diff options
Diffstat (limited to 'drivers/soc/qcom')
| -rw-r--r-- | drivers/soc/qcom/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/soc/qcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/spm.c | 378 |
3 files changed, 0 insertions, 389 deletions
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index bf42a17a45de..285baa7e474e 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -80,16 +80,6 @@ config QCOM_PDR_HELPERS tristate select QCOM_QMI_HELPERS -config QCOM_PM - bool "Qualcomm Power Management" - depends on ARCH_QCOM && !ARM64 - select ARM_CPU_SUSPEND - select QCOM_SCM - help - QCOM Platform specific power driver to manage cores and L2 low power - modes. It interface with various system drivers to put the cores in - low power modes. - config QCOM_QMI_HELPERS tristate depends on NET diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 5d6b83dc58e8..92cc4232d72c 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o obj-$(CONFIG_QCOM_OCMEM) += ocmem.o obj-$(CONFIG_QCOM_PDR_HELPERS) += pdr_interface.o -obj-$(CONFIG_QCOM_PM) += spm.o obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o qmi_helpers-y += qmi_encdec.o qmi_interface.o obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c deleted file mode 100644 index 8e10e02c6aa5..000000000000 --- a/drivers/soc/qcom/spm.c +++ /dev/null @@ -1,378 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. - * Copyright (c) 2014,2015, Linaro Ltd. - * - * SAW power controller driver - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/qcom_scm.h> - -#include <asm/cpuidle.h> -#include <asm/proc-fns.h> -#include <asm/suspend.h> - -#define MAX_PMIC_DATA 2 -#define MAX_SEQ_DATA 64 -#define SPM_CTL_INDEX 0x7f -#define SPM_CTL_INDEX_SHIFT 4 -#define SPM_CTL_EN BIT(0) - -enum pm_sleep_mode { - PM_SLEEP_MODE_STBY, - PM_SLEEP_MODE_RET, - PM_SLEEP_MODE_SPC, - PM_SLEEP_MODE_PC, - PM_SLEEP_MODE_NR, -}; - -enum spm_reg { - SPM_REG_CFG, - SPM_REG_SPM_CTL, - SPM_REG_DLY, - SPM_REG_PMIC_DLY, - SPM_REG_PMIC_DATA_0, - SPM_REG_PMIC_DATA_1, - SPM_REG_VCTL, - SPM_REG_SEQ_ENTRY, - SPM_REG_SPM_STS, - SPM_REG_PMIC_STS, - SPM_REG_NR, -}; - -struct spm_reg_data { - const u8 *reg_offset; - u32 spm_cfg; - u32 spm_dly; - u32 pmic_dly; - u32 pmic_data[MAX_PMIC_DATA]; - u8 seq[MAX_SEQ_DATA]; - u8 start_index[PM_SLEEP_MODE_NR]; -}; - -struct spm_driver_data { - void __iomem *reg_base; - const struct spm_reg_data *reg_data; -}; - -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = { - [SPM_REG_CFG] = 0x08, - [SPM_REG_SPM_CTL] = 0x30, - [SPM_REG_DLY] = 0x34, - [SPM_REG_SEQ_ENTRY] = 0x80, -}; - -/* SPM register data for 8974, 8084 */ -static const struct spm_reg_data spm_reg_8974_8084_cpu = { - .reg_offset = spm_reg_offset_v2_1, - .spm_cfg = 0x1, - .spm_dly = 0x3C102800, - .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, - 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, - 0x0F }, - .start_index[PM_SLEEP_MODE_STBY] = 0, - .start_index[PM_SLEEP_MODE_SPC] = 3, -}; - -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = { - [SPM_REG_CFG] = 0x08, - [SPM_REG_SPM_CTL] = 0x20, - [SPM_REG_PMIC_DLY] = 0x24, - [SPM_REG_PMIC_DATA_0] = 0x28, - [SPM_REG_PMIC_DATA_1] = 0x2C, - [SPM_REG_SEQ_ENTRY] = 0x80, -}; - -/* SPM register data for 8064 */ -static const struct spm_reg_data spm_reg_8064_cpu = { - .reg_offset = spm_reg_offset_v1_1, - .spm_cfg = 0x1F, - .pmic_dly = 0x02020004, - .pmic_data[0] = 0x0084009C, - .pmic_data[1] = 0x00A4001C, - .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, - 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, - .start_index[PM_SLEEP_MODE_STBY] = 0, - .start_index[PM_SLEEP_MODE_SPC] = 2, -}; - -static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv); - -typedef int (*idle_fn)(void); -static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops); - -static inline void spm_register_write(struct spm_driver_data *drv, - enum spm_reg reg, u32 val) -{ - if (drv->reg_data->reg_offset[reg]) - writel_relaxed(val, drv->reg_base + - drv->reg_data->reg_offset[reg]); -} - -/* Ensure a guaranteed write, before return */ -static inline void spm_register_write_sync(struct spm_driver_data *drv, - enum spm_reg reg, u32 val) -{ - u32 ret; - - if (!drv->reg_data->reg_offset[reg]) - return; - - do { - writel_relaxed(val, drv->reg_base + - drv->reg_data->reg_offset[reg]); - ret = readl_relaxed(drv->reg_base + - drv->reg_data->reg_offset[reg]); - if (ret == val) - break; - cpu_relax(); - } while (1); -} - -static inline u32 spm_register_read(struct spm_driver_data *drv, - enum spm_reg reg) -{ - return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); -} - -static void spm_set_low_power_mode(struct spm_driver_data *drv, - enum pm_sleep_mode mode) -{ - u32 start_index; - u32 ctl_val; - - start_index = drv->reg_data->start_index[mode]; - - ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); - ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); - ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; - ctl_val |= SPM_CTL_EN; - spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); -} - -static int qcom_pm_collapse(unsigned long int unused) -{ - qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON); - - /* - * Returns here only if there was a pending interrupt and we did not - * power down as a result. - */ - return -1; -} - -static int qcom_cpu_spc(void) -{ - int ret; - struct spm_driver_data *drv = __this_cpu_read(cpu_spm_drv); - - spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC); - ret = cpu_suspend(0, qcom_pm_collapse); - /* - * ARM common code executes WFI without calling into our driver and - * if the SPM mode is not reset, then we may accidently power down the - * cpu when we intended only to gate the cpu clock. - * Ensure the state is set to standby before returning. - */ - spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); - - return ret; -} - -static int qcom_idle_enter(unsigned long index) -{ - return __this_cpu_read(qcom_idle_ops)[index](); -} - -static const struct of_device_id qcom_idle_state_match[] __initconst = { - { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc }, - { }, -}; - -static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) -{ - const struct of_device_id *match_id; - struct device_node *state_node; - int i; - int state_count = 1; - idle_fn idle_fns[CPUIDLE_STATE_MAX]; - idle_fn *fns; - cpumask_t mask; - bool use_scm_power_down = false; - - if (!qcom_scm_is_available()) - return -EPROBE_DEFER; - - for (i = 0; ; i++) { - state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); - if (!state_node) - break; - - if (!of_device_is_available(state_node)) - continue; - - if (i == CPUIDLE_STATE_MAX) { - pr_warn("%s: cpuidle states reached max possible\n", - __func__); - break; - } - - match_id = of_match_node(qcom_idle_state_match, state_node); - if (!match_id) - return -ENODEV; - - idle_fns[state_count] = match_id->data; - - /* Check if any of the states allow power down */ - if (match_id->data == qcom_cpu_spc) - use_scm_power_down = true; - - state_count++; - } - - if (state_count == 1) - goto check_spm; - - fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns), - GFP_KERNEL); - if (!fns) - return -ENOMEM; - - for (i = 1; i < state_count; i++) - fns[i] = idle_fns[i]; - - if (use_scm_power_down) { - /* We have atleast one power down mode */ - cpumask_clear(&mask); - cpumask_set_cpu(cpu, &mask); - qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask); - } - - per_cpu(qcom_idle_ops, cpu) = fns; - - /* - * SPM probe for the cpu should have happened by now, if the - * SPM device does not exist, return -ENXIO to indicate that the - * cpu does not support idle states. - */ -check_spm: - return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO; -} - -static const struct cpuidle_ops qcom_cpuidle_ops __initconst = { - .suspend = qcom_idle_enter, - .init = qcom_cpuidle_init, -}; - -CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops); -CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops); - -static struct spm_driver_data *spm_get_drv(struct platform_device *pdev, - int *spm_cpu) -{ - struct spm_driver_data *drv = NULL; - struct device_node *cpu_node, *saw_node; - int cpu; - bool found = 0; - - for_each_possible_cpu(cpu) { - cpu_node = of_cpu_device_node_get(cpu); - if (!cpu_node) - continue; - saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); - found = (saw_node == pdev->dev.of_node); - of_node_put(saw_node); - of_node_put(cpu_node); - if (found) - break; - } - - if (found) { - drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); - if (drv) - *spm_cpu = cpu; - } - - return drv; -} - -static const struct of_device_id spm_match_table[] = { - { .compatible = "qcom,msm8974-saw2-v2.1-cpu", - .data = &spm_reg_8974_8084_cpu }, - { .compatible = "qcom,apq8084-saw2-v2.1-cpu", - .data = &spm_reg_8974_8084_cpu }, - { .compatible = "qcom,apq8064-saw2-v1.1-cpu", - .data = &spm_reg_8064_cpu }, - { }, -}; - -static int spm_dev_probe(struct platform_device *pdev) -{ - struct spm_driver_data *drv; - struct resource *res; - const struct of_device_id *match_id; - void __iomem *addr; - int cpu; - - drv = spm_get_drv(pdev, &cpu); - if (!drv) - return -EINVAL; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - drv->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(drv->reg_base)) - return PTR_ERR(drv->reg_base); - - match_id = of_match_node(spm_match_table, pdev->dev.of_node); - if (!match_id) - return -ENODEV; - - drv->reg_data = match_id->data; - - /* Write the SPM sequences first.. */ - addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; - __iowrite32_copy(addr, drv->reg_data->seq, - ARRAY_SIZE(drv->reg_data->seq) / 4); - - /* - * ..and then the control registers. - * On some SoC if the control registers are written first and if the - * CPU was held in reset, the reset signal could trigger the SPM state - * machine, before the sequences are completely written. - */ - spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); - spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); - spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); - spm_register_write(drv, SPM_REG_PMIC_DATA_0, - drv->reg_data->pmic_data[0]); - spm_register_write(drv, SPM_REG_PMIC_DATA_1, - drv->reg_data->pmic_data[1]); - - /* Set up Standby as the default low power mode */ - spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); - - per_cpu(cpu_spm_drv, cpu) = drv; - - return 0; -} - -static struct platform_driver spm_driver = { - .probe = spm_dev_probe, - .driver = { - .name = "saw", - .of_match_table = spm_match_table, - }, -}; - -builtin_platform_driver(spm_driver); |