diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-sc18is602.c | 9 | ||||
| -rw-r--r-- | drivers/spi/spi-sprd.c | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-zynq-qspi.c | 9 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 51 |
6 files changed, 55 insertions, 21 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8b161ec4943b..f4481fe48bf0 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -65,7 +65,7 @@ config SPI_ALTERA This is the driver for the Altera SPI Controller. config SPI_ALTERA_CORE - tristate "Altera SPI Controller core code" + tristate "Altera SPI Controller core code" if COMPILE_TEST select REGMAP help "The core code for the Altera SPI Controller" diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 028736687488..fb45e6af6638 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1375,11 +1375,13 @@ poll_mode: ret = spi_register_controller(ctlr); if (ret != 0) { dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); - goto out_free_irq; + goto out_release_dma; } return ret; +out_release_dma: + dspi_release_dma(dspi); out_free_irq: if (dspi->irq) free_irq(dspi->irq, dspi); diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c index 297c512069a5..5d27ee482237 100644 --- a/drivers/spi/spi-sc18is602.c +++ b/drivers/spi/spi-sc18is602.c @@ -174,7 +174,7 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) static int sc18is602_check_transfer(struct spi_device *spi, struct spi_transfer *t, int tlen) { - if (t && t->len + tlen > SC18IS602_BUFSIZ) + if (t && t->len + tlen > SC18IS602_BUFSIZ + 1) return -EINVAL; return 0; @@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master, return status; } +static size_t sc18is602_max_transfer_size(struct spi_device *spi) +{ + return SC18IS602_BUFSIZ; +} + static int sc18is602_setup(struct spi_device *spi) { struct sc18is602 *hw = spi_master_get_devdata(spi->master); @@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client, master->bits_per_word_mask = SPI_BPW_MASK(8); master->setup = sc18is602_setup; master->transfer_one_message = sc18is602_transfer_one; + master->max_transfer_size = sc18is602_max_transfer_size; + master->max_message_size = sc18is602_max_transfer_size; master->dev.of_node = np; master->min_speed_hz = hw->freq / 128; master->max_speed_hz = hw->freq / 4; diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index b41a75749b49..28e70db9bbba 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -1068,6 +1068,7 @@ static const struct of_device_id sprd_spi_of_match[] = { { .compatible = "sprd,sc9860-spi", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, sprd_spi_of_match); static struct platform_driver sprd_spi_driver = { .driver = { diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index 5d8a5ee62fa2..5a3d81c31d04 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -367,7 +367,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi) } /** - * zynq_qspi_setup - Configure the QSPI controller + * zynq_qspi_setup_op - Configure the QSPI controller * @spi: Pointer to the spi_device structure * * Sets the operational mode of QSPI controller for the next QSPI transfer, baud @@ -528,18 +528,17 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master); int err = 0, i; u8 *tmpbuf; - u8 opcode = op->cmd.opcode; dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n", - opcode, op->cmd.buswidth, op->addr.buswidth, + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, op->dummy.buswidth, op->data.buswidth); zynq_qspi_chipselect(mem->spi, true); zynq_qspi_config_op(xqspi, mem->spi); - if (op->cmd.nbytes) { + if (op->cmd.opcode) { reinit_completion(&xqspi->data_completion); - xqspi->txbuf = &opcode; + xqspi->txbuf = (u8 *)&op->cmd.opcode; xqspi->rxbuf = NULL; xqspi->tx_bytes = op->cmd.nbytes; xqspi->rx_bytes = op->cmd.nbytes; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ba425b9c7700..e353b7a9e54e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -47,10 +47,6 @@ static void spidev_release(struct device *dev) { struct spi_device *spi = to_spi_device(dev); - /* spi controllers may cleanup for released devices */ - if (spi->controller->cleanup) - spi->controller->cleanup(spi); - spi_controller_put(spi->controller); kfree(spi->driver_override); kfree(spi); @@ -558,6 +554,12 @@ static int spi_dev_check(struct device *dev, void *data) return 0; } +static void spi_cleanup(struct spi_device *spi) +{ + if (spi->controller->cleanup) + spi->controller->cleanup(spi); +} + /** * spi_add_device - Add spi_device allocated with spi_alloc_device * @spi: spi_device to register @@ -622,11 +624,13 @@ int spi_add_device(struct spi_device *spi) /* Device may be bound to an active driver when this returns */ status = device_add(&spi->dev); - if (status < 0) + if (status < 0) { dev_err(dev, "can't add %s, status %d\n", dev_name(&spi->dev), status); - else + spi_cleanup(spi); + } else { dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev)); + } done: mutex_unlock(&spi_add_lock); @@ -717,7 +721,9 @@ void spi_unregister_device(struct spi_device *spi) if (ACPI_COMPANION(&spi->dev)) acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev)); device_remove_software_node(&spi->dev); - device_unregister(&spi->dev); + device_del(&spi->dev); + spi_cleanup(spi); + put_device(&spi->dev); } EXPORT_SYMBOL_GPL(spi_unregister_device); @@ -814,15 +820,29 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force) if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) { if (!(spi->mode & SPI_NO_CS)) { - if (spi->cs_gpiod) - /* polarity handled by gpiolib */ - gpiod_set_value_cansleep(spi->cs_gpiod, activate); - else + if (spi->cs_gpiod) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) + gpiod_set_value_cansleep(spi->cs_gpiod, !enable); + else + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi->cs_gpiod, activate); + } else { /* * invert the enable line, as active low is * default for SPI. */ gpio_set_value_cansleep(spi->cs_gpio, !enable); + } } /* Some SPI masters need both GPIO CS & slave_select */ if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && @@ -3451,9 +3471,12 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, if (spi->controller->set_cs_timing && !(spi->cs_gpiod || gpio_is_valid(spi->cs_gpio))) { + mutex_lock(&spi->controller->io_mutex); + if (spi->controller->auto_runtime_pm) { status = pm_runtime_get_sync(parent); if (status < 0) { + mutex_unlock(&spi->controller->io_mutex); pm_runtime_put_noidle(parent); dev_err(&spi->controller->dev, "Failed to power device: %d\n", status); @@ -3464,11 +3487,13 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, hold, inactive); pm_runtime_mark_last_busy(parent); pm_runtime_put_autosuspend(parent); - return status; } else { - return spi->controller->set_cs_timing(spi, setup, hold, + status = spi->controller->set_cs_timing(spi, setup, hold, inactive); } + + mutex_unlock(&spi->controller->io_mutex); + return status; } if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) || |