1 files changed, 33 insertions, 11 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index bdeadc112d29..ddbf32d599cb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 
 int usb_device_supports_lpm(struct usb_device *udev)
 {
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
 	 */
@@ -1031,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -1232,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			queue_delayed_work(system_power_efficient_wq,
 					&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1253,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
@@ -4512,6 +4532,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
 
+	usb_detect_quirks(udev);
+
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
@@ -4710,7 +4732,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (status < 0)
 			goto loop;
 
-		usb_detect_quirks(udev);
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(1000);
 
@@ -5326,9 +5347,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
-	bos = udev->bos;
-	udev->bos = NULL;
-
 	/* Disable LPM and LTM while we reset the device and reinstall the alt
 	 * settings.  Device-initiated LPM settings, and system exit latency
 	 * settings are cleared when the device is reset, so we have to set
@@ -5337,15 +5355,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	ret = usb_unlocked_disable_lpm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 	ret = usb_disable_ltm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
 				__func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 
+	bos = udev->bos;
+	udev->bos = NULL;
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5442,10 +5463,11 @@ done:
 	return 0;
 
 re_enumerate:
-	/* LPM state doesn't matter when we're about to destroy the device. */
-	hub_port_logical_disconnect(parent_hub, port1);
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
+re_enumerate_no_bos:
+	/* LPM state doesn't matter when we're about to destroy the device. */
+	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }