : dd_idx1), + 0); compute_parity6(sh, UPDATE_PARITY); /* Is this necessary? */ return; } } - /* We're missing D+P or D+D; build pointer table */ - { - /**** FIX THIS: This could be very bad if disks is close to 256 ****/ - void *ptrs[disks]; - - count = 0; - i = d0_idx; - do { - ptrs[count++] = page_address(sh->dev[i].page); - i = raid6_next_disk(i, disks); - if (i != dd_idx1 && i != dd_idx2 && - !test_bit(R5_UPTODATE, &sh->dev[i].flags)) - printk("compute_2 with missing block %d/%d\n", count, i); - } while ( i != d0_idx ); - - if ( failb == disks-2 ) { - /* We're missing D+P. */ - raid6_datap_recov(disks, STRIPE_SIZE, faila, ptrs); - } else { - /* We're missing D+D. */ - raid6_2data_recov(disks, STRIPE_SIZE, faila, failb, ptrs); - } - - /* Both the above update both missing blocks */ - set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags); - set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags); + /* We're missing D+P or D+D; */ + if (failb == syndrome_disks) { + /* We're missing D+P. */ + raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs); + } else { + /* We're missing D+D. */ + raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb, + ptrs); } + + /* Both the above update both missing blocks */ + set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags); + set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags); } static void @@ -1800,17 +1993,21 @@ static int page_is_zero(struct page *p) memcmp(a, a+4, STRIPE_SIZE-4)==0); } -static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) +static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous, + struct stripe_head *sh) { - int sectors_per_chunk = conf->chunk_size >> 9; - int pd_idx, dd_idx; + int sectors_per_chunk = + previous ? (conf->prev_chunk >> 9) + : (conf->chunk_size >> 9); + int dd_idx; int chunk_offset = sector_div(stripe, sectors_per_chunk); + int disks = previous ? conf->previous_raid_disks : conf->raid_disks; - raid5_compute_sector(stripe * (disks - conf->max_degraded) + raid5_compute_sector(conf, + stripe * (disks - conf->max_degraded) *sectors_per_chunk + chunk_offset, - disks, disks - conf->max_degraded, - &dd_idx, &pd_idx, conf); - return pd_idx; + previous, + &dd_idx, sh); } static void @@ -2181,7 +2378,7 @@ static void handle_stripe_dirtying6(raid5_conf_t *conf, struct r6_state *r6s, int disks) { int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i; - int qd_idx = r6s->qd_idx; + int qd_idx = sh->qd_idx; for (i = disks; i--; ) { struct r5dev *dev = &sh->dev[i]; /* Would I have to read this buffer for reconstruct_write */ @@ -2371,7 +2568,7 @@ static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh, int update_p = 0, update_q = 0; struct r5dev *dev; int pd_idx = sh->pd_idx; - int qd_idx = r6s->qd_idx; + int qd_idx = sh->qd_idx; set_bit(STRIPE_HANDLE, &sh->state); @@ -2467,17 +2664,14 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, struct dma_async_tx_descriptor *tx = NULL; clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); for (i = 0; i < sh->disks; i++) - if (i != sh->pd_idx && (!r6s || i != r6s->qd_idx)) { - int dd_idx, pd_idx, j; + if (i != sh->pd_idx && i != sh->qd_idx) { + int dd_idx, j; struct stripe_head *sh2; - sector_t bn = compute_blocknr(sh, i); - sector_t s = raid5_compute_sector(bn, conf->raid_disks, - conf->raid_disks - - conf->max_degraded, &dd_idx, - &pd_idx, conf); - sh2 = get_active_stripe(conf, s, conf->raid_disks, - pd_idx, 1); + sector_t bn = compute_blocknr(sh, i, 1); + sector_t s = raid5_compute_sector(conf, bn, 0, + &dd_idx, NULL); + sh2 = get_active_stripe(conf, s, 0, 1); if (sh2 == NULL) /* so far only the early blocks of this stripe * have been requested. When later blocks @@ -2500,8 +2694,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); for (j = 0; j < conf->raid_disks; j++) if (j != sh2->pd_idx && - (!r6s || j != raid6_next_disk(sh2->pd_idx, - sh2->disks)) && + (!r6s || j != sh2->qd_idx) && !test_bit(R5_Expanded, &sh2->dev[j].flags)) break; if (j == conf->raid_disks) { @@ -2750,6 +2943,23 @@ static bool handle_stripe5(struct stripe_head *sh) /* Finish reconstruct operations initiated by the expansion process */ if (sh->reconstruct_state == reconstruct_state_result) { + struct stripe_head *sh2 + = get_active_stripe(conf, sh->sector, 1, 1); + if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { + /* sh cannot be written until sh2 has been read. + * so arrange for sh to be delayed a little + */ + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, + &sh2->state)) + atomic_inc(&conf->preread_active_stripes); + release_stripe(sh2); + goto unlock; + } + if (sh2) + release_stripe(sh2); + sh->reconstruct_state = reconstruct_state_idle; clear_bit(STRIPE_EXPANDING, &sh->state); for (i = conf->raid_disks; i--; ) { @@ -2763,8 +2973,7 @@ static bool handle_stripe5(struct stripe_head *sh) !sh->reconstruct_state) { /* Need to write out all blocks after computing parity */ sh->disks = conf->raid_disks; - sh->pd_idx = stripe_to_pdidx(sh->sector, conf, - conf->raid_disks); + stripe_set_idx(sh->sector, conf, 0, sh); schedule_reconstruction5(sh, &s, 1, 1); } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) { clear_bit(STRIPE_EXPAND_READY, &sh->state); @@ -2796,20 +3005,19 @@ static bool handle_stripe5(struct stripe_head *sh) static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) { - raid6_conf_t *conf = sh->raid_conf; + raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks; struct bio *return_bi = NULL; - int i, pd_idx = sh->pd_idx; + int i, pd_idx = sh->pd_idx, qd_idx = sh->qd_idx; struct stripe_head_state s; struct r6_state r6s; struct r5dev *dev, *pdev, *qdev; mdk_rdev_t *blocked_rdev = NULL; - r6s.qd_idx = raid6_next_disk(pd_idx, disks); pr_debug("handling stripe %llu, state=%#lx cnt=%d, " "pd_idx=%d, qd_idx=%d\n", (unsigned long long)sh->sector, sh->state, - atomic_read(&sh->count), pd_idx, r6s.qd_idx); + atomic_read(&sh->count), pd_idx, qd_idx); memset(&s, 0, sizeof(s)); spin_lock(&sh->lock); @@ -2920,9 +3128,9 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) pdev = &sh->dev[pd_idx]; r6s.p_failed = (s.failed >= 1 && r6s.failed_num[0] == pd_idx) || (s.failed >= 2 && r6s.failed_num[1] == pd_idx); - qdev = &sh->dev[r6s.qd_idx]; - r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == r6s.qd_idx) - || (s.failed >= 2 && r6s.failed_num[1] == r6s.qd_idx); + qdev = &sh->dev[qd_idx]; + r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == qd_idx) + || (s.failed >= 2 && r6s.failed_num[1] == qd_idx); if ( s.written && ( r6s.p_failed || ((test_bit(R5_Insync, &pdev->flags) @@ -2980,10 +3188,26 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { + struct stripe_head *sh2 + = get_active_stripe(conf, sh->sector, 1, 1); + if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { + /* sh cannot be written until sh2 has been read. + * so arrange for sh to be delayed a little + */ + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, + &sh2->state)) + atomic_inc(&conf->preread_active_stripes); + release_stripe(sh2); + goto unlock; + } + if (sh2) + release_stripe(sh2); + /* Need to write out all blocks after computing P&Q */ sh->disks = conf->raid_disks; - sh->pd_idx = stripe_to_pdidx(sh->sector, conf, - conf->raid_disks); + stripe_set_idx(sh->sector, conf, 0, sh); compute_parity6(sh, RECONSTRUCT_WRITE); for (i = conf->raid_disks ; i-- ; ) { set_bit(R5_LOCKED, &sh->dev[i].flags); @@ -3134,6 +3358,8 @@ static int raid5_mergeable_bvec(struct request_queue *q, if ((bvm->bi_rw & 1) == WRITE) return biovec->bv_len; /* always allow writes to be mergeable */ + if (mddev->new_chunk < mddev->chunk_size) + chunk_sectors = mddev->new_chunk >> 9; max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9; if (max < 0) max = 0; if (max <= biovec->bv_len && bio_sectors == 0) @@ -3149,6 +3375,8 @@ static int in_chunk_boundary(mddev_t *mddev, struct bio *bio) unsigned int chunk_sectors = mddev->chunk_size >> 9; unsigned int bio_sectors = bio->bi_size >> 9; + if (mddev->new_chunk < mddev->chunk_size) + chunk_sectors = mddev->new_chunk >> 9; return chunk_sectors >= ((sector & (chunk_sectors - 1)) + bio_sectors); } @@ -3255,9 +3483,7 @@ static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio) { mddev_t *mddev = q->queuedata; raid5_conf_t *conf = mddev_to_conf(mddev); - const unsigned int raid_disks = conf->raid_disks; - const unsigned int data_disks = raid_disks - conf->max_degraded; - unsigned int dd_idx, pd_idx; + unsigned int dd_idx; struct bio* align_bi; mdk_rdev_t *rdev; @@ -3266,7 +3492,7 @@ static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio) return 0; } /* - * use bio_clone to make a copy of the bio + * use bio_clone to make a copy of the bio */ align_bi = bio_clone(raid_bio, GFP_NOIO); if (!align_bi) @@ -3280,12 +3506,9 @@ static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio) /* * compute position */ - align_bi->bi_sector = raid5_compute_sector(raid_bio->bi_sector, - raid_disks, - data_disks, - &dd_idx, - &pd_idx, - conf); + align_bi->bi_sector = raid5_compute_sector(conf, raid_bio->bi_sector, + 0, + &dd_idx, NULL); rcu_read_lock(); rdev = rcu_dereference(conf->disks[dd_idx].rdev); @@ -3377,7 +3600,7 @@ static int make_request(struct request_queue *q, struct bio * bi) { mddev_t *mddev = q->queuedata; raid5_conf_t *conf = mddev_to_conf(mddev); - unsigned int dd_idx, pd_idx; + int dd_idx; sector_t new_sector; sector_t logical_sector, last_sector; struct stripe_head *sh; @@ -3400,7 +3623,7 @@ static int make_request(struct request_queue *q, struct bio * bi) if (rw == READ && mddev->reshape_position == MaxSector && chunk_aligned_read(q,bi)) - return 0; + return 0; logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1); last_sector = bi->bi_sector + (bi->bi_size>>9); @@ -3410,26 +3633,31 @@ static int make_request(struct request_queue *q, struct bio * bi) for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) { DEFINE_WAIT(w); int disks, data_disks; + int previous; retry: + previous = 0; + disks = conf->raid_disks; prepare_to_wait(&conf->wait_for_overlap, &w, TASK_UNINTERRUPTIBLE); - if (likely(conf->expand_progress == MaxSector)) - disks = conf->raid_disks; - else { - /* spinlock is needed as expand_progress may be + if (unlikely(conf->reshape_progress != MaxSector)) { + /* spinlock is needed as reshape_progress may be * 64bit on a 32bit platform, and so it might be * possible to see a half-updated value - * Ofcourse expand_progress could change after + * Ofcourse reshape_progress could change after * the lock is dropped, so once we get a reference * to the stripe that we think it is, we will have * to check again. */ spin_lock_irq(&conf->device_lock); - disks = conf->raid_disks; - if (logical_sector >= conf->expand_progress) + if (mddev->delta_disks < 0 + ? logical_sector < conf->reshape_progress + : logical_sector >= conf->reshape_progress) { disks = conf->previous_raid_disks; - else { - if (logical_sector >= conf->expand_lo) { + previous = 1; + } else { + if (mddev->delta_disks < 0 + ? logical_sector < conf->reshape_safe + : logical_sector >= conf->reshape_safe) { spin_unlock_irq(&conf->device_lock); schedule(); goto retry; @@ -3439,15 +3667,17 @@ static int make_request(struct request_queue *q, struct bio * bi) } data_disks = disks - conf->max_degraded; - new_sector = raid5_compute_sector(logical_sector, disks, data_disks, - &dd_idx, &pd_idx, conf); + new_sector = raid5_compute_sector(conf, logical_sector, + previous, + &dd_idx, NULL); pr_debug("raid5: make_request, sector %llu logical %llu\n", (unsigned long long)new_sector, (unsigned long long)logical_sector); - sh = get_active_stripe(conf, new_sector, disks, pd_idx, (bi->bi_rw&RWA_MASK)); + sh = get_active_stripe(conf, new_sector, previous, + (bi->bi_rw&RWA_MASK)); if (sh) { - if (unlikely(conf->expand_progress != MaxSector)) { + if (unlikely(previous)) { /* expansion might have moved on while waiting for a * stripe, so we must do the range check again. * Expansion could still move past after this @@ -3458,8 +3688,9 @@ static int make_request(struct request_queue *q, struct bio * bi) */ int must_retry = 0; spin_lock_irq(&conf->device_lock); - if (logical_sector < conf->expand_progress && - disks == conf->previous_raid_disks) + if (mddev->delta_disks < 0 + ? logical_sector >= conf->reshape_progress + : logical_sector < conf->reshape_progress) /* mismatch, need to try again */ must_retry = 1; spin_unlock_irq(&conf->device_lock); @@ -3514,6 +3745,8 @@ static int make_request(struct request_queue *q, struct bio * bi) return 0; } +static sector_t raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks); + static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped) { /* reshaping is quite different to recovery/resync so it is @@ -3527,61 +3760,118 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped */ raid5_conf_t *conf = (raid5_conf_t *) mddev->private; struct stripe_head *sh; - int pd_idx; sector_t first_sector, last_sector; int raid_disks = conf->previous_raid_disks; int data_disks = raid_disks - conf->max_degraded; int new_data_disks = conf->raid_disks - conf->max_degraded; int i; int dd_idx; - sector_t writepos, safepos, gap; - - if (sector_nr == 0 && - conf->expand_progress != 0) { - /* restarting in the middle, skip the initial sectors */ - sector_nr = conf->expand_progress; + sector_t writepos, readpos, safepos; + sector_t stripe_addr; + int reshape_sectors; + struct list_head stripes; + + if (sector_nr == 0) { + /* If restarting in the middle, skip the initial sectors */ + if (mddev->delta_disks < 0 && + conf->reshape_progress < raid5_size(mddev, 0, 0)) { + sector_nr = raid5_size(mddev, 0, 0) + - conf->reshape_progress; + } else if (mddev->delta_disks > 0 && + conf->reshape_progress > 0) + sector_nr = conf->reshape_progress; sector_div(sector_nr, new_data_disks); - *skipped = 1; - return sector_nr; + if (sector_nr) { + *skipped = 1; + return sector_nr; + } } + /* We need to process a full chunk at a time. + * If old and new chunk sizes differ, we need to process the + * largest of these + */ + if (mddev->new_chunk > mddev->chunk_size) + reshape_sectors = mddev->new_chunk / 512; + else + reshape_sectors = mddev->chunk_size / 512; + /* we update the metadata when there is more than 3Meg * in the block range (that is rather arbitrary, should * probably be time based) or when the data about to be * copied would over-write the source of the data at * the front of the range. - * i.e. one new_stripe forward from expand_progress new_maps - * to after where expand_lo old_maps to + * i.e. one new_stripe along from reshape_progress new_maps + * to after where reshape_safe old_maps to */ - writepos = conf->expand_progress + - conf->chunk_size/512*(new_data_disks); + writepos = conf->reshape_progress; sector_div(writepos, new_data_disks); - safepos = conf->expand_lo; + readpos = conf->reshape_progress; + sector_div(readpos, data_disks); + safepos = conf->reshape_safe; sector_div(safepos, data_disks); - gap = conf->expand_progress - conf->expand_lo; + if (mddev->delta_disks < 0) { + writepos -= reshape_sectors; + readpos += reshape_sectors; + safepos += reshape_sectors; + } else { + writepos += reshape_sectors; + readpos -= reshape_sectors; + safepos -= reshape_sectors; + } - if (writepos >= safepos || - gap > (new_data_disks)*3000*2 /*3Meg*/) { + /* 'writepos' is the most advanced device address we might write. + * 'readpos' is the least advanced device address we might read. + * 'safepos' is the least address recorded in the metadata as having + * been reshaped. + * If 'readpos' is behind 'writepos', then there is no way that we can + * ensure safety in the face of a crash - that must be done by userspace + * making a backup of the data. So in that case there is no particular + * rush to update metadata. + * Otherwise if 'safepos' is behind 'writepos', then we really need to + * update the metadata to advance 'safepos' to match 'readpos' so that + * we can be safe in the event of a crash. + * So we insist on updating metadata if safepos is behind writepos and + * readpos is beyond writepos. + * In any case, update the metadata every 10 seconds. + * Maybe that number should be configurable, but I'm not sure it is + * worth it.... maybe it could be a multiple of safemode_delay??? + */ + if ((mddev->delta_disks < 0 + ? (safepos > writepos && readpos < writepos) + : (safepos < writepos && readpos > writepos)) || + time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) { /* Cannot proceed until we've updated the superblock... */ wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes)==0); - mddev->reshape_position = conf->expand_progress; + mddev->reshape_position = conf->reshape_progress; + conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); wait_event(mddev->sb_wait, mddev->flags == 0 || kthread_should_stop()); spin_lock_irq(&conf->device_lock); - conf->expand_lo = mddev->reshape_position; + conf->reshape_safe = mddev->reshape_position; spin_unlock_irq(&conf->device_lock); wake_up(&conf->wait_for_overlap); } - for (i=0; i < conf->chunk_size/512; i+= STRIPE_SECTORS) { + if (mddev->delta_disks < 0) { + BUG_ON(conf->reshape_progress == 0); + stripe_addr = writepos; + BUG_ON((mddev->dev_sectors & + ~((sector_t)reshape_sectors - 1)) + - reshape_sectors - stripe_addr + != sector_nr); + } else { + BUG_ON(writepos != sector_nr + reshape_sectors); + stripe_addr = sector_nr; + } + INIT_LIST_HEAD(&stripes); + for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) { int j; int skipped = 0; - pd_idx = stripe_to_pdidx(sector_nr+i, conf, conf->raid_disks); - sh = get_active_stripe(conf, sector_nr+i, - conf->raid_disks, pd_idx, 0); + sh = get_active_stripe(conf, stripe_addr+i, 0, 0); set_bit(STRIPE_EXPANDING, &sh->state); atomic_inc(&conf->reshape_stripes); /* If any of this stripe is beyond the end of the old @@ -3592,10 +3882,10 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped if (j == sh->pd_idx) continue; if (conf->level == 6 && - j == raid6_next_disk(sh->pd_idx, sh->disks)) + j == sh->qd_idx) continue; - s = compute_blocknr(sh, j); - if (s < mddev->array_sectors) { + s = compute_blocknr(sh, j, 0); + if (s < raid5_size(mddev, 0, 0)) { skipped = 1; continue; } @@ -3607,10 +3897,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped set_bit(STRIPE_EXPAND_READY, &sh->state); set_bit(STRIPE_HANDLE, &sh->state); } - release_stripe(sh); + list_add(&sh->lru, &stripes); } spin_lock_irq(&conf->device_lock); - conf->expand_progress = (sector_nr + i) * new_data_disks; + if (mddev->delta_disks < 0) + conf->reshape_progress -= reshape_sectors * new_data_disks; + else + conf->reshape_progress += reshape_sectors * new_data_disks; spin_unlock_irq(&conf->device_lock); /* Ok, those stripe are ready. We can start scheduling * reads on the source stripes. @@ -3618,46 +3911,50 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped * block on the destination stripes. */ first_sector = - raid5_compute_sector(sector_nr*(new_data_disks), - raid_disks, data_disks, - &dd_idx, &pd_idx, conf); + raid5_compute_sector(conf, stripe_addr*(new_data_disks), + 1, &dd_idx, NULL); last_sector = - raid5_compute_sector((sector_nr+conf->chunk_size/512) - *(new_data_disks) -1, - raid_disks, data_disks, - &dd_idx, &pd_idx, conf); - if (last_sector >= (mddev->size<<1)) - last_sector = (mddev->size<<1)-1; + raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512) + *(new_data_disks) - 1), + 1, &dd_idx, NULL); + if (last_sector >= mddev->dev_sectors) + last_sector = mddev->dev_sectors - 1; while (first_sector <= last_sector) { - pd_idx = stripe_to_pdidx(first_sector, conf, - conf->previous_raid_disks); - sh = get_active_stripe(conf, first_sector, - conf->previous_raid_disks, pd_idx, 0); + sh = get_active_stripe(conf, first_sector, 1, 0); set_bit(STRIPE_EXPAND_SOURCE, &sh->state); set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); first_sector += STRIPE_SECTORS; } + /* Now that the sources are clearly marked, we can release + * the destination stripes + */ + while (!list_empty(&stripes)) { + sh = list_entry(stripes.next, struct stripe_head, lru); + list_del_init(&sh->lru); + release_stripe(sh); + } /* If this takes us to the resync_max point where we have to pause, * then we need to write out the superblock. */ - sector_nr += conf->chunk_size>>9; + sector_nr += reshape_sectors; if (sector_nr >= mddev->resync_max) { /* Cannot proceed until we've updated the superblock... */ wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes) == 0); - mddev->reshape_position = conf->expand_progress; + mddev->reshape_position = conf->reshape_progress; + conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_DEVS, &mddev->flags) || kthread_should_stop()); spin_lock_irq(&conf->device_lock); - conf->expand_lo = mddev->reshape_position; + conf->reshape_safe = mddev->reshape_position; spin_unlock_irq(&conf->device_lock); wake_up(&conf->wait_for_overlap); } - return conf->chunk_size>>9; + return reshape_sectors; } /* FIXME go_faster isn't used */ @@ -3665,9 +3962,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski { raid5_conf_t *conf = (raid5_conf_t *) mddev->private; struct stripe_head *sh; - int pd_idx; - int raid_disks = conf->raid_disks; - sector_t max_sector = mddev->size << 1; + sector_t max_sector = mddev->dev_sectors; int sync_blocks; int still_degraded = 0; int i; @@ -3675,6 +3970,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski if (sector_nr >= max_sector) { /* just being told to finish up .. nothing much to do */ unplug_slaves(mddev); + if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) { end_reshape(conf); return 0; @@ -3705,7 +4001,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski */ if (mddev->degraded >= conf->max_degraded && test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { - sector_t rv = (mddev->size << 1) - sector_nr; + sector_t rv = mddev->dev_sectors - sector_nr; *skipped = 1; return rv; } @@ -3721,10 +4017,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski bitmap_cond_end_sync(mddev->bitmap, sector_nr); - pd_idx = stripe_to_pdidx(sector_nr, conf, raid_disks); - sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 1); + sh = get_active_stripe(conf, sector_nr, 0, 1); if (sh == NULL) { - sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 0); + sh = get_active_stripe(conf, sector_nr, 0, 0); /* make sure we don't swamp the stripe cache if someone else * is trying to get access */ @@ -3766,19 +4061,15 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) * it will be only one 'dd_idx' and only need one call to raid5_compute_sector. */ struct stripe_head *sh; - int dd_idx, pd_idx; + int dd_idx; sector_t sector, logical_sector, last_sector; int scnt = 0; int remaining; int handled = 0; logical_sector = raid_bio->bi_sector & ~((sector_t)STRIPE_SECTORS-1); - sector = raid5_compute_sector( logical_sector, - conf->raid_disks, - conf->raid_disks - conf->max_degraded, - &dd_idx, - &pd_idx, - conf); + sector = raid5_compute_sector(conf, logical_sector, + 0, &dd_idx, NULL); last_sector = raid_bio->bi_sector + (raid_bio->bi_size>>9); for (; logical_sector < last_sector; @@ -3790,7 +4081,7 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) /* already done this stripe */ continue; - sh = get_active_stripe(conf, sector, conf->raid_disks, pd_idx, 1); + sh = get_active_stripe(conf, sector, 0, 1); if (!sh) { /* failed to get a stripe - must wait */ @@ -3992,89 +4283,69 @@ static struct attribute_group raid5_attrs_group = { .attrs = raid5_attrs, }; -static int run(mddev_t *mddev) +static sector_t +raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks) +{ + raid5_conf_t *conf = mddev_to_conf(mddev); + + if (!sectors) + sectors = mddev->dev_sectors; + if (!raid_disks) { + /* size is defined by the smallest of previous and new size */ + if (conf->raid_disks < conf->previous_raid_disks) + raid_disks = conf->raid_disks; + else + raid_disks = conf->previous_raid_disks; + } + + sectors &= ~((sector_t)mddev->chunk_size/512 - 1); + sectors &= ~((sector_t)mddev->new_chunk/512 - 1); + return sectors * (raid_disks - conf->max_degraded); +} + +static raid5_conf_t *setup_conf(mddev_t *mddev) { raid5_conf_t *conf; int raid_disk, memory; mdk_rdev_t *rdev; struct disk_info *disk; - int working_disks = 0; - if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) { + if (mddev->new_level != 5 + && mddev->new_level != 4 + && mddev->new_level != 6) { printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n", - mdname(mddev), mddev->level); - return -EIO; + mdname(mddev), mddev->new_level); + return ERR_PTR(-EIO); } - - if (mddev->chunk_size < PAGE_SIZE) { - printk(KERN_ERR "md/raid5: chunk_size must be at least " - "PAGE_SIZE but %d < %ld\n", - mddev->chunk_size, PAGE_SIZE); - return -EINVAL; + if ((mddev->new_level == 5 + && !algorithm_valid_raid5(mddev->new_layout)) || + (mddev->new_level == 6 + && !algorithm_valid_raid6(mddev->new_layout))) { + printk(KERN_ERR "raid5: %s: layout %d not supported\n", + mdname(mddev), mddev->new_layout); + return ERR_PTR(-EIO); } - - if (mddev->reshape_position != MaxSector) { - /* Check that we can continue the reshape. - * Currently only disks can change, it must - * increase, and we must be past the point where - * a stripe over-writes itself - */ - sector_t here_new, here_old; - int old_disks; - int max_degraded = (mddev->level == 5 ? 1 : 2); - - if (mddev->new_level != mddev->level || - mddev->new_layout != mddev->layout || - mddev->new_chunk != mddev->chunk_size) { - printk(KERN_ERR "raid5: %s: unsupported reshape " - "required - aborting.\n", - mdname(mddev)); - return -EINVAL; - } - if (mddev->delta_disks <= 0) { - printk(KERN_ERR "raid5: %s: unsupported reshape " - "(reduce disks) required - aborting.\n", - mdname(mddev)); - return -EINVAL; - } - old_disks = mddev->raid_disks - mddev->delta_disks; - /* reshape_position must be on a new-stripe boundary, and one - * further up in new geometry must map after here in old - * geometry. - */ - here_new = mddev->reshape_position; - if (sector_div(here_new, (mddev->chunk_size>>9)* - (mddev->raid_disks - max_degraded))) { - printk(KERN_ERR "raid5: reshape_position not " - "on a stripe boundary\n"); - return -EINVAL; - } - /* here_new is the stripe we will write to */ - here_old = mddev->reshape_position; - sector_div(here_old, (mddev->chunk_size>>9)* - (old_disks-max_degraded)); - /* here_old is the first stripe that we might need to read - * from */ - if (here_new >= here_old) { - /* Reading from the same stripe as writing to - bad */ - printk(KERN_ERR "raid5: reshape_position too early for " - "auto-recovery - aborting.\n"); - return -EINVAL; - } - printk(KERN_INFO "raid5: reshape will continue\n"); - /* OK, we should be able to continue; */ + if (mddev->new_level == 6 && mddev->raid_disks < 4) { + printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n", + mdname(mddev), mddev->raid_disks); + return ERR_PTR(-EINVAL); } + if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) { + printk(KERN_ERR "raid5: invalid chunk size %d for %s\n", + mddev->new_chunk, mdname(mddev)); + return ERR_PTR(-EINVAL); + } - mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL); - if ((conf = mddev->private) == NULL) + conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL); + if (conf == NULL) goto abort; - if (mddev->reshape_position == MaxSector) { - conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks; - } else { - conf->raid_disks = mddev->raid_disks; + + conf->raid_disks = mddev->raid_disks; + if (mddev->reshape_position == MaxSector) + conf->previous_raid_disks = mddev->raid_disks; + else conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks; - } conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info), GFP_KERNEL); @@ -4086,13 +4357,12 @@ static int run(mddev_t *mddev) if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL) goto abort; - if (mddev->level == 6) { + if (mddev->new_level == 6) { conf->spare_page = alloc_page(GFP_KERNEL); if (!conf->spare_page) goto abort; } spin_lock_init(&conf->device_lock); - mddev->queue->queue_lock = &conf->device_lock; init_waitqueue_head(&conf->wait_for_stripe); init_waitqueue_head(&conf->wait_for_overlap); INIT_LIST_HEAD(&conf->handle_list); @@ -4121,47 +4391,134 @@ static int run(mddev_t *mddev) printk(KERN_INFO "raid5: device %s operational as raid" " disk %d\n", bdevname(rdev->bdev,b), raid_disk); - working_disks++; } else /* Cannot rely on bitmap to complete recovery */ conf->fullsync = 1; } - /* - * 0 for a fully functional array, 1 or 2 for a degraded array. - */ - mddev->degraded = conf->raid_disks - working_disks; - conf->mddev = mddev; - conf->chunk_size = mddev->chunk_size; - conf->level = mddev->level; + conf->chunk_size = mddev->new_chunk; + conf->level = mddev->new_level; if (conf->level == 6) conf->max_degraded = 2; else conf->max_degraded = 1; - conf->algorithm = mddev->layout; + conf->algorithm = mddev->new_layout; conf->max_nr_stripes = NR_STRIPES; - conf->expand_progress = mddev->reshape_position; - - /* device size must be a multiple of chunk size */ - mddev->size &= ~(mddev->chunk_size/1024 -1); - mddev->resync_max_sectors = mddev->size << 1; + conf->reshape_progress = mddev->reshape_position; + if (conf->reshape_progress != MaxSector) { + conf->prev_chunk = mddev->chunk_size; + conf->prev_algo = mddev->layout; + } - if (conf->level == 6 && conf->raid_disks < 4) { - printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n", - mdname(mddev), conf->raid_disks); + memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + + conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; + if (grow_stripes(conf, conf->max_nr_stripes)) { + printk(KERN_ERR + "raid5: couldn't allocate %dkB for buffers\n", memory); goto abort; - } - if (!conf->chunk_size || conf->chunk_size % 4) { - printk(KERN_ERR "raid5: invalid chunk size %d for %s\n", - conf->chunk_size, mdname(mddev)); + } else + printk(KERN_INFO "raid5: allocated %dkB for %s\n", + memory, mdname(mddev)); + + conf->thread = md_register_thread(raid5d, mddev, "%s_raid5"); + if (!conf->thread) { + printk(KERN_ERR + "raid5: couldn't allocate thread for %s\n", + mdname(mddev)); goto abort; } - if (conf->algorithm > ALGORITHM_RIGHT_SYMMETRIC) { - printk(KERN_ERR - "raid5: unsupported parity algorithm %d for %s\n", - conf->algorithm, mdname(mddev)); - goto abort; + + return conf; + + abort: + if (conf) { + shrink_stripes(conf); + safe_put_page(conf->spare_page); + kfree(conf->disks); + kfree(conf->stripe_hashtbl); + kfree(conf); + return ERR_PTR(-EIO); + } else + return ERR_PTR(-ENOMEM); +} + +static int run(mddev_t *mddev) +{ + raid5_conf_t *conf; + int working_disks = 0; + mdk_rdev_t *rdev; + + if (mddev->reshape_position != MaxSector) { + /* Check that we can continue the reshape. + * Currently only disks can change, it must + * increase, and we must be past the point where + * a stripe over-writes itself + */ + sector_t here_new, here_old; + int old_disks; + int max_degraded = (mddev->level == 6 ? 2 : 1); + + if (mddev->new_level != mddev->level) { + printk(KERN_ERR "raid5: %s: unsupported reshape " + "required - aborting.\n", + mdname(mddev)); + return -EINVAL; + } + old_disks = mddev->raid_disks - mddev->delta_disks; + /* reshape_position must be on a new-stripe boundary, and one + * further up in new geometry must map after here in old + * geometry. + */ + here_new = mddev->reshape_position; + if (sector_div(here_new, (mddev->new_chunk>>9)* + (mddev->raid_disks - max_degraded))) { + printk(KERN_ERR "raid5: reshape_position not " + "on a stripe boundary\n"); + return -EINVAL; + } + /* here_new is the stripe we will write to */ + here_old = mddev->reshape_position; + sector_div(here_old, (mddev->chunk_size>>9)* + (old_disks-max_degraded)); + /* here_old is the first stripe that we might need to read + * from */ + if (here_new >= here_old) { + /* Reading from the same stripe as writing to - bad */ + printk(KERN_ERR "raid5: reshape_position too early for " + "auto-recovery - aborting.\n"); + return -EINVAL; + } + printk(KERN_INFO "raid5: reshape will continue\n"); + /* OK, we should be able to continue; */ + } else { + BUG_ON(mddev->level != mddev->new_level); + BUG_ON(mddev->layout != mddev->new_layout); + BUG_ON(mddev->chunk_size != mddev->new_chunk); + BUG_ON(mddev->delta_disks != 0); } + + if (mddev->private == NULL) + conf = setup_conf(mddev); + else + conf = mddev->private; + + if (IS_ERR(conf)) + return PTR_ERR(conf); + + mddev->thread = conf->thread; + conf->thread = NULL; + mddev->private = conf; + + /* + * 0 for a fully functional array, 1 or 2 for a degraded array. + */ + list_for_each_entry(rdev, &mddev->disks, same_set) + if (rdev->raid_disk >= 0 && + test_bit(In_sync, &rdev->flags)) + working_disks++; + + mddev->degraded = conf->raid_disks - working_disks; + if (mddev->degraded > conf->max_degraded) { printk(KERN_ERR "raid5: not enough operational devices for %s" " (%d/%d failed)\n", @@ -4169,6 +4526,10 @@ static int run(mddev_t *mddev) goto abort; } + /* device size must be a multiple of chunk size */ + mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1); + mddev->resync_max_sectors = mddev->dev_sectors; + if (mddev->degraded > 0 && mddev->recovery_cp != MaxSector) { if (mddev->ok_start_degraded) @@ -4184,43 +4545,22 @@ static int run(mddev_t *mddev) } } - { - mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5"); - if (!mddev->thread) { - printk(KERN_ERR - "raid5: couldn't allocate thread for %s\n", - mdname(mddev)); - goto abort; - } - } - memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + - conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; - if (grow_stripes(conf, conf->max_nr_stripes)) { - printk(KERN_ERR - "raid5: couldn't allocate %dkB for buffers\n", memory); - shrink_stripes(conf); - md_unregister_thread(mddev->thread); - goto abort; - } else - printk(KERN_INFO "raid5: allocated %dkB for %s\n", - memory, mdname(mddev)); - if (mddev->degraded == 0) printk("raid5: raid level %d set %s active with %d out of %d" - " devices, algorithm %d\n", conf->level, mdname(mddev), - mddev->raid_disks-mddev->degraded, mddev->raid_disks, - conf->algorithm); + " devices, algorithm %d\n", conf->level, mdname(mddev), + mddev->raid_disks-mddev->degraded, mddev->raid_disks, + mddev->new_layout); else printk(KERN_ALERT "raid5: raid level %d set %s active with %d" " out of %d devices, algorithm %d\n", conf->level, mdname(mddev), mddev->raid_disks - mddev->degraded, - mddev->raid_disks, conf->algorithm); + mddev->raid_disks, mddev->new_layout); print_raid5_conf(conf); - if (conf->expand_progress != MaxSector) { + if (conf->reshape_progress != MaxSector) { printk("...ok start reshape thread\n"); - conf->expand_lo = conf->expand_progress; + conf->reshape_safe = conf->reshape_progress; atomic_set(&conf->reshape_stripes, 0); clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); @@ -4247,18 +4587,22 @@ static int run(mddev_t *mddev) "raid5: failed to create sysfs attributes for %s\n", mdname(mddev)); + mddev->queue->queue_lock = &conf->device_lock; + mddev->queue->unplug_fn = raid5_unplug_device; mddev->queue->backing_dev_info.congested_data = mddev; mddev->queue->backing_dev_info.congested_fn = raid5_congested; - mddev->array_sectors = 2 * mddev->size * (conf->previous_raid_disks - - conf->max_degraded); + md_set_array_sectors(mddev, raid5_size(mddev, 0, 0)); blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec); return 0; abort: + md_unregister_thread(mddev->thread); + mddev->thread = NULL; if (conf) { + shrink_stripes(conf); print_raid5_conf(conf); safe_put_page(conf->spare_page); kfree(conf->disks); @@ -4396,6 +4740,10 @@ static int raid5_remove_disk(mddev_t *mddev, int number) print_raid5_conf(conf); rdev = p->rdev; if (rdev) { + if (number >= conf->raid_disks && + conf->reshape_progress == MaxSector) + clear_bit(In_sync, &rdev->flags); + if (test_bit(In_sync, &rdev->flags) || atomic_read(&rdev->nr_pending)) { err = -EBUSY; @@ -4405,7 +4753,8 @@ static int raid5_remove_disk(mddev_t *mddev, int number) * isn't possible. */ if (!test_bit(Faulty, &rdev->flags) && - mddev->degraded <= conf->max_degraded) { + mddev->degraded <= conf->max_degraded && + number < conf->raid_disks) { err = -EBUSY; goto abort; } @@ -4472,36 +4821,48 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors) * any io in the removed space completes, but it hardly seems * worth it. */ - raid5_conf_t *conf = mddev_to_conf(mddev); - sectors &= ~((sector_t)mddev->chunk_size/512 - 1); - mddev->array_sectors = sectors * (mddev->raid_disks - - conf->max_degraded); + md_set_array_sectors(mddev, raid5_size(mddev, sectors, + mddev->raid_disks)); + if (mddev->array_sectors > + raid5_size(mddev, sectors, mddev->raid_disks)) + return -EINVAL; set_capacity(mddev->gendisk, mddev->array_sectors); mddev->changed = 1; - if (sectors/2 > mddev->size && mddev->recovery_cp == MaxSector) { - mddev->recovery_cp = mddev->size << 1; + if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) { + mddev->recovery_cp = mddev->dev_sectors; set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); } - mddev->size = sectors /2; + mddev->dev_sectors = sectors; mddev->resync_max_sectors = sectors; return 0; } -#ifdef CONFIG_MD_RAID5_RESHAPE static int raid5_check_reshape(mddev_t *mddev) { raid5_conf_t *conf = mddev_to_conf(mddev); - int err; - if (mddev->delta_disks < 0 || - mddev->new_level != mddev->level) - return -EINVAL; /* Cannot shrink array or change level yet */ - if (mddev->delta_disks == 0) - return 0; /* nothing to do */ + if (mddev->delta_disks == 0 && + mddev->new_layout == mddev->layout && + mddev->new_chunk == mddev->chunk_size) + return -EINVAL; /* nothing to do */ if (mddev->bitmap) /* Cannot grow a bitmap yet */ return -EBUSY; + if (mddev->degraded > conf->max_degraded) + return -EINVAL; + if (mddev->delta_disks < 0) { + /* We might be able to shrink, but the devices must + * be made bigger first. + * For raid6, 4 is the minimum size. + * Otherwise 2 is the minimum + */ + int min = 2; + if (mddev->level == 6) + min = 4; + if (mddev->raid_disks + mddev->delta_disks < min) + return -EINVAL; + } /* Can only proceed if there are plenty of stripe_heads. * We need a minimum of one full stripe,, and for sensible progress @@ -4514,18 +4875,12 @@ static int raid5_check_reshape(mddev_t *mddev) if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes || (mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) { printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n", - (mddev->chunk_size / STRIPE_SIZE)*4); + (max(mddev->chunk_size, mddev->new_chunk) + / STRIPE_SIZE)*4); return -ENOSPC; } - err = resize_stripes(conf, conf->raid_disks + mddev->delta_disks); - if (err) - return err; - - if (mddev->degraded > conf->max_degraded) - return -EINVAL; - /* looks like we might be able to manage this */ - return 0; + return resize_stripes(conf, conf->raid_disks + mddev->delta_disks); } static int raid5_start_reshape(mddev_t *mddev) @@ -4550,12 +4905,31 @@ static int raid5_start_reshape(mddev_t *mddev) */ return -EINVAL; + /* Refuse to reduce size of the array. Any reductions in + * array size must be through explicit setting of array_size + * attribute. + */ + if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks) + < mddev->array_sectors) { + printk(KERN_ERR "md: %s: array size must be reduced " + "before number of disks\n", mdname(mddev)); + return -EINVAL; + } + atomic_set(&conf->reshape_stripes, 0); spin_lock_irq(&conf->device_lock); conf->previous_raid_disks = conf->raid_disks; conf->raid_disks += mddev->delta_disks; - conf->expand_progress = 0; - conf->expand_lo = 0; + conf->prev_chunk = conf->chunk_size; + conf->chunk_size = mddev->new_chunk; + conf->prev_algo = conf->algorithm; + conf->algorithm = mddev->new_layout; + if (mddev->delta_disks < 0) + conf->reshape_progress = raid5_size(mddev, 0, 0); + else + conf->reshape_progress = 0; + conf->reshape_safe = conf->reshape_progress; + conf->generation++; spin_unlock_irq(&conf->device_lock); /* Add some new drives, as many as will fit. @@ -4580,9 +4954,12 @@ static int raid5_start_reshape(mddev_t *mddev) break; } - spin_lock_irqsave(&conf->device_lock, flags); - mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) - added_devices; - spin_unlock_irqrestore(&conf->device_lock, flags); + if (mddev->delta_disks > 0) { + spin_lock_irqsave(&conf->device_lock, flags); + mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) + - added_devices; + spin_unlock_irqrestore(&conf->device_lock, flags); + } mddev->raid_disks = conf->raid_disks; mddev->reshape_position = 0; set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -4597,52 +4974,86 @@ static int raid5_start_reshape(mddev_t *mddev) mddev->recovery = 0; spin_lock_irq(&conf->device_lock); mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks; - conf->expand_progress = MaxSector; + conf->reshape_progress = MaxSector; spin_unlock_irq(&conf->device_lock); return -EAGAIN; } + conf->reshape_checkpoint = jiffies; md_wakeup_thread(mddev->sync_thread); md_new_event(mddev); return 0; } -#endif +/* This is called from the reshape thread and should make any + * changes needed in 'conf' + */ static void end_reshape(raid5_conf_t *conf) { - struct block_device *bdev; if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) { - conf->mddev->array_sectors = 2 * conf->mddev->size * - (conf->raid_disks - conf->max_degraded); - set_capacity(conf->mddev->gendisk, conf->mddev->array_sectors); - conf->mddev->changed = 1; - - bdev = bdget_disk(conf->mddev->gendisk, 0); - if (bdev) { - mutex_lock(&bdev->bd_inode->i_mutex); - i_size_write(bdev->bd_inode, - (loff_t)conf->mddev->array_sectors << 9); - mutex_unlock(&bdev->bd_inode->i_mutex); - bdput(bdev); - } + spin_lock_irq(&conf->device_lock); - conf->expand_progress = MaxSector; + conf->previous_raid_disks = conf->raid_disks; + conf->reshape_progress = MaxSector; spin_unlock_irq(&conf->device_lock); - conf->mddev->reshape_position = MaxSector; + wake_up(&conf->wait_for_overlap); /* read-ahead size must cover two whole stripes, which is * 2 * (datadisks) * chunksize where 'n' is the number of raid devices */ { - int data_disks = conf->previous_raid_disks - conf->max_degraded; - int stripe = data_disks * - (conf->mddev->chunk_size / PAGE_SIZE); + int data_disks = conf->raid_disks - conf->max_degraded; + int stripe = data_disks * (conf->chunk_size + / PAGE_SIZE); if (conf->mddev->queue->backing_dev_info.ra_pages < 2 * stripe) conf->mddev->queue->backing_dev_info.ra_pages = 2 * stripe; } } } +/* This is called from the raid5d thread with mddev_lock held. + * It makes config changes to the device. + */ +static void raid5_finish_reshape(mddev_t *mddev) +{ + struct block_device *bdev; + raid5_conf_t *conf = mddev_to_conf(mddev); + + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { + + if (mddev->delta_disks > 0) { + md_set_array_sectors(mddev, raid5_size(mddev, 0, 0)); + set_capacity(mddev->gendisk, mddev->array_sectors); + mddev->changed = 1; + + bdev = bdget_disk(mddev->gendisk, 0); + if (bdev) { + mutex_lock(&bdev->bd_inode->i_mutex); + i_size_write(bdev->bd_inode, + (loff_t)mddev->array_sectors << 9); + mutex_unlock(&bdev->bd_inode->i_mutex); + bdput(bdev); + } + } else { + int d; + mddev->degraded = conf->raid_disks; + for (d = 0; d < conf->raid_disks ; d++) + if (conf->disks[d].rdev && + test_bit(In_sync, + &conf->disks[d].rdev->flags)) + mddev->degraded--; + for (d = conf->raid_disks ; + d < conf->raid_disks - mddev->delta_disks; + d++) + raid5_remove_disk(mddev, d); + } + mddev->layout = conf->algorithm; + mddev->chunk_size = conf->chunk_size; + mddev->reshape_position = MaxSector; + mddev->delta_disks = 0; + } +} + static void raid5_quiesce(mddev_t *mddev, int state) { raid5_conf_t *conf = mddev_to_conf(mddev); @@ -4672,6 +5083,212 @@ static void raid5_quiesce(mddev_t *mddev, int state) } } + +static void *raid5_takeover_raid1(mddev_t *mddev) +{ + int chunksect; + + if (mddev->raid_disks != 2 || + mddev->degraded > 1) + return ERR_PTR(-EINVAL); + + /* Should check if there are write-behind devices? */ + + chunksect = 64*2; /* 64K by default */ + + /* The array must be an exact multiple of chunksize */ + while (chunksect && (mddev->array_sectors & (chunksect-1))) + chunksect >>= 1; + + if ((chunksect<<9) < STRIPE_SIZE) + /* array size does not allow a suitable chunk size */ + return ERR_PTR(-EINVAL); + + mddev->new_level = 5; + mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC; + mddev->new_chunk = chunksect << 9; + + return setup_conf(mddev); +} + +static void *raid5_takeover_raid6(mddev_t *mddev) +{ + int new_layout; + + switch (mddev->layout) { + case ALGORITHM_LEFT_ASYMMETRIC_6: + new_layout = ALGORITHM_LEFT_ASYMMETRIC; + break; + case ALGORITHM_RIGHT_ASYMMETRIC_6: + new_layout = ALGORITHM_RIGHT_ASYMMETRIC; + break; + case ALGORITHM_LEFT_SYMMETRIC_6: + new_layout = ALGORITHM_LEFT_SYMMETRIC; + break; + case ALGORITHM_RIGHT_SYMMETRIC_6: + new_layout = ALGORITHM_RIGHT_SYMMETRIC; + break; + case ALGORITHM_PARITY_0_6: + new_layout = ALGORITHM_PARITY_0; + break; + case ALGORITHM_PARITY_N: + new_layout = ALGORITHM_PARITY_N; + break; + default: + return ERR_PTR(-EINVAL); + } + mddev->new_level = 5; + mddev->new_layout = new_layout; + mddev->delta_disks = -1; + mddev->raid_disks -= 1; + return setup_conf(mddev); +} + + +static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk) +{ + /* For a 2-drive array, the layout and chunk size can be changed + * immediately as not restriping is needed. + * For larger arrays we record the new value - after validation + * to be used by a reshape pass. + */ + raid5_conf_t *conf = mddev_to_conf(mddev); + + if (new_layout >= 0 && !algorithm_valid_raid5(new_layout)) + return -EINVAL; + if (new_chunk > 0) { + if (new_chunk & (new_chunk-1)) + /* not a power of 2 */ + return -EINVAL; + if (new_chunk < PAGE_SIZE) + return -EINVAL; + if (mddev->array_sectors & ((new_chunk>>9)-1)) + /* not factor of array size */ + return -EINVAL; + } + + /* They look valid */ + + if (mddev->raid_disks == 2) { + + if (new_layout >= 0) { + conf->algorithm = new_layout; + mddev->layout = mddev->new_layout = new_layout; + } + if (new_chunk > 0) { + conf->chunk_size = new_chunk; + mddev->chunk_size = mddev->new_chunk = new_chunk; + } + set_bit(MD_CHANGE_DEVS, &mddev->flags); + md_wakeup_thread(mddev->thread); + } else { + if (new_layout >= 0) + mddev->new_layout = new_layout; + if (new_chunk > 0) + mddev->new_chunk = new_chunk; + } + return 0; +} + +static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk) +{ + if (new_layout >= 0 && !algorithm_valid_raid6(new_layout)) + return -EINVAL; + if (new_chunk > 0) { + if (new_chunk & (new_chunk-1)) + /* not a power of 2 */ + return -EINVAL; + if (new_chunk < PAGE_SIZE) + return -EINVAL; + if (mddev->array_sectors & ((new_chunk>>9)-1)) + /* not factor of array size */ + return -EINVAL; + } + + /* They look valid */ + + if (new_layout >= 0) + mddev->new_layout = new_layout; + if (new_chunk > 0) + mddev->new_chunk = new_chunk; + + return 0; +} + +static void *raid5_takeover(mddev_t *mddev) +{ + /* raid5 can take over: + * raid0 - if all devices are the same - make it a raid4 layout + * raid1 - if there are two drives. We need to know the chunk size + * raid4 - trivial - just use a raid4 layout. + * raid6 - Providing it is a *_6 layout + * + * For now, just do raid1 + */ + + if (mddev->level == 1) + return raid5_takeover_raid1(mddev); + if (mddev->level == 4) { + mddev->new_layout = ALGORITHM_PARITY_N; + mddev->new_level = 5; + return setup_conf(mddev); + } + if (mddev->level == 6) + return raid5_takeover_raid6(mddev); + + return ERR_PTR(-EINVAL); +} + + +static struct mdk_personality raid5_personality; + +static void *raid6_takeover(mddev_t *mddev) +{ + /* Currently can only take over a raid5. We map the + * personality to an equivalent raid6 personality + * with the Q block at the end. + */ + int new_layout; + + if (mddev->pers != &raid5_personality) + return ERR_PTR(-EINVAL); + if (mddev->degraded > 1) + return ERR_PTR(-EINVAL); + if (mddev->raid_disks > 253) + return ERR_PTR(-EINVAL); + if (mddev->raid_disks < 3) + return ERR_PTR(-EINVAL); + + switch (mddev->layout) { + case ALGORITHM_LEFT_ASYMMETRIC: + new_layout = ALGORITHM_LEFT_ASYMMETRIC_6; + break; + case ALGORITHM_RIGHT_ASYMMETRIC: + new_layout = ALGORITHM_RIGHT_ASYMMETRIC_6; + break; + case ALGORITHM_LEFT_SYMMETRIC: + new_layout = ALGORITHM_LEFT_SYMMETRIC_6; + break; + case ALGORITHM_RIGHT_SYMMETRIC: + new_layout = ALGORITHM_RIGHT_SYMMETRIC_6; + break; + case ALGORITHM_PARITY_0: + new_layout = ALGORITHM_PARITY_0_6; + break; + case ALGORITHM_PARITY_N: + new_layout = ALGORITHM_PARITY_N; + break; + default: + return ERR_PTR(-EINVAL); + } + mddev->new_level = 6; + mddev->new_layout = new_layout; + mddev->delta_disks = 1; + mddev->raid_disks += 1; + return setup_conf(mddev); +} + + static struct mdk_personality raid6_personality = { .name = "raid6", @@ -4687,11 +5304,13 @@ static struct mdk_personality raid6_personality = .spare_active = raid5_spare_active, .sync_request = sync_request, .resize = raid5_resize, -#ifdef CONFIG_MD_RAID5_RESHAPE + .size = raid5_size, .check_reshape = raid5_check_reshape, .start_reshape = raid5_start_reshape, -#endif + .finish_reshape = raid5_finish_reshape, .quiesce = raid5_quiesce, + .takeover = raid6_takeover, + .reconfig = raid6_reconfig, }; static struct mdk_personality raid5_personality = { @@ -4708,11 +5327,13 @@ static struct mdk_personality raid5_personality = .spare_active = raid5_spare_active, .sync_request = sync_request, .resize = raid5_resize, -#ifdef CONFIG_MD_RAID5_RESHAPE + .size = raid5_size, .check_reshape = raid5_check_reshape, .start_reshape = raid5_start_reshape, -#endif + .finish_reshape = raid5_finish_reshape, .quiesce = raid5_quiesce, + .takeover = raid5_takeover, + .reconfig = raid5_reconfig, }; static struct mdk_personality raid4_personality = @@ -4730,20 +5351,15 @@ static struct mdk_personality raid4_personality = .spare_active = raid5_spare_active, .sync_request = sync_request, .resize = raid5_resize, -#ifdef CONFIG_MD_RAID5_RESHAPE + .size = raid5_size, .check_reshape = raid5_check_reshape, .start_reshape = raid5_start_reshape, -#endif + .finish_reshape = raid5_finish_reshape, .quiesce = raid5_quiesce, }; static int __init raid5_init(void) { - int e; - - e = raid6_select_algo(); - if ( e ) - return e; register_md_personality(&raid6_personality); register_md_personality(&raid5_personality); register_md_personality(&raid4_personality); diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h new file mode 100644 index 000000000000..52ba99954dec --- /dev/null +++ b/drivers/md/raid5.h @@ -0,0 +1,474 @@ +#ifndef _RAID5_H +#define _RAID5_H + +#include <linux/raid/xor.h> + +/* + * + * Each stripe contains one buffer per disc. Each buffer can be in + * one of a number of states stored in "flags". Changes between + * these states happen *almost* exclusively under a per-stripe + * spinlock. Some very specific changes can happen in bi_end_io, and + * these are not protected by the spin lock. + * + * The flag bits that are used to represent these states are: + * R5_UPTODATE and R5_LOCKED + * + * State Empty == !UPTODATE, !LOCK + * We have no data, and there is no active request + * State Want == !UPTODATE, LOCK + * A read request is being submitted for this block + * State Dirty == UPTODATE, LOCK + * Some new data is in this buffer, and it is being written out + * State Clean == UPTODATE, !LOCK + * We have valid data which is the same as on disc + * + * The possible state transitions are: + * + * Empty -> Want - on read or write to get old data for parity calc + * Empty -> Dirty - on compute_parity to satisfy write/sync request.(RECONSTRUCT_WRITE) + * Empty -> Clean - on compute_block when computing a block for failed drive + * Want -> Empty - on failed read + * Want -> Clean - on successful completion of read request + * Dirty -> Clean - on successful completion of write request + * Dirty -> Clean - on failed write + * Clean -> Dirty - on compute_parity to satisfy write/sync (RECONSTRUCT or RMW) + * + * The Want->Empty, Want->Clean, Dirty->Clean, transitions + * all happen in b_end_io at interrupt time. + * Each sets the Uptodate bit before releasing the Lock bit. + * This leaves one multi-stage transition: + * Want->Dirty->Clean + * This is safe because thinking that a Clean buffer is actually dirty + * will at worst delay some action, and the stripe will be scheduled + * for attention after the transition is complete. + * + * There is one possibility that is not covered by these states. That + * is if one drive has failed and there is a spare being rebuilt. We + * can't distinguish between a clean block that has been generated + * from parity calculations, and a clean block that has been + * successfully written to the spare ( or to parity when resyncing). + * To distingush these states we have a stripe bit STRIPE_INSYNC that + * is set whenever a write is scheduled to the spare, or to the parity + * disc if there is no spare. A sync request clears this bit, and + * when we find it set with no buffers locked, we know the sync is + * complete. + * + * Buffers for the md device that arrive via make_request are attached + * to the appropriate stripe in one of two lists linked on b_reqnext. + * One list (bh_read) for read requests, one (bh_write) for write. + * There should never be more than one buffer on the two lists + * together, but we are not guaranteed of that so we allow for more. + * + * If a buffer is on the read list when the associated cache buffer is + * Uptodate, the data is copied into the read buffer and it's b_end_io + * routine is called. This may happen in the end_request routine only + * if the buffer has just successfully been read. end_request should + * remove the buffers from the list and then set the Uptodate bit on + * the buffer. Other threads may do this only if they first check + * that the Uptodate bit is set. Once they have checked that they may + * take buffers off the read queue. + * + * When a buffer on the write list is committed for write it is copied + * into the cache buffer, which is then marked dirty, and moved onto a + * third list, the written list (bh_written). Once both the parity + * block and the cached buffer are successfully written, any buffer on + * a written list can be returned with b_end_io. + * + * The write list and read list both act as fifos. The read list is + * protected by the device_lock. The write and written lists are + * protected by the stripe lock. The device_lock, which can be + * claimed while the stipe lock is held, is only for list + * manipulations and will only be held for a very short time. It can + * be claimed from interrupts. + * + * + * Stripes in the stripe cache can be on one of two lists (or on + * neither). The "inactive_list" contains stripes which are not + * currently being used for any request. They can freely be reused + * for another stripe. The "handle_list" contains stripes that need + * to be handled in some way. Both of these are fifo queues. Each + * stripe is also (potentially) linked to a hash bucket in the hash + * table so that it can be found by sector number. Stripes that are + * not hashed must be on the inactive_list, and will normally be at + * the front. All stripes start life this way. + * + * The inactive_list, handle_list and hash bucket lists are all protected by the + * device_lock. + * - stripes on the inactive_list never have their stripe_lock held. + * - stripes have a reference counter. If count==0, they are on a list. + * - If a stripe might need handling, STRIPE_HANDLE is set. + * - When refcount reaches zero, then if STRIPE_HANDLE it is put on + * handle_list else inactive_list + * + * This, combined with the fact that STRIPE_HANDLE is only ever + * cleared while a stripe has a non-zero count means that if the + * refcount is 0 and STRIPE_HANDLE is set, then it is on the + * handle_list and if recount is 0 and STRIPE_HANDLE is not set, then + * the stripe is on inactive_list. + * + * The possible transitions are: + * activate an unhashed/inactive stripe (get_active_stripe()) + * lockdev check-hash unlink-stripe cnt++ clean-stripe hash-stripe unlockdev + * activate a hashed, possibly active stripe (get_active_stripe()) + * lockdev check-hash if(!cnt++)unlink-stripe unlockdev + * attach a request to an active stripe (add_stripe_bh()) + * lockdev attach-buffer unlockdev + * handle a stripe (handle_stripe()) + * lockstripe clrSTRIPE_HANDLE ... + * (lockdev check-buffers unlockdev) .. + * change-state .. + * record io/ops needed unlockstripe schedule io/ops + * release an active stripe (release_stripe()) + * lockdev if (!--cnt) { if STRIPE_HANDLE, add to handle_list else add to inactive-list } unlockdev + * + * The refcount counts each thread that have activated the stripe, + * plus raid5d if it is handling it, plus one for each active request + * on a cached buffer, and plus one if the stripe is undergoing stripe + * operations. + * + * Stripe operations are performed outside the stripe lock, + * the stripe operations are: + * -copying data between the stripe cache and user application buffers + * -computing blocks to save a disk access, or to recover a missing block + * -updating the parity on a write operation (reconstruct write and + * read-modify-write) + * -checking parity correctness + * -running i/o to disk + * These operations are carried out by raid5_run_ops which uses the async_tx + * api to (optionally) offload operations to dedicated hardware engines. + * When requesting an operation handle_stripe sets the pending bit for the + * operation and increments the count. raid5_run_ops is then run whenever + * the count is non-zero. + * There are some critical dependencies between the operations that prevent some + * from being requested while another is in flight. + * 1/ Parity check operations destroy the in cache version of the parity block, + * so we prevent parity dependent operations like writes and compute_blocks + * from starting while a check is in progress. Some dma engines can perform + * the check without damaging the parity block, in these cases the parity + * block is re-marked up to date (assuming the check was successful) and is + * not re-read from disk. + * 2/ When a write operation is requested we immediately lock the affected + * blocks, and mark them as not up to date. This causes new read requests + * to be held off, as well as parity checks and compute block operations. + * 3/ Once a compute block operation has been requested handle_stripe treats + * that block as if it is up to date. raid5_run_ops guaruntees that any + * operation that is dependent on the compute block result is initiated after + * the compute block completes. + */ + +/* + * Operations state - intermediate states that are visible outside of sh->lock + * In general _idle indicates nothing is running, _run indicates a data + * processing operation is active, and _result means the data processing result + * is stable and can be acted upon. For simple operations like biofill and + * compute that only have an _idle and _run state they are indicated with + * sh->state flags (STRIPE_BIOFILL_RUN and STRIPE_COMPUTE_RUN) + */ +/** + * enum check_states - handles syncing / repairing a stripe + * @check_state_idle - check operations are quiesced + * @check_state_run - check operation is running + * @check_state_result - set outside lock when check result is valid + * @check_state_compute_run - check failed and we are repairing + * @check_state_compute_result - set outside lock when compute result is valid + */ +enum check_states { + check_state_idle = 0, + check_state_run, /* parity check */ + check_state_check_result, + check_state_compute_run, /* parity repair */ + check_state_compute_result, +}; + +/** + * enum reconstruct_states - handles writing or expanding a stripe + */ +enum reconstruct_states { + reconstruct_state_idle = 0, + reconstruct_state_prexor_drain_run, /* prexor-write */ + reconstruct_state_drain_run, /* write */ + reconstruct_state_run, /* expand */ + reconstruct_state_prexor_drain_result, + reconstruct_state_drain_result, + reconstruct_state_result, +}; + +struct stripe_head { + struct hlist_node hash; + struct list_head lru; /* inactive_list or handle_list */ + struct raid5_private_data *raid_conf; + short generation; /* increments with every + * reshape */ + sector_t sector; /* sector of this row */ + short pd_idx; /* parity disk index */ + short qd_idx; /* 'Q' disk index for raid6 */ + short ddf_layout;/* use DDF ordering to calculate Q */ + unsigned long state; /* state flags */ + atomic_t count; /* nr of active thread/requests */ + spinlock_t lock; + int bm_seq; /* sequence number for bitmap flushes */ + int disks; /* disks in stripe */ + enum check_states check_state; + enum reconstruct_states reconstruct_state; + /* stripe_operations + * @target - STRIPE_OP_COMPUTE_BLK target + */ + struct stripe_operations { + int target; + u32 zero_sum_result; + } ops; + struct r5dev { + struct bio req; + struct bio_vec vec; + struct page *page; + struct bio *toread, *read, *towrite, *written; + sector_t sector; /* sector of this page */ + unsigned long flags; + } dev[1]; /* allocated with extra space depending of RAID geometry */ +}; + +/* stripe_head_state - collects and tracks the dynamic state of a stripe_head + * for handle_stripe. It is only valid under spin_lock(sh->lock); + */ +struct stripe_head_state { + int syncing, expanding, expanded; + int locked, uptodate, to_read, to_write, failed, written; + int to_fill, compute, req_compute, non_overwrite; + int failed_num; + unsigned long ops_request; +}; + +/* r6_state - extra state data only relevant to r6 */ +struct r6_state { + int p_failed, q_failed, failed_num[2]; +}; + +/* Flags */ +#define R5_UPTODATE 0 /* page contains current data */ +#define R5_LOCKED 1 /* IO has been submitted on "req" */ +#define R5_OVERWRITE 2 /* towrite covers whole page */ +/* and some that are internal to handle_stripe */ +#define R5_Insync 3 /* rdev && rdev->in_sync at start */ +#define R5_Wantread 4 /* want to schedule a read */ +#define R5_Wantwrite 5 +#define R5_Overlap 7 /* There is a pending overlapping request on this block */ +#define R5_ReadError 8 /* seen a read error here recently */ +#define R5_ReWrite 9 /* have tried to over-write the readerror */ + +#define R5_Expanded 10 /* This block now has post-expand data */ +#define R5_Wantcompute 11 /* compute_block in progress treat as + * uptodate + */ +#define R5_Wantfill 12 /* dev->toread contains a bio that needs + * filling + */ +#define R5_Wantdrain 13 /* dev->towrite needs to be drained */ +/* + * Write method + */ +#define RECONSTRUCT_WRITE 1 +#define READ_MODIFY_WRITE 2 +/* not a write method, but a compute_parity mode */ +#define CHECK_PARITY 3 +/* Additional compute_parity mode -- updates the parity w/o LOCKING */ +#define UPDATE_PARITY 4 + +/* + * Stripe state + */ +#define STRIPE_HANDLE 2 +#define STRIPE_SYNCING 3 +#define STRIPE_INSYNC 4 +#define STRIPE_PREREAD_ACTIVE 5 +#define STRIPE_DELAYED 6 +#define STRIPE_DEGRADED 7 +#define STRIPE_BIT_DELAY 8 +#define STRIPE_EXPANDING 9 +#define STRIPE_EXPAND_SOURCE 10 +#define STRIPE_EXPAND_READY 11 +#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */ +#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */ +#define STRIPE_BIOFILL_RUN 14 +#define STRIPE_COMPUTE_RUN 15 +/* + * Operation request flags + */ +#define STRIPE_OP_BIOFILL 0 +#define STRIPE_OP_COMPUTE_BLK 1 +#define STRIPE_OP_PREXOR 2 +#define STRIPE_OP_BIODRAIN 3 +#define STRIPE_OP_POSTXOR 4 +#define STRIPE_OP_CHECK 5 + +/* + * Plugging: + * + * To improve write throughput, we need to delay the handling of some + * stripes until there has been a chance that several write requests + * for the one stripe have all been collected. + * In particular, any write request that would require pre-reading + * is put on a "delayed" queue until there are no stripes currently + * in a pre-read phase. Further, if the "delayed" queue is empty when + * a stripe is put on it then we "plug" the queue and do not process it + * until an unplug call is made. (the unplug_io_fn() is called). + * + * When preread is initiated on a stripe, we set PREREAD_ACTIVE and add + * it to the count of prereading stripes. + * When write is initiated, or the stripe refcnt == 0 (just in case) we + * clear the PREREAD_ACTIVE flag and decrement the count + * Whenever the 'handle' queue is empty and the device is not plugged, we + * move any strips from delayed to handle and clear the DELAYED flag and set + * PREREAD_ACTIVE. + * In stripe_handle, if we find pre-reading is necessary, we do it if + * PREREAD_ACTIVE is set, else we set DELAYED which will send it to the delayed queue. + * HANDLE gets cleared if stripe_handle leave nothing locked. + */ + + +struct disk_info { + mdk_rdev_t *rdev; +}; + +struct raid5_private_data { + struct hlist_head *stripe_hashtbl; + mddev_t *mddev; + struct disk_info *spare; + int chunk_size, level, algorithm; + int max_degraded; + int raid_disks; + int max_nr_stripes; + + /* reshape_progress is the leading edge of a 'reshape' + * It has value MaxSector when no reshape is happening + * If delta_disks < 0, it is the last sector we started work on, + * else is it the next sector to work on. + */ + sector_t reshape_progress; + /* reshape_safe is the trailing edge of a reshape. We know that + * before (or after) this address, all reshape has completed. + */ + sector_t reshape_safe; + int previous_raid_disks; + int prev_chunk, prev_algo; + short generation; /* increments with every reshape */ + unsigned long reshape_checkpoint; /* Time we last updated + * metadata */ + + struct list_head handle_list; /* stripes needing handling */ + struct list_head hold_list; /* preread ready stripes */ + struct list_head delayed_list; /* stripes that have plugged requests */ + struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */ + struct bio *retry_read_aligned; /* currently retrying aligned bios */ + struct bio *retry_read_aligned_list; /* aligned bios retry list */ + atomic_t preread_active_stripes; /* stripes with scheduled io */ + atomic_t active_aligned_reads; + atomic_t pending_full_writes; /* full write backlog */ + int bypass_count; /* bypassed prereads */ + int bypass_threshold; /* preread nice */ + struct list_head *last_hold; /* detect hold_list promotions */ + + atomic_t reshape_stripes; /* stripes with pending writes for reshape */ + /* unfortunately we need two cache names as we temporarily have + * two caches. + */ + int active_name; + char cache_name[2][20]; + struct kmem_cache *slab_cache; /* for allocating stripes */ + + int seq_flush, seq_write; + int quiesce; + + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + + struct page *spare_page; /* Used when checking P/Q in raid6 */ + + /* + * Free stripes pool + */ + atomic_t active_stripes; + struct list_head inactive_list; + wait_queue_head_t wait_for_stripe; + wait_queue_head_t wait_for_overlap; + int inactive_blocked; /* release of inactive stripes blocked, + * waiting for 25% to be free + */ + int pool_size; /* number of disks in stripeheads in pool */ + spinlock_t device_lock; + struct disk_info *disks; + + /* When taking over an array from a different personality, we store + * the new thread here until we fully activate the array. + */ + struct mdk_thread_s *thread; +}; + +typedef struct raid5_private_data raid5_conf_t; + +#define mddev_to_conf(mddev) ((raid5_conf_t *) mddev->private) + +/* + * Our supported algorithms + */ +#define ALGORITHM_LEFT_ASYMMETRIC 0 /* Rotating Parity N with Data Restart */ +#define ALGORITHM_RIGHT_ASYMMETRIC 1 /* Rotating Parity 0 with Data Restart */ +#define ALGORITHM_LEFT_SYMMETRIC 2 /* Rotating Parity N with Data Continuation */ +#define ALGORITHM_RIGHT_SYMMETRIC 3 /* Rotating Parity 0 with Data Continuation */ + +/* Define non-rotating (raid4) algorithms. These allow + * conversion of raid4 to raid5. + */ +#define ALGORITHM_PARITY_0 4 /* P or P,Q are initial devices */ +#define ALGORITHM_PARITY_N 5 /* P or P,Q are final devices. */ + +/* DDF RAID6 layouts differ from md/raid6 layouts in two ways. + * Firstly, the exact positioning of the parity block is slightly + * different between the 'LEFT_*' modes of md and the "_N_*" modes + * of DDF. + * Secondly, or order of datablocks over which the Q syndrome is computed + * is different. + * Consequently we have different layouts for DDF/raid6 than md/raid6. + * These layouts are from the DDFv1.2 spec. + * Interestingly DDFv1.2-Errata-A does not specify N_CONTINUE but + * leaves RLQ=3 as 'Vendor Specific' + */ + +#define ALGORITHM_ROTATING_ZERO_RESTART 8 /* DDF PRL=6 RLQ=1 */ +#define ALGORITHM_ROTATING_N_RESTART 9 /* DDF PRL=6 RLQ=2 */ +#define ALGORITHM_ROTATING_N_CONTINUE 10 /*DDF PRL=6 RLQ=3 */ + + +/* For every RAID5 algorithm we define a RAID6 algorithm + * with exactly the same layout for data and parity, and + * with the Q block always on the last device (N-1). + * This allows trivial conversion from RAID5 to RAID6 + */ +#define ALGORITHM_LEFT_ASYMMETRIC_6 16 +#define ALGORITHM_RIGHT_ASYMMETRIC_6 17 +#define ALGORITHM_LEFT_SYMMETRIC_6 18 +#define ALGORITHM_RIGHT_SYMMETRIC_6 19 +#define ALGORITHM_PARITY_0_6 20 +#define ALGORITHM_PARITY_N_6 ALGORITHM_PARITY_N + +static inline int algorithm_valid_raid5(int layout) +{ + return (layout >= 0) && + (layout <= 5); +} +static inline int algorithm_valid_raid6(int layout) +{ + return (layout >= 0 && layout <= 5) + || + (layout == 8 || layout == 10) + || + (layout >= 16 && layout <= 20); +} + +static inline int algorithm_is_DDF(int layout) +{ + return layout >= 8 && layout <= 10; +} +#endif diff --git a/drivers/md/raid6.h b/drivers/md/raid6.h deleted file mode 100644 index 98dcde88470e..000000000000 --- a/drivers/md/raid6.h +++ /dev/null @@ -1,130 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2003 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -#ifndef LINUX_RAID_RAID6_H -#define LINUX_RAID_RAID6_H - -#ifdef __KERNEL__ - -/* Set to 1 to use kernel-wide empty_zero_page */ -#define RAID6_USE_EMPTY_ZERO_PAGE 0 - -#include <linux/raid/md.h> -#include <linux/raid/raid5.h> - -typedef raid5_conf_t raid6_conf_t; /* Same configuration */ - -/* Additional compute_parity mode -- updates the parity w/o LOCKING */ -#define UPDATE_PARITY 4 - -/* We need a pre-zeroed page... if we don't want to use the kernel-provided - one define it here */ -#if RAID6_USE_EMPTY_ZERO_PAGE -# define raid6_empty_zero_page empty_zero_page -#else -extern const char raid6_empty_zero_page[PAGE_SIZE]; -#endif - -#else /* ! __KERNEL__ */ -/* Used for testing in user space */ - -#include <errno.h> -#include <inttypes.h> -#include <limits.h> -#include <stddef.h> -#include <sys/mman.h> -#include <sys/types.h> - -/* Not standard, but glibc defines it */ -#define BITS_PER_LONG __WORDSIZE - -typedef uint8_t u8; -typedef uint16_t u16; -typedef uint32_t u32; -typedef uint64_t u64; - -#ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -#endif -extern const char raid6_empty_zero_page[PAGE_SIZE]; - -#define __init -#define __exit -#define __attribute_const__ __attribute__((const)) -#define noinline __attribute__((noinline)) - -#define preempt_enable() -#define preempt_disable() -#define cpu_has_feature(x) 1 -#define enable_kernel_altivec() -#define disable_kernel_altivec() - -#endif /* __KERNEL__ */ - -/* Routine choices */ -struct raid6_calls { - void (*gen_syndrome)(int, size_t, void **); - int (*valid)(void); /* Returns 1 if this routine set is usable */ - const char *name; /* Name of this routine set */ - int prefer; /* Has special performance attribute */ -}; - -/* Selected algorithm */ -extern struct raid6_calls raid6_call; - -/* Algorithm list */ -extern const struct raid6_calls * const raid6_algos[]; -int raid6_select_algo(void); - -/* Return values from chk_syndrome */ -#define RAID6_OK 0 -#define RAID6_P_BAD 1 -#define RAID6_Q_BAD 2 -#define RAID6_PQ_BAD 3 - -/* Galois field tables */ -extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256))); -extern const u8 raid6_gfexp[256] __attribute__((aligned(256))); -extern const u8 raid6_gfinv[256] __attribute__((aligned(256))); -extern const u8 raid6_gfexi[256] __attribute__((aligned(256))); - -/* Recovery routines */ -void raid6_2data_recov(int disks, size_t bytes, int faila, int failb, void **ptrs); -void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs); -void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs); - -/* Some definitions to allow code to be compiled for testing in userspace */ -#ifndef __KERNEL__ - -# define jiffies raid6_jiffies() -# define printk printf -# define GFP_KERNEL 0 -# define __get_free_pages(x,y) ((unsigned long)mmap(NULL, PAGE_SIZE << (y), PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, 0, 0)) -# define free_pages(x,y) munmap((void *)(x), (y)*PAGE_SIZE) - -static inline void cpu_relax(void) -{ - /* Nothing */ -} - -#undef HZ -#define HZ 1000 -static inline uint32_t raid6_jiffies(void) -{ - struct timeval tv; - gettimeofday(&tv, NULL); - return tv.tv_sec*1000 + tv.tv_usec/1000; -} - -#endif /* ! __KERNEL__ */ - -#endif /* LINUX_RAID_RAID6_H */ diff --git a/drivers/md/raid6algos.c b/drivers/md/raid6algos.c index 21987e3dbe6c..866215ac7f25 100644 --- a/drivers/md/raid6algos.c +++ b/drivers/md/raid6algos.c @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -16,13 +16,20 @@ * Algorithm list and algorithm selection for RAID-6 */ -#include "raid6.h" +#include <linux/raid/pq.h> #ifndef __KERNEL__ #include <sys/mman.h> #include <stdio.h> +#else +#if !RAID6_USE_EMPTY_ZERO_PAGE +/* In .bss so it's zeroed */ +const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); +EXPORT_SYMBOL(raid6_empty_zero_page); +#endif #endif struct raid6_calls raid6_call; +EXPORT_SYMBOL_GPL(raid6_call); /* Various routine sets */ extern const struct raid6_calls raid6_intx1; @@ -79,6 +86,7 @@ const struct raid6_calls * const raid6_algos[] = { #else /* Need more time to be stable in userspace */ #define RAID6_TIME_JIFFIES_LG2 9 +#define time_before(x, y) ((x) < (y)) #endif /* Try to pick the best algorithm */ @@ -152,3 +160,12 @@ int __init raid6_select_algo(void) return best ? 0 : -EINVAL; } + +static void raid6_exit(void) +{ + do { } while (0); +} + +subsys_initcall(raid6_select_algo); +module_exit(raid6_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/raid6altivec.uc b/drivers/md/raid6altivec.uc index b9afd35b8812..699dfeee4944 100644 --- a/drivers/md/raid6altivec.uc +++ b/drivers/md/raid6altivec.uc @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -22,7 +22,7 @@ * bracked this with preempt_disable/enable or in a lock) */ -#include "raid6.h" +#include <linux/raid/pq.h> #ifdef CONFIG_ALTIVEC diff --git a/drivers/md/raid6int.uc b/drivers/md/raid6int.uc index ad004cee0e26..f9bf9cba357f 100644 --- a/drivers/md/raid6int.uc +++ b/drivers/md/raid6int.uc @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -18,7 +18,7 @@ * This file is postprocessed using unroll.pl */ -#include "raid6.h" +#include <linux/raid/pq.h> /* * This is the C data type to use diff --git a/drivers/md/raid6mmx.c b/drivers/md/raid6mmx.c index d4e4a1bd70ad..e7f6c13132bf 100644 --- a/drivers/md/raid6mmx.c +++ b/drivers/md/raid6mmx.c @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -18,7 +18,7 @@ #if defined(__i386__) && !defined(__arch_um__) -#include "raid6.h" +#include <linux/raid/pq.h> #include "raid6x86.h" /* Shared with raid6sse1.c */ diff --git a/drivers/md/raid6recov.c b/drivers/md/raid6recov.c index a8c4d9451bd9..2609f00e0d61 100644 --- a/drivers/md/raid6recov.c +++ b/drivers/md/raid6recov.c @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -18,7 +18,7 @@ * the syndrome.) */ -#include "raid6.h" +#include <linux/raid/pq.h> /* Recover two failed data blocks. */ void raid6_2data_recov(int disks, size_t bytes, int faila, int failb, @@ -63,9 +63,7 @@ void raid6_2data_recov(int disks, size_t bytes, int faila, int failb, p++; q++; } } - - - +EXPORT_SYMBOL_GPL(raid6_2data_recov); /* Recover failure of one data block plus the P block */ void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs) @@ -97,9 +95,10 @@ void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs) q++; dq++; } } +EXPORT_SYMBOL_GPL(raid6_datap_recov); - -#ifndef __KERNEL__ /* Testing only */ +#ifndef __KERNEL__ +/* Testing only */ /* Recover two failed blocks. */ void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs) diff --git a/drivers/md/raid6sse1.c b/drivers/md/raid6sse1.c index 0666237276ff..b274dd5eab8f 100644 --- a/drivers/md/raid6sse1.c +++ b/drivers/md/raid6sse1.c @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -23,7 +23,7 @@ #if defined(__i386__) && !defined(__arch_um__) -#include "raid6.h" +#include <linux/raid/pq.h> #include "raid6x86.h" /* Defined in raid6mmx.c */ diff --git a/drivers/md/raid6sse2.c b/drivers/md/raid6sse2.c index b034ad868039..6ed6c6c0389f 100644 --- a/drivers/md/raid6sse2.c +++ b/drivers/md/raid6sse2.c @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ @@ -19,7 +19,7 @@ #if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__) -#include "raid6.h" +#include <linux/raid/pq.h> #include "raid6x86.h" static const struct raid6_sse_constants { diff --git a/drivers/md/raid6test/Makefile b/drivers/md/raid6test/Makefile index 78e0396adf2a..58ffdf4f5161 100644 --- a/drivers/md/raid6test/Makefile +++ b/drivers/md/raid6test/Makefile @@ -5,7 +5,7 @@ CC = gcc OPTFLAGS = -O2 # Adjust as desired -CFLAGS = -I.. -g $(OPTFLAGS) +CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS) LD = ld PERL = perl AR = ar diff --git a/drivers/md/raid6test/test.c b/drivers/md/raid6test/test.c index 559cc41b2585..7a930318b17d 100644 --- a/drivers/md/raid6test/test.c +++ b/drivers/md/raid6test/test.c @@ -17,7 +17,7 @@ #include <stdlib.h> #include <stdio.h> #include <string.h> -#include "raid6.h" +#include <linux/raid/pq.h> #define NDISKS 16 /* Including P and Q */ diff --git a/drivers/md/raid6x86.h b/drivers/md/raid6x86.h index 99fea7a70ca7..4c22c1568558 100644 --- a/drivers/md/raid6x86.h +++ b/drivers/md/raid6x86.h @@ -5,7 +5,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Bostom MA 02111-1307, USA; either version 2 of the License, or + * Boston MA 02111-1307, USA; either version 2 of the License, or * (at your option) any later version; incorporated herein by reference. * * ----------------------------------------------------------------------- */ |