diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 135 |
1 files changed, 120 insertions, 15 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 195169badb37..ba17a8f740a9 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -68,6 +68,7 @@ static enum cpuhp_state lpfc_cpuhp_state; /* Used when mapping IRQ vectors in a driver centric manner */ static uint32_t lpfc_present_cpu; +static bool lpfc_pldv_detect; static void __lpfc_cpuhp_remove(struct lpfc_hba *phba); static void lpfc_cpuhp_remove(struct lpfc_hba *phba); @@ -662,6 +663,50 @@ lpfc_config_port_post(struct lpfc_hba *phba) } /** + * lpfc_sli4_refresh_params - update driver copy of params. + * @phba: Pointer to HBA context object. + * + * This is called to refresh driver copy of dynamic fields from the + * common_get_sli4_parameters descriptor. + **/ +int +lpfc_sli4_refresh_params(struct lpfc_hba *phba) +{ + LPFC_MBOXQ_t *mboxq; + struct lpfc_mqe *mqe; + struct lpfc_sli4_parameters *mbx_sli4_parameters; + int length, rc; + + mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) + return -ENOMEM; + + mqe = &mboxq->u.mqe; + /* Read the port's SLI4 Config Parameters */ + length = (sizeof(struct lpfc_mbx_get_sli4_parameters) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS, + length, LPFC_SLI4_MBX_EMBED); + + rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); + if (unlikely(rc)) { + mempool_free(mboxq, phba->mbox_mem_pool); + return rc; + } + mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters; + phba->sli4_hba.pc_sli4_params.mi_ver = + bf_get(cfg_mi_ver, mbx_sli4_parameters); + phba->sli4_hba.pc_sli4_params.cmf = + bf_get(cfg_cmf, mbx_sli4_parameters); + phba->sli4_hba.pc_sli4_params.pls = + bf_get(cfg_pvl, mbx_sli4_parameters); + + mempool_free(mboxq, phba->mbox_mem_pool); + return rc; +} + +/** * lpfc_hba_init_link - Initialize the FC link * @phba: pointer to lpfc hba data structure. * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT @@ -1606,6 +1651,11 @@ void lpfc_sli4_offline_eratt(struct lpfc_hba *phba) { spin_lock_irq(&phba->hbalock); + if (phba->link_state == LPFC_HBA_ERROR && + phba->hba_flag & HBA_PCI_ERR) { + spin_unlock_irq(&phba->hbalock); + return; + } phba->link_state = LPFC_HBA_ERROR; spin_unlock_irq(&phba->hbalock); @@ -1945,7 +1995,6 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) if (pci_channel_offline(phba->pcidev)) { lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, "3166 pci channel is offline\n"); - lpfc_sli4_offline_eratt(phba); return; } @@ -3643,6 +3692,7 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) struct lpfc_vport **vports; struct Scsi_Host *shost; int i; + int offline = 0; if (vport->fc_flag & FC_OFFLINE_MODE) return; @@ -3651,6 +3701,8 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) lpfc_linkdown(phba); + offline = pci_channel_offline(phba->pcidev); + /* Issue an unreg_login to all nodes on all vports */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) { @@ -3673,7 +3725,14 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) ndlp->nlp_flag &= ~NLP_NPR_ADISC; spin_unlock_irq(&ndlp->lock); - lpfc_unreg_rpi(vports[i], ndlp); + if (offline) { + spin_lock_irq(&ndlp->lock); + ndlp->nlp_flag &= ~(NLP_UNREG_INP | + NLP_RPI_REGISTERED); + spin_unlock_irq(&ndlp->lock); + } else { + lpfc_unreg_rpi(vports[i], ndlp); + } /* * Whenever an SLI4 port goes offline, free the * RPI. Get a new RPI when the adapter port @@ -3694,12 +3753,16 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) lpfc_disc_state_machine(vports[i], ndlp, NULL, NLP_EVT_DEVICE_RECOVERY); - /* Don't remove the node unless the + /* Don't remove the node unless the node * has been unregistered with the - * transport. If so, let dev_loss - * take care of the node. + * transport, and we're not in recovery + * before dev_loss_tmo triggered. + * Otherwise, let dev_loss take care of + * the node. */ - if (!(ndlp->fc4_xpt_flags & + if (!(ndlp->save_flags & + NLP_IN_RECOV_POST_DEV_LOSS) && + !(ndlp->fc4_xpt_flags & (NVME_XPT_REGD | SCSI_XPT_REGD))) lpfc_disc_state_machine (vports[i], ndlp, @@ -4559,7 +4622,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) /* Template for all vports this physical port creates */ memcpy(&phba->vport_template, &lpfc_template, sizeof(*template)); - phba->vport_template.shost_attrs = lpfc_vport_attrs; + phba->vport_template.shost_groups = lpfc_vport_groups; phba->vport_template.eh_bus_reset_handler = NULL; phba->vport_template.eh_host_reset_handler = NULL; phba->vport_template.vendor_id = 0; @@ -5862,7 +5925,7 @@ lpfc_cmf_timer(struct hrtimer *timer) uint32_t io_cnt; uint32_t head, tail; uint32_t busy, max_read; - uint64_t total, rcv, lat, mbpi; + uint64_t total, rcv, lat, mbpi, extra; int timer_interval = LPFC_CMF_INTERVAL; uint32_t ms; struct lpfc_cgn_stat *cgs; @@ -5929,7 +5992,19 @@ lpfc_cmf_timer(struct hrtimer *timer) phba->hba_flag & HBA_SETUP) { mbpi = phba->cmf_last_sync_bw; phba->cmf_last_sync_bw = 0; - lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total); + extra = 0; + + /* Calculate any extra bytes needed to account for the + * timer accuracy. If we are less than LPFC_CMF_INTERVAL + * add an extra 3% slop factor, equal to LPFC_CMF_INTERVAL + * add an extra 2%. The goal is to equalize total with a + * time > LPFC_CMF_INTERVAL or <= LPFC_CMF_INTERVAL + 1 + */ + if (ms == LPFC_CMF_INTERVAL) + extra = div_u64(total, 50); + else if (ms < LPFC_CMF_INTERVAL) + extra = div_u64(total, 33); + lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total + extra); } else { /* For Monitor mode or link down we want mbpi * to be the full link speed @@ -6428,6 +6503,12 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) "3194 Unable to retrieve supported " "speeds, rc = 0x%x\n", rc); } + rc = lpfc_sli4_refresh_params(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3174 Unable to update pls support, " + "rc x%x\n", rc); + } vports = lpfc_create_vport_work_array(phba); if (vports != NULL) { for (i = 0; i <= phba->max_vports && vports[i] != NULL; @@ -6538,7 +6619,7 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport) /* Cannot find existing Fabric ndlp, so allocate a new one */ ndlp = lpfc_nlp_init(vport, Fabric_DID); if (!ndlp) - return 0; + return NULL; /* Set the node type */ ndlp->nlp_type |= NLP_FABRIC; /* Put ndlp onto node list */ @@ -7358,7 +7439,7 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba) out_disable_device: pci_disable_device(pdev); out_error: - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "1401 Failed to enable pci device\n"); return -ENODEV; } @@ -8401,7 +8482,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) phba->lpfc_stop_port = lpfc_stop_port_s4; break; default: - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "1431 Invalid HBA PCI-device group: 0x%x\n", dev_grp); return -ENODEV; @@ -9333,7 +9414,15 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba) phba->work_status[0], phba->work_status[1]); port_error = -ENODEV; + break; } + + if (lpfc_pldv_detect && + bf_get(lpfc_sli_intf_sli_family, + &phba->sli4_hba.sli_intf) == + LPFC_SLI_INTF_FAMILY_G6) + pci_write_config_byte(phba->pcidev, + LPFC_SLI_INTF, CFG_PLD); break; case LPFC_SLI_INTF_IF_TYPE_1: default: @@ -11541,6 +11630,9 @@ wait: goto out; } + if (bf_get(lpfc_sliport_status_pldv, ®_data)) + lpfc_pldv_detect = true; + if (!port_reset) { /* * Reset the port now @@ -11623,7 +11715,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) /* There is no SLI3 failback for SLI4 devices. */ if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_VALID) { - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2894 SLI_INTF reg contents invalid " "sli_intf reg 0x%x\n", phba->sli4_hba.sli_intf.word0); @@ -13368,8 +13460,6 @@ lpfc_init_congestion_buf(struct lpfc_hba *phba) atomic_set(&phba->cgn_sync_alarm_cnt, 0); atomic_set(&phba->cgn_sync_warn_cnt, 0); - atomic64_set(&phba->cgn_acqe_stat.alarm, 0); - atomic64_set(&phba->cgn_acqe_stat.warn, 0); atomic_set(&phba->cgn_driver_evt_cnt, 0); atomic_set(&phba->cgn_latency_evt_cnt, 0); atomic64_set(&phba->cgn_latency_evt, 0); @@ -14080,6 +14170,10 @@ lpfc_pci_resume_one_s3(struct device *dev_d) return error; } + /* Init cpu_map array */ + lpfc_cpu_map_array_init(phba); + /* Init hba_eq_hdl array */ + lpfc_hba_eq_hdl_array_init(phba); /* Configure and enable interrupt */ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode); if (intr_mode == LPFC_INTR_ERROR) { @@ -15033,14 +15127,17 @@ lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state) lpfc_sli4_prep_dev_for_recover(phba); return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: + phba->hba_flag |= HBA_PCI_ERR; /* Fatal error, prepare for slot reset */ lpfc_sli4_prep_dev_for_reset(phba); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: + phba->hba_flag |= HBA_PCI_ERR; /* Permanent failure, prepare for device down */ lpfc_sli4_prep_dev_for_perm_failure(phba); return PCI_ERS_RESULT_DISCONNECT; default: + phba->hba_flag |= HBA_PCI_ERR; /* Unknown state, prepare and request slot reset */ lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, "2825 Unknown PCI error state: x%x\n", state); @@ -15084,6 +15181,7 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev) pci_restore_state(pdev); + phba->hba_flag &= ~HBA_PCI_ERR; /* * As the new kernel behavior of pci_restore_state() API call clears * device saved_state flag, need to save the restored state again. @@ -15106,6 +15204,7 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; } else phba->intr_mode = intr_mode; + lpfc_cpu_affinity_check(phba, phba->cfg_irq_chann); /* Log the current active interrupt mode */ lpfc_log_intr_mode(phba, phba->intr_mode); @@ -15307,6 +15406,10 @@ lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT; + if (phba->link_state == LPFC_HBA_ERROR && + phba->hba_flag & HBA_IOQ_FLUSH) + return PCI_ERS_RESULT_NEED_RESET; + switch (phba->pci_dev_grp) { case LPFC_PCI_DEV_LP: rc = lpfc_io_error_detected_s3(pdev, state); @@ -15523,6 +15626,8 @@ lpfc_init(void) /* Initialize in case vector mapping is needed */ lpfc_present_cpu = num_present_cpus(); + lpfc_pldv_detect = false; + error = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "lpfc/sli4:online", lpfc_cpu_online, lpfc_cpu_offline); |