diff options
Diffstat (limited to 'drivers/net/ixgbe')
24 files changed, 531 insertions, 434 deletions
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 12769b58c2e7..b60b81bc2b15 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index d0f1d9d2c416..fc41329399be 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -627,7 +627,6 @@ out: return 0; } - /** * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure @@ -698,7 +697,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, /* Setup the PHY according to input speed */ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, autoneg_wait_to_complete); - /* Set up MAC */ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); @@ -770,7 +768,6 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) goto no_phy_reset; - hw->phy.ops.reset(hw); } @@ -779,12 +776,9 @@ no_phy_reset: * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests before reset */ - status = ixgbe_disable_pcie_master(hw); - if (status != 0) { - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); - } + ixgbe_disable_pcie_master(hw); +mac_reset_top: /* * Issue global reset to the MAC. This needs to be a SW reset. * If link reset is used, it might reset the MAC when mng is using it @@ -805,6 +799,19 @@ no_phy_reset: hw_dbg(hw, "Reset polling failed to complete.\n"); } + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. We use 1usec since that is + * what is needed for ixgbe_disable_pcie_master(). The second reset + * then clears out any effects of those events. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + udelay(1); + goto mac_reset_top; + } + msleep(50); gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); @@ -824,15 +831,15 @@ no_phy_reset: IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); } + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + /* * Store MAC address from RAR0, clear receive address registers, and * clear the multicast table */ hw->mac.ops.init_rx_addrs(hw); - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - reset_hw_out: if (phy_status) status = phy_status; @@ -849,6 +856,13 @@ reset_hw_out: static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) { u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); rar_high &= ~IXGBE_RAH_VIND_MASK; @@ -868,14 +882,17 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) u32 rar_high; u32 rar_entries = hw->mac.num_rar_entries; - if (rar < rar_entries) { - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); - if (rar_high & IXGBE_RAH_VIND_MASK) { - rar_high &= ~IXGBE_RAH_VIND_MASK; - IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); - } - } else { + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + if (rar_high & IXGBE_RAH_VIND_MASK) { + rar_high &= ~IXGBE_RAH_VIND_MASK; + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); } return 0; @@ -994,13 +1011,12 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module - * over I2C interface through an intermediate phy. + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. * @hw: pointer to hardware structure * @byte_offset: EEPROM byte offset to read * @eeprom_data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) @@ -1179,13 +1195,14 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .set_vmdq = &ixgbe_set_vmdq_82598, .clear_vmdq = &ixgbe_clear_vmdq_82598, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, .clear_vfta = &ixgbe_clear_vfta_82598, .set_vfta = &ixgbe_set_vfta_82598, .fc_enable = &ixgbe_fc_enable_82598, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, }; static struct ixgbe_eeprom_operations eeprom_ops_82598 = { diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index a21f5817685b..5ef968a10d42 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -112,7 +112,8 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) goto setup_sfp_out; /* PHY config will finish before releasing the semaphore */ - ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); if (ret_val != 0) { ret_val = IXGBE_ERR_SWFW_SYNC; goto setup_sfp_out; @@ -329,11 +330,14 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) enum ixgbe_media_type media_type; /* Detect if there is a copper PHY attached. */ - if (hw->phy.type == ixgbe_phy_cu_unknown || - hw->phy.type == ixgbe_phy_tn || - hw->phy.type == ixgbe_phy_aq) { + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + case ixgbe_phy_aq: media_type = ixgbe_media_type_copper; goto out; + default: + break; } switch (hw->device_id) { @@ -354,6 +358,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_CX4: media_type = ixgbe_media_type_cx4; break; + case IXGBE_DEV_ID_82599_T3_LOM: + media_type = ixgbe_media_type_copper; + break; default: media_type = ixgbe_media_type_unknown; break; @@ -411,14 +418,14 @@ static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, return status; } - /** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. - **/ +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); @@ -536,7 +543,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, * Section 73.10.2, we may have to wait up to 500ms if KR is * attempted. 82599 uses the same timing for 10g SFI. */ - for (i = 0; i < 5; i++) { /* Wait for the link partner to also set speed */ msleep(100); @@ -761,7 +767,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, else orig_autoc = autoc; - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { @@ -898,12 +903,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests before reset */ - status = ixgbe_disable_pcie_master(hw); - if (status != 0) { - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); - } + ixgbe_disable_pcie_master(hw); +mac_reset_top: /* * Issue global reset to the MAC. This needs to be a SW reset. * If link reset is used, it might reset the MAC when mng is using it @@ -924,6 +926,19 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) hw_dbg(hw, "Reset polling failed to complete.\n"); } + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. We use 1usec since that is + * what is needed for ixgbe_disable_pcie_master(). The second reset + * then clears out any effects of those events. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + udelay(1); + goto mac_reset_top; + } + msleep(50); /* @@ -951,6 +966,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) } } + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + /* * Store MAC address from RAR0, clear receive address registers, and * clear the multicast table. Also reset num_rar_entries to 128, @@ -959,9 +977,6 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) hw->mac.num_rar_entries = 128; hw->mac.ops.init_rx_addrs(hw); - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - /* Store the permanent SAN mac address */ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); @@ -1733,13 +1748,34 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) * @hw: pointer to hardware structure * * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. **/ -static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + + /* Detect PHY if not unknown - returns success if already detected. */ status = ixgbe_identify_phy_generic(hw); - if (status != 0) - status = ixgbe_identify_sfp_module_generic(hw); + if (status != 0) { + /* 82599 10GBASE-T requires an external PHY */ + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) + goto out; + else + status = ixgbe_identify_sfp_module_generic(hw); + } + + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = 0; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + +out: return status; } @@ -1763,11 +1799,12 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) hw->phy.ops.identify(hw); - if (hw->phy.type == ixgbe_phy_tn || - hw->phy.type == ixgbe_phy_aq || - hw->phy.type == ixgbe_phy_cu_unknown) { + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_aq: + case ixgbe_phy_cu_unknown: hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, - &ext_ability); + &ext_ability); if (ext_ability & MDIO_PMA_EXTABLE_10GBT) physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; if (ext_ability & MDIO_PMA_EXTABLE_1000BT) @@ -1775,6 +1812,8 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) if (ext_ability & MDIO_PMA_EXTABLE_100BTX) physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; goto out; + default: + break; } switch (autoc & IXGBE_AUTOC_LMS_MASK) { @@ -1886,6 +1925,7 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) break; else + /* Use interrupt-safe sleep just in case */ udelay(10); } @@ -1995,7 +2035,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .set_vmdq = &ixgbe_set_vmdq_generic, .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, @@ -2006,6 +2045,9 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .setup_sfp = &ixgbe_setup_sfp_modules_82599, .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, + }; static struct ixgbe_eeprom_operations eeprom_ops_82599 = { diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index ebbda7d15254..a7fb2e00f766 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -46,10 +46,7 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); static void ixgbe_release_eeprom(struct ixgbe_hw *hw); -static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index); -static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index); static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); /** @@ -454,8 +451,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests */ - if (ixgbe_disable_pcie_master(hw) != 0) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + ixgbe_disable_pcie_master(hw); return 0; } @@ -603,7 +599,6 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) ixgbe_shift_out_eeprom_bits(hw, data, 16); ixgbe_standby_eeprom(hw); - msleep(hw->eeprom.semaphore_delay); /* Done with writing - release the EEPROM */ ixgbe_release_eeprom(hw); } @@ -747,10 +742,10 @@ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) { s32 status = 0; - u32 eec = 0; + u32 eec; u32 i; - if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) status = IXGBE_ERR_SWFW_SYNC; if (status == 0) { @@ -773,18 +768,18 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); hw_dbg(hw, "Could not acquire EEPROM grant\n"); - ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); status = IXGBE_ERR_EEPROM; } - } - /* Setup EEPROM for Read/Write */ - if (status == 0) { - /* Clear CS and SK */ - eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); + /* Setup EEPROM for Read/Write */ + if (status == 0) { + /* Clear CS and SK */ + eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + } } return status; } @@ -798,13 +793,10 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_EEPROM; - u32 timeout; + u32 timeout = 2000; u32 i; u32 swsm; - /* Set timeout value based on size of EEPROM */ - timeout = hw->eeprom.word_size + 1; - /* Get SMBI software semaphore between device drivers first */ for (i = 0; i < timeout; i++) { /* @@ -816,7 +808,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) status = 0; break; } - msleep(1); + udelay(50); } /* Now get the semaphore between SW/FW through the SWESMBI bit */ @@ -844,11 +836,14 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) * was not granted because we don't have access to the EEPROM */ if (i >= timeout) { - hw_dbg(hw, "Driver can't access the Eeprom - Semaphore " + hw_dbg(hw, "SWESMBI Software EEPROM semaphore " "not granted.\n"); ixgbe_release_eeprom_semaphore(hw); status = IXGBE_ERR_EEPROM; } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); } return status; @@ -1081,10 +1076,13 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + /* Delay before attempt to obtain semaphore again to allow FW access */ + msleep(hw->eeprom.semaphore_delay); } /** - * ixgbe_calc_eeprom_checksum - Calculates and returns the checksum + * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum * @hw: pointer to hardware structure **/ u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) @@ -1190,7 +1188,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) if (status == 0) { checksum = hw->eeprom.ops.calc_checksum(hw); status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, - checksum); + checksum); } else { hw_dbg(hw, "EEPROM read failed\n"); } @@ -1238,37 +1236,37 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, u32 rar_low, rar_high; u32 rar_entries = hw->mac.num_rar_entries; + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", index); + return IXGBE_ERR_INVALID_ARGUMENT; + } + /* setup VMDq pool selection before this RAR gets enabled */ hw->mac.ops.set_vmdq(hw, index, vmdq); - /* Make sure we are using a valid rar index range */ - if (index < rar_entries) { - /* - * HW expects these in little endian so we reverse the byte - * order from network order (big endian) to little endian - */ - rar_low = ((u32)addr[0] | - ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | - ((u32)addr[3] << 24)); - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); + /* + * HW expects these in little endian so we reverse the byte + * order from network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | + ((u32)addr[3] << 24)); + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); - if (enable_addr != 0) - rar_high |= IXGBE_RAH_AV; + if (enable_addr != 0) + rar_high |= IXGBE_RAH_AV; - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - } else { - hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_RAR_INDEX; - } + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); return 0; } @@ -1286,58 +1284,26 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) u32 rar_entries = hw->mac.num_rar_entries; /* Make sure we are using a valid rar index range */ - if (index < rar_entries) { - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - } else { + if (index >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_RAR_INDEX; + return IXGBE_ERR_INVALID_ARGUMENT; } - /* clear VMDq pool/queue selection for this RAR */ - hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); - - return 0; -} - -/** - * ixgbe_enable_rar - Enable Rx address register - * @hw: pointer to hardware structure - * @index: index into the RAR table - * - * Enables the select receive address register. - **/ -static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index) -{ - u32 rar_high; - + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high |= IXGBE_RAH_AV; + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); -} -/** - * ixgbe_disable_rar - Disable Rx address register - * @hw: pointer to hardware structure - * @index: index into the RAR table - * - * Disables the select receive address register. - **/ -static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index) -{ - u32 rar_high; + /* clear VMDq pool/queue selection for this RAR */ + hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= (~IXGBE_RAH_AV); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + return 0; } /** @@ -1386,7 +1352,6 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) } /* Clear the MTA */ - hw->addr_ctrl.mc_addr_in_rar_count = 0; hw->addr_ctrl.mta_in_use = 0; IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); @@ -1401,105 +1366,6 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) } /** - * ixgbe_add_uc_addr - Adds a secondary unicast address. - * @hw: pointer to hardware structure - * @addr: new address - * - * Adds it to unused receive address register or goes into promiscuous mode. - **/ -static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - u32 rar_entries = hw->mac.num_rar_entries; - u32 rar; - - hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", - addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); - - /* - * Place this address in the RAR if there is room, - * else put the controller into promiscuous mode - */ - if (hw->addr_ctrl.rar_used_count < rar_entries) { - rar = hw->addr_ctrl.rar_used_count - - hw->addr_ctrl.mc_addr_in_rar_count; - hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); - hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); - hw->addr_ctrl.rar_used_count++; - } else { - hw->addr_ctrl.overflow_promisc++; - } - - hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); -} - -/** - * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses - * @hw: pointer to hardware structure - * @netdev: pointer to net device structure - * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. - * - * Drivers using secondary unicast addresses must set user_set_promisc when - * manually putting the device into promiscuous mode. - **/ -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, - struct net_device *netdev) -{ - u32 i; - u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; - u32 uc_addr_in_use; - u32 fctrl; - struct netdev_hw_addr *ha; - - /* - * Clear accounting of old secondary address list, - * don't count RAR[0] - */ - uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1; - hw->addr_ctrl.rar_used_count -= uc_addr_in_use; - hw->addr_ctrl.overflow_promisc = 0; - - /* Zero out the other receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use + 1); - for (i = 0; i < uc_addr_in_use; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0); - } - - /* Add the new addresses */ - netdev_for_each_uc_addr(ha, netdev) { - hw_dbg(hw, " Adding the secondary addresses:\n"); - ixgbe_add_uc_addr(hw, ha->addr, 0); - } - - if (hw->addr_ctrl.overflow_promisc) { - /* enable promisc if not already in overflow or set by user */ - if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { - hw_dbg(hw, " Entering address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl |= IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - hw->addr_ctrl.uc_set_promisc = true; - } - } else { - /* only disable if set by overflow, not by user */ - if ((old_promisc_setting && hw->addr_ctrl.uc_set_promisc) && - !(hw->addr_ctrl.user_set_promisc)) { - hw_dbg(hw, " Leaving address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl &= ~IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - hw->addr_ctrl.uc_set_promisc = false; - } - } - - hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n"); - return 0; -} - -/** * ixgbe_mta_vector - Determines bit-vector in multicast table to set * @hw: pointer to hardware structure * @mc_addr: the multicast address @@ -1550,7 +1416,6 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) u32 vector; u32 vector_bit; u32 vector_reg; - u32 mta_reg; hw->addr_ctrl.mta_in_use++; @@ -1568,9 +1433,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) */ vector_reg = (vector >> 5) & 0x7F; vector_bit = vector & 0x1F; - mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); - mta_reg |= (1 << vector_bit); - IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); + hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); } /** @@ -1596,18 +1459,21 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev); hw->addr_ctrl.mta_in_use = 0; - /* Clear the MTA */ + /* Clear mta_shadow */ hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < hw->mac.mcft_size; i++) - IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - /* Add the new addresses */ + /* Update mta shadow */ netdev_for_each_mc_addr(ha, netdev) { hw_dbg(hw, " Adding the multicast addresses:\n"); ixgbe_set_mta(hw, ha->addr); } /* Enable mta */ + for (i = 0; i < hw->mac.mcft_size; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, + hw->mac.mta_shadow[i]); + if (hw->addr_ctrl.mta_in_use > 0) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); @@ -1624,15 +1490,8 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, **/ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) { - u32 i; - u32 rar_entries = hw->mac.num_rar_entries; struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - if (a->mc_addr_in_rar_count > 0) - for (i = (rar_entries - a->mc_addr_in_rar_count); - i < rar_entries; i++) - ixgbe_enable_rar(hw, i); - if (a->mta_in_use > 0) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); @@ -1648,15 +1507,8 @@ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) **/ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) { - u32 i; - u32 rar_entries = hw->mac.num_rar_entries; struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - if (a->mc_addr_in_rar_count > 0) - for (i = (rar_entries - a->mc_addr_in_rar_count); - i < rar_entries; i++) - ixgbe_disable_rar(hw, i); - if (a->mta_in_use > 0) IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); @@ -1703,7 +1555,9 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) * 2: Tx flow control is enabled (we can send pause frames but * we do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB * 4: Priority Flow Control is enabled. +#endif * other: Invalid. */ switch (hw->fc.current_mode) { @@ -2159,10 +2013,16 @@ out: **/ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) { + struct ixgbe_adapter *adapter = hw->back; u32 i; u32 reg_val; u32 number_of_queues; - s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + s32 status = 0; + u16 dev_status = 0; + + /* Just jump out if bus mastering is already disabled */ + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto out; /* Disable the receive unit by stopping each queue */ number_of_queues = hw->mac.max_rx_queues; @@ -2179,13 +2039,43 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val); for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { - if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) { - status = 0; + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto check_device_status; + udelay(100); + } + + hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + + /* + * Before proceeding, make sure that the PCIe block does not have + * transactions pending. + */ +check_device_status: + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS, + &dev_status); + if (!(dev_status & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) break; - } udelay(100); } + if (i == IXGBE_PCI_MASTER_DISABLE_TIMEOUT) + hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); + else + goto out; + + /* + * Two consecutive resets are required via CTRL.RST per datasheet + * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine + * of this need. The first reset prevents new master requests from + * being issued by our device. We then must wait 1usec for any + * remaining completions from the PCIe bus to trickle in, and then reset + * again to clear out any effects they may have had on our device. + */ + hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + +out: return status; } @@ -2206,6 +2096,10 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) s32 timeout = 200; while (timeout) { + /* + * SW EEPROM semaphore bit is used for access to all + * SW_FW_SYNC/GSSR bits (not just EEPROM) + */ if (ixgbe_get_eeprom_semaphore(hw)) return IXGBE_ERR_SWFW_SYNC; @@ -2223,7 +2117,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) } if (!timeout) { - hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); + hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); return IXGBE_ERR_SWFW_SYNC; } @@ -2427,37 +2321,38 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) u32 mpsar_lo, mpsar_hi; u32 rar_entries = hw->mac.num_rar_entries; - if (rar < rar_entries) { - mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } - if (!mpsar_lo && !mpsar_hi) - goto done; + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { - if (mpsar_lo) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); - mpsar_lo = 0; - } - if (mpsar_hi) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); - mpsar_hi = 0; - } - } else if (vmdq < 32) { - mpsar_lo &= ~(1 << vmdq); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); - } else { - mpsar_hi &= ~(1 << (vmdq - 32)); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); - } + if (!mpsar_lo && !mpsar_hi) + goto done; - /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) - hw->mac.ops.clear_rar(hw, rar); + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); } else { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); } + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); done: return 0; } @@ -2473,18 +2368,20 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) u32 mpsar; u32 rar_entries = hw->mac.num_rar_entries; - if (rar < rar_entries) { - if (vmdq < 32) { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar |= 1 << vmdq; - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); - } else { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - mpsar |= 1 << (vmdq - 32); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); - } - } else { + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); } return 0; } @@ -2497,7 +2394,6 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) { int i; - for (i = 0; i < 128; i++) IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); @@ -2726,12 +2622,21 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) * Reads the links register to determine if link is up and the current speed **/ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) + bool *link_up, bool link_up_wait_to_complete) { - u32 links_reg; + u32 links_reg, links_orig; u32 i; + /* clear the old state */ + links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + + if (links_orig != links_reg) { + hw_dbg(hw, "LINKS changed from %08X to %08X\n", + links_orig, links_reg); + } + if (link_up_wait_to_complete) { for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { if (links_reg & IXGBE_LINKS_UP) { @@ -2754,10 +2659,13 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, IXGBE_LINKS_SPEED_10G_82599) *speed = IXGBE_LINK_SPEED_10GB_FULL; else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_1G_82599) + IXGBE_LINKS_SPEED_1G_82599) *speed = IXGBE_LINK_SPEED_1GB_FULL; - else + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_100_82599) *speed = IXGBE_LINK_SPEED_100_FULL; + else + *speed = IXGBE_LINK_SPEED_UNKNOWN; /* if link is down, zero out the current_mode */ if (*link_up == false) { diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 90cceb4a6317..508f635fc2ca 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -63,8 +63,6 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw); s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, struct net_device *netdev); -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, - struct net_device *netdev); s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c index 13c962efbfc9..c2ee6fcb4e91 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.c +++ b/drivers/net/ixgbe/ixgbe_dcb.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h index e5935114815e..515bc27477f6 100644 --- a/drivers/net/ixgbe/ixgbe_dcb.h +++ b/drivers/net/ixgbe/ixgbe_dcb.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c index 2965edcdac7b..c97cf9160dc0 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h index 0d2a758effce..1e9750c2b46b 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82598.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c index b0d97a98c84d..beaa1c1c1e67 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h index 5b0ca85614d1..0b39ab4ffc70 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.h +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index a977df3fe81b..d7f0024014b1 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 309272f8f103..83511c022926 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index c54a88274d51..27203c87ea14 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h index 65cc8fb14fe7..02a00d2415d9 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ixgbe/ixgbe_fcoe.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index f0d0c5aad2b4..32231ffe0717 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -54,7 +54,8 @@ static const char ixgbe_driver_string[] = #define DRV_VERSION "3.2.9-k2" const char ixgbe_driver_version[] = DRV_VERSION; -static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation."; +static const char ixgbe_copyright[] = + "Copyright (c) 1999-2011 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, @@ -2597,6 +2598,11 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) i--; for (; i >= 0; i--) { + /* free only the irqs that were actually requested */ + if (!adapter->q_vector[i]->rxr_count && + !adapter->q_vector[i]->txr_count) + continue; + free_irq(adapter->msix_entries[i].vector, adapter->q_vector[i]); } @@ -3884,7 +3890,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) * If we're not hot-pluggable SFP+, we just need to configure link * and bring it up. */ - if (hw->phy.type == ixgbe_phy_unknown) + if (hw->phy.type == ixgbe_phy_none) schedule_work(&adapter->sfp_config_module_task); /* enable transmits */ diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c index f215c4c296c4..2acacfa5e375 100644 --- a/drivers/net/ixgbe/ixgbe_mbx.c +++ b/drivers/net/ixgbe/ixgbe_mbx.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h index ada0ce32a7a6..fe6ea81dc7f8 100644 --- a/drivers/net/ixgbe/ixgbe_mbx.h +++ b/drivers/net/ixgbe/ixgbe_mbx.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 8f7123e8fc0a..197230b2d1ac 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -138,17 +138,51 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { + u32 i; + u16 ctrl = 0; + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) + status = ixgbe_identify_phy_generic(hw); + + if (status != 0 || hw->phy.type == ixgbe_phy_none) + goto out; + /* Don't reset PHY if it's shut down due to overtemp. */ if (!hw->phy.reset_if_overtemp && (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) - return 0; + goto out; /* * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY */ - return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, - MDIO_CTRL1_RESET); + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, + MDIO_CTRL1_RESET); + + /* + * Poll for reset bit to self-clear indicating reset is complete. + * Some PHYs could take up to 3 seconds to complete and need about + * 1.7 usec delay after the reset is complete. + */ + for (i = 0; i < 30; i++) { + msleep(100); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, &ctrl); + if (!(ctrl & MDIO_CTRL1_RESET)) { + udelay(2); + break; + } + } + + if (ctrl & MDIO_CTRL1_RESET) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "PHY reset polling failed to complete.\n"); + } + +out: + return status; } /** @@ -171,7 +205,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) status = IXGBE_ERR_SWFW_SYNC; if (status == 0) { @@ -243,7 +277,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, } } - ixgbe_release_swfw_sync(hw, gssr); + hw->mac.ops.release_swfw_sync(hw, gssr); } return status; @@ -269,7 +303,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (ixgbe_acquire_swfw_sync(hw, gssr) != 0) + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) status = IXGBE_ERR_SWFW_SYNC; if (status == 0) { @@ -336,7 +370,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, } } - ixgbe_release_swfw_sync(hw, gssr); + hw->mac.ops.release_swfw_sync(hw, gssr); } return status; @@ -556,11 +590,10 @@ out: } /** - * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns - * the PHY type. + * ixgbe_identify_sfp_module_generic - Identifies SFP modules * @hw: pointer to hardware structure * - * Searches for and indentifies the SFP module. Assings appropriate PHY type. + * Searches for and identifies the SFP module and assigns appropriate PHY type. **/ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) { @@ -581,41 +614,62 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) goto out; } - status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_IDENTIFIER, &identifier); - if (status == IXGBE_ERR_SFP_NOT_PRESENT || status == IXGBE_ERR_I2C) { - status = IXGBE_ERR_SFP_NOT_PRESENT; - hw->phy.sfp_type = ixgbe_sfp_type_not_present; - if (hw->phy.type != ixgbe_phy_nl) { - hw->phy.id = 0; - hw->phy.type = ixgbe_phy_unknown; - } - goto out; - } + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; - if (identifier == IXGBE_SFF_IDENTIFIER_SFP) { - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES, - &comp_codes_1g); - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); - hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY, - &cable_tech); - - /* ID Module - * ========= - * 0 SFP_DA_CU - * 1 SFP_SR - * 2 SFP_LR - * 3 SFP_DA_CORE0 - 82599-specific - * 4 SFP_DA_CORE1 - 82599-specific - * 5 SFP_SR/LR_CORE0 - 82599-specific - * 6 SFP_SR/LR_CORE1 - 82599-specific - * 7 SFP_act_lmt_DA_CORE0 - 82599-specific - * 8 SFP_act_lmt_DA_CORE1 - 82599-specific - * 9 SFP_1g_cu_CORE0 - 82599-specific - * 10 SFP_1g_cu_CORE1 - 82599-specific - */ + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_CABLE_TECHNOLOGY, + &cable_tech); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific + */ if (hw->mac.type == ixgbe_mac_82598EB) { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) hw->phy.sfp_type = ixgbe_sfp_type_da_cu; @@ -647,31 +701,27 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) ixgbe_sfp_type_da_act_lmt_core1; } else { hw->phy.sfp_type = - ixgbe_sfp_type_unknown; + ixgbe_sfp_type_unknown; } - } else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + } else if (comp_codes_10g & + (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { if (hw->bus.lan_id == 0) hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0; else hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - if (hw->bus.lan_id == 0) - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core0; - else - hw->phy.sfp_type = - ixgbe_sfp_type_srlr_core1; - else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) + } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { if (hw->bus.lan_id == 0) hw->phy.sfp_type = ixgbe_sfp_type_1g_cu_core0; else hw->phy.sfp_type = ixgbe_sfp_type_1g_cu_core1; - else + } else { hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } } if (hw->phy.sfp_type != stored_sfp_type) @@ -688,16 +738,33 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) /* Determine PHY vendor */ if (hw->phy.type != ixgbe_phy_nl) { hw->phy.id = identifier; - hw->phy.ops.read_i2c_eeprom(hw, + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE0, &oui_bytes[0]); - hw->phy.ops.read_i2c_eeprom(hw, + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE1, &oui_bytes[1]); - hw->phy.ops.read_i2c_eeprom(hw, + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE2, &oui_bytes[2]); + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + vendor_oui = ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | @@ -707,7 +774,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) case IXGBE_SFF_VENDOR_OUI_TYCO: if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) hw->phy.type = - ixgbe_phy_sfp_passive_tyco; + ixgbe_phy_sfp_passive_tyco; break; case IXGBE_SFF_VENDOR_OUI_FTL: if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) @@ -724,7 +791,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) default: if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) hw->phy.type = - ixgbe_phy_sfp_passive_unknown; + ixgbe_phy_sfp_passive_unknown; else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) hw->phy.type = ixgbe_phy_sfp_active_unknown; @@ -734,7 +801,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) } } - /* All passive DA cables are supported */ + /* Allow any DA cable vendor */ if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | IXGBE_SFF_DA_ACTIVE_CABLE)) { status = 0; @@ -776,15 +843,24 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) out: return status; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + } + return IXGBE_ERR_SFP_NOT_PRESENT; } /** - * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see - * if it supports a given SFP+ module type, if so it returns the offsets to the - * phy init sequence block. + * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence * @hw: pointer to hardware structure * @list_offset: offset to the SFP ID list * @data_offset: offset to the SFP data block + * + * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if + * so it returns the offsets to the phy init sequence block. **/ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, @@ -899,11 +975,22 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { s32 status = 0; - u32 max_retry = 1; + u32 max_retry = 10; u32 retry = 0; + u16 swfw_mask = 0; bool nack = 1; + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + do { + if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto read_byte_out; + } + ixgbe_i2c_start(hw); /* Device Address and write indication */ @@ -946,6 +1033,8 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, break; fail: + ixgbe_release_swfw_sync(hw, swfw_mask); + msleep(100); ixgbe_i2c_bus_clear(hw); retry++; if (retry < max_retry) @@ -955,6 +1044,9 @@ fail: } while (retry < max_retry); + ixgbe_release_swfw_sync(hw, swfw_mask); + +read_byte_out: return status; } @@ -973,6 +1065,17 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, s32 status = 0; u32 max_retry = 1; u32 retry = 0; + u16 swfw_mask = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto write_byte_out; + } do { ixgbe_i2c_start(hw); @@ -1013,6 +1116,9 @@ fail: hw_dbg(hw, "I2C byte write error.\n"); } while (retry < max_retry); + ixgbe_release_swfw_sync(hw, swfw_mask); + +write_byte_out: return status; } @@ -1331,6 +1437,8 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); u32 i; + ixgbe_i2c_start(hw); + ixgbe_set_i2c_data(hw, &i2cctl, 1); for (i = 0; i < 9; i++) { @@ -1345,6 +1453,8 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) udelay(IXGBE_I2C_T_LOW); } + ixgbe_i2c_start(hw); + /* Put the i2c bus back to default state */ ixgbe_i2c_stop(hw); } diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index e2c6b7eac641..2327baf04426 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c index fb4868d0a32d..58c9b45989ff 100644 --- a/drivers/net/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ixgbe/ixgbe_sriov.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_sriov.h b/drivers/net/ixgbe/ixgbe_sriov.h index 49dc14debef7..e7dd029d576a 100644 --- a/drivers/net/ixgbe/ixgbe_sriov.h +++ b/drivers/net/ixgbe/ixgbe_sriov.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index ab65d13969fd..013751db5fc0 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -91,7 +91,7 @@ /* General Receive Control */ #define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ -#define IXGBE_GRC_APME 0x00000002 /* Advanced Power Management Enable */ +#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */ #define IXGBE_VPDDIAG0 0x10204 #define IXGBE_VPDDIAG1 0x10208 @@ -342,7 +342,7 @@ /* Wake Up Control */ #define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */ #define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define IXGBE_WUC_ADVD3WUC 0x00000010 /* D3Cold wake up cap. enable*/ +#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */ /* Wake Up Filter Control */ #define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ @@ -1614,6 +1614,8 @@ #define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt. WWN base exists */ /* PCI Bus Info */ +#define IXGBE_PCI_DEVICE_STATUS 0xAA +#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020 #define IXGBE_PCI_LINK_STATUS 0xB2 #define IXGBE_PCI_DEVICE_CONTROL2 0xC8 #define IXGBE_PCI_LINK_WIDTH 0x3F0 @@ -2242,6 +2244,7 @@ enum ixgbe_mac_type { enum ixgbe_phy_type { ixgbe_phy_unknown = 0, + ixgbe_phy_none, ixgbe_phy_tn, ixgbe_phy_aq, ixgbe_phy_cu_unknown, @@ -2330,32 +2333,31 @@ enum ixgbe_bus_type { /* PCI bus speeds */ enum ixgbe_bus_speed { ixgbe_bus_speed_unknown = 0, - ixgbe_bus_speed_33, - ixgbe_bus_speed_66, - ixgbe_bus_speed_100, - ixgbe_bus_speed_120, - ixgbe_bus_speed_133, - ixgbe_bus_speed_2500, - ixgbe_bus_speed_5000, + ixgbe_bus_speed_33 = 33, + ixgbe_bus_speed_66 = 66, + ixgbe_bus_speed_100 = 100, + ixgbe_bus_speed_120 = 120, + ixgbe_bus_speed_133 = 133, + ixgbe_bus_speed_2500 = 2500, + ixgbe_bus_speed_5000 = 5000, ixgbe_bus_speed_reserved }; /* PCI bus widths */ enum ixgbe_bus_width { ixgbe_bus_width_unknown = 0, - ixgbe_bus_width_pcie_x1, - ixgbe_bus_width_pcie_x2, + ixgbe_bus_width_pcie_x1 = 1, + ixgbe_bus_width_pcie_x2 = 2, ixgbe_bus_width_pcie_x4 = 4, ixgbe_bus_width_pcie_x8 = 8, - ixgbe_bus_width_32, - ixgbe_bus_width_64, + ixgbe_bus_width_32 = 32, + ixgbe_bus_width_64 = 64, ixgbe_bus_width_reserved }; struct ixgbe_addr_filter_info { u32 num_mc_addrs; u32 rar_used_count; - u32 mc_addr_in_rar_count; u32 mta_in_use; u32 overflow_promisc; bool uc_set_promisc; @@ -2493,6 +2495,8 @@ struct ixgbe_mac_operations { s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8); s32 (*setup_sfp)(struct ixgbe_hw *); s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); + s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16); + void (*release_swfw_sync)(struct ixgbe_hw *, u16); /* Link */ void (*disable_tx_laser)(struct ixgbe_hw *); @@ -2515,7 +2519,6 @@ struct ixgbe_mac_operations { s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32); s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32); s32 (*init_rx_addrs)(struct ixgbe_hw *); - s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct net_device *); s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *); s32 (*enable_mc)(struct ixgbe_hw *); s32 (*disable_mc)(struct ixgbe_hw *); @@ -2556,6 +2559,7 @@ struct ixgbe_eeprom_info { u16 address_bits; }; +#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 struct ixgbe_mac_info { struct ixgbe_mac_operations ops; enum ixgbe_mac_type type; @@ -2566,6 +2570,8 @@ struct ixgbe_mac_info { u16 wwnn_prefix; /* prefix for World Wide Port Name (WWPN) */ u16 wwpn_prefix; +#define IXGBE_MAX_MTA 128 + u32 mta_shadow[IXGBE_MAX_MTA]; s32 mc_filter_type; u32 mcft_size; u32 vft_size; @@ -2578,6 +2584,7 @@ struct ixgbe_mac_info { u32 orig_autoc2; bool orig_link_settings_stored; bool autotry_restart; + u8 flags; }; struct ixgbe_phy_info { @@ -2684,7 +2691,6 @@ struct ixgbe_info { #define IXGBE_ERR_EEPROM_VERSION -24 #define IXGBE_ERR_NO_SPACE -25 #define IXGBE_ERR_OVERTEMP -26 -#define IXGBE_ERR_RAR_INDEX -27 #define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 #define IXGBE_ERR_PBA_SECTION -31 #define IXGBE_ERR_INVALID_ARGUMENT -32 diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index f2518b01067d..2e3a2b4fa8b2 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,7 +31,6 @@ #include "ixgbe.h" #include "ixgbe_phy.h" -//#include "ixgbe_mbx.h" #define IXGBE_X540_MAX_TX_QUEUES 128 #define IXGBE_X540_MAX_RX_QUEUES 128 @@ -110,12 +109,9 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests before reset */ - status = ixgbe_disable_pcie_master(hw); - if (status != 0) { - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); - } + ixgbe_disable_pcie_master(hw); +mac_reset_top: /* * Issue global reset to the MAC. Needs to be SW reset if link is up. * If link reset is used when link is up, it might reset the PHY when @@ -148,6 +144,19 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) hw_dbg(hw, "Reset polling failed to complete.\n"); } + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. We use 1usec since that is + * what is needed for ixgbe_disable_pcie_master(). The second reset + * then clears out any effects of those events. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + udelay(1); + goto mac_reset_top; + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; @@ -191,7 +200,7 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) * clear the multicast table. Also reset num_rar_entries to 128, * since we modify this value when programming the SAN MAC address. */ - hw->mac.num_rar_entries = 128; + hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES; hw->mac.ops.init_rx_addrs(hw); /* Store the permanent mac address */ @@ -278,7 +287,7 @@ static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) { s32 status; - if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0) + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) status = ixgbe_read_eerd_generic(hw, offset, data); else status = IXGBE_ERR_SWFW_SYNC; @@ -311,7 +320,7 @@ static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) (data << IXGBE_EEPROM_RW_REG_DATA) | IXGBE_EEPROM_RW_REG_START; - if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0) { + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); if (status != 0) { hw_dbg(hw, "Eeprom write EEWR timed out\n"); @@ -676,7 +685,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .set_vmdq = &ixgbe_set_vmdq_generic, .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, @@ -687,6 +695,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .setup_sfp = NULL, .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, }; static struct ixgbe_eeprom_operations eeprom_ops_X540 = { @@ -702,7 +712,7 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .identify = &ixgbe_identify_phy_generic, .identify_sfp = &ixgbe_identify_sfp_module_generic, .init = NULL, - .reset = &ixgbe_reset_phy_generic, + .reset = NULL, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, |