diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/phy/Kconfig | 29 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 3 | ||||
| -rw-r--r-- | drivers/phy/phy-exynos4210-usb2.c | 261 | ||||
| -rw-r--r-- | drivers/phy/phy-exynos4x12-usb2.c | 328 | ||||
| -rw-r--r-- | drivers/phy/phy-samsung-usb2.c | 222 | ||||
| -rw-r--r-- | drivers/phy/phy-samsung-usb2.h | 66 |
6 files changed, 909 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index fde4192cc322..337483653754 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -107,4 +107,33 @@ config PHY_SUN4I_USB This driver controls the entire USB PHY block, both the USB OTG parts, as well as the 2 regular USB 2 host PHYs. +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support for + particular SoCs has to be enabled in addition to this driver. Number + and type of supported phys depends on the SoC. + +config PHY_EXYNOS4210_USB2 + bool "Support for Exynos 4210" + depends on PHY_SAMSUNG_USB2 + depends on CPU_EXYNOS4210 + help + Enable USB PHY support for Exynos 4210. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4210 four + phys are available - device, host, HSIC0 and HSIC1. + +config PHY_EXYNOS4X12_USB2 + bool "Support for Exynos 4x12" + depends on PHY_SAMSUNG_USB2 + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) + help + Enable USB PHY support for Exynos 4x12. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4x12 four + phys are available - device, host, HSIC0 and HSIC1. endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 977a50ead5a4..c4ddd23d6d24 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -12,3 +12,6 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/phy-exynos4210-usb2.c new file mode 100644 index 000000000000..236a52ad94eb --- /dev/null +++ b/drivers/phy/phy-exynos4210-usb2.c @@ -0,0 +1,261 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4210_UPHYPWR 0x0 + +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4210_UPHYCLK 0x4 + +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define EXYNOS_4210_UPHYRST 0x8 + +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) + +/* USBYPHY1 Floating prevention */ +#define EXYNOS_4210_UPHY1CON 0x34 +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4210_MODE_SWITCH_MASK 1 +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4210_MODE_SWITCH_HOST 1 + +enum exynos4210_phy_id { + EXYNOS4210_DEVICE, + EXYNOS4210_HOST, + EXYNOS4210_HSIC0, + EXYNOS4210_HSIC1, + EXYNOS4210_NUM_PHYS, +}; + +/* + * exynos4210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; + mask = EXYNOS_4210_USB_ISOL_DEVICE; + break; + case EXYNOS4210_HOST: + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_4210_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 clk; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + phypwr = EXYNOS_4210_UPHYPWR_PHY0; + rstbits = EXYNOS_4210_URSTCON_PHY0; + break; + case EXYNOS4210_HOST: + phypwr = EXYNOS_4210_UPHYPWR_PHY1; + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | + EXYNOS_4210_URSTCON_PHY1_P0 | + EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_ALL | + EXYNOS_4210_URSTCON_HOST_LINK_P0; + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); + break; + case EXYNOS4210_HSIC0: + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4210_HSIC1: + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P2; + break; + }; + + if (on) { + clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK); + clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK); + + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + } +} + +static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst) +{ + /* Order of initialisation is important - first power then isolation */ + exynos4210_phy_pwr(inst, 1); + exynos4210_isol(inst, 0); + + return 0; +} + +static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst) +{ + exynos4210_isol(inst, 1); + exynos4210_phy_pwr(inst, 0); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + {}, +}; + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +}; diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/phy-exynos4x12-usb2.c new file mode 100644 index 000000000000..d92a7cc5698a --- /dev/null +++ b/drivers/phy/phy-exynos4x12-usb2.c @@ -0,0 +1,328 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4x12_UPHYPWR 0x0 + +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4x12_UPHYCLK 0x4 + +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) + +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) + +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10 +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) + +/* PHY reset control */ +#define EXYNOS_4x12_UPHYRST 0x8 + +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(5) +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(6) +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(8) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(10) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS4x12_DEVICE, + EXYNOS4x12_HOST, + EXYNOS4x12_HSIC0, + EXYNOS4x12_HSIC1, + EXYNOS4x12_NUM_PHYS, +}; + +/* + * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + case EXYNOS4x12_HOST: + offset = EXYNOS_4x12_USB_ISOL_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_OTG; + break; + case EXYNOS4x12_HSIC0: + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC0; + break; + case EXYNOS4x12_HSIC1: + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC1; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 clk; + + clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); + clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); +} + +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 mode = 0; + u32 switch_mode = 0; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; + rstbits = EXYNOS_4x12_URSTCON_PHY0; + mode = EXYNOS_4x12_MODE_SWITCH_DEVICE; + switch_mode = 1; + break; + case EXYNOS4x12_HOST: + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY; + mode = EXYNOS_4x12_MODE_SWITCH_HOST; + switch_mode = 1; + break; + case EXYNOS4x12_HSIC0: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P0 | + EXYNOS_4x12_URSTCON_HOST_PHY; + break; + case EXYNOS4x12_HSIC1: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + }; + + if (on) { + if (switch_mode) + regmap_update_bits(drv->reg_sys, + EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, mode); + + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + } +} + +static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + inst->enabled = 1; + exynos4x12_setup_clk(inst); + exynos4x12_phy_pwr(inst, 1); + exynos4x12_isol(inst, 0); + + /* Power on the device, as it is necessary for HSIC to work */ + if (inst->cfg->id == EXYNOS4x12_HSIC0) { + struct samsung_usb2_phy_instance *device = + &drv->instances[EXYNOS4x12_DEVICE]; + exynos4x12_phy_pwr(device, 1); + exynos4x12_isol(device, 0); + } + + return 0; +} + +static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + struct samsung_usb2_phy_instance *device = + &drv->instances[EXYNOS4x12_DEVICE]; + + inst->enabled = 0; + exynos4x12_isol(inst, 1); + exynos4x12_phy_pwr(inst, 0); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 && !device->enabled) { + exynos4x12_isol(device, 1); + exynos4x12_phy_pwr(device, 0); + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { + { + .label = "device", + .id = EXYNOS4x12_DEVICE, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "host", + .id = EXYNOS4x12_HOST, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4x12_HSIC0, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4x12_HSIC1, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + {}, +}; + +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS4x12_NUM_PHYS, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c new file mode 100644 index 000000000000..c3b771907f18 --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.c @@ -0,0 +1,222 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include "phy-samsung-usb2.h" + +static int samsung_usb2_phy_power_on(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", + inst->cfg->label); + ret = clk_prepare_enable(drv->clk); + if (ret) + goto err_main_clk; + ret = clk_prepare_enable(drv->ref_clk); + if (ret) + goto err_instance_clk; + if (inst->cfg->power_on) { + spin_lock(&drv->lock); + ret = inst->cfg->power_on(inst); + spin_unlock(&drv->lock); + } + + return 0; + +err_instance_clk: + clk_disable_unprepare(drv->clk); +err_main_clk: + return ret; +} + +static int samsung_usb2_phy_power_off(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret = 0; + + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", + inst->cfg->label); + if (inst->cfg->power_off) { + spin_lock(&drv->lock); + ret = inst->cfg->power_off(inst); + spin_unlock(&drv->lock); + } + clk_disable_unprepare(drv->ref_clk); + clk_disable_unprepare(drv->clk); + return ret; +} + +static struct phy_ops samsung_usb2_phy_ops = { + .power_on = samsung_usb2_phy_power_on, + .power_off = samsung_usb2_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *samsung_usb2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct samsung_usb2_phy_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) + return ERR_PTR(-ENODEV); + + return drv->instances[args->args[0]].phy; +} + +static const struct of_device_id samsung_usb2_phy_of_match[] = { +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos4x12-usb2-phy", + .data = &exynos4x12_usb2_phy_config, + }, +#endif + { }, +}; + +static int samsung_usb2_phy_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct samsung_usb2_phy_config *cfg; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *mem; + struct samsung_usb2_phy_driver *drv; + int i, ret; + + if (!pdev->dev.of_node) { + dev_err(dev, "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node); + if (!match) { + dev_err(dev, "of_match_node() failed\n"); + return -EINVAL; + } + cfg = match->data; + + drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + + cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), + GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dev_set_drvdata(dev, drv); + spin_lock_init(&drv->lock); + + drv->cfg = cfg; + drv->dev = dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_phy = devm_ioremap_resource(dev, mem); + if (IS_ERR(drv->reg_phy)) { + dev_err(dev, "Failed to map register memory (phy)\n"); + return PTR_ERR(drv->reg_phy); + } + + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "samsung,pmureg-phandle"); + if (IS_ERR(drv->reg_pmu)) { + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); + return PTR_ERR(drv->reg_pmu); + } + + if (drv->cfg->has_mode_switch) { + drv->reg_sys = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "samsung,sysreg-phandle"); + if (IS_ERR(drv->reg_sys)) { + dev_err(dev, "Failed to map system registers (via syscon)\n"); + return PTR_ERR(drv->reg_sys); + } + } + + drv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(drv->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(drv->clk); + } + + drv->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(drv->ref_clk)) { + dev_err(dev, "Failed to get reference clock for the phy controller\n"); + return PTR_ERR(drv->ref_clk); + } + + drv->ref_rate = clk_get_rate(drv->ref_clk); + if (drv->cfg->rate_to_clk) { + ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); + if (ret) + return ret; + } + + for (i = 0; i < drv->cfg->num_phys; i++) { + char *label = drv->cfg->phys[i].label; + struct samsung_usb2_phy_instance *p = &drv->instances[i]; + + dev_dbg(dev, "Creating phy \"%s\"\n", label); + p->phy = devm_phy_create(dev, &samsung_usb2_phy_ops, NULL); + if (IS_ERR(p->phy)) { + dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", + label); + return PTR_ERR(p->phy); + } + + p->cfg = &drv->cfg->phys[i]; + p->drv = drv; + phy_set_bus_width(p->phy, 8); + phy_set_drvdata(p->phy, p); + } + + phy_provider = devm_of_phy_provider_register(dev, + samsung_usb2_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(drv->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver samsung_usb2_phy_driver = { + .probe = samsung_usb2_phy_probe, + .driver = { + .of_match_table = samsung_usb2_phy_of_match, + .name = "samsung-usb2-phy", + .owner = THIS_MODULE, + } +}; + +module_platform_driver(samsung_usb2_phy_driver); +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); +MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:samsung-usb2-phy"); diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h new file mode 100644 index 000000000000..51a16016a214 --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.h @@ -0,0 +1,66 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PHY_EXYNOS_USB2_H +#define _PHY_EXYNOS_USB2_H + +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct samsung_usb2_phy_driver; +struct samsung_usb2_phy_instance; +struct samsung_usb2_phy_config; + +struct samsung_usb2_phy_instance { + const struct samsung_usb2_common_phy *cfg; + struct phy *phy; + struct samsung_usb2_phy_driver *drv; + bool enabled; +}; + +struct samsung_usb2_phy_driver { + const struct samsung_usb2_phy_config *cfg; + struct clk *clk; + struct clk *ref_clk; + unsigned long ref_rate; + u32 ref_reg_val; + struct device *dev; + void __iomem *reg_phy; + struct regmap *reg_pmu; + struct regmap *reg_sys; + spinlock_t lock; + struct samsung_usb2_phy_instance instances[0]; +}; + +struct samsung_usb2_common_phy { + int (*power_on)(struct samsung_usb2_phy_instance *); + int (*power_off)(struct samsung_usb2_phy_instance *); + unsigned int id; + char *label; +}; + + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; +}; + +extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; +#endif |