diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 110 |
1 files changed, 59 insertions, 51 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index e4f446db0ca1..a6a0321a8931 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -193,6 +193,11 @@ int ksz9477_reset_switch(struct ksz_device *dev) ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); + /* KSZ9893 compatible chips do not support refclk configuration */ + if (dev->chip_id == KSZ9893_CHIP_ID || + dev->chip_id == KSZ8563_CHIP_ID) + return 0; + data8 = SW_ENABLE_REFCLKO; if (dev->synclko_disable) data8 = 0; @@ -264,9 +269,20 @@ void ksz9477_port_init_cnt(struct ksz_device *dev, int port) mutex_unlock(&mib->cnt_mutex); } -void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) +static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg, + u16 *data) +{ + /* KSZ8563R do not have extended registers but BMSR_ESTATEN and + * BMSR_ERCAP bits are set. + */ + if (dev->chip_id == KSZ8563_CHIP_ID && reg == MII_BMSR) + *data &= ~(BMSR_ESTATEN | BMSR_ERCAP); +} + +int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) { u16 val = 0xffff; + int ret; /* No real PHY after this. Simulate the PHY. * A fixed PHY can be setup in the device tree, but this function is @@ -274,7 +290,7 @@ void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) * For RGMII PHY there is no way to access it so the fixed PHY should * be used. For SGMII PHY the supporting code will be added later. */ - if (addr >= dev->phy_port_cnt) { + if (!dev->info->internal_phy[addr]) { struct ksz_port *p = &dev->ports[addr]; switch (reg) { @@ -307,23 +323,25 @@ void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) break; } } else { - ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); + ret = ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); + if (ret) + return ret; + + ksz9477_r_phy_quirks(dev, addr, reg, &val); } *data = val; + + return 0; } -void ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) +int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) { /* No real PHY after this. */ - if (addr >= dev->phy_port_cnt) - return; + if (!dev->info->internal_phy[addr]) + return 0; - /* No gigabit support. Do not write to this register. */ - if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000) - return; - - ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); } void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) @@ -869,7 +887,7 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) phy_interface_t interface; bool gbit; - if (port < dev->phy_port_cnt) + if (dev->info->internal_phy[port]) return PHY_INTERFACE_MODE_NA; gbit = ksz_get_gbit(dev, port); @@ -914,7 +932,7 @@ static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) /* Energy Efficient Ethernet (EEE) feature select must * be manually disabled (except on KSZ8565 which is 100Mbit) */ - if (dev->features & GBIT_SUPPORT) + if (dev->info->gbit_capable[port]) ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); /* Register settings are required to meet data sheet @@ -941,10 +959,35 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE | MAC_SYM_PAUSE; - if (dev->features & GBIT_SUPPORT) + if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; } +int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) +{ + u32 secs = msecs / 1000; + u8 value; + u8 data; + int ret; + + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); + + ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); + if (ret < 0) + return ret; + + data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); + if (ret < 0) + return ret; + + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + + return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); +} + void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { struct dsa_switch *ds = dev->ds; @@ -976,7 +1019,7 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* enable 802.1p priority */ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); - if (port < dev->phy_port_cnt) { + if (dev->info->internal_phy[port]) { /* do not force flow control */ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, @@ -999,7 +1042,7 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz9477_cfg_port_member(dev, port, member); /* clear pending interrupts */ - if (port < dev->phy_port_cnt) + if (dev->info->internal_phy[port]) ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); } @@ -1051,25 +1094,13 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) /* enable cpu port */ ksz9477_port_setup(dev, i, true); - p->on = 1; } } for (i = 0; i < dev->info->port_cnt; i++) { if (i == dev->cpu_port) continue; - p = &dev->ports[i]; - ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); - p->on = 1; - if (i < dev->phy_port_cnt) - p->phy = 1; - if (dev->chip_id == 0x00947700 && i == 6) { - p->sgmii = 1; - - /* SGMII PHY detection code is not implemented yet. */ - p->phy = 0; - } } } @@ -1158,29 +1189,6 @@ int ksz9477_switch_init(struct ksz_device *dev) if (ret) return ret; - ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8); - if (ret) - return ret; - - /* Number of ports can be reduced depending on chip. */ - dev->phy_port_cnt = 5; - - /* Default capability is gigabit capable. */ - dev->features = GBIT_SUPPORT; - - if (dev->chip_id == KSZ9893_CHIP_ID) { - dev->features |= IS_9893; - - /* Chip does not support gigabit. */ - if (data8 & SW_QW_ABLE) - dev->features &= ~GBIT_SUPPORT; - dev->phy_port_cnt = 2; - } else { - /* Chip does not support gigabit. */ - if (!(data8 & SW_GIGABIT_ABLE)) - dev->features &= ~GBIT_SUPPORT; - } - return 0; } |