diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/mt6315-regulator.c | 4 | ||||
| -rw-r--r-- | drivers/regulator/pca9450-regulator.c | 10 | ||||
| -rw-r--r-- | drivers/regulator/qcom-rpmh-regulator.c | 6 | ||||
| -rw-r--r-- | drivers/regulator/rt4831-regulator.c | 4 |
4 files changed, 16 insertions, 8 deletions
diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c index d49a1534d8e9..9edc34981ee0 100644 --- a/drivers/regulator/mt6315-regulator.c +++ b/drivers/regulator/mt6315-regulator.c @@ -41,7 +41,7 @@ struct mt6315_chip { .type = REGULATOR_VOLTAGE, \ .id = _bid, \ .owner = THIS_MODULE, \ - .n_voltages = 0xbf, \ + .n_voltages = 0xc0, \ .linear_ranges = mt_volt_range1, \ .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \ .vsel_reg = _vsel, \ @@ -69,7 +69,7 @@ static unsigned int mt6315_map_mode(u32 mode) case MT6315_BUCK_MODE_LP: return REGULATOR_MODE_IDLE; default: - return -EINVAL; + return REGULATOR_MODE_INVALID; } } diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 833d398c6aa2..2f7ee212cb8c 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */ + ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS, + BUCK123_PRESET_EN); + if (ret) { + dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret); + return ret; + } + /* Set reset behavior on assertion of WDOG_B signal */ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL, WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12); @@ -814,7 +822,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, if (IS_ERR(pca9450->sd_vsel_gpio)) { dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n"); - return ret; + return PTR_ERR(pca9450->sd_vsel_gpio); } dev_info(&i2c->dev, "%s probed.\n", diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 79a554f1029d..65a108c9121f 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -726,8 +726,8 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = { static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { .regulator_type = VRM, .ops = &rpmh_regulator_vrm_ops, - .voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000), - .n_voltages = 5, + .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 235, 16000), + .n_voltages = 236, .pmic_mode_map = pmic_mode_map_pmic5_smps, .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, }; @@ -901,7 +901,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = { }; static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = { - RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps515, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c index 3d4695ded629..e3aaac90d238 100644 --- a/drivers/regulator/rt4831-regulator.c +++ b/drivers/regulator/rt4831-regulator.c @@ -153,9 +153,9 @@ static int rt4831_regulator_probe(struct platform_device *pdev) int i, ret; regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (IS_ERR(regmap)) { + if (!regmap) { dev_err(&pdev->dev, "Failed to init regmap\n"); - return PTR_ERR(regmap); + return -ENODEV; } /* Configure DSV mode to normal by default */ |