diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-scan.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-scan.c | 550 |
1 files changed, 0 insertions, 550 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c deleted file mode 100644 index 521b73b527d3..000000000000 --- a/drivers/net/wireless/iwlegacy/iwl-scan.c +++ /dev/null @@ -1,550 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <linux/export.h> -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-sta.h" -#include "iwl-io.h" -#include "iwl-helpers.h" - -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (20) - -#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) -#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 - -static int iwl_legacy_send_scan_abort(struct iwl_priv *priv) -{ - int ret; - struct iwl_rx_packet *pkt; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .flags = CMD_WANT_SKB, - }; - - /* Exit instantly with error when device is not ready - * to receive scan abort command or it does not perform - * hardware scan currently */ - if (!test_bit(STATUS_READY, &priv->status) || - !test_bit(STATUS_GEO_CONFIGURED, &priv->status) || - !test_bit(STATUS_SCAN_HW, &priv->status) || - test_bit(STATUS_FW_ERROR, &priv->status) || - test_bit(STATUS_EXIT_PENDING, &priv->status)) - return -EIO; - - ret = iwl_legacy_send_cmd_sync(priv, &cmd); - if (ret) - return ret; - - pkt = (struct iwl_rx_packet *)cmd.reply_page; - if (pkt->u.status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", pkt->u.status); - ret = -EIO; - } - - iwl_legacy_free_pages(priv, cmd.reply_page); - return ret; -} - -static void iwl_legacy_complete_scan(struct iwl_priv *priv, bool aborted) -{ - /* check if scan was requested from mac80211 */ - if (priv->scan_request) { - IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n"); - ieee80211_scan_completed(priv->hw, aborted); - } - - priv->scan_vif = NULL; - priv->scan_request = NULL; -} - -void iwl_legacy_force_scan_end(struct iwl_priv *priv) -{ - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n"); - return; - } - - IWL_DEBUG_SCAN(priv, "Forcing scan end\n"); - clear_bit(STATUS_SCANNING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - iwl_legacy_complete_scan(priv, true); -} - -static void iwl_legacy_do_scan_abort(struct iwl_priv *priv) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n"); - return; - } - - if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan abort in progress\n"); - return; - } - - ret = iwl_legacy_send_scan_abort(priv); - if (ret) { - IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); - iwl_legacy_force_scan_end(priv); - } else - IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); -} - -/** - * iwl_scan_cancel - Cancel any currently executing HW scan - */ -int iwl_legacy_scan_cancel(struct iwl_priv *priv) -{ - IWL_DEBUG_SCAN(priv, "Queuing abort scan\n"); - queue_work(priv->workqueue, &priv->abort_scan); - return 0; -} -EXPORT_SYMBOL(iwl_legacy_scan_cancel); - -/** - * iwl_legacy_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - */ -int iwl_legacy_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(ms); - - lockdep_assert_held(&priv->mutex); - - IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n"); - - iwl_legacy_do_scan_abort(priv); - - while (time_before_eq(jiffies, timeout)) { - if (!test_bit(STATUS_SCAN_HW, &priv->status)) - break; - msleep(20); - } - - return test_bit(STATUS_SCAN_HW, &priv->status); -} -EXPORT_SYMBOL(iwl_legacy_scan_cancel_timeout); - -/* Service response to REPLY_SCAN_CMD (0x80) */ -static void iwl_legacy_rx_reply_scan(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanreq_notification *notif = - (struct iwl_scanreq_notification *)pkt->u.raw; - - IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status); -#endif -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static void iwl_legacy_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanstart_notification *notif = - (struct iwl_scanstart_notification *)pkt->u.raw; - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN(priv, "Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - notif->status, notif->beacon_timer); -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static void iwl_legacy_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanresults_notification *notif = - (struct iwl_scanresults_notification *)pkt->u.raw; - - IWL_DEBUG_SCAN(priv, "Scan ch.res: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf); -#endif -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static void iwl_legacy_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - -#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; -#endif - - IWL_DEBUG_SCAN(priv, - "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); - - /* The HW is no longer scanning */ - clear_bit(STATUS_SCAN_HW, &priv->status); - - IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n", - (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", - jiffies_to_msecs(jiffies - priv->scan_start)); - - queue_work(priv->workqueue, &priv->scan_completed); -} - -void iwl_legacy_setup_rx_scan_handlers(struct iwl_priv *priv) -{ - /* scan handlers */ - priv->rx_handlers[REPLY_SCAN_CMD] = iwl_legacy_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = - iwl_legacy_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl_legacy_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl_legacy_rx_scan_complete_notif; -} -EXPORT_SYMBOL(iwl_legacy_setup_rx_scan_handlers); - -inline u16 iwl_legacy_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, - u8 n_probes) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52 + - IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); - else - return IWL_ACTIVE_DWELL_TIME_24 + - IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); -} -EXPORT_SYMBOL(iwl_legacy_get_active_dwell_time); - -u16 iwl_legacy_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, - struct ieee80211_vif *vif) -{ - struct iwl_rxon_context *ctx; - u16 passive = (band == IEEE80211_BAND_2GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - if (iwl_legacy_is_any_associated(priv)) { - /* - * If we're associated, we clamp the maximum passive - * dwell time to be 98% of the smallest beacon interval - * (minus 2 * channel tune time) - */ - for_each_context(priv, ctx) { - u16 value; - - if (!iwl_legacy_is_associated_ctx(ctx)) - continue; - value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0; - if ((value > IWL_PASSIVE_DWELL_BASE) || !value) - value = IWL_PASSIVE_DWELL_BASE; - value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - passive = min(value, passive); - } - } - - return passive; -} -EXPORT_SYMBOL(iwl_legacy_get_passive_dwell_time); - -void iwl_legacy_init_scan_params(struct iwl_priv *priv) -{ - u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1; - if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx; - if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; -} -EXPORT_SYMBOL(iwl_legacy_init_scan_params); - -static int iwl_legacy_scan_initiate(struct iwl_priv *priv, - struct ieee80211_vif *vif) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - if (WARN_ON(!priv->cfg->ops->utils->request_scan)) - return -EOPNOTSUPP; - - cancel_delayed_work(&priv->scan_check); - - if (!iwl_legacy_is_ready_rf(priv)) { - IWL_WARN(priv, "Request scan called when driver not ready.\n"); - return -EIO; - } - - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - IWL_DEBUG_SCAN(priv, - "Multiple concurrent scan requests in parallel.\n"); - return -EBUSY; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n"); - return -EBUSY; - } - - IWL_DEBUG_SCAN(priv, "Starting scan...\n"); - - set_bit(STATUS_SCANNING, &priv->status); - priv->scan_start = jiffies; - - ret = priv->cfg->ops->utils->request_scan(priv, vif); - if (ret) { - clear_bit(STATUS_SCANNING, &priv->status); - return ret; - } - - queue_delayed_work(priv->workqueue, &priv->scan_check, - IWL_SCAN_CHECK_WATCHDOG); - - return 0; -} - -int iwl_legacy_mac_hw_scan(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_scan_request *req) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (req->n_channels == 0) - return -EINVAL; - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - ret = -EAGAIN; - goto out_unlock; - } - - /* mac80211 will only ask for one band at a time */ - priv->scan_request = req; - priv->scan_vif = vif; - priv->scan_band = req->channels[0]->band; - - ret = iwl_legacy_scan_initiate(priv, vif); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - -out_unlock: - mutex_unlock(&priv->mutex); - - return ret; -} -EXPORT_SYMBOL(iwl_legacy_mac_hw_scan); - -static void iwl_legacy_bg_scan_check(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, scan_check.work); - - IWL_DEBUG_SCAN(priv, "Scan check work\n"); - - /* Since we are here firmware does not finish scan and - * most likely is in bad shape, so we don't bother to - * send abort command, just force scan complete to mac80211 */ - mutex_lock(&priv->mutex); - iwl_legacy_force_scan_end(priv); - mutex_unlock(&priv->mutex); -} - -/** - * iwl_legacy_fill_probe_req - fill in all required fields and IE for probe request - */ - -u16 -iwl_legacy_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, - const u8 *ta, const u8 *ies, int ie_len, int left) -{ - int len = 0; - u8 *pos = NULL; - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - memcpy(frame->da, iwlegacy_bcast_addr, ETH_ALEN); - memcpy(frame->sa, ta, ETH_ALEN); - memcpy(frame->bssid, iwlegacy_bcast_addr, ETH_ALEN); - frame->seq_ctrl = 0; - - len += 24; - - /* ...next IE... */ - pos = &frame->u.probe_req.variable[0]; - - /* fill in our indirect SSID IE */ - left -= 2; - if (left < 0) - return 0; - *pos++ = WLAN_EID_SSID; - *pos++ = 0; - - len += 2; - - if (WARN_ON(left < ie_len)) - return len; - - if (ies && ie_len) { - memcpy(pos, ies, ie_len); - len += ie_len; - } - - return (u16)len; -} -EXPORT_SYMBOL(iwl_legacy_fill_probe_req); - -static void iwl_legacy_bg_abort_scan(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); - - IWL_DEBUG_SCAN(priv, "Abort scan work\n"); - - /* We keep scan_check work queued in case when firmware will not - * report back scan completed notification */ - mutex_lock(&priv->mutex); - iwl_legacy_scan_cancel_timeout(priv, 200); - mutex_unlock(&priv->mutex); -} - -static void iwl_legacy_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - bool aborted; - - IWL_DEBUG_SCAN(priv, "Completed scan.\n"); - - cancel_delayed_work(&priv->scan_check); - - mutex_lock(&priv->mutex); - - aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status); - if (aborted) - IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n"); - - if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already completed.\n"); - goto out_settings; - } - - iwl_legacy_complete_scan(priv, aborted); - -out_settings: - /* Can we still talk to firmware ? */ - if (!iwl_legacy_is_ready_rf(priv)) - goto out; - - /* - * We do not commit power settings while scan is pending, - * do it now if the settings changed. - */ - iwl_legacy_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false); - iwl_legacy_set_tx_power(priv, priv->tx_power_next, false); - - priv->cfg->ops->utils->post_scan(priv); - -out: - mutex_unlock(&priv->mutex); -} - -void iwl_legacy_setup_scan_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->scan_completed, iwl_legacy_bg_scan_completed); - INIT_WORK(&priv->abort_scan, iwl_legacy_bg_abort_scan); - INIT_DELAYED_WORK(&priv->scan_check, iwl_legacy_bg_scan_check); -} -EXPORT_SYMBOL(iwl_legacy_setup_scan_deferred_work); - -void iwl_legacy_cancel_scan_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->abort_scan); - cancel_work_sync(&priv->scan_completed); - - if (cancel_delayed_work_sync(&priv->scan_check)) { - mutex_lock(&priv->mutex); - iwl_legacy_force_scan_end(priv); - mutex_unlock(&priv->mutex); - } -} -EXPORT_SYMBOL(iwl_legacy_cancel_scan_deferred_work); |