diff options
Diffstat (limited to 'drivers/power/bq20z75.c')
| -rw-r--r-- | drivers/power/bq20z75.c | 310 |
1 files changed, 263 insertions, 47 deletions
diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c index 492da27e1a47..506585e31a5b 100644 --- a/drivers/power/bq20z75.c +++ b/drivers/power/bq20z75.c @@ -25,6 +25,10 @@ #include <linux/power_supply.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <linux/power/bq20z75.h> enum { REG_MANUFACTURER_DATA, @@ -38,11 +42,22 @@ enum { REG_CYCLE_COUNT, REG_SERIAL_NUMBER, REG_REMAINING_CAPACITY, + REG_REMAINING_CAPACITY_CHARGE, REG_FULL_CHARGE_CAPACITY, + REG_FULL_CHARGE_CAPACITY_CHARGE, REG_DESIGN_CAPACITY, + REG_DESIGN_CAPACITY_CHARGE, REG_DESIGN_VOLTAGE, }; +/* Battery Mode defines */ +#define BATTERY_MODE_OFFSET 0x03 +#define BATTERY_MODE_MASK 0x8000 +enum bq20z75_battery_mode { + BATTERY_MODE_AMPS, + BATTERY_MODE_WATTS +}; + /* manufacturer access defines */ #define MANUFACTURER_ACCESS_STATUS 0x0006 #define MANUFACTURER_ACCESS_SLEEP 0x0011 @@ -78,8 +93,12 @@ static const struct bq20z75_device_data { BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100), [REG_REMAINING_CAPACITY] = BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535), + [REG_REMAINING_CAPACITY_CHARGE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535), [REG_FULL_CHARGE_CAPACITY] = BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535), + [REG_FULL_CHARGE_CAPACITY_CHARGE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535), [REG_TIME_TO_EMPTY] = BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535), @@ -93,6 +112,9 @@ static const struct bq20z75_device_data { [REG_DESIGN_CAPACITY] = BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535), + [REG_DESIGN_CAPACITY_CHARGE] = + BQ20Z75_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, + 65535), [REG_DESIGN_VOLTAGE] = BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535), @@ -117,39 +139,72 @@ static enum power_supply_property bq20z75_properties[] = { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_FULL, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, }; struct bq20z75_info { - struct i2c_client *client; - struct power_supply power_supply; + struct i2c_client *client; + struct power_supply power_supply; + struct bq20z75_platform_data *pdata; + bool is_present; + bool gpio_detect; + bool enable_detection; + int irq; }; static int bq20z75_read_word_data(struct i2c_client *client, u8 address) { - s32 ret; + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); + s32 ret = 0; + int retries = 1; + + if (bq20z75_device->pdata) + retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1); + + while (retries > 0) { + ret = i2c_smbus_read_word_data(client, address); + if (ret >= 0) + break; + retries--; + } - ret = i2c_smbus_read_word_data(client, address); if (ret < 0) { - dev_err(&client->dev, + dev_dbg(&client->dev, "%s: i2c read at address 0x%x failed\n", __func__, address); return ret; } + return le16_to_cpu(ret); } static int bq20z75_write_word_data(struct i2c_client *client, u8 address, u16 value) { - s32 ret; + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); + s32 ret = 0; + int retries = 1; + + if (bq20z75_device->pdata) + retries = max(bq20z75_device->pdata->i2c_retry_count + 1, 1); + + while (retries > 0) { + ret = i2c_smbus_write_word_data(client, address, + le16_to_cpu(value)); + if (ret >= 0) + break; + retries--; + } - ret = i2c_smbus_write_word_data(client, address, le16_to_cpu(value)); if (ret < 0) { - dev_err(&client->dev, + dev_dbg(&client->dev, "%s: i2c write to address 0x%x failed\n", __func__, address); return ret; } + return 0; } @@ -158,6 +213,19 @@ static int bq20z75_get_battery_presence_and_health( union power_supply_propval *val) { s32 ret; + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); + + if (psp == POWER_SUPPLY_PROP_PRESENT && + bq20z75_device->gpio_detect) { + ret = gpio_get_value( + bq20z75_device->pdata->battery_detect); + if (ret == bq20z75_device->pdata->battery_detect_present) + val->intval = 1; + else + val->intval = 0; + bq20z75_device->is_present = val->intval; + return ret; + } /* Write to ManufacturerAccess with * ManufacturerAccess command and then @@ -165,9 +233,11 @@ static int bq20z75_get_battery_presence_and_health( ret = bq20z75_write_word_data(client, bq20z75_data[REG_MANUFACTURER_DATA].addr, MANUFACTURER_ACCESS_STATUS); - if (ret < 0) + if (ret < 0) { + if (psp == POWER_SUPPLY_PROP_PRESENT) + val->intval = 0; /* battery removed */ return ret; - + } ret = bq20z75_read_word_data(client, bq20z75_data[REG_MANUFACTURER_DATA].addr); @@ -248,30 +318,39 @@ static void bq20z75_unit_adjustment(struct i2c_client *client, { #define BASE_UNIT_CONVERSION 1000 #define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION) -#define TIME_UNIT_CONVERSION 600 -#define TEMP_KELVIN_TO_CELCIUS 2731 +#define TIME_UNIT_CONVERSION 60 +#define TEMP_KELVIN_TO_CELSIUS 2731 switch (psp) { case POWER_SUPPLY_PROP_ENERGY_NOW: case POWER_SUPPLY_PROP_ENERGY_FULL: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + /* bq20z75 provides energy in units of 10mWh. + * Convert to µWh + */ val->intval *= BATTERY_MODE_CAP_MULT_WATT; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: val->intval *= BASE_UNIT_CONVERSION; break; case POWER_SUPPLY_PROP_TEMP: - /* bq20z75 provides battery tempreture in 0.1°K - * so convert it to 0.1°C */ - val->intval -= TEMP_KELVIN_TO_CELCIUS; - val->intval *= 10; + /* bq20z75 provides battery temperature in 0.1K + * so convert it to 0.1°C + */ + val->intval -= TEMP_KELVIN_TO_CELSIUS; break; case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + /* bq20z75 provides time to empty and time to full in minutes. + * Convert to seconds + */ val->intval *= TIME_UNIT_CONVERSION; break; @@ -281,11 +360,44 @@ static void bq20z75_unit_adjustment(struct i2c_client *client, } } +static enum bq20z75_battery_mode +bq20z75_set_battery_mode(struct i2c_client *client, + enum bq20z75_battery_mode mode) +{ + int ret, original_val; + + original_val = bq20z75_read_word_data(client, BATTERY_MODE_OFFSET); + if (original_val < 0) + return original_val; + + if ((original_val & BATTERY_MODE_MASK) == mode) + return mode; + + if (mode == BATTERY_MODE_AMPS) + ret = original_val & ~BATTERY_MODE_MASK; + else + ret = original_val | BATTERY_MODE_MASK; + + ret = bq20z75_write_word_data(client, BATTERY_MODE_OFFSET, ret); + if (ret < 0) + return ret; + + return original_val & BATTERY_MODE_MASK; +} + static int bq20z75_get_battery_capacity(struct i2c_client *client, int reg_offset, enum power_supply_property psp, union power_supply_propval *val) { s32 ret; + enum bq20z75_battery_mode mode = BATTERY_MODE_WATTS; + + if (power_supply_is_amp_property(psp)) + mode = BATTERY_MODE_AMPS; + + mode = bq20z75_set_battery_mode(client, mode); + if (mode < 0) + return mode; ret = bq20z75_read_word_data(client, bq20z75_data[reg_offset].addr); if (ret < 0) @@ -298,6 +410,10 @@ static int bq20z75_get_battery_capacity(struct i2c_client *client, } else val->intval = ret; + ret = bq20z75_set_battery_mode(client, mode); + if (ret < 0) + return ret; + return 0; } @@ -318,12 +434,25 @@ static int bq20z75_get_battery_serial_number(struct i2c_client *client, return 0; } +static int bq20z75_get_property_index(struct i2c_client *client, + enum power_supply_property psp) +{ + int count; + for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) + if (psp == bq20z75_data[count].psp) + return count; + + dev_warn(&client->dev, + "%s: Invalid Property - %d\n", __func__, psp); + + return -EINVAL; +} + static int bq20z75_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { - int count; - int ret; + int ret = 0; struct bq20z75_info *bq20z75_device = container_of(psy, struct bq20z75_info, power_supply); struct i2c_client *client = bq20z75_device->client; @@ -332,8 +461,8 @@ static int bq20z75_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_PRESENT: case POWER_SUPPLY_PROP_HEALTH: ret = bq20z75_get_battery_presence_and_health(client, psp, val); - if (ret) - return ret; + if (psp == POWER_SUPPLY_PROP_PRESENT) + return 0; break; case POWER_SUPPLY_PROP_TECHNOLOGY: @@ -343,22 +472,19 @@ static int bq20z75_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_ENERGY_NOW: case POWER_SUPPLY_PROP_ENERGY_FULL: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: case POWER_SUPPLY_PROP_CAPACITY: - for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) { - if (psp == bq20z75_data[count].psp) - break; - } - - ret = bq20z75_get_battery_capacity(client, count, psp, val); - if (ret) - return ret; + ret = bq20z75_get_property_index(client, psp); + if (ret < 0) + break; + ret = bq20z75_get_battery_capacity(client, ret, psp, val); break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = bq20z75_get_battery_serial_number(client, val); - if (ret) - return ret; break; case POWER_SUPPLY_PROP_STATUS: @@ -369,15 +495,11 @@ static int bq20z75_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: - for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) { - if (psp == bq20z75_data[count].psp) - break; - } - - ret = bq20z75_get_battery_property(client, count, psp, val); - if (ret) - return ret; + ret = bq20z75_get_property_index(client, psp); + if (ret < 0) + break; + ret = bq20z75_get_battery_property(client, ret, psp, val); break; default: @@ -386,26 +508,58 @@ static int bq20z75_get_property(struct power_supply *psy, return -EINVAL; } - /* Convert units to match requirements for power supply class */ - bq20z75_unit_adjustment(client, psp, val); + if (!bq20z75_device->enable_detection) + goto done; + + if (!bq20z75_device->gpio_detect && + bq20z75_device->is_present != (ret >= 0)) { + bq20z75_device->is_present = (ret >= 0); + power_supply_changed(&bq20z75_device->power_supply); + } + +done: + if (!ret) { + /* Convert units to match requirements for power supply class */ + bq20z75_unit_adjustment(client, psp, val); + } dev_dbg(&client->dev, - "%s: property = %d, value = %d\n", __func__, psp, val->intval); + "%s: property = %d, value = %x\n", __func__, psp, val->intval); + + if (ret && bq20z75_device->is_present) + return ret; + + /* battery not present, so return NODATA for properties */ + if (ret) + return -ENODATA; return 0; } -static int bq20z75_probe(struct i2c_client *client, +static irqreturn_t bq20z75_irq(int irq, void *devid) +{ + struct power_supply *battery = devid; + + power_supply_changed(battery); + + return IRQ_HANDLED; +} + +static int __devinit bq20z75_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct bq20z75_info *bq20z75_device; + struct bq20z75_platform_data *pdata = client->dev.platform_data; int rc; + int irq; bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL); if (!bq20z75_device) return -ENOMEM; bq20z75_device->client = client; + bq20z75_device->enable_detection = false; + bq20z75_device->gpio_detect = false; bq20z75_device->power_supply.name = "battery"; bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY; bq20z75_device->power_supply.properties = bq20z75_properties; @@ -413,26 +567,86 @@ static int bq20z75_probe(struct i2c_client *client, ARRAY_SIZE(bq20z75_properties); bq20z75_device->power_supply.get_property = bq20z75_get_property; + if (pdata) { + bq20z75_device->gpio_detect = + gpio_is_valid(pdata->battery_detect); + bq20z75_device->pdata = pdata; + } + i2c_set_clientdata(client, bq20z75_device); + if (!bq20z75_device->gpio_detect) + goto skip_gpio; + + rc = gpio_request(pdata->battery_detect, dev_name(&client->dev)); + if (rc) { + dev_warn(&client->dev, "Failed to request gpio: %d\n", rc); + bq20z75_device->gpio_detect = false; + goto skip_gpio; + } + + rc = gpio_direction_input(pdata->battery_detect); + if (rc) { + dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc); + gpio_free(pdata->battery_detect); + bq20z75_device->gpio_detect = false; + goto skip_gpio; + } + + irq = gpio_to_irq(pdata->battery_detect); + if (irq <= 0) { + dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq); + gpio_free(pdata->battery_detect); + bq20z75_device->gpio_detect = false; + goto skip_gpio; + } + + rc = request_irq(irq, bq20z75_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + dev_name(&client->dev), &bq20z75_device->power_supply); + if (rc) { + dev_warn(&client->dev, "Failed to request irq: %d\n", rc); + gpio_free(pdata->battery_detect); + bq20z75_device->gpio_detect = false; + goto skip_gpio; + } + + bq20z75_device->irq = irq; + +skip_gpio: + rc = power_supply_register(&client->dev, &bq20z75_device->power_supply); if (rc) { dev_err(&client->dev, "%s: Failed to register power supply\n", __func__); - kfree(bq20z75_device); - return rc; + goto exit_psupply; } dev_info(&client->dev, "%s: battery gas gauge device registered\n", client->name); return 0; + +exit_psupply: + if (bq20z75_device->irq) + free_irq(bq20z75_device->irq, &bq20z75_device->power_supply); + if (bq20z75_device->gpio_detect) + gpio_free(pdata->battery_detect); + + kfree(bq20z75_device); + + return rc; } -static int bq20z75_remove(struct i2c_client *client) +static int __devexit bq20z75_remove(struct i2c_client *client) { struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); + if (bq20z75_device->irq) + free_irq(bq20z75_device->irq, &bq20z75_device->power_supply); + if (bq20z75_device->gpio_detect) + gpio_free(bq20z75_device->pdata->battery_detect); + power_supply_unregister(&bq20z75_device->power_supply); kfree(bq20z75_device); bq20z75_device = NULL; @@ -444,13 +658,14 @@ static int bq20z75_remove(struct i2c_client *client) static int bq20z75_suspend(struct i2c_client *client, pm_message_t state) { + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client); s32 ret; /* write to manufacturer access with sleep command */ ret = bq20z75_write_word_data(client, bq20z75_data[REG_MANUFACTURER_DATA].addr, MANUFACTURER_ACCESS_SLEEP); - if (ret < 0) + if (bq20z75_device->is_present && ret < 0) return ret; return 0; @@ -465,10 +680,11 @@ static const struct i2c_device_id bq20z75_id[] = { { "bq20z75", 0 }, {} }; +MODULE_DEVICE_TABLE(i2c, bq20z75_id); static struct i2c_driver bq20z75_battery_driver = { .probe = bq20z75_probe, - .remove = bq20z75_remove, + .remove = __devexit_p(bq20z75_remove), .suspend = bq20z75_suspend, .resume = bq20z75_resume, .id_table = bq20z75_id, |