1 files changed, 263 insertions, 77 deletions

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index e7fe9c4c85b8..1a65d6514237 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -899,7 +899,8 @@ static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost)
 			 */
 			if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) ||
 			    (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) ||
-			    (iphy->is_in_link_training == true && is_phy_starting(iphy))) {
+			    (iphy->is_in_link_training == true && is_phy_starting(iphy)) ||
+			    (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask)) {
 				is_controller_start_complete = false;
 				break;
 			}
@@ -1666,6 +1667,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
 	/* Default to no SSC operation. */
 	ihost->oem_parameters.controller.do_enable_ssc = false;
 
+	/* Default to short cables on all phys. */
+	ihost->oem_parameters.controller.cable_selection_mask = 0;
+
 	/* Initialize all of the port parameter information to narrow ports. */
 	for (index = 0; index < SCI_MAX_PORTS; index++) {
 		ihost->oem_parameters.ports[index].phy_mask = 0;
@@ -1673,8 +1677,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
 
 	/* Initialize all of the phy parameter information. */
 	for (index = 0; index < SCI_MAX_PHYS; index++) {
-		/* Default to 6G (i.e. Gen 3) for now. */
-		ihost->user_parameters.phys[index].max_speed_generation = 3;
+		/* Default to 3G (i.e. Gen 2). */
+		ihost->user_parameters.phys[index].max_speed_generation =
+			SCIC_SDS_PARM_GEN2_SPEED;
 
 		/* the frequencies cannot be 0 */
 		ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f;
@@ -1694,7 +1699,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
 	ihost->user_parameters.ssp_inactivity_timeout = 5;
 	ihost->user_parameters.stp_max_occupancy_timeout = 5;
 	ihost->user_parameters.ssp_max_occupancy_timeout = 20;
-	ihost->user_parameters.no_outbound_task_timeout = 20;
+	ihost->user_parameters.no_outbound_task_timeout = 2;
 }
 
 static void controller_timeout(unsigned long data)
@@ -1759,7 +1764,7 @@ static enum sci_status sci_controller_construct(struct isci_host *ihost,
 	return sci_controller_reset(ihost);
 }
 
-int sci_oem_parameters_validate(struct sci_oem_params *oem)
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version)
 {
 	int i;
 
@@ -1791,18 +1796,61 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
 	    oem->controller.max_concurr_spin_up < 1)
 		return -EINVAL;
 
+	if (oem->controller.do_enable_ssc) {
+		if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1)
+			return -EINVAL;
+
+		if (version >= ISCI_ROM_VER_1_1) {
+			u8 test = oem->controller.ssc_sata_tx_spread_level;
+
+			switch (test) {
+			case 0:
+			case 2:
+			case 3:
+			case 6:
+			case 7:
+				break;
+			default:
+				return -EINVAL;
+			}
+
+			test = oem->controller.ssc_sas_tx_spread_level;
+			if (oem->controller.ssc_sas_tx_type == 0) {
+				switch (test) {
+				case 0:
+				case 2:
+				case 3:
+					break;
+				default:
+					return -EINVAL;
+				}
+			} else if (oem->controller.ssc_sas_tx_type == 1) {
+				switch (test) {
+				case 0:
+				case 3:
+				case 6:
+					break;
+				default:
+					return -EINVAL;
+				}
+			}
+		}
+	}
+
 	return 0;
 }
 
 static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
 {
 	u32 state = ihost->sm.current_state_id;
+	struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
 
 	if (state == SCIC_RESET ||
 	    state == SCIC_INITIALIZING ||
 	    state == SCIC_INITIALIZED) {
 
-		if (sci_oem_parameters_validate(&ihost->oem_parameters))
+		if (sci_oem_parameters_validate(&ihost->oem_parameters,
+						pci_info->orom->hdr.version))
 			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
 
 		return SCI_SUCCESS;
@@ -1857,6 +1905,31 @@ static void power_control_timeout(unsigned long data)
 		ihost->power_control.phys_waiting--;
 		ihost->power_control.phys_granted_power++;
 		sci_phy_consume_power_handler(iphy);
+
+		if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+			u8 j;
+
+			for (j = 0; j < SCI_MAX_PHYS; j++) {
+				struct isci_phy *requester = ihost->power_control.requesters[j];
+
+				/*
+				 * Search the power_control queue to see if there are other phys
+				 * attached to the same remote device. If found, take all of
+				 * them out of await_sas_power state.
+				 */
+				if (requester != NULL && requester != iphy) {
+					u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr,
+							  iphy->frame_rcvd.iaf.sas_addr,
+							  sizeof(requester->frame_rcvd.iaf.sas_addr));
+
+					if (other == 0) {
+						ihost->power_control.requesters[j] = NULL;
+						ihost->power_control.phys_waiting--;
+						sci_phy_consume_power_handler(requester);
+					}
+				}
+			}
+		}
 	}
 
 	/*
@@ -1891,9 +1964,34 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
 		ihost->power_control.timer_started = true;
 
 	} else {
-		/* Add the phy in the waiting list */
-		ihost->power_control.requesters[iphy->phy_index] = iphy;
-		ihost->power_control.phys_waiting++;
+		/*
+		 * There are phys, attached to the same sas address as this phy, are
+		 * already in READY state, this phy don't need wait.
+		 */
+		u8 i;
+		struct isci_phy *current_phy;
+
+		for (i = 0; i < SCI_MAX_PHYS; i++) {
+			u8 other;
+			current_phy = &ihost->phys[i];
+
+			other = memcmp(current_phy->frame_rcvd.iaf.sas_addr,
+				       iphy->frame_rcvd.iaf.sas_addr,
+				       sizeof(current_phy->frame_rcvd.iaf.sas_addr));
+
+			if (current_phy->sm.current_state_id == SCI_PHY_READY &&
+			    current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS &&
+			    other == 0) {
+				sci_phy_consume_power_handler(iphy);
+				break;
+			}
+		}
+
+		if (i == SCI_MAX_PHYS) {
+			/* Add the phy in the waiting list */
+			ihost->power_control.requesters[iphy->phy_index] = iphy;
+			ihost->power_control.phys_waiting++;
+		}
 	}
 }
 
@@ -1908,162 +2006,250 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost,
 	ihost->power_control.requesters[iphy->phy_index] = NULL;
 }
 
+static int is_long_cable(int phy, unsigned char selection_byte)
+{
+	return !!(selection_byte & (1 << phy));
+}
+
+static int is_medium_cable(int phy, unsigned char selection_byte)
+{
+	return !!(selection_byte & (1 << (phy + 4)));
+}
+
+static enum cable_selections decode_selection_byte(
+	int phy,
+	unsigned char selection_byte)
+{
+	return ((selection_byte & (1 << phy)) ? 1 : 0)
+		+ (selection_byte & (1 << (phy + 4)) ? 2 : 0);
+}
+
+static unsigned char *to_cable_select(struct isci_host *ihost)
+{
+	if (is_cable_select_overridden())
+		return ((unsigned char *)&cable_selection_override)
+			+ ihost->id;
+	else
+		return &ihost->oem_parameters.controller.cable_selection_mask;
+}
+
+enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy)
+{
+	return decode_selection_byte(phy, *to_cable_select(ihost));
+}
+
+char *lookup_cable_names(enum cable_selections selection)
+{
+	static char *cable_names[] = {
+		[short_cable]     = "short",
+		[long_cable]      = "long",
+		[medium_cable]    = "medium",
+		[undefined_cable] = "<undefined, assumed long>" /* bit 0==1 */
+	};
+	return (selection <= undefined_cable) ? cable_names[selection]
+					      : cable_names[undefined_cable];
+}
+
 #define AFE_REGISTER_WRITE_DELAY 10
 
-/* Initialize the AFE for this phy index. We need to read the AFE setup from
- * the OEM parameters
- */
 static void sci_controller_afe_initialization(struct isci_host *ihost)
 {
+	struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
 	const struct sci_oem_params *oem = &ihost->oem_parameters;
 	struct pci_dev *pdev = ihost->pdev;
 	u32 afe_status;
 	u32 phy_id;
+	unsigned char cable_selection_mask = *to_cable_select(ihost);
 
 	/* Clear DFX Status registers */
-	writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0);
+	writel(0x0081000f, &afe->afe_dfx_master_control0);
 	udelay(AFE_REGISTER_WRITE_DELAY);
 
-	if (is_b0(pdev)) {
+	if (is_b0(pdev) || is_c0(pdev) || is_c1(pdev)) {
 		/* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
-		 * Timer, PM Stagger Timer */
-		writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2);
+		 * Timer, PM Stagger Timer
+		 */
+		writel(0x0007FFFF, &afe->afe_pmsn_master_control2);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 	}
 
 	/* Configure bias currents to normal */
 	if (is_a2(pdev))
-		writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control);
+		writel(0x00005A00, &afe->afe_bias_control);
 	else if (is_b0(pdev) || is_c0(pdev))
-		writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control);
+		writel(0x00005F00, &afe->afe_bias_control);
+	else if (is_c1(pdev))
+		writel(0x00005500, &afe->afe_bias_control);
 
 	udelay(AFE_REGISTER_WRITE_DELAY);
 
 	/* Enable PLL */
-	if (is_b0(pdev) || is_c0(pdev))
-		writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0);
-	else
-		writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0);
+	if (is_a2(pdev))
+		writel(0x80040908, &afe->afe_pll_control0);
+	else if (is_b0(pdev) || is_c0(pdev))
+		writel(0x80040A08, &afe->afe_pll_control0);
+	else if (is_c1(pdev)) {
+		writel(0x80000B08, &afe->afe_pll_control0);
+		udelay(AFE_REGISTER_WRITE_DELAY);
+		writel(0x00000B08, &afe->afe_pll_control0);
+		udelay(AFE_REGISTER_WRITE_DELAY);
+		writel(0x80000B08, &afe->afe_pll_control0);
+	}
 
 	udelay(AFE_REGISTER_WRITE_DELAY);
 
 	/* Wait for the PLL to lock */
 	do {
-		afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status);
+		afe_status = readl(&afe->afe_common_block_status);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 	} while ((afe_status & 0x00001000) == 0);
 
 	if (is_a2(pdev)) {
-		/* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
-		writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0);
+		/* Shorten SAS SNW lock time (RxLock timer value from 76
+		 * us to 50 us)
+		 */
+		writel(0x7bcc96ad, &afe->afe_pmsn_master_control0);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 	}
 
 	for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
+		struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_id];
 		const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
+		int cable_length_long =
+			is_long_cable(phy_id, cable_selection_mask);
+		int cable_length_medium =
+			is_medium_cable(phy_id, cable_selection_mask);
 
-		if (is_b0(pdev)) {
-			 /* Configure transmitter SSC parameters */
-			writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+		if (is_a2(pdev)) {
+			/* All defaults, except the Receive Word
+			 * Alignament/Comma Detect Enable....(0xe800)
+			 */
+			writel(0x00004512, &xcvr->afe_xcvr_control0);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			writel(0x0050100F, &xcvr->afe_xcvr_control1);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+		} else if (is_b0(pdev)) {
+			/* Configure transmitter SSC parameters */
+			writel(0x00030000, &xcvr->afe_tx_ssc_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 		} else if (is_c0(pdev)) {
-			 /* Configure transmitter SSC parameters */
-			writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+			/* Configure transmitter SSC parameters */
+			writel(0x00010202, &xcvr->afe_tx_ssc_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
-			/*
-			 * All defaults, except the Receive Word Alignament/Comma Detect
-			 * Enable....(0xe800) */
-			writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+			/* All defaults, except the Receive Word
+			 * Alignament/Comma Detect Enable....(0xe800)
+			 */
+			writel(0x00014500, &xcvr->afe_xcvr_control0);
 			udelay(AFE_REGISTER_WRITE_DELAY);
-		} else {
-			/*
-			 * All defaults, except the Receive Word Alignament/Comma Detect
-			 * Enable....(0xe800) */
-			writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+		} else if (is_c1(pdev)) {
+			/* Configure transmitter SSC parameters */
+			writel(0x00010202, &xcvr->afe_tx_ssc_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
-			writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
+			/* All defaults, except the Receive Word
+			 * Alignament/Comma Detect Enable....(0xe800)
+			 */
+			writel(0x0001C500, &xcvr->afe_xcvr_control0);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 		}
 
-		/*
-		 * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
-		 * & increase TX int & ext bias 20%....(0xe85c) */
+		/* Power up TX and RX out from power down (PWRDNTX and
+		 * PWRDNRX) & increase TX int & ext bias 20%....(0xe85c)
+		 */
 		if (is_a2(pdev))
-			writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000003F0, &xcvr->afe_channel_control);
 		else if (is_b0(pdev)) {
-			 /* Power down TX and RX (PWRDNTX and PWRDNRX) */
-			writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000003D7, &xcvr->afe_channel_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
-			/*
-			 * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
-			 * & increase TX int & ext bias 20%....(0xe85c) */
-			writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
-		} else {
-			writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000003D4, &xcvr->afe_channel_control);
+		} else if (is_c0(pdev)) {
+			writel(0x000001E7, &xcvr->afe_channel_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
-			/*
-			 * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
-			 * & increase TX int & ext bias 20%....(0xe85c) */
-			writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000001E4, &xcvr->afe_channel_control);
+		} else if (is_c1(pdev)) {
+			writel(cable_length_long ? 0x000002F7 : 0x000001F7,
+			       &xcvr->afe_channel_control);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			writel(cable_length_long ? 0x000002F4 : 0x000001F4,
+			       &xcvr->afe_channel_control);
 		}
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
 		if (is_a2(pdev)) {
 			/* Enable TX equalization (0xe824) */
-			writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+			writel(0x00040000, &xcvr->afe_tx_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 		}
 
-		/*
-		 * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
-		 * RDD=0x0(RX Detect Enabled) ....(0xe800) */
-		writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+		if (is_a2(pdev) || is_b0(pdev))
+			/* RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0,
+			 * TPD=0x0(TX Power On), RDD=0x0(RX Detect
+			 * Enabled) ....(0xe800)
+			 */
+			writel(0x00004100, &xcvr->afe_xcvr_control0);
+		else if (is_c0(pdev))
+			writel(0x00014100, &xcvr->afe_xcvr_control0);
+		else if (is_c1(pdev))
+			writel(0x0001C100, &xcvr->afe_xcvr_control0);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
 		/* Leave DFE/FFE on */
 		if (is_a2(pdev))
-			writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+			writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
 		else if (is_b0(pdev)) {
-			writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+			writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 			/* Enable TX equalization (0xe824) */
-			writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
-		} else {
-			writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1);
+			writel(0x00040000, &xcvr->afe_tx_control);
+		} else if (is_c0(pdev)) {
+			writel(0x01400C0F, &xcvr->afe_rx_ssc_control1);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			/* Enable TX equalization (0xe824) */
+			writel(0x00040000, &xcvr->afe_tx_control);
+		} else if (is_c1(pdev)) {
+			writel(cable_length_long ? 0x01500C0C :
+			       cable_length_medium ? 0x01400C0D : 0x02400C0D,
+			       &xcvr->afe_xcvr_control1);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			writel(0x000003E0, &xcvr->afe_dfx_rx_control1);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
-			writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+			writel(cable_length_long ? 0x33091C1F :
+			       cable_length_medium ? 0x3315181F : 0x2B17161F,
+			       &xcvr->afe_rx_ssc_control0);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
 			/* Enable TX equalization (0xe824) */
-			writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+			writel(0x00040000, &xcvr->afe_tx_control);
 		}
 
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
-		writel(oem_phy->afe_tx_amp_control0,
-			&ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
+		writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
-		writel(oem_phy->afe_tx_amp_control1,
-			&ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
+		writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
-		writel(oem_phy->afe_tx_amp_control2,
-			&ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
+		writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
-		writel(oem_phy->afe_tx_amp_control3,
-			&ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
+		writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3);
 		udelay(AFE_REGISTER_WRITE_DELAY);
 	}
 
 	/* Transfer control to the PEs */
-	writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0);
+	writel(0x00010f00, &afe->afe_dfx_master_control0);
 	udelay(AFE_REGISTER_WRITE_DELAY);
 }