diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 27 | ||||
| -rw-r--r-- | drivers/regulator/da9063-regulator.c | 21 | ||||
| -rw-r--r-- | drivers/regulator/fan53555.c | 1 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 12 |
5 files changed, 44 insertions, 19 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 1fd6dc3e8341..4d6d126f1d2b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -243,7 +243,7 @@ config REGULATOR_FAN53555 config REGULATOR_GPIO tristate "GPIO regulator support" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help This driver provides support for regulators that can be controlled via gpios. diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9da5c5559147..c9f72019bd68 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -678,6 +678,8 @@ static int drms_uA_update(struct regulator_dev *rdev) list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; + current_uA += rdev->constraints->system_load; + if (rdev->desc->ops->set_load) { /* set the optimum mode for our new total regulator load */ err = rdev->desc->ops->set_load(rdev, current_uA); @@ -1011,6 +1013,15 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (ret != 0) goto out; + if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { + ret = ops->set_input_current_limit(rdev, + rdev->constraints->ilim_uA); + if (ret < 0) { + rdev_err(rdev, "failed to set input limit\n"); + goto out; + } + } + /* do we need to setup our suspend state */ if (rdev->constraints->initial_state) { ret = suspend_prepare(rdev, rdev->constraints->initial_state); @@ -1054,6 +1065,22 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + if (rdev->constraints->pull_down && ops->set_pull_down) { + ret = ops->set_pull_down(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set pull down\n"); + goto out; + } + } + + if (rdev->constraints->soft_start && ops->set_soft_start) { + ret = ops->set_soft_start(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to set soft start\n"); + goto out; + } + } + print_constraints(rdev); return 0; out: diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 31c2c593ae0b..aed1ad3dc964 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -117,9 +117,6 @@ struct da9063_regulator { /* Encapsulates all information for the regulators driver */ struct da9063_regulators { - int irq_ldo_lim; - int irq_uvov; - unsigned n_regulators; /* Array size to be defined during init. Keep at end. */ struct da9063_regulator regulator[0]; @@ -867,35 +864,23 @@ static int da9063_regulator_probe(struct platform_device *pdev) return irq; } - ret = request_threaded_irq(irq, + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, da9063_ldo_lim_event, IRQF_TRIGGER_LOW | IRQF_ONESHOT, "LDO_LIM", regulators); if (ret) { - dev_err(&pdev->dev, - "Failed to request LDO_LIM IRQ.\n"); - regulators->irq_ldo_lim = -ENXIO; + dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n"); + return ret; } return 0; } -static int da9063_regulator_remove(struct platform_device *pdev) -{ - struct da9063_regulators *regulators = platform_get_drvdata(pdev); - - free_irq(regulators->irq_ldo_lim, regulators); - free_irq(regulators->irq_uvov, regulators); - - return 0; -} - static struct platform_driver da9063_regulator_driver = { .driver = { .name = DA9063_DRVNAME_REGULATORS, }, .probe = da9063_regulator_probe, - .remove = da9063_regulator_remove, }; static int __init da9063_regulator_init(void) diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 3c25db89a021..42865681c00b 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -182,6 +182,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp) static struct regulator_ops fan53555_regulator_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, .map_voltage = regulator_map_voltage_linear, .list_voltage = regulator_list_voltage_linear, .set_suspend_voltage = fan53555_set_suspend_voltage, diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index e952439e0d83..e221cb1ce8ed 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -58,6 +58,10 @@ static void of_get_regulation_constraints(struct device_node *np, if (!of_property_read_u32(np, "regulator-max-microamp", &pval)) constraints->max_uA = pval; + if (!of_property_read_u32(np, "regulator-input-current-limit-microamp", + &pval)) + constraints->ilim_uA = pval; + /* Current change possible? */ if (constraints->min_uA != constraints->max_uA) constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; @@ -67,6 +71,8 @@ static void of_get_regulation_constraints(struct device_node *np, if (!constraints->always_on) /* status change should be possible. */ constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; + constraints->pull_down = of_property_read_bool(np, "regulator-pull-down"); + if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; @@ -82,6 +88,9 @@ static void of_get_regulation_constraints(struct device_node *np, if (!ret) constraints->enable_time = pval; + constraints->soft_start = of_property_read_bool(np, + "regulator-soft-start"); + if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) { if (desc && desc->of_map_mode) { ret = desc->of_map_mode(pval); @@ -95,6 +104,9 @@ static void of_get_regulation_constraints(struct device_node *np, } } + if (!of_property_read_u32(np, "regulator-system-load", &pval)) + constraints->system_load = pval; + for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { switch (i) { case PM_SUSPEND_MEM: |