diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
| -rw-r--r-- | drivers/usb/host/xhci.c | 100 |
1 files changed, 91 insertions, 9 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ec8ac1674854..b06d1a53652d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1338,6 +1338,12 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto exit; } + /* Reject urb if endpoint is in soft reset, queue must stay empty */ + if (xhci->devs[slot_id]->eps[ep_index].ep_state & EP_CONFIG_PENDING) { + xhci_warn(xhci, "Can't enqueue URB while ep is in soft reset\n"); + ret = -EINVAL; + } + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) size = urb->number_of_packets; else @@ -2948,23 +2954,36 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, } } -/* Called when clearing halted device. The core should have sent the control +/* Called after clearing a halted device. USB core should have sent the control * message to clear the device halt condition. The host side of the halt should - * already be cleared with a reset endpoint command issued when the STALL tx - * event was received. - * - * Context: in_interrupt + * already be cleared with a reset endpoint command issued immediately when the + * STALL tx event was received. */ void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; + struct usb_device *udev; + struct xhci_virt_device *virt_dev; + struct xhci_virt_ep *virt_ep; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_command *command; + unsigned int ep_index, ep_state; + unsigned long flags; + u32 ep_flag; xhci = hcd_to_xhci(hcd); + udev = (struct usb_device *) ep->hcpriv; + if (!ep->hcpriv) + return; + virt_dev = xhci->devs[udev->slot_id]; + ep_index = xhci_get_endpoint_index(&ep->desc); + virt_ep = &virt_dev->eps[ep_index]; + ep_state = virt_ep->ep_state; /* - * We might need to implement the config ep cmd in xhci 4.8.1 note: + * Implement the config ep command in xhci 4.6.8 additional note: * The Reset Endpoint Command may only be issued to endpoints in the * Halted state. If software wishes reset the Data Toggle or Sequence * Number of an endpoint that isn't in the Halted state, then software @@ -2972,9 +2991,72 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, * for the target endpoint. that is in the Stopped state. */ - /* For now just print debug to follow the situation */ - xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n", - ep->desc.bEndpointAddress); + if (ep_state & SET_DEQ_PENDING || ep_state & EP_RECENTLY_HALTED) { + virt_ep->ep_state &= ~EP_RECENTLY_HALTED; + xhci_dbg(xhci, "ep recently halted, no toggle reset needed\n"); + return; + } + + /* Only interrupt and bulk ep's use Data toggle, USB2 spec 5.5.4-> */ + if (usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_isoc(&ep->desc)) + return; + + ep_flag = xhci_get_endpoint_flag(&ep->desc); + + if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG) + return; + + command = xhci_alloc_command(xhci, true, true, GFP_NOWAIT); + if (!command) { + xhci_err(xhci, "Could not allocate xHCI command structure.\n"); + return; + } + + spin_lock_irqsave(&xhci->lock, flags); + + /* block ringing ep doorbell */ + virt_ep->ep_state |= EP_CONFIG_PENDING; + + /* + * Make sure endpoint ring is empty before resetting the toggle/seq. + * Driver is required to synchronously cancel all transfer request. + * + * xhci 4.6.6 says we can issue a configure endpoint command on a + * running endpoint ring as long as it's idle (queue empty) + */ + + if (!list_empty(&virt_ep->ring->td_list)) { + dev_err(&udev->dev, "EP not empty, refuse reset\n"); + spin_unlock_irqrestore(&xhci->lock, flags); + goto cleanup; + } + + xhci_dbg(xhci, "Reset toggle/seq for slot %d, ep_index: %d\n", + udev->slot_id, ep_index); + + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx); + if (!ctrl_ctx) { + xhci_err(xhci, "Could not get input context, bad type. virt_dev: %p, in_ctx %p\n", + virt_dev, virt_dev->in_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + goto cleanup; + } + xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx, + virt_dev->out_ctx, ctrl_ctx, + ep_flag, ep_flag); + xhci_endpoint_copy(xhci, command->in_ctx, virt_dev->out_ctx, ep_index); + + xhci_queue_configure_endpoint(xhci, command, command->in_ctx->dma, + udev->slot_id, false); + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + wait_for_completion(command->completion); + +cleanup: + virt_ep->ep_state &= ~EP_CONFIG_PENDING; + xhci_free_command(xhci, command); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, |