diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 72 |
1 files changed, 58 insertions, 14 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 207a43d952fa..56f73682d4bd 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2014 Emulex. All rights reserved. * + * Copyright (C) 2004-2015 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -918,12 +918,16 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) lpfc_cmd = (struct lpfc_scsi_buf *) piocbq->context1; ndlp = lpfc_cmd->rdata->pnode; } else if ((piocbq->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) && - !(piocbq->iocb_flag & LPFC_IO_LIBDFC)) + !(piocbq->iocb_flag & LPFC_IO_LIBDFC)) { ndlp = piocbq->context_un.ndlp; - else if (piocbq->iocb_flag & LPFC_IO_LIBDFC) - ndlp = piocbq->context_un.ndlp; - else + } else if (piocbq->iocb_flag & LPFC_IO_LIBDFC) { + if (piocbq->iocb_flag & LPFC_IO_LOOPBACK) + ndlp = NULL; + else + ndlp = piocbq->context_un.ndlp; + } else { ndlp = piocbq->context1; + } list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list); start_sglq = sglq; @@ -2213,6 +2217,46 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) else mempool_free(pmb, phba->mbox_mem_pool); } + /** + * lpfc_sli4_unreg_rpi_cmpl_clr - mailbox completion handler + * @phba: Pointer to HBA context object. + * @pmb: Pointer to mailbox object. + * + * This function is the unreg rpi mailbox completion handler. It + * frees the memory resources associated with the completed mailbox + * command. An additional refrenece is put on the ndlp to prevent + * lpfc_nlp_release from freeing the rpi bit in the bitmask before + * the unreg mailbox command completes, this routine puts the + * reference back. + * + **/ +void +lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + struct lpfc_vport *vport = pmb->vport; + struct lpfc_nodelist *ndlp; + + ndlp = pmb->context1; + if (pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) { + if (phba->sli_rev == LPFC_SLI_REV4 && + (bf_get(lpfc_sli_intf_if_type, + &phba->sli4_hba.sli_intf) == + LPFC_SLI_INTF_IF_TYPE_2)) { + if (ndlp) { + lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, + "0010 UNREG_LOGIN vpi:%x " + "rpi:%x DID:%x map:%x %p\n", + vport->vpi, ndlp->nlp_rpi, + ndlp->nlp_DID, + ndlp->nlp_usg_map, ndlp); + + lpfc_nlp_put(ndlp); + } + } + } + + mempool_free(pmb, phba->mbox_mem_pool); +} /** * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware @@ -12842,7 +12886,7 @@ lpfc_dual_chute_pci_bar_map(struct lpfc_hba *phba, uint16_t pci_barset) * fails this function will return -ENXIO. **/ int -lpfc_modify_fcp_eq_delay(struct lpfc_hba *phba, uint16_t startq) +lpfc_modify_fcp_eq_delay(struct lpfc_hba *phba, uint32_t startq) { struct lpfc_mbx_modify_eq_delay *eq_delay; LPFC_MBOXQ_t *mbox; @@ -12959,11 +13003,8 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax) bf_set(lpfc_eq_context_size, &eq_create->u.request.context, LPFC_EQE_SIZE); bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1); - /* Calculate delay multiper from maximum interrupt per second */ - if (imax > LPFC_DMULT_CONST) - dmult = 0; - else - dmult = LPFC_DMULT_CONST/imax - 1; + /* don't setup delay multiplier using EQ_CREATE */ + dmult = 0; bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context, dmult); switch (eq->entry_count) { @@ -15662,14 +15703,14 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) struct lpfc_rpi_hdr *rpi_hdr; unsigned long iflag; - max_rpi = phba->sli4_hba.max_cfg_param.max_rpi; - rpi_limit = phba->sli4_hba.next_rpi; - /* * Fetch the next logical rpi. Because this index is logical, * the driver starts at 0 each time. */ spin_lock_irqsave(&phba->hbalock, iflag); + max_rpi = phba->sli4_hba.max_cfg_param.max_rpi; + rpi_limit = phba->sli4_hba.next_rpi; + rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, 0); if (rpi >= rpi_limit) rpi = LPFC_RPI_ALLOC_ERROR; @@ -15678,6 +15719,9 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) phba->sli4_hba.max_cfg_param.rpi_used++; phba->sli4_hba.rpi_count++; } + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "0001 rpi:%x max:%x lim:%x\n", + (int) rpi, max_rpi, rpi_limit); /* * Don't try to allocate more rpi header regions if the device limit |