diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c (renamed from drivers/tty/serial/8250/8250.c) | 6 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Makefile | 8 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/xilinx_uartps.c | 2 |
6 files changed, 45 insertions, 12 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c index cf6a5383748a..35f9c96aada9 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -3418,6 +3418,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS #ifndef MODULE /* This module was renamed to 8250_core in 3.7. Keep the old "8250" name * working as well for the module options so we don't break people. We @@ -3432,7 +3433,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); static void __used s8250_options(void) { #undef MODULE_PARAM_PREFIX -#define MODULE_PARAM_PREFIX "8250." +#define MODULE_PARAM_PREFIX "8250_core." module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); @@ -3444,5 +3445,6 @@ static void __used s8250_options(void) #endif } #else -MODULE_ALIAS("8250"); +MODULE_ALIAS("8250_core"); +#endif #endif diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index aa76825229dc..26e3a97ab157 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d #define PCI_VENDOR_ID_WCH 0x4348 +#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 @@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, + /* WCH CH352 2S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH352_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, /* * ASIX devices with FIFO bug */ @@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + /* * Commtech, Inc. Fastcom adapters */ diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 2ef9537bcb2c..80fe91e64a52 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -33,6 +33,23 @@ config SERIAL_8250 Most people will say Y or M here, so that they can use serial mice, modems and similar devices connecting to the standard serial ports. +config SERIAL_8250_DEPRECATED_OPTIONS + bool "Support 8250_core.* kernel options (DEPRECATED)" + depends on SERIAL_8250 + default y + ---help--- + In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to + accept kernel parameters in both forms like 8250_core.nr_uarts=4 and + 8250.nr_uarts=4. We now renamed the module back to 8250, but if + anybody noticed in 3.7 and changed their userspace we still have to + keep the 8350_core.* options around until they revert the changes + they already did. + + If 8250 is built as a module, this adds 8250_core alias instead. + + If you did not notice yet and/or you have userspace from pre-3.7, it + is safe (and recommended) to say N here. + config SERIAL_8250_PNP bool "8250/16550 PNP device support" if EXPERT depends on SERIAL_8250 && PNP diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index a23838a4d535..36d68d054307 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -2,10 +2,10 @@ # Makefile for the 8250 serial device drivers. # -obj-$(CONFIG_SERIAL_8250) += 8250_core.o -8250_core-y := 8250.o -8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +obj-$(CONFIG_SERIAL_8250) += 8250.o +8250-y := 8250_core.o +8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d4a7c241b751..3467462869ce 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -158,7 +158,7 @@ struct atmel_uart_port { }; static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; -static unsigned long atmel_ports_in_use; +static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART); #ifdef SUPPORT_SYSRQ static struct console atmel_console; @@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev) if (ret < 0) /* port id not found in platform data nor device-tree aliases: * auto-enumerate it */ - ret = find_first_zero_bit(&atmel_ports_in_use, - sizeof(atmel_ports_in_use)); + ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART); - if (ret > ATMEL_MAX_UART) { + if (ret >= ATMEL_MAX_UART) { ret = -ENODEV; goto err; } - if (test_and_set_bit(ret, &atmel_ports_in_use)) { + if (test_and_set_bit(ret, atmel_ports_in_use)) { /* port already in use */ ret = -EBUSY; goto err; @@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev) /* "port" is allocated statically, so we shouldn't free it */ - clear_bit(port->line, &atmel_ports_in_use); + clear_bit(port->line, atmel_ports_in_use); clk_put(atmel_port->clk); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index ba451c7209fc..f36bbba1ac8b 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -578,6 +578,8 @@ static int xuartps_startup(struct uart_port *port) /* Receive Timeout register is enabled with value of 10 */ xuartps_writel(10, XUARTPS_RXTOUT_OFFSET); + /* Clear out any pending interrupts before enabling them */ + xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET); /* Set the Interrupt Registers with desired interrupts */ xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY | |